- 20 Dec, 2020 2 commits
-
-
Lorenzo Bianconi authored
Similar to mmio code path, remove wake logic in mt76u_status_worker handler. Starting from commit 90d494c9 ("mt76: improve tx queue stop/wake")', the wake queue logic on the usb status path is no longer necessary since the hw queues are no longer stopped on the mt76 tx path. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/00009bf0cfdc9565e4432cad3ed51888c667c25d.1607164041.git.lorenzo@kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git fixes for 5.11. Major changes: ath11k * add null check for skb allocation * fix crash found during connect/disconnect stress testing * fix for HT disabled case * brown paperbag fixes for my bugs in suspend code * fix an unnecessary qmi allocation during firmware bootup * disable ASPM during firmware bootup to avoid issues
-
- 18 Dec, 2020 2 commits
-
-
Carl Huang authored
Sometimes QCA6390 doesn't switch to amss state as device enters L1ss state, so disable L0sL1s during firmware downloading. Driver recovers the ASPM to default value in start callback or powerdown callback. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
Carl Huang <cjhuang@codeaurora.org> Signed-off-by:
-
Carl Huang authored
Not all firmware versions support allocating DMA memory in smaller blocks so first try to allocate big block of DMA memory for QMI. If the allocation fails, let firmware request multiple blocks of DMA memory with smaller size. This also fixes an unnecessary error message seen during ath11k probe on QCA6390: ath11k_pci 0000:06:00.0: Respond mem req failed, result: 1, err: 0 ath11k_pci 0000:06:00.0: qmi failed to respond fw mem req:-22 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
- 17 Dec, 2020 7 commits
-
-
Ping-Ke Shih authored
request_firmware_nowait() which schedules another work is used to load firmware when USB is probing. If USB is unplugged before running the firmware work, it goes disconnect ops, and then causes use-after-free. Though we wait for completion of firmware work before freeing the hw, firmware callback rises completion too early. So I move it to the last step. usb 5-1: Direct firmware load for rtlwifi/rtl8192cufw.bin failed with error -2 rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin rtlwifi: Selected firmware is not available ================================================================== BUG: KASAN: use-after-free in rtl_fw_do_work.cold+0x68/0x6a drivers/net/wireless/realtek/rtlwifi/core.c:93 Write of size 4 at addr ffff8881454cff50 by task kworker/0:6/7379 CPU: 0 PID: 7379 Comm: kworker/0:6 Not tainted 5.10.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events request_firmware_work_func Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x4c8 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562 rtl_fw_do_work.cold+0x68/0x6a drivers/net/wireless/realtek/rtlwifi/core.c:93 request_firmware_work_func+0x12c/0x230 drivers/base/firmware_loader/main.c:1079 process_one_work+0x933/0x1520 kernel/workqueue.c:2272 worker_thread+0x64c/0x1120 kernel/workqueue.c:2418 kthread+0x38c/0x460 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296 The buggy address belongs to the page: page:00000000f54435b3 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1454cf flags: 0x200000000000000() raw: 0200000000000000 0000000000000000 ffffea00051533c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881454cfe00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8881454cfe80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff8881454cff00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8881454cff80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8881454d0000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Reported-by: syzbot+65be4277f3c489293939@syzkaller.appspotmail.com Signed-off-by:Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Lorenzo Bianconi authored
Fix the following NULL pointer dereference in mt76u_status_worker that can occur if status thread runs before allocating tx queues [ 31.395373] BUG: kernel NULL pointer dereference, address: 000000000000002c [ 31.395769] #PF: supervisor read access in kernel mode [ 31.395985] #PF: error_code(0x0000) - not-present page [ 31.396178] PGD 0 P4D 0 [ 31.396277] Oops: 0000 [#1] SMP [ 31.396430] CPU: 3 PID: 337 Comm: mt76-usb-status Not tainted 5.10.0-rc1-kvm+ #49 [ 31.396703] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-3.fc33 04/01/2014 [ 31.397048] RIP: 0010:mt76u_status_worker+0x2b/0x190 [ 31.397931] RSP: 0018:ffffc9000076fe98 EFLAGS: 00010282 [ 31.398118] RAX: 0000000000000001 RBX: ffff888111203fe8 RCX: 0000000000000000 [ 31.398400] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff888111203fe8 [ 31.398668] RBP: ffff888111201d00 R08: 000000000000038c R09: 000000000000009b [ 31.398952] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 31.399235] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810c987300 [ 31.399494] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000 [ 31.399767] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 31.399991] CR2: 000000000000002c CR3: 0000000103525000 CR4: 00000000000006a0 [ 31.400236] Call Trace: [ 31.400348] ? schedule+0x3e/0xa0 [ 31.400514] __mt76_worker_fn+0x71/0xa0 [ 31.400634] ? mt76_get_min_avg_rssi+0x110/0x110 [ 31.400827] kthread+0x118/0x130 [ 31.400984] ? __kthread_bind_mask+0x60/0x60 [ 31.401212] ret_from_fork+0x1f/0x30 [ 31.401353] Modules linked in: [ 31.401480] CR2: 000000000000002c [ 31.401627] ---[ end trace 8bf174505cc34851 ]--- [ 31.401798] RIP: 0010:mt76u_status_worker+0x2b/0x190 [ 31.402636] RSP: 0018:ffffc9000076fe98 EFLAGS: 00010282 [ 31.402829] RAX: 0000000000000001 RBX: ffff888111203fe8 RCX: 0000000000000000 [ 31.403118] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff888111203fe8 [ 31.403424] RBP: ffff888111201d00 R08: 000000000000038c R09: 000000000000009b [ 31.403689] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 31.403933] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810c987300 [ 31.404209] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000 [ 31.404482] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 31.404726] CR2: 000000000000002c CR3: 0000000103525000 CR4: 00000000000006a0 [ 31.405294] mt76x0u: probe of 1-1:1.0 failed with error -110 [ 31.406007] usb 1-1: USB disconnect, device number 2 [ 31.840756] usb 1-1: new high-speed USB device number 3 using xhci_hcd [ 32.461295] usb 1-1: reset high-speed USB device number 3 using xhci_hcd [ 32.659932] mt76x0u 1-1:1.0: ASIC revision: 76100002 MAC revision: 76502000 [ 33.197032] mt76x0u 1-1:1.0: EEPROM ver:02 fae:01 Fixes: 9daf27e6 ("mt76: mt76u: use dedicated thread for status work") Signed-off-by:
-
Dan Carpenter authored
All these conditions are reversed so presumably most of the function is dead code. This caused a spurious warning: [ 95.734922] ath11k_pci 0000:06:00.0: failed to set sysclk: 0 Fixes: 06999407 ("ath11k: pci: fix L1ss clock unstable problem") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The "if (!ret)" condition is inverted and it should be "if (ret)". It means that we return success when we had intended to return an error code. This also caused a spurious warning even when the suspend was successful: [ 297.186612] ath11k_pci 0000:06:00.0: failed to suspend hif: 0 Fixes: d1b0c338 ("ath11k: implement suspend for QCA6390 PCI devices") Signed-off-by:
-
Carl Huang authored
For QCA6390, bss peer must be created before vdev is to start. This change is to start vdev if a bss peer is created. Otherwise, ath11k delays to start vdev. This fixes an issue in a case where HT/VHT/HE settings change between authentication and association, e.g., due to the user space request to disable HT. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Carl Huang authored
During connect and disconnect stress test, crashed happened because ar->rx_channel is NULL. Fix it by checking whether ar->rx_channel is NULL. Crash stack is as below: RIP: 0010:ath11k_dp_rx_h_ppdu+0x110/0x230 [ath11k] [ 5028.808963] ath11k_dp_rx_wbm_err+0x14a/0x360 [ath11k] [ 5028.808970] ath11k_dp_rx_process_wbm_err+0x41c/0x520 [ath11k] [ 5028.808978] ath11k_dp_service_srng+0x25e/0x2d0 [ath11k] [ 5028.808982] ath11k_pci_ext_grp_napi_poll+0x23/0x80 [ath11k_pci] [ 5028.808986] net_rx_action+0x27e/0x400 [ 5028.808990] __do_softirq+0xfd/0x2bb [ 5028.808993] irq_exit+0xa6/0xb0 [ 5028.808995] do_IRQ+0x56/0xe0 [ 5028.808997] common_interrupt+0xf/0xf Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Colin Ian King authored
Currently the null check on a newly allocated skb is missing and this can lead to a null pointer dereference is the allocation fails. Fix this by adding a null check and returning -ENOMEM. Addresses-Coverity: ("Dereference null return") Fixes: 43ed15e1 ("ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 13 Dec, 2020 1 commit
-
-
Xie He authored
According to the X.25 documentation, there was a plan to implement X.25-over-802.2-LLC. It never finished but left various code stubs in the X.25 code. At this time it is unlikely that it would ever finish so it may be better to remove those code stubs. Also change the documentation to make it clear that this is not a ongoing plan anymore. Change words like "will" to "could", "would", etc. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201209033346.83742-1-xie.he.0141@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 12 Dec, 2020 27 commits
-
-
SeongJae Park authored
On a few of our systems, I found frequent 'unshare(CLONE_NEWNET)' calls make the number of active slab objects including 'sock_inode_cache' type rapidly and continuously increase. As a result, memory pressure occurs. In more detail, I made an artificial reproducer that resembles the workload that we found the problem and reproduce the problem faster. It merely repeats 'unshare(CLONE_NEWNET)' 50,000 times in a loop. It takes about 2 minutes. On 40 CPU cores / 70GB DRAM machine, the available memory continuously reduced in a fast speed (about 120MB per second, 15GB in total within the 2 minutes). Note that the issue don't reproduce on every machine. On my 6 CPU cores machine, the problem didn't reproduce. 'cleanup_net()' and 'fqdir_work_fn()' are functions that deallocate the relevant memory objects. They are asynchronously invoked by the work queues and internally use 'rcu_barrier()' to ensure safe destructions. 'cleanup_net()' works in a batched maneer in a single thread worker, while 'fqdir_work_fn()' works for each 'fqdir_exit()' call in the 'system_wq'. Therefore, 'fqdir_work_fn()' called frequently under the workload and made the contention for 'rcu_barrier()' high. In more detail, the global mutex, 'rcu_state.barrier_mutex' became the bottleneck. This commit avoids such contention by doing the 'rcu_barrier()' and subsequent lightweight works in a batched manner, as similar to that of 'cleanup_net()'. The fqdir hashtable destruction, which is done before the 'rcu_barrier()', is still allowed to run in parallel for fast processing, but this commit makes it to use a dedicated work queue instead of the 'system_wq', to make sure that the number of threads is bounded. Signed-off-by:
SeongJae Park <sjpark@amazon.de> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201211112405.31158-1-sjpark@amazon.comSigned-off-by:
-
Krzysztof Kozlowski authored
If interrupt trigger is not set when requesting the interrupt, the core will take care of reading trigger type from Devicetree. There is no point to do it in the driver. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210211824.214949-1-krzk@kernel.orgSigned-off-by:
-
DENG Qingfang authored
MT7530 has a global RX length register, so we are actually changing its MRU. Enable MTU normalization for this reason. Signed-off-by:
DENG Qingfang <dqfext@gmail.com> Acked-by:
Landen Chao <landen.chao@mediatek.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20201210170322.3433-1-dqfext@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextJakub Kicinski authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2020-12-12 Just one patch this time: 1) Redact the SA keys with kernel lockdown confidentiality. If enabled, no secret keys are sent to uuserspace. From Antony Antony. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: redact SA secret with lockdown confidentiality ==================== Link: https://lore.kernel.org/r/20201212085737.2101294-1-steffen.klassert@secunet.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-drivers-next-2020-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.11 Second set of patches for v5.11. iwlwifi gaining support for the new 6 GHz band and rtw88 got a new channel. Lots of new features for mt76 and ath11k now has working suspend for PCI devices. And as always, smaller fixes and cleanups all over. Major changes: rtw88 * add support for channel 144 mt76 * support for more sta interfaces on mt7615/mt7915 * mt7915 encapsulation offload * performance improvements * channel noise report on mt7915 * mt7915 testmode support * mt7915 DBDC support iwlwifi * support 6 GHz band ath11k * suspend support for QCA6390 PCI devices * support TXOP duration based RTS threshold * mesh: add support for 256 bitmap in blockack frames in 11ax * tag 'wireless-drivers-next-2020-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (197 commits) ath11k: implement suspend for QCA6390 PCI devices ath11k: hif: add ce irq enable and disable functions ath11k: implement WoW enable and wakeup commands ath11k: set credit_update flag for flow controlled ep only ath11k: dp: stop rx pktlog before suspend ath11k: htc: implement suspend handling ath11k: htc: remove unused struct ath11k_htc_ops ath11k: pci: read select_window register to ensure write is finished ath11k: hif: implement suspend and resume functions ath11k: mhi: hook suspend and resume ath11k: Fix incorrect tlvs in scan start command ath11k: pci: disable VDD4BLOW ath11k: pci: fix L1ss clock unstable problem ath11k: pci: fix hot reset stability issues ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID ath11k: mhi: print a warning if firmware crashed ath11k: use MHI provided APIs to allocate and free MHI controller ath10k: add atomic protection for device recovery ath10k: add option for chip-id based BDF selection mt76: remove unused variable q ... ==================== Link: https://lore.kernel.org/r/20201212050839.EF50EC433C6@smtp.codeaurora.orgSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'mac80211-next-for-net-next-2020-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== A new set of wireless changes: * validate key indices for key deletion * more preamble support in mac80211 * various 6 GHz scan fixes/improvements * a common SAR power limitations API * various small fixes & code improvements * tag 'mac80211-next-for-net-next-2020-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits) mac80211: add ieee80211_set_sar_specs nl80211: add common API to configure SAR power limitations mac80211: fix a mistake check for rx_stats update mac80211: mlme: save ssid info to ieee80211_bss_conf while assoc mac80211: Update rate control on channel change mac80211: don't filter out beacons once we start CSA mac80211: Fix calculation of minimal channel width mac80211: ignore country element TX power on 6 GHz mac80211: use bitfield helpers for BA session action frames mac80211: support Rx timestamp calculation for all preamble types mac80211: don't set set TDLS STA bandwidth wider than possible mac80211: support driver-based disconnect with reconnect hint cfg80211: support immediate reconnect request hint mac80211: use struct assignment for he_obss_pd cfg80211: remove struct ieee80211_he_bss_color nl80211: validate key indexes for cfg80211_registered_device cfg80211: include block-tx flag in channel switch started event mac80211: disallow band-switch during CSA ieee80211: update reduced neighbor report TBTT info length cfg80211: Save the regulatory domain when setting custom regulatory ... ==================== Link: https://lore.kernel.org/r/20201211142552.209018-1-johannes@sipsolutions.netSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.11. Major changes: ath11k * suspend support for QCA6390 PCI devices * support TXOP duration based RTS threshold * mesh: add support for 256 bitmap in blockack frames in 11ax
-
Carl Huang authored
Now that all the needed pieces are in place implement suspend support QCA6390 PCI devices. All other devices will return -EOPNOTSUPP during suspend. The suspend is implemented by switching the firmware to WoW mode during suspend, so the firmware will be running on low power mode while host is in suspend. At the moment we are not able to shutdown and fully power off the device due to bugs in MHI subsystem, so WoW mode is a workaround for the time being. During suspend we enable WoW mode, disable CE irq and DP irq, then put MHI to suspend state. During resume, driver resumes MHI firstly, then enables CE irq and dp IRQ, and sends WoW wakeup command to firmware. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Carl Huang authored
Add ce irq enable and disable hif layer functions, so core module can enable enable them without cleaning pipe and refilling pipe. Needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Carl Huang authored
Implement wow enable ane wow wakeup commands which are needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Carl Huang authored
Firmware will check all the pipes before entering WoW mode during suspend. If ATH11K_HTC_FLAG_NEED_CREDIT_UPDATE is set, firmware treats this pipe needed to return credit even though it's actually not required. If any pipe needs to return credit, the suspend_complete message doesn't send to host but is dropped. So host gets time out and WoW suspend failed. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Carl Huang authored
Stop dp rx pktlog when entering suspend and reap the mon_status buffer to keep it empty. During resume restart the reap timer. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Carl Huang authored
When ath11k sends suspend command to firmware, firmware will return suspend_complete events and add handlers for those. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Kalle Valo authored
No need for it so remove. Compile tested only. Signed-off-by:
-
Carl Huang authored
Just when resume from WoW, the write to select_window doesn't take effect immediately, so read the register again to ensure the write operation is finished. Another change is to reset select_window to ZERO because this register isn't restored after WoW, so the content of this register becomes ZERO too. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Carl Huang authored
For suspend support add suspend and resume to HIF layer. These ops are optional and, for example, AHB bus driver does not need to implement these. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Carl Huang authored
MHI suspend and resume isn't hooked in ath11k yet, so hook these functions needed for suspend support. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Pradeep Kumar Chitrapu authored
Currently 6G specific tlvs have duplicate entries which is causing scan failures. Fix this by removing the duplicate entries of the same tlv. This also fixes out-of-bound memory writes caused due to adding tlvs when num_hint_bssid and num_hint_s_ssid are ZEROs. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1 Fixes: 74601ecf ("ath11k: Add support for 6g scan hint") Reported-by:
Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by:
-
Carl Huang authored
It's recommended to disable VDD4BLOW during initialisation. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Carl Huang authored
For QCA6390, one PCI related clock drifts sometimes, and it makes PCI link difficult to quit L1ss. Fix it by writing some registers which are known to fix the problem. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Carl Huang authored
For QCA6390, host needs to reset some registers before MHI power up to fix PCI link unstable issue if hot reset happened. Also clear all pending interrupts during power up. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Carl Huang authored
It's recommended to use wmi command WMI_PDEV_SET_HW_MODE_CMDID to put hardware to dbs mode instead of wmi_init command. This fixes a few strange stability issues. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Kalle Valo authored
There was no way to detect if the firmware crashed so add a warning. At the moment the firmware is not restarted or anything like that, so when this happens ath11k modules need to be reloaded. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Bhaumik Bhatt authored
Use MHI provided APIs to allocate and free MHI controller to improve MHI host driver handling. This also fixes a memory leak as the MHI controller was allocated but never freed. Signed-off-by:
Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
-
Wen Gong authored
When it has more than one restart_work queued meanwhile, the 2nd restart_work is very easy to break the 1st restart work and lead recovery fail. Add a flag to allow only one restart work running untill device successfully recovered. It already has flag ATH10K_FLAG_CRASH_FLUSH, but it can not use this flag again, because it is clear in ath10k_core_start. The function ieee80211_reconfig(called by ieee80211_restart_work) of mac80211 do many things and drv_start(call to ath10k_core_start) is 1st thing, when drv_start complete, it does not mean restart complete. So it add new flag and clear it in ath10k_reconfig_complete, because it is the last thing called from drv_reconfig_complete of function ieee80211_reconfig, after it, the restart process finished. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by:
Wen Gong <wgong@codeaurora.org> Signed-off-by:
-
Abhishek Kumar authored
In some devices difference in chip-id should be enough to pick the right BDF. Add another support for chip-id based BDF selection. With this new option, ath10k supports 2 fallback options. The board name with chip-id as option looks as follows board name 'bus=snoc,qmi-board-id=ff,qmi-chip-id=320' Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2-00696-QCAHLSWMTPL-1 Tested-on: QCA6174 HW3.2 WLAN.RM.4.4.1-00157-QCARMSWPZ-1 Signed-off-by:
Abhishek Kumar <kuabhs@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Rakesh Pillai <pillair@codeaurora.org> Signed-off-by:
-
- 11 Dec, 2020 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull mtd fixes from Miquel Raynal: "Second series of fixes for raw NAND drivers initiated because of a rework of the ECC engine subsystem. The location of the DT parsing logic got moved, breaking several drivers which in fact were not doing the ECC engine initialization at the right place. These drivers have been fixed by enforcing a particular ECC engine type and algorithm, software Hamming, while the algorithm may be overwritten by a DT property. This merge request fixes this in the xway, socrates, plat_nand, pasemi, orion, mpc5121, gpio, au1550 and ams-delta controller drivers" * tag 'mtd/fixes-for-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: xway: Do not force a particular software ECC engine mtd: rawnand: socrates: Do not force a particular software ECC engine mtd: rawnand: plat_nand: Do not force a particular software ECC engine mtd: rawnand: pasemi: Do not force a particular software ECC engine mtd: rawnand: orion: Do not force a particular software ECC engine mtd: rawnand: mpc5121: Do not force a particular software ECC engine mtd: rawnand: gpio: Do not force a particular software ECC engine mtd: rawnand: au1550: Do not force a particular software ECC engine mtd: rawnand: ams-delta: Do not force a particular software ECC engine
-
