- 16 Dec, 2015 4 commits
-
-
Jani Nikula authored
The decision about which source will be used for VBT is done in intel_parse_bios(), not in the VBT validation function. Make the VBT validation function strictly about validation, and move the debug logging to where it logically belongs. Also split the logging about where the valid VBT was found and what the signature is. This will make even more sense in the future when the validation for ACPI OpRegion based VBT takes place at OpRegion setup time. v2: Split logging about VBT signature and BDB version. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450178092-27148-1-git-send-email-jani.nikula@intel.com
-
Jani Nikula authored
This will simplify further work. Reviewed-by:
-
Jani Nikula authored
Check the quirk in intel_opregion_setup(), and don't initialize opregion->vbt at all if the quirk says it's not present, hiding the quirk from the rest of the driver. Reviewed-by:
-
Deepak M authored
Mailbox 5 is BIOS to Driver Notification mailbox is intended to support BIOS to Driver event notification or data storage for BIOS to Driver data synchronization purpose. Mailbox 5 is the extension of mailbox 3. v4 by Jani: - don't add asle_ext to dev_priv as it's unused - use u8 for bddc and rsvd fields in asle ext struct - add BUILD_BUG_ON the asle ext struct size - debug logging for asle ext present Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Deepak M <m.deepak@intel.com> Reviewed-by:
-
- 14 Dec, 2015 2 commits
-
-
Ville Syrjälä authored
The cursor code tries to treat base==0 to mean disabled. That fails when the cursor bo gets bound at ggtt offset 0, and the user is left looking at an invisible cursor. We lose the disabled->disabled optimization, but that seems like something better handled at a slightly higher level. Cc: drm-intel-fixes@lists.freedesktop.org Cc: Takashi Iwai <tiwai@suse.de> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Ville Syrjälä authored
The vma may have been rebound between the last time the cursor was enabled and now, so skipping the cursor gtt offset deduction is not safe unless we would also reset cursor_bo to NULL when disabling the cursor. Just thow cursor_bo to the bin instead since it's lost all other uses thanks to universal plane support. Chris pointed out that cursor updates are currently too slow via universal planes that micro optimizations like these wouldn't even help. v2: Add a note about futility of micro optimizations (Chris) Cc: drm-intel-fixes@lists.freedesktop.org References: http://lists.freedesktop.org/archives/intel-gfx/2015-December/082976.html Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
- 12 Dec, 2015 1 commit
-
-
Rodrigo Vivi authored
This bit is also reserved on Skylake. Actually the only platform that supports this is Haswell, so let's fix this logic and apply this link entry time only for the platform that supports it, i.e. Haswell. This also changes the style to let more clear platform differences outside the reg write. We would probably catch this case sooner if separated, or not... Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449880291-21388-1-git-send-email-rodrigo.vivi@intel.com
-
- 11 Dec, 2015 6 commits
-
-
Daniel Vetter authored
Add get_eld audio component for i915/HD-audio Currently, the HDMI/DP audio status and ELD are notified and obtained via the hardware-level communication over HD-audio unsolicited event and verbs although the graphics driver holds the exactly same information. As we already have a notification via audio component, this is another step forward; namely, the audio driver may fetch directly the audio status and ELD via the new component op. Signed-off-by:Daniel Vetter <daniel.vetter@intel.com>
-
Dave Gordon authored
When creating a new (pageable) GEM object and filling it with data, we must mark it as 'dirty', i.e. backing store is out-of-date w.r.t. the newly-written content. This ensures that if the object is evicted under memory pressure, its pages in the pagecache will be written to backing store rather than discarded. Based on an original version by Alex Dai. Signed-off-by:
Alex Dai <yu.dai@intel.com> Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1449773486-30822-3-git-send-email-david.s.gordon@intel.comReviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Dave Gordon authored
In various places, a single page of a (regular) GEM object is mapped into CPU address space and updated. In each such case, either the page or the the object should be marked dirty, to ensure that the modifications are not discarded if the object is evicted under memory pressure. The typical sequence is: va = kmap_atomic(i915_gem_object_get_page(obj, pageno)); *(va+offset) = ... kunmap_atomic(va); Here we introduce i915_gem_object_get_dirty_page(), which performs the same operation as i915_gem_object_get_page() but with the side-effect of marking the returned page dirty in the pagecache. This will ensure that if the object is subsequently evicted (due to memory pressure), the changes are written to backing store rather than discarded. Note that it works only for regular (shmfs-backed) GEM objects, but (at least for now) those are the only ones that are updated in this way -- the objects in question are contexts and batchbuffers, which are always shmfs-backed. Separate patches deal with the cases where whole objects are (or may be) dirtied. v3: Mark two more pages dirty in the page-boundary-crossing cases of the execbuffer relocation code [Chris Wilson] Signed-off-by: -
Tomas Elf authored
When clearing an execlist queue, instead of traversing it and unreferencing all requests while holding the spinlock (which might lead to thread sleeping with IRQs are turned off - bad news!), just move all requests to the retire request list while holding spinlock and then drop spinlock and invoke the execlists request retirement path, which already deals with the intricacies of purging/dereferencing execlist queue requests. This patch can be considered v3 of: commit b96db8b81c54ef30485ddb5992d63305d86ea8d3 Author: Tomas Elf <tomas.elf@intel.com> drm/i915: Grab execlist spinlock to avoid post-reset concurrency issues This patch assumes v2 of the above patch is part of the baseline, reverts v2 and adds changes on top to turn it into v3. Signed-off-by:
Tomas Elf <tomas.elf@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1445619757-19822-1-git-send-email-tomas.elf@intel.comReviewed-by:
Thomas Daniel <thomas.daniel@intel.com> Reviewed-by:
Dave Gordon <dave.gordon@intel.com> Signed-off-by:
-
Deepak M authored
Pipe is assigned based on the port, but it should be based on current crtc. Correcting the same in this patch. v2: Use macro BXT_PIPE_SELECT(pipe) (Daniel) Signed-off-by:
-
Deepak M authored
To be used on systems where the VBT does not fit into the normal VBT mailbox. v3: rebase Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 10 Dec, 2015 14 commits
-
-
Rodrigo Vivi authored
Mainly aux communications on sink_crc were failing a lot randomly on recent platforms. The first solution was to try to use intel_dp_dpcd_read_wake, but then it was suggested to move retries to drm level. Since drm level was already taking care of retries and didn't want to through random retries on that level the second solution was to put the retries at aux_transfer layer what was nacked. So I realized we had so many retries in different places and started to organize that a bit. During this organization I noticed that we weren't handing at all the case were the message size was zeroed. And this was exactly the case that was affecting sink_crc. Also we weren't respect BSPec who says this size message = 0 or > 20 are forbidden. It is a fact that we still have no clue why we are getting this forbidden value there. But anyway we need to handle that for now so we return -EBUSY and drm level takes care of the retries that are already in place. v2: Print debug messsage when this case is reached as suggested by Jani. v3: This patch is crucial to make PSR test cases reliably working on SKL. So split this patch from the aux re-org series and add a FIXME as a promisse to continue that effort besides reminding to remove the sleep when that is merged. v4: Use a bigger usleep range so kernel doesn't need to be interrupted on a exact time, as suggested by Paulo. But anyway we should discuss the better time ranges on the EBUSY handle re-org at drm level since this one here is temporary. v5: s/1000,1500/1000, 1500/ (by Paulo). Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: -
Dave Gordon authored
Based on Chris Wilson's patch from 6 months ago, rebased and adapted. The current implementation of intel_ring_initialized() is too heavyweight; it's a non-inlined function that chases several levels of pointers. This wouldn't matter too much if it were rarely called, but it's used inside the iterator test of for_each_ring() and is therefore called quite frequently. So let's make it simple and inline ... The idea here is to use ring->dev as an indicator showing which engines have been initialised and are therefore to be included in iterations that use for_each_ring(). This allows us to avoid multiple memory references and a (non-inlined) function call on each iteration of each such loop. Fixes regression from commit 48d82387 Author: Oscar Mateo <oscar.mateo@intel.com> Date: Thu Jul 24 17:04:23 2014 +0100 drm/i915/bdw: Generic logical ring init and cleanup Signed-off-by:
-
Takashi Iwai authored
This patch adds a reverse mapping from a digital port number to intel_encoder object containing the corresponding intel_digital_port. It simplifies the query of the encoder a lot. Note that, even if it's a valid digital port, the dig_port_map[] might point still to NULL -- usually it implies a DP MST port. Due to this fact, the NULL check in each place has no WARN_ON() and just skips the port. Once when the situation changes in future, we might introduce WARN_ON() for a more strict check. Signed-off-by:Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Implement a new i915_audio_component_ops, get_eld(). It's called by the audio driver to fetch the current audio status and ELD of the given HDMI/DP port. It returns the size of expected ELD bytes if it's valid, zero if no valid ELD is found, or a negative error code. The current state of audio on/off is stored in the given pointer, too. Note that the returned size isn't limited to the given max bytes. If the size is greater than the max bytes, it means that only a part of ELD has been copied back. For achieving this implementation, a new field audio_connector is added to struct intel_digital_port. It points to the connector assigned to the given digital port. It's set/reset at each audio enable/disable call in intel_audio.c, and protected with av_mutex. Reviewed-by:
-
Maarten Lankhorst authored
When disable_noatomic is called plane_mask is not correct yet, and plane_state->visible = true is left as true after disabling the primary plane. Other planes are already disabled as part of crtc sanitization, only the primary is left active. But the plane_mask is not updated here. It gets updated during fb takeover in modeset_gem_init, or set to the new value on resume. This means that to disable the primary plane 1 << drm_plane_index(primary) needs to be used. Afterwards because the crtc is no longer active it's forbidden to keep plane_state->visible set, or a WARN_ON in intel_plane_atomic_calc_changes triggers. There are other code points that rely on accurate plane_state->visible too, so make sure the bool is cleared. The other planes are already disabled in intel_sanitize_crtc, so they don't have to be handled here. Cc: stable@vger.kernel.org #v4.3, v4.2? Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92655Tested-by:
Tomas Mezzadra <tmezzadra@gmail.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
-
Wayne Boyer authored
Do some further clean up based on the initial review of drm/i915: Separate cherryview from valleyview. In this case remove the BUG_ON call in vlv_enable_pll(). v2: Also remove the BUG_ON call in chv_enable_pll(). (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Wayne Boyer <wayne.boyer@intel.com> Signed-off-by:
-
Wayne Boyer authored
Do some further clean up based on the initial review of drm/i915: Separate cherryview from valleyview. In this case, in i915_gem_alloc_context_obj() only call i915_gem_object_set_cache_level() for Ivy Bridge devices since later platforms don't have L3 control bits in the PTE. v2: Expand comment to mention snooping requirement. (Ville, Imre) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Wayne Boyer authored
Do some further clean up based on the initial review of drm/i915: Separate cherryview from valleyview. In this case remove a hack for VLV A0. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Wayne Boyer authored
Do some further clean up based on the initial review of drm/i915: Separate cherryview from valleyview. In this case check for '(GEN7 || GEN8) && HAS_PCH_SPLIT' since we're reading FUSE_STRAP and SFUSE_STRAP which live in the PCH. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Wayne Boyer authored
The cherryview device shares many characteristics with the valleyview device. When support was added to the driver for cherryview, the corresponding device info structure included .is_valleyview = 1. This is not correct and leads to some confusion. This patch changes .is_valleyview to .is_cherryview in the cherryview device info structure and simplifies the IS_CHERRYVIEW macro. Then where appropriate, instances of IS_VALLEYVIEW are replaced with IS_VALLEYVIEW || IS_CHERRYVIEW or equivalent. v2: Use IS_VALLEYVIEW || IS_CHERRYVIEW instead of defining a new macro. Also add followup patches to fix issues discovered during the first review. (Ville) v3: Fix some style issues and one gen check. Remove CRT related changes as CRT is not supported on CHV. (Imre, Ville) v4: Make a few more optimizations. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: -
Joonas Lahtinen authored
In order to avoid accessing GPU registers while GPU is suspended cancel the hangcheck work before calling intel_suspend_complete which actually puts the GPU to suspend. Otherwise hangcheck might do MMIO reads to a suspended GPU. Placement before intel_guc_suspend is imitated from i915_drm_suspend which cancels the work at i915_gem_suspend, to keep the functions similar. On VLV systems, namely BYT, this was causing an error during runtime suspend cycle: [drm:vlv_check_no_gt_access [i915]] *ERROR* GT register access while GT waking disabled Testcase: igt/pm_rpm/basic-rte Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93121Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1449669373-8588-1-git-send-email-joonas.lahtinen@linux.intel.comReviewed-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Libin Yang authored
This patch adds support for DP MST audio in i915. Enable audio codec when DP MST is enabled if has_audio flag is set. Disable audio codec when DP MST is disabled if has_audio flag is set. Another separated patches to support DP MST audio will be implemented in audio driver. Reviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by:
Libin Yang <libin.yang@linux.intel.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Libin Yang authored
This adds code to initialise the SDP streams for a sink in the simplest ordering. I've no idea how you'd want to control the ordering at this level, so don't bother until someone comes up with a use case. Reviewed-by:
-
Dave Gordon authored
All of these iterator macros require a 'temp' argument, used merely to hold internal partial results. We can instead declare the temporary variable inside the macro, so the caller need not provide it. Some of the old code contained nested iterators that actually reused the same 'temp' variable for both inner and outer instances. It's quite surprising that this didn't introduce bugs! But it does show that the value of 'temp' isn't required to persist during the iterated body. Signed-off-by:
-
- 09 Dec, 2015 6 commits
-
-
Rodrigo Vivi authored
Kabylake A0 is based on Skylake H0. v2: Don't assume revid+7 and only load the one we are sure about. v3: Rebase on top of latest changes. v4: Accept cleaner solution from Jani with kbl_stepping_info starting on H0 instead of put a hack on revid. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: -
Sudip Mukherjee authored
We were not checking the return value of drm_encoder_init() which can fail. And if it fails then we will be working with an uninitialized encoder. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Chris Wilson authored
Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Acked-by: PDT Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
-
Julia Lawall authored
The intel_dvo_dev_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Rodrigo Vivi authored
GuC has no version for KBL published yet and it is not recommended to load the Skylake one, so let's avoid loading this for now while we don't have the proper GuC firmware for Kabylake. Signed-off-by:
-
Rodrigo Vivi authored
Let's introduce ULT and ULX Kabylake definitions and start using it for a propper DDI buffer translation. v2: Remove extra white space. (Paulo) Signed-off-by:
-
- 08 Dec, 2015 7 commits
-
-
Imre Deak authored
As described in the code comment, I couldn't set the minimum RPS frequency on my BYT-M B0 to the minimum allowed as reported by Punit. Fix this by clamping the minimum value to the first one that was accepted on my machine. Atm this issue doesn't cause any test failures, since in igt/pm_rps we only check the cached version of the current frequency which is the same what has been set. In the future we'll add checks for the actual frequency too, and for that to pass this fix is necessary. Signed-off-by:
-
Ville Syrjälä authored
Currently we disable some parts of FDI setup after a failed link training. But despite that we continue with the modeset as if everything is fine. This results in tons of noise from the state checker, and it means we're not following the proper modeset sequence for the rest of crtc enabling, nor for crtc disabling. Ideally we should abort the modeset and follow the proper disable sequence to shut off everything we enabled so far, but that would require a big rework of the modeset code. So instead just leave FDI up and running in its untrained state, and log an error. This is what we do on older platforms too. v2: Fix a typo in the commit message Signed-off-by:
-
Ville Syrjälä authored
Currently we leave the LPT-H VGA dotclock running after turning the pipe/fdi/port/etc. Properly disable the VGA dotclock as specified in the modeset sequence. v2: Fix commit message typo (Paulo) Signed-off-by:
-
Ville Syrjälä authored
Extract the LPT-H VGA dotclock disable to a separate function in anticipation of further use. While at it move the sb_lock locking inwards when enabling the VGA dotclock, as it's only needed to protect the sideband accesses. v2: Keep the PIXCLK_GATE_GATE name for 0 (Paulo) Signed-off-by:
-
Ville Syrjälä authored
Bspec modeset sequence tells us to disable the PCH transcoder and FDI after the CRT port on LPT-H, so let's do that. And the CRT port should be disabled after the pipe, as we do on other PCH platforms too since commit 1ea56e26 ("drm/i915: Disable CRT port after pipe on PCH platforms") commit 00490c22 ("drm/i915: Consider SPLL as another shared pll, v2.") moved the SPLL disable from the .post_disable() hook to some upper level code, so we can just move the CRT port disabling into the .post_disable() hook. If we still had the non-shared SPLL, it would have needed to be moved into the .post_pll_disable() hook. v2: Actually move the CRT port disable to the .post_disable() hook, and amend the commit message with more details (Paulo) v3: Fix typos in commit message (Paulo) Cc: Paulo Zanoni <przanoni@gmail.com> Signed-off-by:
-
Ville Syrjälä authored
Bspec says we should round to closest when computing the LPT-H VGA dotclock, so let's do that. v2: Fix typo in commit message (Paulo) Signed-off-by:
-
Ville Syrjälä authored
When we want to use SPLL for FDI we want SSC, which means we have to disable clock bending for the PCH SSC reference (bend and spread are mutually exclusive). So let's turn off bending when we want spread. In case the BIOS enabled clock bending for some reason we'll just turn it off and enable the spread mode instead. Not sure what happens if the BIOS is actually using the bend source for HDMI at this time, but I suppose it should be no worse than what already happens when we simply turn on the spread. We don't currently use the bend source for anything, and only use the PCH SSC reference for the SPLL to drive FDI (always with spread). v2: Fix the %5 vs %10 fumble for SSCDITHPHASE (Paulo) Add 'WARN_ON(steps % 5 != 0)' sanity check (Paulo) Fix typos in commit message (Paulo) Cc: Paulo Zanoni <przanoni@gmail.com> Signed-off-by:
-
