nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb
should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send()
won't free the skb when it failed for the test_bit(). Free the skb when
test_bit() failed.

Fixes: b5b3e23e ("NFC: nfcmrvl: add i2c driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Suggested-by: Pavel Machek <pavel@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

'ret' is defined twice in macsec_changelink(), when it is set in macsec_is_offloaded
case, it will be invalid before return.

Fixes: 3cf3227a ("net: macsec: hardware offloading infrastructure")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20221118011249.48112-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, we get icmp6hdr via function icmp6_hdr(), which needs the skb
transport header to be set first. But there is no rule to ask driver set
transport header before netif_receive_skb() and bond_handle_frame(). So
we will not able to get correct icmp6hdr on some drivers.

Fix this by using skb_header_pointer to get the IPv6 and ICMPV6 headers.
Reported-by: Liang Li <liali@redhat.com>
Fixes: 4e24be01 ("bonding: add new parameter ns_targets")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20221118034353.1736727-1-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Simon Horman says:

====================
nfp: fixes for v6.1

 - Ensure that information displayed by "devlink port show"
           reflects the number of lanes available to be split.
 - Avoid NULL dereference in ethtool test code.
====================

Link: https://lore.kernel.org/r/20221117153744.688595-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Setting of the port flag `NFP_PORT_CHANGED`, introduced
to ensure the correct reading of EEPROM data, causes a
fatal kernel NULL pointer dereference in cases where
the target netdev type cannot be determined.

Add validation of port struct pointer before attempting
to set the `NFP_PORT_CHANGED` flag. Return that operation
is not supported if the netdev type cannot be determined.

Fixes: 4ae97cae ("nfp: ethtool: fix the display error of `ethtool -m DEVNAME`")
Signed-off-by: Jaco Coetzee <jaco.coetzee@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The error is reflected in that it shows wrong splittable status of
port when executing "devlink port show".
The reason which leads the error is that the assigned operation of
splittable is just a simple negation operation of split and it does
not consider port lanes quantity. A splittable port should have
several lanes that can be split(lanes quantity > 1).
If without the judgement, it will show wrong message for some
firmware, such as 2x25G, 2x10G.

Fixes: a0f49b54 ("devlink: Add a new devlink port split ability attribute and pass to netlink")
Signed-off-by: Diana Wang <na.wang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().

In pch_gbe_probe(), pci_get_domain_bus_and_slot() is called,
so in error path in probe() and remove() function, pci_dev_put()
should be called to avoid refcount leak. Compile tested only.

Fixes: 1a0bdadb ("net/pch_gbe: supports eg20t ptp clock")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221117135148.301014-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().

So before returning from rvu_dbg_rvu_pf_cgx_map_display() or
cgx_print_dmac_flt(), pci_dev_put() is called to avoid refcount
leak.

Fixes: dbc52deb ("octeontx2-af: Debugfs support for DMAC filters")
Fixes: e2fb3730 ("octeontx2-af: Display CGX, NIX and PF map in debugfs.")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221117124658.162409-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The ql3xxx_send() returns NETDEV_TX_OK without freeing skb in error
handling case, add dev_kfree_skb_any() to fix it.

Fixes: bd36b0ac ("qla3xxx: Add support for Qlogic 4032 chip.")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1668675039-21138-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It will cause invalid pointer dereference to priv->cm3_base behind,
if PTR_ERR(priv->cm3_base) in mvpp2_get_sram().

Fixes: e54ad1e0 ("net: mvpp2: add CM3 SRAM memory map")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Link: https://lore.kernel.org/r/20221117084032.101144-1-tanghui20@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If mlx4_bitmap_init fails, mlx4_bitmap_alloc_range will dereference
the NULL pointer (bitmap->table).

Make sure, that mlx4_bitmap_alloc_range called in no error case.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: d57febe1 ("net/mlx4: Add A0 hybrid steering")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Peter Kosyh <pkosyh@yandex.ru>
Link: https://lore.kernel.org/r/20221117152806.278072-1-pkosyh@yandex.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If mtk_start_dma() fails, invoke phylink_disconnect_phy() to perform
cleanup. phylink_disconnect_phy() contains the put_device action. If
phylink_disconnect_phy is not performed, the Kref of netdev will leak.

Fixes: b8fc9f30 ("net: ethernet: mediatek: Add basic PHYLINK support")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221117111356.161547-1-liujian56@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In pch_gbe_xmit_frame(), NETDEV_TX_OK will be returned whether
pch_gbe_tx_queue() sends data successfully or not, so pch_gbe_tx_queue()
needs to free skb before returning. But pch_gbe_tx_queue() returns without
freeing skb in case of dma_map_single() fails. Add dev_kfree_skb_any()
to fix it.

Fixes: 77555ee7 ("net: Add Gigabit Ethernet driver of Topcliff PCH")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously we leverage NCI_UNREG and the lock inside nci_close_device to
prevent the race condition between opening a device and closing a
device. However, it still has problem because a failed opening command
will erase the NCI_UNREG flag and allow another opening command to
bypass the status checking.

This fix corrects that by making sure the NCI_UNREG is held.

Reported-by: syzbot+43475bf3cfbd6e41f5b7@syzkaller.appspotmail.com
Fixes: 48b71a9e ("NFC: add NCI_UNREG flag to eliminate the race")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

You'd think people know that the internal 100BASE-TX PHY on the SJA1110
responds only to clause 22 MDIO transactions, but they don't :)

When a clause 45 transaction is attempted, sja1105_base_tx_mdio_read()
and sja1105_base_tx_mdio_write() don't expect "reg" to contain bit 30
set (MII_ADDR_C45) and pack this value into the SPI transaction buffer.

But the field in the SPI buffer has a width smaller than 30 bits, so we
see this confusing message from the packing() API rather than a proper
rejection of C45 transactions:

Call trace:
 dump_stack+0x1c/0x38
 sja1105_pack+0xbc/0xc0 [sja1105]
 sja1105_xfer+0x114/0x2b0 [sja1105]
 sja1105_xfer_u32+0x44/0xf4 [sja1105]
 sja1105_base_tx_mdio_read+0x44/0x7c [sja1105]
 mdiobus_read+0x44/0x80
 get_phy_c45_ids+0x70/0x234
 get_phy_device+0x68/0x15c
 fwnode_mdiobus_register_phy+0x74/0x240
 of_mdiobus_register+0x13c/0x380
 sja1105_mdiobus_register+0x368/0x490 [sja1105]
 sja1105_setup+0x94/0x119c [sja1105]
Cannot store 401d2405 inside bits 24-4 (would truncate)

Fixes: 5a8f0974 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

After rxrpc_unbundle_conn() has removed a connection from a bundle, it
checks to see if there are any conns with available channels and, if not,
removes and attempts to destroy the bundle.

Whilst it does check after grabbing client_bundles_lock that there are no
connections attached, this races with rxrpc_look_up_bundle() retrieving the
bundle, but not attaching a connection for the connection to be attached
later.

There is therefore a window in which the bundle can get destroyed before we
manage to attach a new connection to it.

Fix this by adding an "active" counter to struct rxrpc_bundle:

 (1) rxrpc_connect_call() obtains an active count by prepping/looking up a
     bundle and ditches it before returning.

 (2) If, during rxrpc_connect_call(), a connection is added to the bundle,
     this obtains an active count, which is held until the connection is
     discarded.

 (3) rxrpc_deactivate_bundle() is created to drop an active count on a
     bundle and destroy it when the active count reaches 0.  The active
     count is checked inside client_bundles_lock() to prevent a race with
     rxrpc_look_up_bundle().

 (4) rxrpc_unbundle_conn() then calls rxrpc_deactivate_bundle().

Fixes: 245500d8 ("rxrpc: Rewrite the client connection manager")
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-15975
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: zdi-disclosures@trendmicro.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit afef88e6 ("selftests/bpf: Store BPF object files with
.bpf.o extension"), we should use xdp_dummy.bpf.o instade of xdp_dummy.o.

In addition, use the BPF_FILE variable to save the BPF object file name,
which can be better identified and modified.

Fixes: afef88e6 ("selftests/bpf: Store BPF object files with .bpf.o extension")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Cc: Daniel Müller <deso@posteo.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recently syzkaller discovered the issue of disappearing lower
device (NETDEV_UNREGISTER) while the virtual device (like
macvlan) is still having it as a lower device. So it's just
a matter of time similar discovery will be made for IPvlan
device setup. So fixing it preemptively. Also while at it,
add a refcount tracker.

Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 0ff4eb3d ("neighbour: make proxy_queue.qlen limit
per-device") introduced the length counter qlen in struct neigh_parms.
There are separate neigh_parms instances for IPv4/ARP and IPv6/ND, and
while the family specific qlen is incremented in pneigh_enqueue(), the
mentioned commit decrements always the IPv4/ARP specific qlen,
regardless of the currently processed family, in pneigh_queue_purge()
and neigh_proxy_process().

As a result, with IPv6/ND, the family specific qlen is only incremented
(and never decremented) until it exceeds PROXY_QLEN, and then, according
to the check in pneigh_enqueue(), neighbor solicitations are not
answered anymore. As an example, this is noted when using the
subnet-router anycast address to access a Linux router. After a certain
amount of time (in the observed case, qlen exceeded PROXY_QLEN after two
days), the Linux router stops answering neighbor solicitations for its
subnet-router anycast address and effectively becomes unreachable.

Another result with IPv6/ND is that the IPv4/ARP specific qlen is
decremented more often than incremented. This leads to negative qlen
values, as a signed integer has been used for the length counter qlen,
and potentially to an integer overflow.

Fix this by introducing the helper function neigh_parms_qlen_dec(),
which decrements the family specific qlen. Thereby, make use of the
existing helper function neigh_get_dev_parms_rcu(), whose definition
therefore needs to be placed earlier in neighbour.c. Take the family
member from struct neigh_table to determine the currently processed
family and appropriately call neigh_parms_qlen_dec() from
pneigh_queue_purge() and neigh_proxy_process().

Additionally, use an unsigned integer for the length counter qlen.

Fixes: 0ff4eb3d ("neighbour: make proxy_queue.qlen limit per-device")
Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the warning reported by kbuild:

cocci warnings: (new ones prefixed by >>)
>> drivers/net/ethernet/cavium/liquidio/lio_main.c:1797:54-56: WARNING !A || A && B is equivalent to !A || B
   drivers/net/ethernet/cavium/liquidio/lio_main.c:1827:54-56: WARNING !A || A && B is equivalent to !A || B

Fixes: 8979f428 ("net: liquidio: release resources when liquidio driver open failed")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: selftests: Fix timeouts and test isolation

Patches 1 and 3 adjust test timeouts to reduce false negatives on slow
machines.

Patch 2 improves test isolation by running the mptcp_sockopt test in its
own net namespace.
====================

Link: https://lore.kernel.org/r/20221115221046.20370-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The estimated time was supposing the rate was expressed in mibit
(bit * 1024^2) but it is in mbit (bit * 1000^2).

This makes the threshold higher but in a more realistic way to avoid
false positives reported by CI instances.

Before this patch, the thresholds were at 7561/4005ms and now they are
at 7906/4178ms.

While at it, also fix a typo in the linked comment, spotted by Mat.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/310
Fixes: 1a418cb8 ("mptcp: simult flow self-tests")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Not running it from a new netns causes issues if some MPTCP settings are
modified, e.g. if MPTCP is disabled from the sysctl knob, if multiple
addresses are available and added to the MPTCP path-manager, etc.

In these cases, the created connection will not behave as expected, e.g.
unable to create an MPTCP socket, more than one subflow is seen, etc.

A new "sandbox" net namespace is now created and used to run
mptcp_sockopt from this controlled environment.

Fixes: ce997912 ("selftests: mptcp: add mptcp getsockopt test cases")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

On slow or busy VM, some test-cases still fail because the
data transfer completes before the endpoint manipulation
actually took effect.

Address the issue by artificially increasing the runtime for
the relevant test-cases.

Fixes: ef360019 ("selftests: mptcp: signal addresses testcases")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/309Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf.

  Current release - regressions:

   - tls: fix memory leak in tls_enc_skb() and tls_sw_fallback_init()

  Previous releases - regressions:

   - bridge: fix memory leaks when changing VLAN protocol

   - dsa: make dsa_master_ioctl() see through port_hwtstamp_get() shims

   - dsa: don't leak tagger-owned storage on switch driver unbind

   - eth: mlxsw: avoid warnings when not offloaded FDB entry with IPv6
     is removed

   - eth: stmmac: ensure tx function is not running in
     stmmac_xdp_release()

   - eth: hns3: fix return value check bug of rx copybreak

  Previous releases - always broken:

   - kcm: close race conditions on sk_receive_queue

   - bpf: fix alignment problem in bpf_prog_test_run_skb()

   - bpf: fix writing offset in case of fault in
     strncpy_from_kernel_nofault

   - eth: macvlan: use built-in RCU list checking

   - eth: marvell: add sleep time after enabling the loopback bit

   - eth: octeon_ep: fix potential memory leak in octep_device_setup()

  Misc:

   - tcp: configurable source port perturb table size

   - bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)"

* tag 'net-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
  net: use struct_group to copy ip/ipv6 header addresses
  net: usb: smsc95xx: fix external PHY reset
  net: usb: qmi_wwan: add Telit 0x103a composition
  netdevsim: Fix memory leak of nsim_dev->fa_cookie
  tcp: configurable source port perturb table size
  l2tp: Serialize access to sk_user_data with sk_callback_lock
  net: thunderbolt: Fix error handling in tbnet_init()
  net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start()
  net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init()
  net: dsa: don't leak tagger-owned storage on switch driver unbind
  net/x25: Fix skb leak in x25_lapb_receive_frame()
  net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ag71xx_open()
  bridge: switchdev: Fix memory leaks when changing VLAN protocol
  net: hns3: fix setting incorrect phy link ksettings for firmware in resetting process
  net: hns3: fix return value check bug of rx copybreak
  net: hns3: fix incorrect hw rss hash type of rx packet
  net: phy: marvell: add sleep time after enabling the loopback bit
  net: ena: Fix error handling in ena_init()
  kcm: close race conditions on sk_receive_queue
  net: ionic: Fix error handling in ionic_init_module()
  ...

kernel test robot reported warnings when build bonding module with
make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/net/bonding/:

                 from ../drivers/net/bonding/bond_main.c:35:
In function ‘fortify_memcpy_chk’,
    inlined from ‘iph_to_flow_copy_v4addrs’ at ../include/net/ip.h:566:2,
    inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3984:3:
../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f
ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
  413 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘fortify_memcpy_chk’,
    inlined from ‘iph_to_flow_copy_v6addrs’ at ../include/net/ipv6.h:900:2,
    inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3994:3:
../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f
ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
  413 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This is because we try to copy the whole ip/ip6 address to the flow_key,
while we only point the to ip/ip6 saddr. Note that since these are UAPI
headers, __struct_group() is used to avoid the compiler warnings.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c3f83241 ("net: Add full IPv6 addresses to flow_keys")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20221115142400.1204786-1-liuhangbin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

An external PHY needs settling time after power up or reset.
In the bind() function an mdio bus is registered. If at this point
the external PHY is still initialising, no valid PHY ID will be
read and on phy_find_first() the bind() function will fail.

If an external PHY is present, wait the maximum time specified
in 802.3 45.2.7.1.1.

Fixes: 05b35e7e ("smsc95xx: add phylib support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221115114434.9991-2-alexandru.tachici@analog.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add the following Telit LE910C4-WWX composition:

0x103a: rmnet
Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20221115105859.14324-1-enrico.sau@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

kmemleak reports this issue:

unreferenced object 0xffff8881bac872d0 (size 8):
  comm "sh", pid 58603, jiffies 4481524462 (age 68.065s)
  hex dump (first 8 bytes):
    04 00 00 00 de ad be ef                          ........
  backtrace:
    [<00000000c80b8577>] __kmalloc+0x49/0x150
    [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim]
    [<0000000093d78e77>] full_proxy_write+0xf3/0x180
    [<000000005a662c16>] vfs_write+0x1c5/0xaf0
    [<000000007aabf84a>] ksys_write+0xed/0x1c0
    [<000000005f1d2e47>] do_syscall_64+0x3b/0x90
    [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

The issue occurs in the following scenarios:

nsim_dev_trap_fa_cookie_write()
  kmalloc() fa_cookie
  nsim_dev->fa_cookie = fa_cookie
..
nsim_drv_remove()

The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To
fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove().

Fixes: d3cbb907 ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Link: https://lore.kernel.org/r/1668504625-14698-1-git-send-email-wangyufen@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull xen fixes from Juergen Gross:
 "Two trivial cleanups, and three simple fixes"

* tag 'for-linus-6.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/platform-pci: use define instead of literal number
  xen/platform-pci: add missing free_irq() in error path
  xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too
  xen/pcpu: fix possible memory leak in register_pcpu()
  x86/xen: Use kstrtobool() instead of strtobool()

Pull pin control fixes from Linus Walleij:
 "Aere is a hopefully final round of pin control fixes. Nothing special,
  driver fixes and we caught a potential NULL pointer exception.

   - Fix a potential NULL dereference in the core!

   - Fix all pin mux routes in the Rockchop PX30 driver

   - Fix the UFS pins in the Qualcomm SC8280XP driver

   - Fix bias disabling in the Mediatek driver

   - Fix debounce time settings in the Mediatek driver"

* tag 'pinctrl-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mediatek: Export debounce time tables
  pinctrl: mediatek: Fix EINT pins input debounce time configuration
  pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map
  pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPE
  pinctrl: qcom: sc8280xp: Rectify UFS reset pins
  pinctrl: rockchip: list all pins in a possible mux route for PX30

Merge tag 'platform-drivers-x86-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - Surface Pro 9 and Surface Laptop 5 kbd, battery, etc support (this
   is just a few hw-id additions)

 - A couple of other hw-id / DMI-quirk additions

 - A few small bug fixes + 1 build fix

* tag 'platform-drivers-x86-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: ideapad-laptop: Add module parameters to match DMI quirk tables
  platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops
  platform/x86: hp-wmi: Ignore Smart Experience App event
  platform/surface: aggregator_registry: Add support for Surface Laptop 5
  platform/surface: aggregator_registry: Add support for Surface Pro 9
  platform/surface: aggregator: Do not check for repeated unsequenced packets
  platform/x86: acer-wmi: Enable SW_TABLET_MODE on Switch V 10 (SW5-017)
  platform/x86: asus-wmi: add missing pci_dev_put() in asus_wmi_set_xusb2pr()
  platform/x86/intel: pmc: Don't unconditionally attach Intel PMC when virtualized
  platform/x86: thinkpad_acpi: Enable s2idle quirk for 21A1 machine type
  platform/x86/amd: pmc: Add new ACPI ID AMDI0009
  platform/x86/amd: pmc: Remove more CONFIG_DEBUG_FS checks

On embedded systems with little memory and no relevant
security concerns, it is beneficial to reduce the size
of the table.

Reducing the size from 2^16 to 2^8 saves 255 KiB
of kernel RAM.

Makes the table size configurable as an expert option.

The size was previously increased from 2^8 to 2^16
in commit 4c2c8f03 ("tcp: increase source port perturb table to
2^16").
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sk->sk_user_data has multiple users, which are not compatible with each
other. Writers must synchronize by grabbing the sk->sk_callback_lock.

l2tp currently fails to grab the lock when modifying the underlying tunnel
socket fields. Fix it by adding appropriate locking.

We err on the side of safety and grab the sk_callback_lock also inside the
sk_destruct callback overridden by l2tp, even though there should be no
refs allowing access to the sock at the time when sk_destruct gets called.

v4:
- serialize write to sk_user_data in l2tp sk_destruct

v3:
- switch from sock lock to sk_callback_lock
- document write-protection for sk_user_data

v2:
- update Fixes to point to origin of the bug
- use real names in Reported/Tested-by tags

Cc: Tom Parkin <tparkin@katalix.com>
Fixes: 3557baab ("[L2TP]: PPP over L2TP driver core")
Reported-by: Haowei Yan <g1042620637@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A problem about insmod thunderbolt-net failed is triggered with following
log given while lsmod does not show thunderbolt_net:

 insmod: ERROR: could not insert module thunderbolt-net.ko: File exists

The reason is that tbnet_init() returns tb_register_service_driver()
directly without checking its return value, if tb_register_service_driver()
failed, it returns without removing property directory, resulting the
property directory can never be created later.

 tbnet_init()
   tb_register_property_dir() # register property directory
   tb_register_service_driver()
     driver_register()
       bus_add_driver()
         priv = kzalloc(...) # OOM happened
   # return without remove property directory

Fix by remove property directory when tb_register_service_driver() returns
error.

Fixes: e69b6c02 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shang XiaoJing says:

====================
net: microchip: Fix potential null-ptr-deref due to create_singlethread_workqueue()

There are some functions call create_singlethread_workqueue() without
checking ret value, and the NULL workqueue_struct pointer may causes
null-ptr-deref. Will be fixed by this patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

sparx_stats_init() calls create_singlethread_workqueue() and not
checked the ret value, which may return NULL. And a null-ptr-deref may
happen:

sparx_stats_init()
    create_singlethread_workqueue() # failed, sparx5->stats_queue is NULL
    queue_delayed_work()
        queue_delayed_work_on()
            __queue_delayed_work()  # warning here, but continue
                __queue_work()      # access wq->flags, null-ptr-deref

Check the ret value and return -ENOMEM if it is NULL. So as
sparx5_start().

Fixes: af4b1102 ("net: sparx5: add ethtool configuration and statistics support")
Fixes: b37a1bae ("net: sparx5: add mactable support")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

lan966x_stats_init() calls create_singlethread_workqueue() and not
checked the ret value, which may return NULL. And a null-ptr-deref may
happen:

lan966x_stats_init()
    create_singlethread_workqueue() # failed, lan966x->stats_queue is NULL
    queue_delayed_work()
        queue_delayed_work_on()
            __queue_delayed_work()  # warning here, but continue
                __queue_work()      # access wq->flags, null-ptr-deref

Check the ret value and return -ENOMEM if it is NULL.

Fixes: 12c2d0a5 ("net: lan966x: add ethtool configuration and statistics")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add module parameters to allow setting the hw_rfkill_switch and
set_fn_lock_led feature flags for testing these on laptops which are not
on the DMI-id based allow lists for these 2 flags.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221115193400.376159-1-hdegoede@redhat.com

Commit 3ae86d2d ("platform/x86: ideapad-laptop: Fix Legion 5 Fn lock
LED") uses the WMI event-id for the fn-lock event on some Legion 5 laptops
to manually toggle the fn-lock LED because the EC does not do it itself.
However, the same WMI ID is also sent on some Yoga laptops. Here, setting
the fn-lock state is not valid behavior, and causes the EC to spam
interrupts until the laptop is rebooted.

Add a set_fn_lock_led_list[] DMI-id list and only enable the workaround to
manually set the LED on models on this list.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=212671
Cc: Meng Dong <whenov@gmail.com>
Signed-off-by: Arnav Rawat <arnavr3@illinois.edu>
Link: https://lore.kernel.org/r/12093851.O9o76ZdvQC@fedora
[hdegoede@redhat.com: Check DMI-id list only once and store the result]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>