o new dscp, ecn, helper, conntrack, pkttype matches
o new DSCP, ECN targets
o extended owner match (support matching of process name)
o fix ip_{conntrack,nat}_{ftp,irc}.c module load bug
o clear nfmark for REJECT-generated packets
o make functions in ipt_ah.c static
o new IPv6 length and eui64 matches

- Replace save_flags/cli/restore_flags with spinlock
- Add locking to make counters SMP safe
- Defined out obsolete counter reset code to allow read locking for
/proc info interface.
- Updated GFP masking.

into nuts.ninka.net:/home/davem/src/BK/net-2.5

. this allows us to kill the shorlived kmalloc/kfree for events in the fast path.
. because of this there is no need for the skb member in the event structs
. use more labeled elements in the transition tables
. simplify llc_sock proc routine
. more kernedoc style comments
. 
. remove unused defines in llc_main.h

. create llc_set_backlog_type and llc_backlog_type
. 

This just adds an if switch to irq_balance which the compiler optimises
away anyway.

This patch that adds a prctl so that processes can set their
floating-point exception mode on PPC and on PPC64.  We need this
because the FP exception mode is controlled by bits in the machine
state register, which can only be accessed by the kernel, and because
the exception mode setting interacts with the lazy FPU save/restore
that the kernel does.

The patch allows userspace to issue printk's, via sys_syslog().

The main use of this is within hpa's klibc - initial userspace needs a
way of logging information and this API allows that information to be
captured into the printk ringbuffer.  It ends up in /var/log/messages.

Messages are truncated at 1024 characters by printk's vsprintf().

Requires CAP_SYS_ADMIN.

JFS needs this.

Please apply the four of four tested patches that update
2.5.31 with these I2C changes:
 o Support for SMBus 2.0 PEC Packet Error Checking
 o New adapter-i2c-frodo for SA 1110 board
 o New adapter-i2c-rpx for embeded MPC8XX
 o Replace depreciated cli()&sti() with spin_{un}lock_irq()
 o Updated documentation

Please apply the three of four tested patches that update
2.5.31 with these I2C changes:
 o Support for SMBus 2.0 PEC Packet Error Checking
 o New adapter-i2c-frodo for SA 1110 board
 o New adapter-i2c-rpx for embeded MPC8XX
 o Replace depreciated cli()&sti() with spin_{un}lock_irq()
 o Updated documentation

Please apply the two of four tested patches that update
2.5.31 with these I2C changes:
 o Support for SMBus 2.0 PEC Packet Error Checking
 o New adapter-i2c-frodo for SA 1110 board
 o New adapter-i2c-rpx for embeded MPC8XX
 o Replace depreciated cli()&sti() with spin_{un}lock_irq()
 o Updated documentation

into home.transmeta.com:/home/torvalds/v2.5/linux

Convert ext2 initialisers to c99 format.  From Art Haas.

Make sure we delete devices from the driver list the iteration after we 
detach them (so we can get a valid next pointer)

into osdl.org:/home/mochel/src/kernel/devel/linux-2.5-driverfs-test

More C99 initializers fixes in ncpfs. By Art Haas <ahaas@neosoft.com>

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

into kroah.com:/home/greg/linux/BK/gregkh-2.5

- I changed the sector_t thing in max_block to use davem's approach.
  I agree with Anton, but making it explicit doesn't hurt.

- Remove a dead comment in copy_strings.

Old stuff:

- Remove the IO error warning in end_buffer_io_sync().  Failed READA
  attempts trigger it.

- Emit a warning when an ext2 is mounting an ext3 filesystem.

  We have had quite a few problem reports related to this, mainly
  arising from initrd problems.  And mount(8) tends to report the
  fstype from /etc/fstab rather than reporting what has really
  happened.

Fixes some bogosity which I added to max_block():

- `size' doesn't need to be sector_t

- `retval' should not be initialised to "~0UL" because that is
  0x00000000ffffffff with 64-bit sector_t.

- Allocate task_structs with GFP_KERNEL, as discussed.

- Convert the EXPORT_SYMBOL for generic_file_direct_IO() to
  EXPORT_SYMBOL_GPL.  That was only exported as a practicality for the
  raw driver.

- Make the loop thread run balance_dirty_pages() after dirtying the
  backing file.  So it will perform writeback of the backing file when
  dirty memory levels are high.  Export balance_dirty_pages to GPL
  modules for this.

  This makes loop work a lot better - I suspect it broke when callers
  of balance_dirty_pages() started writing back only their own queue.

  There are many page allocation failures under heavy loop writeout.
  Coming from blk_queue_bounce()'s allocation from the page_pool
  mempool.  So...

- Disable page allocation warnings around the initial atomic
  allocation attempt in mempool_alloc() - the one where __GFP_WAIT and
  __GFP_IO were turned off.  That one can easily fail.

- Add some commentary in block_write_full_page()

get_page_state() is showing up on profiles on some big machines.  It is
a quite expensive function and it is being called too often.

The patch replaces the hardwired RATELIMIT_PAGES with a calculated
amount based on the amount of memory in the machine and the number of
CPUs.

Replace the buffer lru spinlock protection with local_irq_disable and a
cross-CPU call to invalidate them.

include/linux/prefetch.h does a strange thing: if the arch doesn't have
the prefectch functions, this header defines no-op version of them and
then defines ARCH_HAS_PREFETCH.  So there's no way for mainline code to
know if the architecture *really* has prefetch instructions.

This information loss is unfortunate.  Examples:

	for (i = 0; i < N; i++)
		prefetch(foo[i]);

   Problem is, if `prefetch' is a no-op, the compiler will still
   generate an empty busy-wait loop.  Which it must do.  We need to
   know the truth about ARCH_HAS_PREFETCH to correctly elide that loop.

  - fixed deadlock

This implements CLONE_VM_RELEASE, which lets the child release the 'user
VM' at mm_release() time.

the attached patch implements the per-CPU thread-structure cache to do
detached exit, if the parent does not want to be notified of child exit
via a signal.

This adds two new clone() flags:

    CLONE_SETTLS => if present then the third clone() syscall parameter
                    is the new TLS.

    CLONE_SETTID => if present then the child TID is written to the
                    address specified by the fourth clone() parameter.

the new parameters are handled in a safe way, clone() returns -EFAULT or
-EINVAL if there's some problem with them.

Here is a trivial bug fix for blkdev_reread_part() in 2.5.31.
Without this fix,  "fdisk" hangs with following messages:

	Calling ioctl() to re-read partition table.

	WARNING: Re-reading the partition table failed with error 16:
			Device or resource busy.
	The kernel still uses the old table.
	The new table will be used at the next reboot.

into osdl.org:/home/mochel/src/kernel/devel/linux-2.5-driverfs-test

Change all iterators of devices to:
- use list_for_each
- check return of get_device_locked
- don't break until we hold the lock if we get an error

When a device's reference count hits 0, remove it from all lists, including
bus and driver lists.

Between the iterator algorithm and the guaranteed removal from the lists,
there should never be a device in a list with a reference count of 0. 
So, whenever we're iterating over the lists, we'll always have a valid 
device. We don't decrement the refcount until the next iteration of the
loop, so we're also guaranteed to get the correct next item in the list.

- teaches the shared "hcd" code to set urb->*_dma whenever the device
  driver didn't, by creating singleshot mappings.

-  teaches the hardware-specific code to
   use urb->*_dma instead of creating mappings.
   (And tells ohci-sa1111 to init its buffer pools.)
   EHCI and UHCI also eliminated duplicated state;
   all the HCDs are now a smidgeon smaller.

Sanity checked by enumerating, including through
a hub, and using a USB Ethernet adapter, with each
of the three host controllers.

Worth noting:  this removes pci_dma_sync_single()
calls from UHCI.  On x86 (and some others) that's
a NOP, but for UHCI on other platforms (rare except
maybe on IA64, as I understand) this anticipates
the upcoming patch to remove interrupt automagic.
(I'll likely submit that after a Linus release that
catches up to your USB tree. :)

When adding to the global device list, we were adding devices just after their parent, while we wanted to
add them just before. That way when we iterate over the list on suspend and shutdown, we'll hit all
children before the parents.

Make sure dev->driver_list and dev->bus_list are initialized when the device is registered

Remove device from global and parent's list if registration failed.

This patch to 2.5.31 pushes "Networking options" and
"Network device support" together for all architectures
that have them.

They shouldn't be split apart by Telephony, I2O,
Fusion, etc.

This old __per_cpu_data define wasn't enough if an arch wants to
use the gcc __thread prefix (thread local storage), which needs to
go *before* the type in the definition.  So we have to go for a
DECLARE macro, and while we're there, separate DECLARE and DEFINE,
as definitions of per-cpu data cannot live in modules.  This also
means that accidental direct references to per-cpu variables will
be caught at compile time.

This makes introduces get_cpu_var()/put_cpu_var() which gets a
per-cpu variable and disables preemption, and renames the (unsafe
under preemption) "this_cpu()" macro to __get_cpu_var().  It also
deletes the redundant definitions in linux/smp.h.