- 14 Apr, 2014 40 commits
-
-
Thomas Pugliese authored
commit f74b75e7 upstream. change WA_SEGS_MAX to a number that is legal according to the WUSB spec. Signed-off-by:
Thomas Pugliese <thomas.pugliese@gmail.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Pugliese authored
commit 7b6bc07a upstream. For isochronous endpoints, set the RPIPE wMaxPacketSize value using wOverTheAirPacketSize from the endpoint companion descriptor instead of wMaxPacketSize from the normal endpoint descriptor. Signed-off-by:
-
David Cohen authored
commit 85601f8c upstream. Add PCI id for Intel Merrifield Signed-off-by:
David Cohen <david.a.cohen@linux.intel.com> Signed-off-by:
-
Heikki Krogerus authored
commit b62cd96d upstream. Add PCI id for Intel BayTrail. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Cc: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Sarah Sharp authored
commit dcc01c08 upstream. Before the USB core resets a device, we need to disable the L1 timeout for the roothub, if USB 2.0 Link PM is enabled. Otherwise the port may transition into L1 in between descriptor fetches, before we know if the USB device descriptors changed. LPM will be re-enabled after the full device descriptors are fetched, and we can confirm the device still supports USB 2.0 LPM after the reset. We don't need to wait for the USB device to exit L1 before resetting the device, since the xHCI roothub port diagrams show a transition to the Reset state from any of the Ux states (see Figure 34 in the 2012-08-14 xHCI specification update). This patch should be backported to kernels as old as 3.2, that contain the commit 65580b43 "xHCI: set USB2 hardware LPM". That was the first commit to enable USB 2.0 hardware-driven Link Power Management. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Alan Stern authored
commit f875fdbf upstream. Since uhci-hcd, ehci-hcd, and xhci-hcd support runtime PM, the .pm field in their pci_driver structures should be protected by CONFIG_PM rather than CONFIG_PM_SLEEP. The corresponding change has already been made for ohci-hcd. Without this change, controllers won't do runtime suspend if system suspend or hibernation isn't enabled. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Alan Stern authored
commit 9d892429 upstream. This patch fixes a build error that occurs when CONFIG_PM is enabled and CONFIG_PM_SLEEP isn't: >> drivers/usb/host/ohci-pci.c:294:10: error: 'usb_hcd_pci_pm_ops' undeclared here (not in a function) .pm = &usb_hcd_pci_pm_ops Since the usb_hcd_pci_pm_ops structure is defined and used when CONFIG_PM is enabled, its declaration should not be protected by CONFIG_PM_SLEEP. Signed-off-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Alan Stern authored
commit 69820e01 upstream. Since ohci-hcd supports runtime PM, the .pm field in its pci_driver structure should be protected by CONFIG_PM rather than CONFIG_PM_SLEEP. Without this change, OHCI controllers won't do runtime suspend if system suspend or hibernation isn't enabled. Signed-off-by:
-
Johan Hovold authored
commit ff8a43c1 upstream. Make sure to fail properly if the device is not accepted during attach in order to avoid null-pointer derefs (of missing interface private data) at disconnect or release. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit e877dd2f upstream. Fix endianess bugs in firmware handling introduced by commits cb7a7c6a ("ti_usb_3410_5052: add Multi-Tech modem support") and 05a3d905 ("ti_usb_3410_5052: support alternate firmware") which made the driver use the wrong firmware for certain devices on big-endian machines. Signed-off-by:
-
Johan Hovold authored
commit d482b9d5 upstream. Make sure the reported device-type on big-endian machines is the same as on little-endian ones. Signed-off-by:
-
Johan Hovold authored
commit d8a083cc upstream. Fix race in mos7840_get_reg which unconditionally manipulated the control urb (which may already be in use) by adding a control-urb busy flag. Signed-off-by:
-
Johan Hovold authored
commit 5f8a2e68 upstream. Allocated urbs and buffers were never freed on errors in open. Signed-off-by:
-
Johan Hovold authored
commit 2d8f4447 upstream. Do not use uninitialised termios data to determine when to configure the device at open. This also prevents stack data from leaking to userspace in the OOM error path. Signed-off-by:
-
Johan Hovold authored
commit 5e4211f1 upstream. Do not use uninitialised termios data to determine when to configure the device at open. Signed-off-by:
-
Richard Weinberger authored
commit 8a2f132a upstream. The Option GTM681W uses a qualcomm chip and can be served by the qcserial device driver. Signed-off-by:
Richard Weinberger <richard@nod.at> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
George Cherian authored
commit 5bf8fae3 upstream. we never allocate a TRB pool for physical endpoints 0 and 1 so trying to free it (a invalid TRB pool pointer) will lead us in a warning while removing dwc3.ko module. In order to fix the situation, all we have to do is skip dwc3_free_trb_pool() for physical endpoints 0 and 1 just as we while deleting endpoints from the endpoints list. Signed-off-by:
George Cherian <george.cherian@ti.com> Signed-off-by:
-
Adrian Thomasset authored
commit 71d9a2b9 upstream. The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports. The first two ports are reserved for the JTAG interface. We enable by default ports 2 and 3 as UARTs (where port 2 is a conventional RS-232 UART) Signed-off-by:
Adrian Thomasset <adrian.thomasset@st.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Ming Lei authored
commit eba0e3c3 upstream. Johan's 'fix use-after-free in TIOCMIWAIT' patchset[1] introduces one bug which can cause kernel hang when opening port. This patch initialized the 'port->delta_msr_wait' waitqueue head to fix the bug which is introduced in 3.9-rc4. [1], http://marc.info/?l=linux-usb&m=136368139627876&w=2Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Acked-by:
-
Johan Hovold authored
commit 3668b9c1 upstream. commit fc98ab87 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 43a66b4c upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit d1baabc8 upstream. commit dbcea761 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 40509ca9 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 8edfdab3 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit a14430db upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit e670c6af upstream. Make sure waiting processes are woken on modem-status changes. Currently processes are only woken on termios changes regardless of whether the modem status has changed. Signed-off-by:
-
Johan Hovold authored
commit cf1d2444 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 7b245969 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 33357625 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 71ccb9b0 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. When switching to tty ports, some lifetime assumptions were changed. Specifically, close can now be called before the final tty reference is dropped as part of hangup at device disconnect. Even with the ftdi private-data refcounting this means that the port private data can be freed while a process is sleeping on modem-status changes and thus cannot be relied on to detect disconnects when woken up. Signed-off-by:
-
Johan Hovold authored
commit 356050d8 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Also remove bogus test for private data pointer being NULL as it is never assigned in the loop. Signed-off-by:
-
Johan Hovold authored
commit fa1e11d5 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 50188603 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit e5b33dc9 upstream. Add modem-status-change wait queue to struct usb_serial_port that subdrivers can use to implement TIOCMIWAIT. Currently subdrivers use a private wait queue which may have been released when waking up after device disconnected. Note that we're adding a new wait queue rather than reusing the tty-port one as we do not want to get woken up at hangup (yet). Signed-off-by:
-
David Henningsson authored
commit 18dcd304 upstream. The internal mic input is phase inverted on one channel. To avoid people in userspace summing the channels together and get zero result, use a separate mixer control for the inverted channel. BugLink: https://bugs.launchpad.net/bugs/903853Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> [wml: Backported to 3.4: - Adjust context - one more enum value CXT_PINCFG_LENOVO_TP410 - Change both invocations of apply_pin_fixup()] Signed-off-by:
Weng Meiling <wengmeiling.weng@huawei.com>
-
Takashi Iwai authored
commit 6169b673 upstream. We've seen the broken HDMI *video* output on some machines with GM965, and the debugging session pointed that the culprit is the disabled audio output pins. Toggling these pins dynamically on demand caused flickering of HDMI TV. This patch changes the behavior to keep the pin ON constantly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51421Signed-off-by:
-
David Henningsson authored
commit 7ed4165e upstream. This reverts commit 697c373e. The original patch was meant to remove clicking, but in fact caused even more clicking instead. Thanks to c4pp4 for doing most of the work with this bug. BugLink: https://bugs.launchpad.net/bugs/886975Signed-off-by:
-
Takashi Iwai authored
commit 61d648fb upstream. These are almost compatible with the older Conexant codecs. Signed-off-by:
-
Takashi Iwai authored
commit 9ddf1aeb upstream. For non-snoop mode, we fiddle with the page attributes of CORB/RIRB and the position buffer, but also the ring buffers. The problem is that the current code blindly assumes that the buffer is contiguous. However, the ring buffers may be SG-buffers, thus a wrong vmapped address is passed there, leading to Oops. This patch fixes the handling for SG-buffers. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=800701Signed-off-by:
-
Takashi Iwai authored
commit edac8943 upstream. snd-aloop driver has no proper PM implementation, thus the PM resume may trigger Oops due to leftover timer instance. This patch adds the missing suspend/resume implementation. Reported-and-tested-by:
El boulangero <elboulangero@gmail.com> Signed-off-by:
-
