- 28 Apr, 2014 3 commits
-
-
Jouni Malinen authored
This extends NL80211_CMD_SET_CHANNEL to allow dynamic channel bandwidth changes in AP mode (including P2P GO) during a lifetime of the BSS. This can be used to implement, e.g., HT 20/40 MHz co-existence rules on the 2.4 GHz band. Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Zhao, Gang authored
P2P_DEVICE doesn't support ieee80211_bss_info_change_notify() for now, so it's not needed to set changed flags for P2P_DEVICE. Signed-off-by:
Zhao, Gang <gamerh2o@gmail.com> Signed-off-by:
-
Zhao, Gang authored
ieee80211_assign_chanctx() checks if local->use_chanctx is true, so the two code block related to ieee80211_assign_chanctx() can be moved into above if clause, emphasize that these code are executed only if local->use_chanctx is true. Signed-off-by:
-
- 25 Apr, 2014 22 commits
-
-
Rostislav Lisovy authored
Current code checks if the 20MHz bandwidth is allowed for particular channel -- if it is not, the channel is disabled. Since we need to use 5/10 MHz channels, this code is modified in the way that the default bandwidth to check is 5MHz. If the maximum bandwidth allowed by the channel is smaller than 5MHz, the channel is disabled. Otherwise the channel is used and the flags are set according to the bandwidth allowed by the channel. Signed-off-by:
Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by:
-
Rostislav Lisovy authored
Since there are frequency bands (e.g. 5.9GHz) allowing channels with only 10 or 5 MHz bandwidth, this patch adds attributes that allow keeping track about this information. When channel attributes are reported to user-space, make sure to not break old tools, i.e. if the 'split wiphy dump' is enabled, report the extra attributes (if present) describing the bandwidth restrictions. If the 'split wiphy dump' is not enabled, completely omit those channels that have flags set to either IEEE80211_CHAN_NO_10MHZ or IEEE80211_CHAN_NO_20MHZ. Add the check for new bandwidth restriction flags in cfg80211_chandef_usable() to comply with the restrictions. Signed-off-by:
-
Zhao, Gang authored
Return NOTIFY_DONE if we don't care this time's notification, return NOTIFY_OK if we successfully handled this time's notification. That's the formal way to do it. Signed-off-by:
-
Zhao, Gang authored
Return NOTIFY_DONE if we don't care this time's notification, return NOTIFY_OK if we successfully handled this time's notification. That's the formal way to do it. Signed-off-by:
-
Zhao, Gang authored
Name wiphy_to_rdev is more accurate to describe what the function does, i.e., return a pointer pointing to struct cfg80211_registered_device. Signed-off-by:
-
Zhao, Gang authored
Name "dev" is too common and ambiguous, let all the pointer name pointing to struct cfg80211_registered_device be "rdev". This can improve code readability and consistency(since other places have already called it rdev). Signed-off-by:
-
Zhao, Gang authored
The BUG_ON(!err) can't be triggered in the code path, so remove it. Signed-off-by:
-
Zhao, Gang authored
And some code style changes in the function, and correct a typo in comment. Signed-off-by:
-
Marek Kwaczynski authored
Some chips can encrypt managment frames in HW, but require generated IV in the frame. Add a key flag that allows us to achieve this. Signed-off-by:
Marek Kwaczynski <marek.kwaczynski@tieto.com> [use BIT(0) to fill that spot, fix indentation] Signed-off-by:
-
Michal Kazior authored
It doesn't make much sense to store refcount in the chanctx structure. One still needs to hold chanctx_mtx to get the value safely. Besides, refcount isn't on performance critical paths. This will make implementing chanctx reservation refcounting a little easier. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
-
Michal Kazior authored
Channel context refcount is protected by chanctx_mtx. Accessing the value without holding the mutex is racy. RCU section didn't guarantee anything here. Theoretically ieee80211_channel_switch() could fail to see refcount change and read "1" instead of, e.g. "2". This means mac80211 could accept CSA even though it shouldn't have. Signed-off-by:
-
Michal Kazior authored
The function did a little too much. Split it up so the code can be easily reused in the future. Signed-off-by:
-
Michal Kazior authored
The function did a little too much. Split it up so the code can be easily reused in the future. Signed-off-by:
-
Michal Kazior authored
Use a separate function to look for reservation chanctx. For multi-interface/channel reservation search sematics differ slightly. The new routine allows reservations to be merged with chanctx that are already reserved by other interface(s). Signed-off-by:
-
Michal Kazior authored
This allows new vifs to be assigned to a chanctx as long as chanctx's reservation chandefs (if any) and chanctx's current chandef (implied by assigned vifs at the time, if any) and the new vif chandef are all compatible. This implies it is impossible to assign a new vif to an in-place reservation chanctx. This gives no advantages for single-channel hardware. It makes sense for multi-channel hardware only. Signed-off-by:
-
Michal Kazior authored
This can be useful. Provides a more straghtforward way to iterate over interfaces taking part in chanctx reservation and allows tracking chanctx usage explicitly. The structure is protected by local->chanctx_mtx. Signed-off-by:
-
Michal Kazior authored
This can be useful. Provides a more straghtforward way to iterate over interfaces bound to a given chanctx and allows tracking chanctx usage explicitly. The structure is protected by local->chanctx_mtx. Signed-off-by:
-
Michal Kazior authored
Initial chanctx reservation code wasn't aware of radar detection requirements. This is necessary for chanctx reservations to be used for channel switching in the future. Signed-off-by:
-
Michal Kazior authored
Do not allocate more channel contexts than a driver is capable for currently matching interface combination. This allows the ieee80211_vif_reserve_chanctx() to act as a guard against breaking interface combinations. Signed-off-by:
-
Michal Kazior authored
The utility function has no uses yet. It is aimed at future chanctx reservation management and channel switching. Signed-off-by:
-
Michal Kazior authored
The patch splits cfg80211_check_combinations() into an iterator function and a simple iteration user. This makes it possible for drivers to asses how many channels can use given iftype setup. This in turn can be used for future multi-interface/multi-channel channel switching. Signed-off-by:
-
Ilan Peer authored
At some locations, channels 149-165 are considered a single bundle, while at some other locations, e.g., Indonesia, channels 149-161 are considered a single bundle, while channel 165 belongs to a different bundle. This means that: 1. A station interface connection to an AP on channel 165 allows the instantiation of a P2P GO on channels 149-165. 2. A station interface connection to an AP on channels 149-161 does NOT allow the instantiation of a P2P GO on channel 165. Fix this. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
- 22 Apr, 2014 6 commits
-
-
Bob Copeland authored
When a path target responds to a path request, its response always contains the most up-to-date information; accordingly, it should use the latest target_sn, regardless of net_traversal_jiffies(). Otherwise, only the first path response is considered when constructing a path, as it will have the highest target_sn of all replies during that period. Signed-off-by:
Bob Copeland <bob@cozybit.com> Signed-off-by:
-
Bob Copeland authored
Previously, the code to copy the RSN IE from the mesh config would increment its pointer by one in the loop instead of by the element length, so there was the potential for mistaking another IE's data fields as the RSN IE. cfg80211_find_ie() exists, so just use that. Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Bob Copeland authored
u16_field_get() is a simple wrapper around get_unaligned_le16(), and it is being assigned to a u16, so there's no need to promote to u32 in the middle. Signed-off-by:
-
Jouni Malinen authored
This can be useful for testing purposes to confirm valid AP behavior on HT 20/40 co-existence functionality. Signed-off-by:
-
Luis R. Rodriguez authored
This allows processing of the last regulatory request when we determine its still pending. Without this if a regulatory request failed to get processed by userspace we wouldn't be able to re-process it later. An example situation that can lead to an unprocessed last_request is enabling cfg80211 to be built-in to the kernel, not enabling CFG80211_INTERNAL_REGDB and the CRDA binary not being available at the time the udev rule that kicks of CRDA triggers. In such a situation we want to let some cfg80211 triggers eventually kick CRDA for us again. Without this if the first cycle attempt to kick off CRDA failed we'd be stuck without the ability to change process any further regulatory domains. cfg80211 will trigger re-processing of the regulatory queue whenever schedule_work(®_work) is called, currently this happens when: * suspend / resume * disconnect * a beacon hint gets triggered (non DFS 5 GHz AP found) * a regulatory request gets added to the queue We don't have any specific opportunistic late boot triggers to address a late mount of where CRDA resides though, adding that should be done separately through another patch. Without an opportunistic fix then this fix relies at least one of the triggeres above to happen. Reported-by:
Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by:
Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by:
-
Arik Nemtsov authored
Avoid freeing the last request while it is being processed. This can happen in some cases if reg_work is kicked for some reason while the currently pending request is in flight. Cc: Sander Eikelenboom <linux@eikelenboom.it> Tested-by:
Eliad Peller <eliad@wizery.com> Tested-by:
Colleen Twitty <colleen@cozybit.com> Signed-off-by:
Arik Nemtsov <arik@wizery.com> Signed-off-by:
-
- 11 Apr, 2014 1 commit
-
-
Janusz Dziedzic authored
Set DFS CAC time also in case of using custom and strict regulatory from drivers. In other case we could have unset DFS CAC time directly after driver loaded and before issue regulatory set from user mode. Signed-off-by:
Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by:
-
- 10 Apr, 2014 3 commits
-
-
Johannes Berg authored
When looking for a BSS matching given parameters, ignore invalid BSSIDs. This avoids, for example, trying to join an IBSS that has a multicast BSSID, which isn't supported by all drivers nor is it a valid configuration of the IBSS so better create a new one with a correctly chosen random BSSID. Signed-off-by: -
Johannes Berg authored
Don't allow using a multicast address as the BSSID, that isn't a valid configuration. Signed-off-by: -
Zhao, Gang authored
cfg80211_wext_freq() is declared in wext-compat.h, but its parameter struct wiphy's declaration is not included there. As the parameter isn't used, just remove it. Signed-off-by:
-
- 09 Apr, 2014 5 commits
-
-
Zhao, Gang authored
Some header files in mac80211 don't include all the header files they require, fix that. Signed-off-by:
-
Rostislav Lisovy authored
The channels with 5/10MHz bandwidth are not HT. We have to reflect this in conf_is_ht() function which returns whether the particular channel is HT or not. Signed-off-by:
-
Kalle Valo authored
Commit a2f73b6c ("cfg80211: move regulatory flags to their own variable") renamed WIPHY_FLAG_CUSTOM_REGULATORY to REGULATORY_CUSTOM_REG, but missed to update one comment. Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Pawel Kulakowski authored
This allows user-space (wpa_supplicant) to disable LDPC coding. Signed-off-by:
Pawel Kulakowski <pawel.kulakowski@tieto.com> Signed-off-by:
-
Michal Kazior authored
All bits from radar_detect must match combination radar bitmask. Otherwise it is theoretically possible to lead into an invalid combination provided a driver reports strange combinations. Signed-off-by:
-
