When enabling ARM64_PSEUDO_NMI feature in kdump capture kernel, it will
report a kernel stack overflow exception:

[    0.000000] CPU features: detected: IRQ priority masking
[    0.000000] alternatives: patching kernel code
[    0.000000] Insufficient stack space to handle exception!
[    0.000000] ESR: 0x96000044 -- DABT (current EL)
[    0.000000] FAR: 0x0000000000000040
[    0.000000] Task stack:     [0xffff0000097f0000..0xffff0000097f4000]
[    0.000000] IRQ stack:      [0x0000000000000000..0x0000000000004000]
[    0.000000] Overflow stack: [0xffff80002b7cf290..0xffff80002b7d0290]
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.34-lw+ #3
[    0.000000] pstate: 400003c5 (nZcv DAIF -PAN -UAO)
[    0.000000] pc : el1_sync+0x0/0xb8
[    0.000000] lr : el1_irq+0xb8/0x140
[    0.000000] sp : 0000000000000040
[    0.000000] pmr_save: 00000070
[    0.000000] x29: ffff0000097f3f60 x28: ffff000009806240
[    0.000000] x27: 0000000080000000 x26: 0000000000004000
[    0.000000] x25: 0000000000000000 x24: ffff000009329028
[    0.000000] x23: 0000000040000005 x22: ffff000008095c6c
[    0.000000] x21: ffff0000097f3f70 x20: 0000000000000070
[    0.000000] x19: ffff0000097f3e30 x18: ffffffffffffffff
[    0.000000] x17: 0000000000000000 x16: 0000000000000000
[    0.000000] x15: ffff0000097f9708 x14: ffff000089a382ef
[    0.000000] x13: ffff000009a382fd x12: ffff000009824000
[    0.000000] x11: ffff0000097fb7b0 x10: ffff000008730028
[    0.000000] x9 : ffff000009440018 x8 : 000000000000000d
[    0.000000] x7 : 6b20676e69686374 x6 : 000000000000003b
[    0.000000] x5 : 0000000000000000 x4 : ffff000008093600
[    0.000000] x3 : 0000000400000008 x2 : 7db2e689fc2b8e00
[    0.000000] x1 : 0000000000000000 x0 : ffff0000097f3e30
[    0.000000] Kernel panic - not syncing: kernel stack overflow
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.34-lw+ #3
[    0.000000] Call trace:
[    0.000000]  dump_backtrace+0x0/0x1b8
[    0.000000]  show_stack+0x24/0x30
[    0.000000]  dump_stack+0xa8/0xcc
[    0.000000]  panic+0x134/0x30c
[    0.000000]  __stack_chk_fail+0x0/0x28
[    0.000000]  handle_bad_stack+0xfc/0x108
[    0.000000]  __bad_stack+0x90/0x94
[    0.000000]  el1_sync+0x0/0xb8
[    0.000000]  init_gic_priority_masking+0x4c/0x70
[    0.000000]  smp_prepare_boot_cpu+0x60/0x68
[    0.000000]  start_kernel+0x1e8/0x53c
[    0.000000] ---[ end Kernel panic - not syncing: kernel stack overflow ]---

The reason is init_gic_priority_masking() may unmask PSR.I while the
irq stacks are not inited yet. Some "NMI" could be raised unfortunately
and it will just go into this exception.

In this patch, we just write the PMR in smp_prepare_boot_cpu(), and delay
unmasking PSR.I after irq stacks inited in init_IRQ().

Fixes: e7932188 ("arm64: Switch to PMR masking when starting CPUs")
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
[JT: make init_gic_priority_masking() not modify daif, rebase on other
     priority masking fixes]
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Using IRQ priority masking to enable/disable interrupts is a bit
sensitive as it requires to deal with both ICC_PMR_EL1 and PSR.I.

Introduce some validity checks to both highlight the states in which
functions dealing with IRQ enabling/disabling can (not) be called, and
bark a warning when called in an unexpected state.

Since these checks are done on hotpaths, introduce a build option to
choose whether to do the checking.

Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

When using IRQ priority masking to disable interrupts, in order to deal
with the PSR.I state, local_irq_save() would convert the I bit into a
PMR value (GIC_PRIO_IRQOFF). This resulted in local_irq_restore()
potentially modifying the value of PMR in undesired location due to the
state of PSR.I upon flag saving [1].

In an attempt to solve this issue in a less hackish manner, introduce
a bit (GIC_PRIO_IGNORE_PMR) for the PMR values that can represent
whether PSR.I is being used to disable interrupts, in which case it
takes precedence of the status of interrupt masking via PMR.

GIC_PRIO_PSR_I_SET is chosen such that (<pmr_value> |
GIC_PRIO_PSR_I_SET) does not mask more interrupts than <pmr_value> as
some sections (e.g. arch_cpu_idle(), interrupt acknowledge path)
requires PMR not to mask interrupts that could be signaled to the
CPU when using only PSR.I.

[1] https://www.spinics.net/lists/arm-kernel/msg716956.html

Fixes: 4a503217 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
Cc: <stable@vger.kernel.org> # 5.1.x-
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Pouloze <suzuki.poulose@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

In the presence of any form of instrumentation, nmi_enter() should be
done before calling any traceable code and any instrumentation code.

Currently, nmi_enter() is done in handle_domain_nmi(), which is much
too late as instrumentation code might get called before. Move the
nmi_enter/exit() calls to the arch IRQ vector handler.

On arm64, it is not possible to know if the IRQ vector handler was
called because of an NMI before acknowledging the interrupt. However, It
is possible to know whether normal interrupts could be taken in the
interrupted context (i.e. if taking an NMI in that context could
introduce a potential race condition).

When interrupting a context with IRQs disabled, call nmi_enter() as soon
as possible. In contexts with IRQs enabled, defer this to the interrupt
controller, which is in a better position to know if an interrupt taken
is an NMI.

Fixes: bc3c03cc ("arm64: Enable the support of pseudo-NMIs")
Cc: <stable@vger.kernel.org> # 5.1.x-
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Some of the inline assembly instruction use the condition flags and need
to include "cc" in the clobber list.

Fixes: 4a503217 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
Cc: <stable@vger.kernel.org> # 5.1.x-
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Flags are only read by the instructions doing the irqflags restore
operation. Pass the operand as read only to the asm inline instead of
read-write.

Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@ar.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

For el0_dbg and el0_error, DAIF bits get explicitly cleared before
calling ct_user_exit.

When context tracking is disabled, DAIF gets set (almost) immediately
after. When context tracking is enabled, among the first things done
is disabling IRQs.

What is actually needed is:
- PSR.D = 0 so the system can be debugged (should be already the case)
- PSR.A = 0 so async error can be handled during context tracking

Do not clear PSR.I in those two locations.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

If the cache line size is greater than ARCH_DMA_MINALIGN (128),
the warning shows and it's tainted as TAINT_CPU_OUT_OF_SPEC.

However, it's not good because as discussed in the thread [1], the cpu
cache line size will be problem only on non-coherent devices.

Since the coherent flag is already introduced to struct device,
show the warning only if the device is non-coherent device and
ARCH_DMA_MINALIGN is smaller than the cpu cache size.

[1] https://lore.kernel.org/linux-arm-kernel/20180514145703.celnlobzn3uh5tc2@localhost/Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Tested-by: Zhang Lei <zhang.lei@jp.fujitsu.com>
[catalin.marinas@arm.com: removed 'if' block for WARN_TAINT]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c564 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

In set_pte_at(), we read the old pte value so that it can be passed into
checks for racy hw updates. These checks are only performed for
CONFIG_DEBUG_VM, and the value is not used otherwise.

Since we read the pte value with READ_ONCE(), the compiler cannot elide
the redundant read for !CONFIG_DEBUG_VM kernels.

Let's ameliorate matters by moving the read and the checks into a
helper, __check_racy_pte_update(), which only performs the read when the
value will be used. This also allows us to reformat the conditions for
clarity.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

__do_page_fault() is over complicated with multiple goto statements. This
cleans up the code flow and while there drops local variable vm_fault_t.
Reviewed-by: Mark Rutland <Mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds an is_write_abort() wrapper and documents the detection
of the abort type on cache maintenance operations.

Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
[catalin.marinas@arm.com: only keep the is_write_abort() wrapper]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The config value used in the if was changed in
b433dce0, but the comment on the
corresponding end was not changed.
Signed-off-by: Odin Ugedal <odin@ugedal.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Add PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on arm64.
We don't need any special handling for PTRACE_SYSEMU_SINGLESTEP.

It's quite difficult to generalize handling PTRACE_SYSEMU cross
architectures and avoid calls to tracehook_report_syscall_entry twice.
Different architecture have different mechanism to indicate NO_SYSCALL
and trying to generalise adds more code for no gain.

Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

x86 and um use 31 and 32 for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP
while powerpc uses different value maybe for legacy reasons.

Though handling of PTRACE_SYSEMU can be made architecture independent,
it's hard to make these definations generic. To add to this existing
mess few architectures like arm, c6x and sh use 31 for PTRACE_GETFDPIC
(get the ELF fdpic loadmap address). It's not possible to move the
definations to generic headers.

So we unfortunately have to duplicate the same defination to ARM64 if
we need to support PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.

Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

While the TIF_SYSCALL_EMU is set in ptrace_resume independent of any
architecture, currently only powerpc and x86 unset the TIF_SYSCALL_EMU
flag in ptrace_disable which gets called from ptrace_detach.

Let's move the clearing of TIF_SYSCALL_EMU flag to __ptrace_unlink
which gets executed from ptrace_detach and also keep it along with
or close to clearing of TIF_SYSCALL_TRACE.

Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The task_struct argument is not getting used in __do_page_fault(). Hence
just drop it and use current or cuurent->mm instead where ever required.
This does not change any functionality.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

There is an inconsistency between down_read_trylock() success and failure
paths while dealing with kernel access for non exception table areas where
it calls __do_kernel_fault(). In case of failure it just bails out without
holding mmap_sem but when it succeeds it does so while holding mmap_sem.
Fix this inconsistency by just dropping mmap_sem in success path as well.

__do_kernel_fault() calls die_kernel_fault() which then calls show_pte().
show_pte() in this path might become bit more unreliable without holding
mmap_sem. But there are already instances [1] in do_page_fault() where
die_kernel_fault() gets called without holding mmap_sem. show_pte() can
be made more robust independently but in a later patch.

[1] Conditional block for (is_ttbr0_addr && is_el1_permission_fault)
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

We don't currently set the FAULT_FLAG_INSTRUCTION mm flag for EL0
instruction aborts. This has no functional impact, as we don't override
arch_vma_access_permitted(), and the default implementation always returns
true. However, it would be helpful to provide the flag so that it can be
consumed by tracepoints such as dax_pmd_fault.

This patch sets the FAULT_FLAG_INSTRUCTION flag for EL0 instruction aborts.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

There are no callers for the functions which will pass unaligned physical
addresses. Hence just change these BUG_ON() checks into VM_BUG_ON() which
gets compiled out unless CONFIG_VM_DEBUG is enabled.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Should use aff3 instead of aff2 in comment.
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

cpu_enable_ssbs() is called via stop_machine() as part of the cpu_enable
callback. A spin lock is used to ensure the hook is registered before
the rest of the callback is executed.

On -RT spin_lock() may sleep. However, all the callees in stop_machine()
are expected to not sleep. Therefore a raw_spin_lock() is required here.

Given this is already done under stop_machine() and the work done under
the lock is quite small, the latency should not increase too much.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This change makes CONFIG_ZONE_DMA32 defuly y and allows users
to overwrite it only when CONFIG_EXPERT=y.

For the SoCs that do not need CONFIG_ZONE_DMA32, this is the
first step to manage all available memory by a single
zone(normal zone) to reduce the overhead of multiple zones.

The change also fixes a build error when CONFIG_NUMA=y and
CONFIG_ZONE_DMA32=n.

arch/arm64/mm/init.c:195:17: error: use of undeclared identifier 'ZONE_DMA32'
                max_zone_pfns[ZONE_DMA32] = PFN_DOWN(max_zone_dma_phys());

Change since v1:
1. only expose CONFIG_ZONE_DMA32 when CONFIG_EXPERT=y
2. remove redundant IS_ENABLED(CONFIG_ZONE_DMA32)

Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Even though they have got the same value, PMD_TYPE_SECT and PUD_TYPE_SECT
get used for kernel huge mappings. But before that first the table bit gets
cleared using leaf level PTE_TABLE_BIT. Though functionally they are same,
we should use page table level specific macros to be consistent as per the
MMU specifications. Create page table level specific wrappers for kernel
huge mapping entries and just drop mk_sect_prot() which does not have any
other user.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

cache_line_size is derived from CTR_EL0.CWG field and is called mostly
for I/O device drivers. For some platforms like the HiSilicon Kunpeng920
server SoC, cache line sizes are different between L1/2 cache and L3
cache while L1 cache line size is 64-byte and L3 is 128-byte, but
CTR_EL0.CWG is misreporting using L1 cache line size.

We shall correct the right value which is important for I/O performance.
Let's update the cache line size if it is detected from DT or PPTT
information.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Zhenfa Qiu <qiuzhenfa@hisilicon.com>
Reported-by: Zhenfa Qiu <qiuzhenfa@hisilicon.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Add coherency_max_size variable to record the maximum cache line size
for different cache levels. If it is available, we will synchronize
it as cache line size, otherwise we will use CTR_EL0.CWG reporting
in cache_line_size() for arm64.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

When the kernel is compiled with CONFIG_KERNEL_MODE_NEON, some part of
the kernel may be able to use FPSIMD/SVE. This is for instance the case
for crypto code.

Any use of FPSIMD/SVE in the kernel are clearly marked by using the
function kernel_neon_{begin, end}. Furthermore, this can only be used
when may_use_simd() returns true.

The current implementation of may_use_simd() allows softirq to use
FPSIMD/SVE unless it is currently in use (i.e kernel_neon_busy is true).
When in use, softirqs usually fall back to a software method.

At the moment, as a softirq may use FPSIMD/SVE, softirqs are disabled
when touching the FPSIMD/SVE context. This has the drawback to disable
all softirqs even if they are not using FPSIMD/SVE.

Since a softirq is supposed to check may_use_simd() anyway before
attempting to use FPSIMD/SVE, there is limited reason to keep softirq
disabled when touching the FPSIMD/SVE context. Instead, we can simply
disable preemption and mark the FPSIMD/SVE context as in use by setting
CPU's fpsimd_context_busy flag.

Two new helpers {get, put}_cpu_fpsimd_context are introduced to mark
the area using FPSIMD/SVE context and they are used to replace
local_bh_{disable, enable}. The functions kernel_neon_{begin, end} are
also re-implemented to use the new helpers.

Additionally, double-underscored versions of the helpers are provided to
called when preemption is already disabled. These are only relevant on
paths where irqs are disabled anyway, so they are not needed for
correctness in the current code. Let's use them anyway though: this
marks critical sections clearly and will help to avoid mistakes during
future maintenance.

The change has been benchmarked on Linux 5.1-rc4 with defconfig.

On Juno2:
    * hackbench 100 process 1000 (10 times)
    * .7% quicker

On ThunderX 2:
    * hackbench 1000 process 1000 (20 times)
    * 3.4% quicker
Reviewed-by: Dave Martin <dave.martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The only external user of fpsimd_save() and fpsimd_flush_cpu_state() is
the KVM FPSIMD code.

A following patch will introduce a mechanism to acquire owernship of the
FPSIMD/SVE context for performing context management operations. Rather
than having to export the new helpers to get/put the context, we can just
introduce a new function to combine fpsimd_save() and
fpsimd_flush_cpu_state().

This has also the advantage to remove any external call of fpsimd_save()
and fpsimd_flush_cpu_state(), so they can be turned static.

Lastly, the new function can also be used in the PM notifier.
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The function sve_flush_cpu_state() has been removed in commit 21cdd7fd
("KVM: arm64: Remove eager host SVE state saving").

So remove the associated prototype in asm/fpsimd.h.
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

PTE_VALID signifies that the last level page table entry is valid and it is
MMU recognized while walking the page table. This is not a software defined
PTE bit and should not be listed like one. Just move it to appropriate
header file.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Replace all open encoded contiguous huge page size computations with
available macro encodings CONT_PTE_SIZE and CONT_PMD_SIZE. There are other
instances where these macros are used in the file and this change makes it
consistently use the same mnemonic.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull x86 fixes from Ingo Molnar:
 "Two fixes: a quirk for KVM guests running on certain AMD CPUs, and a
  KASAN related build fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor
  x86/boot: Provide KASAN compatible aliases for string routines

Pull perf fixes from Ingo Molnar:
 "On the kernel side there's a bunch of ring-buffer ordering fixes for a
  reproducible bug, plus a PEBS constraints regression fix.

  Plus tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools headers UAPI: Sync kvm.h headers with the kernel sources
  perf record: Fix s390 missing module symbol and warning for non-root users
  perf machine: Read also the end of the kernel
  perf test vmlinux-kallsyms: Ignore aliases to _etext when searching on kallsyms
  perf session: Add missing swap ops for namespace events
  perf namespace: Protect reading thread's namespace
  tools headers UAPI: Sync drm/drm.h with the kernel
  tools headers UAPI: Sync drm/i915_drm.h with the kernel
  tools headers UAPI: Sync linux/fs.h with the kernel
  tools headers UAPI: Sync linux/sched.h with the kernel
  tools arch x86: Sync asm/cpufeatures.h with the with the kernel
  tools include UAPI: Update copy of files related to new fspick, fsmount, fsconfig, fsopen, move_mount and open_tree syscalls
  perf arm64: Fix mksyscalltbl when system kernel headers are ahead of the kernel
  perf data: Fix 'strncat may truncate' build failure with recent gcc
  perf/ring-buffer: Use regular variables for nesting
  perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data
  perf/ring_buffer: Add ordering to rb->nest increment
  perf/ring_buffer: Fix exposing a temporarily decreased data_head
  perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints

Pull EFI fixes from Ingo Molnar:
 "Two EFI fixes: a quirk for weird systabs, plus add more robust error
  handling in the old 1:1 mapping code"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Allow the number of EFI configuration tables entries to be zero
  efi/x86/Add missing error handling to old_memmap 1:1 mapping code

Pull stacktrace fix from Ingo Molnar:
 "Fix a stack_trace_save_tsk_reliable() regression"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stacktrace: Unbreak stack_trace_save_tsk_reliable()

Pull SPDX fixes from Greg KH:
 "Here are just two small patches, that fix up some found SPDX
  identifier issues.

  The first patch fixes an error in a previous SPDX fixup patch, that
  causes build errors when doing 'make clean' on the tree (the fact that
  almost no one noticed it reflects the fact that kernel developers
  don't like doing that option very often...)

  The second patch fixes up a number of places in the tree where people
  mistyped the string "SPDX-License-Identifier". Given that people can
  not even type their own name all the time without mistakes, this was
  bound to happen, and odds are, we will have to add some type of check
  for this to checkpatch.pl to catch this happening in the future.

  Both of these have passed testing by 0-day"

* tag 'spdx-5.2-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  treewide: fix typos of SPDX-License-Identifier
  crypto: ux500 - fix license comment syntax error

Pull powerpc fixes from Michael Ellerman:
 "A minor fix to our IMC PMU code to print a less confusing error
  message when the driver can't initialise properly.

  A fix for a bug where a user requesting an unsupported branch sampling
  filter can corrupt PMU state, preventing the PMU from counting
  properly.

  And finally a fix for a bug in our support for kexec_file_load(),
  which prevented loading a kernel and initramfs. Most versions of kexec
  don't yet use kexec_file_load().

  Thanks to: Anju T Sudhakar, Dave Young, Madhavan Srinivasan, Ravi
  Bangoria, Thiago Jung Bauermann"

* tag 'powerpc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/kexec: Fix loading of kernel + initramfs with kexec_file_load()
  powerpc/perf: Fix MMCRA corruption by bhrb_filter
  powerpc/powernv: Return for invalid IMC domain

Pull KVM fixes from Paolo Bonzini:
 "Fixes for PPC and s390"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S HV: Restore SPRG3 in kvmhv_p9_guest_entry()
  KVM: PPC: Book3S HV: Fix lockdep warning when entering guest on POWER9
  KVM: PPC: Book3S HV: XIVE: Fix page offset when clearing ESB pages
  KVM: PPC: Book3S HV: XIVE: Take the srcu read lock when accessing memslots
  KVM: PPC: Book3S HV: XIVE: Do not clear IRQ data of passthrough interrupts
  KVM: PPC: Book3S HV: XIVE: Introduce a new mutex for the XIVE device
  KVM: PPC: Book3S HV: XIVE: Fix the enforced limit on the vCPU identifier
  KVM: PPC: Book3S HV: XIVE: Do not test the EQ flag validity when resetting
  KVM: PPC: Book3S HV: XIVE: Clear file mapping when device is released
  KVM: PPC: Book3S HV: Don't take kvm->lock around kvm_for_each_vcpu
  KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list
  KVM: PPC: Book3S HV: Use new mutex to synchronize MMU setup
  KVM: PPC: Book3S HV: Avoid touching arch.mmu_ready in XIVE release functions
  KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_ID
  kvm: fix compile on s390 part 2

Pull i2c fixes from Wolfram Sang:
 "A memleak fix for the core, two driver bugfixes, as well as fixing
  missing file patterns to MAINTAINERS"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: add I2C DT bindings to ARM platforms
  MAINTAINERS: add DT bindings to i2c drivers
  i2c: synquacer: fix synquacer_i2c_doxfer() return value
  i2c: mlxcpld: Fix wrong initialization order in probe
  i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr