The previous fix for a "sparse" warning in ehci_urb_dequeue() was
incorrect.  After rescheduling interrupt transfers it returned the
URB's completion status, not status for the dequeue operation itself.

This patch resolves that issue, cleans up the code in the reschedule
path, and shrinks the object code by a dozen bytes.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

trancevibrator should not pretend success if it returns an error.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

A bug every C programmer makes at some point in time...
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Craig W. Nadler <craig@nadler.us>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The config symbol for mpc834x processors is CONFIG_PPC_MPC834x,
not CONFIG_MPC834x.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

this fixes a race between open and disconnect in the CDC ACM driver.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add native support of the Dell wireless CDMA/EVDO modem.

# modprobe usbserial vendor=0x413c product=0x8129

Following seesion lines describe modem itself
at
OK
ati3
Manufacturer: NOVATEL WIRELESS INCORPORATED
Model: EXPEDITE ET620
Revision: M6500C-BBIRD_TLS_MINI_DELL-Q40306.166 [Aug 25 2006 14:00:00]
ESN: 0x5B39071D
+GCAP: +CIS707-A, CIS-856, +MS, +ES, +DS, +FCLASS

OK
Signed-off-by: Andy Shevchenko <andy@smile.org.ua>
Cc: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

if you fail in open() you must decrement the pm counter again.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>

The option driver
- violates DMA coherency rules
- allocates ~16500 bytes in one chunk
This patch splits out the buffers and uses __get_free_page() to avoid
higher order allocations.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Acked-By: Matthias Urlichs <matthias@urlichs.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

add missing '|'
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Change the FRV timerfd syscalls to be the same as i386 timerfd syscalls.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is no .data.idt section for FRV, so drop it from the linker script.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: fix kernel-doc parameter warning
  sata_mv: remove iounmap in mv_platform_remove and use devm_iomap
  ata: fix sparse warning in libata.h
  libata: implement libata.force module parameter
  sata_mv: use hpriv->base instead of the host->iomap
  sata_mv: Define module alias for platform device
  ata: fix sparse warnings in pata_legacy.c

Noted by various people (Sam, Jeff, Roland..)

Commit 58b7983d intended to remove the
xfs "Makefile-linux-2.6" file, but it was mistakenly still left in the
tree as a empty file, and would cause git to correctly complain about a
tracked file being removed after a "make distclean" (which removes empty
files as garbage).

And the asm-x86/desc_64.h file was supposed to be removed by commit
c81c6ca4, but instead stayed around
containing just a single newline.

Get rid of them both properly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix libata kernel-doc parameter:

Warning(linux-2.6.25-rc2-git3//drivers/ata/libata-scsi.c:845): No description found for parameter 'rq'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

this will fix crash bug when doing rmmod to the driver, this is because the
port_stop function get called later and it could access the device's registers.
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Acked-by: Mark Lord <mlord@pobox.com>
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Avoids lots of these, also is more readable.
include/linux/libata.h:1210:13: warning: potentially expensive pointer subtraction

Change the subtraction to addition on the other side of the comparison.

Thanks to Christer Weinigel for the suggestion.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This patch implements libata.force module parameter which can
selectively override ATA port, link and device configurations
including cable type, SATA PHY SPD limit, transfer mode and NCQ.

For example, you can say "use 1.5Gbps for all fan-out ports attached
to the second port but allow 3.0Gbps for the PMP device itself, oh,
the device attached to the third fan-out port chokes on NCQ and
shouldn't go over UDMA4" by the following.

 libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

this fixes crash bug as the iomap table is not valid for integrated controllers.
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Acked-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

The sata_mv driver can be loaded as a platform device, as is done by
various Orion (ARM) based devices.  The driver needs to define a module
alias for the platform driver so udev will load it automatically.
Tested with Debian on a QNAP TS-209.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Use ld_qdi and ld_winbond to avoid shadowing static int
variables qdi and winbond.  The ld_ prefix refers to
legacy_data.

drivers/ata/pata_legacy.c:777:21: warning: symbol 'qdi' shadows an earlier one
drivers/ata/pata_legacy.c:128:12: originally declared here
drivers/ata/pata_legacy.c:811:21: warning: symbol 'qdi' shadows an earlier one
drivers/ata/pata_legacy.c:128:12: originally declared here
drivers/ata/pata_legacy.c:848:21: warning: symbol 'qdi' shadows an earlier one
drivers/ata/pata_legacy.c:128:12: originally declared here
drivers/ata/pata_legacy.c:882:21: warning: symbol 'qdi' shadows an earlier one
drivers/ata/pata_legacy.c:128:12: originally declared here
drivers/ata/pata_legacy.c:1040:21: warning: symbol 'winbond' shadows an earlier one
drivers/ata/pata_legacy.c:129:12: originally declared here
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

* 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  agp: fix missing casts that produced a warning.
  agp: add support for 662/671 to agp driver
  fix historic ioremap() abuse in AGP
  agp/sis: Suspend support for SiS AGP
  agp/sis: Clear bit 2 from aperture size byte as well

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/sis: add pciid for SiS 662/671 chipset
  drm: add new rv380 pciid
  drm: add support for passing state into the suspend hooks.
  drm/i915: Fix hibernate save/restore of VGA attribute regs
  drm/i915 more registers for S3 (DSPCLK_GATE_D, CACHE_MODE_0, MI_ARB_STATE)
  drm/i915: restore pipeconf regs unconditionally
  drm/i915: save/restore interrupt state
  drm: convert drm from nopage to fault.
  i915: wrap chipset types requiring hw status set ioctl
  drm/radeon: add initial rs690 support to drm.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Dave Airlie <airlied@redhat.com>

fix i915 driver to use state for hibernate save avoidance.
Signed-off-by: Dave Airlie <airlied@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (32 commits)
  x86: fix page_is_ram() thinko
  x86: fix WARN_ON() message: teach page_is_ram() about the special 4Kb bios data page
  x86: i8259A: remove redundant irq_descinitialization
  x86: fix vdso_install breaks user "make install"
  x86: change IO delay back to 0x80
  x86: lds - Use THREAD_SIZE instead of numeric constant
  x86: lds - Use PAGE_SIZE instead of numeric constant
  x86 cleanup: suspend_asm_64.S - use X86_CR4_PGE instead of numeric value
  x86: docs fixes to Documentation/i386/IO-APIC.txt
  x86: fix printout ugliness in cpu info printk
  x86: clean up csum-wrappers_64.c some more
  x86: coding style fixes in arch/x86/lib/csum-wrappers_64.c
  x86: coding style fixes in arch/x86/lib/io_64.c
  x86: exclude vsyscall files from stackprotect
  x86: add pgd_large() on 64-bit, for consistency
  x86: minor cleanup of comments in processor.h
  x86: annotate pci/common.s:pci_scan_bus_with_sysdata with __devinit
  x86: fix section mismatch in head_64.S:initial_code
  x86: fix section mismatch in srat_64.c:reserve_hotadd
  x86: fix section mismatch warning in topology.c:arch_register_cpu
  ...

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] BCM47XX: Use new SSB SPROM data structure
  [MIPS] WGT634U: Register MTD as platform device.
  [MIPS] BCM47xx: Add defconfig file.
  [MIPS] RM: fix EISA=n compilation
  [MIPS] PCI: Coding style fixes for pcibios_enable_resources.
  [MIPS] PCI: Port i386 PCI fixes.
  [MIPS] Qemu: finish platform removal
  [MIPS] Wire up the timerfd_*() o32 system calls
  [MIPS] IP28: Add defconfig file
  [MIPS] SB1: Fix CONFIG_SIBYTE_DMA_PAGEOPS build failure.
  [MIPS] BCM1480: Remove stray function call resulting in infinite recursion
  [MIPS] Fix buggy invocations of kmap_coherent()
  [MIPS] Fix broken rm7000/rm9000 interrupt handling
  [MIPS] Handle I-cache coherency in flush_cache_range()
  [MIPS] IP27: Add missing ~ in DMA code.
  [MIPS] Use find_task_by_vpid in system calls

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6: (29 commits)
  [XTENSA] Allow debugger to modify the WINDOWBASE register.
  [XTENSA] Fix makefile to work with binutils-2.18.
  [XTENSA] Fix register corruption for certain processor configurations
  [XTENSA] Fix cache flush macro for D$/I$ aliasing/non-aliasing
  [XTENSA] Exclude thread-global registers from the xtregs structures.
  [XTENSA] Add support for the sa_restorer function
  [XTENSA] Add support for configurable registers and coprocessors
  [XTENSA] Clean up stat structs.
  [XTENSA] Use preprocessor to generate the linker script for the ELF boot image
  [XTENSA] Add missing RELOCATE_ENTRY for debug vector
  [XTENSA] Add volatile keyword to asm statements accessing counter registers
  [XTENSA] Remove unused code
  [XTENSA] Fix modules for non-exec processor configurations
  [XTENSA] Add missing cast in elf.h ELF_CORE_COPY_REGS()
  [XTENSA] Fix comments regarding the number of frames to save
  [XTENSA] Add missing a2 register restore in register spill routine
  [XTENSA] adjust boot linker script start addresses
  [XTENSA] Remove oldmask from sigcontext and fix register flush
  [XTENSA] Clean up elf-gregset.
  [XTENSA] Fix icache flush for cache aliasing
  ...

This patch fixes two NULL dereferences introduced by commit
06386bbf and spotted by the Coverity
checker.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update the ASB2303 default configuration.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make the kernel jump into gdbstub (if configured) on a BUG with the register
set from the BUG rather than interpolating another illegal instruction and
leaving gdbstub's idea of the process counter in unsupported_syscall() where
the original BUG was detected.

With this patch, gdbstub reports a SIGABRT to the compiler and reports the
program counter at the original BUG, allowing the execution state at the time
of the BUG to be examined with GDB.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Introduce into the MN10300 gdbstub a couple of barrier() calls to replace the
removed volatility of the input/output index variables for the Rx ring buffer.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Call update_process_times() outside of the xtime_lock.  Somewhere somewhere
inside one of the functions called by that, xtime_lock is readlocked, which
ends up in a deadlock situation.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mthca: Free correct MPT on error exit from mthca_fmr_alloc()
  IPoIB/cm: Fix ipoib_cm_dev_stop() cleanup when drain times out

In hibernate, we may end up calling the VGA save regs function twice, so we need to make sure it's idempotent.  That means leaving ARX in index mode after the first save operation.  Fixes hibernate on 965.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Failing to preserve the MI_ARB_STATE register was causing FIFO underruns on
the VGA output on my HP 2510p after resume.
Signed-off-by: Dave Airlie <airlied@redhat.com>

On many chipsets, the checks for DPLL enable or VGA mode will prevent the pipeconf regs from being restored, which could result in a blank display or X failing to come back after resume.  So restore them unconditionally along with actually restoring pipe B's palette correctly.
Signed-off-by: Dave Airlie <airlied@redhat.com>

On resume, if the interrupt state isn't restored correctly, we may end
up with a flood of unexpected or ill-timed interrupts, which could cause
the kernel to disable the interrupt or vblank events to happen at the
wrong time.  So save/restore them properly.
Signed-off-by: Dave Airlie <airlied@linux.ie>