1. 27 Aug, 2016 19 commits
  2. 26 Aug, 2016 17 commits
    • David S. Miller's avatar
      Merge branch 'bcm_sf2-utilize-b53_common' · a29ca894
      David S. Miller authored
      Florian Fainelli says:
      
      ====================
      net: dsa: Make bcm_sf2 utilize b53_common
      
      This patch series makes the bcm_sf2 driver utilize a large number of the core
      functions offered by the b53_common driver since the SWITCH_CORE registers are
      mostly register compatible with the switches driven by b53_common.
      
      In order to accomplish that, we just override the dsa_driver_ops callbacks that
      we need to. There are still integration specific logic from the bcm_sf2 that we
      cannot absorb into b53_common because it is just not there, mostly in the area
      of link management and power management, but most of the features are within
      b53_common now: VLAN, FDB, bridge
      
      Along the process, we also improve support for the BCM58xx SoCs, since those
      also have the same version of the switching IP that 7445 has (for which bcm_sf2
      was developed).
      
      Changes in v3:
      
      - rebase against 145dd5f9 ("net: flush the
        softnet backlog in process context")
      
      Changes in v2:
      
      - rebased against "net: dsa: rename switch operations structure"
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a29ca894
    • Florian Fainelli's avatar
      net: dsa: bcm_sf2: Remove duplicate code · de0b9d3b
      Florian Fainelli authored
      Now that we are using b53_common for most VLAN, FDB and bridge
      operations, delete all the redundant code that we had in bcm_sf2.c to
      keep only the integration specific logic that we have to deal with:
      power management, link management and the external interfaces (RGMII,
      MDIO).
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      de0b9d3b
    • Florian Fainelli's avatar
      net: dsa: bcm_sf2: Utilize core B53 driver when possible · f458995b
      Florian Fainelli authored
      The Broadcom Starfighter2 is almost entirely register compatible with
      B53, yet for historical reasons came up first in the tree and is now
      being updated to utilize b53_common.c to the fullest extent possible. A
      few things need to be adjusted to allow that:
      
      - the switch "core" registers currently operate on a 32-bit address,
        whereas b53 passes a page + reg pair to offset from, so we need to
        convert that, thankfully there is a generic formula to do that
      
      - the link managemenent is not self contained with the B53/CORE register
        set, but instead is in the SWITCH_REG block which is part of the
        integration glue logic, so we keep that entirely custom here because
        this really is part of the existing bcm_sf2 implementation
      
      - there are additional power management constraints on the port's
        memories that make us keep the port_enable/disable callbacks custom
        for now, also, we support tagging whereas b53_common does not support
        that yet
      
      All the VLAN and bridge code is entirely identical though so, avoid
      duplicating it. Other things will be migrated in the future like EEE and
      possibly Wake-on-LAN.
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f458995b
    • Florian Fainelli's avatar
      net: dsa: b53: Add JOIN_ALL_VLAN support · 48aea33a
      Florian Fainelli authored
      In order to migrate the bcm_sf2 driver over to the b53 driver for most
      VLAN/FDB/bridge operations, we need to add support for the "join all
      VLANs" register and behavior which allows us to make a given port join
      all VLANs and avoid setting specific VLAN entries when it is leaving the
      bridge.
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      48aea33a
    • Florian Fainelli's avatar
      net: dsa: b53: Define SF2 MIB layout · bde5d132
      Florian Fainelli authored
      The 58xx and 7445 chips use the Starfighter2 code, define its MIB layout
      and introduce a helper function: is58xx() which checks for both of these
      IDs for now.
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bde5d132
    • Florian Fainelli's avatar
      net: dsa: b53: Prepare to support 7445 switch · 130401d9
      Florian Fainelli authored
      Allocate a device entry for the Broadcom BCM7445 integrated switch
      currently backed by bcm_sf2.c. Since this is the latest generation, it
      has 4 ARL entries, 4K VLANs and uses Port 8 for the CPU/IMP port.
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      130401d9
    • Florian Fainelli's avatar
      net: dsa: b53: Initialize ds->ops in b53_switch_alloc · 485ebd61
      Florian Fainelli authored
      In order to allow drivers to override specific dsa_switch_driver
      callbacks, initialize ds->ops to b53_switch_ops earlier, which avoids
      having to expose this structure to glue drivers.
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      485ebd61
    • David S. Miller's avatar
      Merge branch 'mlxsw-fw-mark-offload' · ed35ca99
      David S. Miller authored
      Jiri Pirko says:
      
      ====================
      mlxsw: Introduce support for offload forward mark
      
      Ido says:
      This patchset enables the forwarding of certain control packets by the
      device instead of relying on the CPU to do the forwarding.
      
      The first two patches simplify the current switchdev offload forward
      infrastructure and make it usable for stacked devices. This is done by
      moving the packet and port marking to the bridge driver instead of the
      switch driver.
      
      Patches 3-5 add the mlxsw specific bits to support the forward mark.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ed35ca99
    • Ido Schimmel's avatar
      mlxsw: spectrum: Mirror certain packets to CPU · 1c6c6d22
      Ido Schimmel authored
      Instead of trapping certain packets to the CPU and then relying on it to
      flood them we can instead make the device mirror them.
      
      The following packet types are mirrored:
      
      * DHCP: Broadcast packets that should be flooded by the device, but also
      trapped in case CPU is running the DHCP server.
      
      * IGMP query: Multicast packets that need to be forwarded to other
      bridge ports, but also trapped so that receiving netdev will be marked
      as a router port by the bridge driver.
      
      * ARP request: Broadcast packets that should be forwarded to other
      bridge ports, but also trapped in case requested IP is of the local
      machine.
      
      * ARP response: Unicast packets that should be forwarded by the bridge
      but also trapped in case response is directed at us.
      
      Set the trap action of such packets to mirror and mark them using
      'offload_fwd_mark' to prevent the bridge driver from forwarding them
      itself.
      
      Note that OSPF packets are also marked despite their action being trap.
      The reason for this is that the device traps such packets in the
      pipeline after they were already flooded.
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1c6c6d22
    • Ido Schimmel's avatar
      mlxsw: spectrum: Allow different traps to have different actions · 63a81141
      Ido Schimmel authored
      Up until now we only trapped packets to CPU, but we are going to allow
      some packets to be mirrored (trap & forward) to CPU.
      
      Extend the Rx listener with 'action' member.
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      63a81141
    • Ido Schimmel's avatar
      mlxsw: spectrum: Simplify traps definition · 93393b33
      Ido Schimmel authored
      Instead of copying & pasting the same struct initialization for every
      Rx listener, just use a macro.
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      93393b33
    • Ido Schimmel's avatar
      bridge: switchdev: Add forward mark support for stacked devices · 6bc506b4
      Ido Schimmel authored
      switchdev_port_fwd_mark_set() is used to set the 'offload_fwd_mark' of
      port netdevs so that packets being flooded by the device won't be
      flooded twice.
      
      It works by assigning a unique identifier (the ifindex of the first
      bridge port) to bridge ports sharing the same parent ID. This prevents
      packets from being flooded twice by the same switch, but will flood
      packets through bridge ports belonging to a different switch.
      
      This method is problematic when stacked devices are taken into account,
      such as VLANs. In such cases, a physical port netdev can have upper
      devices being members in two different bridges, thus requiring two
      different 'offload_fwd_mark's to be configured on the port netdev, which
      is impossible.
      
      The main problem is that packet and netdev marking is performed at the
      physical netdev level, whereas flooding occurs between bridge ports,
      which are not necessarily port netdevs.
      
      Instead, packet and netdev marking should really be done in the bridge
      driver with the switch driver only telling it which packets it already
      forwarded. The bridge driver will mark such packets using the mark
      assigned to the ingress bridge port and will prevent the packet from
      being forwarded through any bridge port sharing the same mark (i.e.
      having the same parent ID).
      
      Remove the current switchdev 'offload_fwd_mark' implementation and
      instead implement the proposed method. In addition, make rocker - the
      sole user of the mark - use the proposed method.
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6bc506b4
    • Ido Schimmel's avatar
      switchdev: Support parent ID comparison for stacked devices · 5c326ab4
      Ido Schimmel authored
      switchdev_port_same_parent_id() currently expects port netdevs, but we
      need it to support stacked devices in the next patch, so drop the
      NO_RECURSE flag.
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5c326ab4
    • Ivan Vecera's avatar
      devlink: remove unused priv_size · 2a313cdf
      Ivan Vecera authored
      Remove unused and useless priv_size member from struct devlink_ops.
      
      Cc: Jiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarIvan Vecera <ivecera@redhat.com>
      Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2a313cdf
    • Paolo Abeni's avatar
      net: flush the softnet backlog in process context · 145dd5f9
      Paolo Abeni authored
      Currently in process_backlog(), the process_queue dequeuing is
      performed with local IRQ disabled, to protect against
      flush_backlog(), which runs in hard IRQ context.
      
      This patch moves the flush operation to a work queue and runs the
      callback with bottom half disabled to protect the process_queue
      against dequeuing.
      Since process_queue is now always manipulated in bottom half context,
      the irq disable/enable pair around the dequeue operation are removed.
      
      To keep the flush time as low as possible, the flush
      works are scheduled on all online cpu simultaneously, using the
      high priority work-queue and statically allocated, per cpu,
      work structs.
      
      Overall this change increases the time required to destroy a device
      to improve slightly the packets reinjection performances.
      Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      145dd5f9
    • Nikolay Aleksandrov's avatar
      net: bridge: export also pvid flag in the xstats flags · 72f4af4e
      Nikolay Aleksandrov authored
      When I added support to export the vlan entry flags via xstats I forgot to
      add support for the pvid since it is manually matched, so check if the
      entry matches the vlan_group's pvid and set the flag appropriately.
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      72f4af4e
    • Xin Long's avatar
      veth: sctp: add NETIF_F_SCTP_CRC to device features · c80fafbb
      Xin Long authored
      Commit b17c7069 ("loopback: sctp: add NETIF_F_SCTP_CSUM to device
      features") added NETIF_F_SCTP_CRC to device features for lo device to
      improve the performance of sctp over lo.
      
      This patch is to add NETIF_F_SCTP_CRC to device features for veth to
      improve the performance of sctp over veth.
      
      Before this patch:
        ip netns exec cs_client netperf -H 10.167.12.2 -t SCTP_STREAM -- -m 10K
        Recv   Send    Send
        Socket Socket  Message  Elapsed
        Size   Size    Size     Time     Throughput
        bytes  bytes   bytes    secs.    10^6bits/sec
      
        212992 212992  10240    10.00    1117.16
      
      After this patch:
        ip netns exec cs_client netperf -H 10.167.12.2 -t SCTP_STREAM -- -m 10K
        Recv   Send    Send
        Socket Socket  Message  Elapsed
        Size   Size    Size     Time     Throughput
        bytes  bytes   bytes    secs.    10^6bits/sec
      
        212992 212992  10240    10.20    1415.22
      Tested-by: default avatarLi Shuang <tjlishuang@yeah.net>
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c80fafbb
  3. 25 Aug, 2016 4 commits