- 26 Oct, 2015 40 commits
-
-
Eric Dumazet authored
commit 675ee231 upstream. RST packets sent on behalf of TCP connections with TS option (RFC 7323 TCP timestamps) have incorrect TS val (set to 0), but correct TS ecr. A > B: Flags [S], seq 0, win 65535, options [mss 1000,nop,nop,TS val 100 ecr 0], length 0 B > A: Flags [S.], seq 2444755794, ack 1, win 28960, options [mss 1460,nop,nop,TS val 7264344 ecr 100], length 0 A > B: Flags [.], ack 1, win 65535, options [nop,nop,TS val 110 ecr 7264344], length 0 B > A: Flags [R.], seq 1, ack 1, win 28960, options [nop,nop,TS val 0 ecr 110], length 0 We need to call skb_mstamp_get() to get proper TS val, derived from skb->skb_mstamp Note that RFC 1323 was advocating to not send TS option in RST segment, but RFC 7323 recommends the opposite : Once TSopt has been successfully negotiated, that is both <SYN> and <SYN,ACK> contain TSopt, the TSopt MUST be sent in every non-<RST> segment for the duration of the connection, and SHOULD be sent in an <RST> segment (see Section 5.2 for details) Note this RFC recommends to send TS val = 0, but we believe it is premature : We do not know if all TCP stacks are properly handling the receive side : When an <RST> segment is received, it MUST NOT be subjected to the PAWS check by verifying an acceptable value in SEG.TSval, and information from the Timestamps option MUST NOT be used to update connection state information. SEG.TSecr MAY be used to provide stricter <RST> acceptance checks. In 5 years, if/when all TCP stack are RFC 7323 ready, we might consider to decide to send TS val = 0, if it buys something. Fixes: 7faee5c0 ("tcp: remove TCP_SKB_CB(skb)->when") Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Doug Anderson authored
commit 7ae85dc7 upstream. In (23a4e405 arm: kgdb: Handle read-only text / modules) we moved to using patch_text() to set breakpoints so that we could handle the case when we had CONFIG_DEBUG_RODATA. That patch used patch_text(). Unfortunately, patch_text() assumes that we're not in atomic context when it runs since it needs to grab a mutex and also wait for other CPUs to stop (which it does with a completion). This would result in a stack crawl if you had CONFIG_DEBUG_ATOMIC_SLEEP and tried to set a breakpoint in kgdb. The crawl looked something like: BUG: scheduling while atomic: swapper/0/0/0x00010007 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc7-00133-geb63b34b #1073 Hardware name: Rockchip (Device Tree) (unwind_backtrace) from [<c00133d4>] (show_stack+0x20/0x24) (show_stack) from [<c05400e8>] (dump_stack+0x84/0xb8) (dump_stack) from [<c004913c>] (__schedule_bug+0x54/0x6c) (__schedule_bug) from [<c054065c>] (__schedule+0x80/0x668) (__schedule) from [<c0540cfc>] (schedule+0xb8/0xd4) (schedule) from [<c0543a3c>] (schedule_timeout+0x2c/0x234) (schedule_timeout) from [<c05417c0>] (wait_for_common+0xf4/0x188) (wait_for_common) from [<c0541874>] (wait_for_completion+0x20/0x24) (wait_for_completion) from [<c00a0104>] (__stop_cpus+0x58/0x70) (__stop_cpus) from [<c00a0580>] (stop_cpus+0x3c/0x54) (stop_cpus) from [<c00a06c4>] (__stop_machine+0xcc/0xe8) (__stop_machine) from [<c00a0714>] (stop_machine+0x34/0x44) (stop_machine) from [<c00173e8>] (patch_text+0x28/0x34) (patch_text) from [<c001733c>] (kgdb_arch_set_breakpoint+0x40/0x4c) (kgdb_arch_set_breakpoint) from [<c00a0d68>] (kgdb_validate_break_address+0x2c/0x60) (kgdb_validate_break_address) from [<c00a0e90>] (dbg_set_sw_break+0x1c/0xdc) (dbg_set_sw_break) from [<c00a2e88>] (gdb_serial_stub+0x9c4/0xba4) (gdb_serial_stub) from [<c00a11cc>] (kgdb_cpu_enter+0x1f8/0x60c) (kgdb_cpu_enter) from [<c00a18cc>] (kgdb_handle_exception+0x19c/0x1d0) (kgdb_handle_exception) from [<c0016f7c>] (kgdb_compiled_brk_fn+0x30/0x3c) (kgdb_compiled_brk_fn) from [<c00091a4>] (do_undefinstr+0x1a4/0x20c) (do_undefinstr) from [<c001400c>] (__und_svc_finish+0x0/0x34) It turns out that when we're in kgdb all the CPUs are stopped anyway so there's no reason we should be calling patch_text(). We can instead directly call __patch_text() which assumes that CPUs have already been stopped. Fixes: 23a4e405 ("arm: kgdb: Handle read-only text / modules") Reported-by:
Aapo Vienamo <avienamo@nvidia.com> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Jiri Benc authored
commit 9dc2ad10 upstream. vxlan_setup is called when allocating the net_device, i.e. way before vxlan_newlink (or vxlan_dev_configure) is called. This means vxlan->default_dst is actually unset in vxlan_setup and the condition that sets needed_headroom always takes the else branch. Set the needed_headrom at the point when we have the information about the address family available. Fixes: e4c7ed41 ("vxlan: add ipv6 support") Fixes: 2853af6a ("vxlan: use dev->needed_headroom instead of dev->hard_header_len") CC: Cong Wang <cwang@twopensource.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Nishanth Menon authored
commit a3b74709 upstream. When commit c4082d49 ("ARM: omap2+: board-generic: clean up the irq data from board file") cleaned up the direct usage of gic_of_init and omap_intc_of_init, it failed to clean up the macros properly. Since these macros are no longer used, lets just remove them. Fixes: c4082d49 ("ARM: omap2+: board-generic: clean up the irq data from board file") Reported-by:
Carlos Hernandez <ceh@ti.com> Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Pablo Neira Ayuso authored
commit ad5001cc upstream. The nf_log_unregister() function needs to call synchronize_rcu() to make sure that the objects are not dereferenced anymore on module removal. Fixes: 5962815a ("netfilter: nf_log: use an array of loggers instead of list") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jesse Gross authored
commit ae5f2fb1 upstream. When support for megaflows was introduced, OVS needed to start installing flows with a mask applied to them. Since masking is an expensive operation, OVS also had an optimization that would only take the parts of the flow keys that were covered by a non-zero mask. The values stored in the remaining pieces should not matter because they are masked out. While this works fine for the purposes of matching (which must always look at the mask), serialization to netlink can be problematic. Since the flow and the mask are serialized separately, the uninitialized portions of the flow can be encoded with whatever values happen to be present. In terms of functionality, this has little effect since these fields will be masked out by definition. However, it leaks kernel memory to userspace, which is a potential security vulnerability. It is also possible that other code paths could look at the masked key and get uninitialized data, although this does not currently appear to be an issue in practice. This removes the mask optimization for flows that are being installed. This was always intended to be the case as the mask optimizations were really targetting per-packet flow operations. Fixes: 03f0d916 ("openvswitch: Mega flow implementation") Signed-off-by:
Jesse Gross <jesse@nicira.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Pablo Neira Ayuso authored
commit ba378ca9 upstream. Fix lookup of existing match/target structures in the corresponding list by skipping the family check if NFPROTO_UNSPEC is used. This is resulting in the allocation and insertion of one match/target structure for each use of them. So this not only bloats memory consumption but also severely affects the time to reload the ruleset from the iptables-compat utility. After this patch, iptables-compat-restore and iptables-compat take almost the same time to reload large rulesets. Fixes: 0ca743a5 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit caa47047 upstream. The original patch introducing this header wrote the number of CPUs available and online in one order and then swapped those values when reading, fix it. Before: # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 4 # echo 0 > /sys/devices/system/cpu/cpu2/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 3 # echo 0 > /sys/devices/system/cpu/cpu1/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 2 After the fix, bringing back the CPUs online: # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 2 # nrcpus avail : 4 # echo 1 > /sys/devices/system/cpu/cpu2/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 3 # nrcpus avail : 4 # echo 1 > /sys/devices/system/cpu/cpu1/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 4 Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: fbe96f29 ("perf tools: Make perf.data more self-descriptive (v8)") Link: http://lkml.kernel.org/r/20150911153323.GP23511@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Sudip Mukherjee authored
commit dd85ebf6 upstream. During the last close we are freeing spidev if spidev->spi is NULL, but just before checking if spidev->spi is NULL we are dereferencing it. Lets add a check there to avoid the NULL dereference. Fixes: 91690516 ("spi: spidev: Don't mangle max_speed_hz in underlying spi device") Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Reviewed-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Alex Williamson authored
commit da2d03ea upstream. 932c435c ("PCI: Add dev_flags bit to access VPD through function 0") added PCI_DEV_FLAGS_VPD_REF_F0. Previously, we set the flag on every non-zero function of quirked devices. If a function turned out to be different from function 0, i.e., it had a different class, vendor ID, or device ID, the flag remained set but we didn't make VPD accessible at all. Flip this around so we only set PCI_DEV_FLAGS_VPD_REF_F0 for functions that are identical to function 0, and allow regular VPD access for any other functions. [bhelgaas: changelog, stable tag] Fixes: 932c435c ("PCI: Add dev_flags bit to access VPD through function 0") Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Bjorn Helgaas <helgaas@kernel.org> Acked-by:
Myron Stowe <myron.stowe@redhat.com> Acked-by:
Mark Rustad <mark.d.rustad@intel.com> Signed-off-by:
-
Alex Williamson authored
commit 9d924075 upstream. Commit 932c435c ("PCI: Add dev_flags bit to access VPD through function 0") passes PCI_SLOT(devfn) for the devfn parameter of pci_get_slot(). Generally this works because we're fairly well guaranteed that a PCIe device is at slot address 0, but for the general case, including conventional PCI, it's incorrect. We need to get the slot and then convert it back into a devfn. Fixes: 932c435c ("PCI: Add dev_flags bit to access VPD through function 0") Signed-off-by:
-
Steve French authored
commit ceb1b0b9 upstream. Kerberos, which is very important for security, was only enabled for CIFS not SMB2/SMB3 mounts (e.g. vers=3.0) Patch based on the information detailed in http://thread.gmane.org/gmane.linux.kernel.cifs/10081/focus=10307 to enable Kerberized SMB2/SMB3 a) SMB2_negotiate: enable/use decode_negTokenInit in SMB2_negotiate b) SMB2_sess_setup: handle Kerberos sectype and replicate Kerberos SMB1 processing done in sess_auth_kerberos Signed-off-by:
Noel Power <noel.power@suse.com> Signed-off-by:
Jim McDonough <jmcd@samba.org> Signed-off-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
-
Dave Airlie authored
commit 69e5d3f8 upstream. If the server isn't new enough to give us state, report the first monitor as always connected, otherwise believe the server side. Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Jani Nikula authored
commit cd67d226 upstream. The VBT MIPI Sequence Block version 3 has forward incompatible changes: First, the block size in the header has been specified reserved, and the actual size is a separate 32-bit value within the block. The current find_section() function to will only look at the size in the block header, and, depending on what's in that now reserved size field, continue looking for other sections in the wrong place. Fix this by taking the new block size field into account. This will ensure that the lookups for other sections will work properly, as long as the new 32-bit size does not go beyond the opregion VBT mailbox size. Second, the contents of the block have been completely changed. Gracefully refuse parsing the yet unknown data version. Cc: Deepak M <m.deepak@intel.com> Reviewed-by:
Deepak M <m.deepak@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Joseph Qi authored
commit 012572d4 upstream. The order of the following three spinlocks should be: dlm_domain_lock < dlm_ctxt->spinlock < dlm_lock_resource->spinlock But dlm_dispatch_assert_master() is called while holding dlm_ctxt->spinlock and dlm_lock_resource->spinlock, and then it calls dlm_grab() which will take dlm_domain_lock. Once another thread (for example, dlm_query_join_handler) has already taken dlm_domain_lock, and tries to take dlm_ctxt->spinlock deadlock happens. Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: "Junxiao Bi" <junxiao.bi@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Robert Jarzmik authored
commit 8811191f upstream. PCM receive and transmit DMA requestor lines were reverted, breaking the PCM playback interface for PXA platforms using the sound/soc/ variant instead of the sound/arm variant. The commit below shows the inversion in the requestor lines. Fixes: d65a1458 ("ASoC: pxa: use snd_dmaengine_dai_dma_data") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Andy Lutomirski authored
commit 83c133cf upstream. The NMI entry code that switches to the normal kernel stack needs to be very careful not to clobber any extra stack slots on the NMI stack. The code is fine under the assumption that SWAPGS is just a normal instruction, but that assumption isn't really true. Use SWAPGS_UNSAFE_STACK instead. This is part of a fix for some random crashes that Sasha saw. Fixes: 9b6e6a83 ("x86/nmi/64: Switch stacks on userspace NMI entry") Reported-and-tested-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Link: http://lkml.kernel.org/r/974bc40edffdb5c2950a5c4977f821a446b76178.1442791737.git.luto@kernel.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> [ luis: backported to 3.16: - file rename: arch/x86/entry/entry_64.S -> arch/x86/kernel/entry_64.S - adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
Andy Lutomirski authored
commit fc57a7c6 upstream. PARAVIRT_ADJUST_EXCEPTION_FRAME generates this code (using nmi as an example, trimmed for readability): ff 15 00 00 00 00 callq *0x0(%rip) # 2796 <nmi+0x6> 2792: R_X86_64_PC32 pv_irq_ops+0x2c That's a call through a function pointer to regular C function that does nothing on native boots, but that function isn't protected against kprobes, isn't marked notrace, and is certainly not guaranteed to preserve any registers if the compiler is feeling perverse. This is bad news for a CLBR_NONE operation. Of course, if everything works correctly, once paravirt ops are patched, it gets nopped out, but what if we hit this code before paravirt ops are patched in? This can potentially cause breakage that is very difficult to debug. A more subtle failure is possible here, too: if _paravirt_nop uses the stack at all (even just to push RBP), it will overwrite the "NMI executing" variable if it's called in the NMI prologue. The Xen case, perhaps surprisingly, is fine, because it's already written in asm. Fix all of the cases that default to paravirt_nop (including adjust_exception_frame) with a big hammer: replace paravirt_nop with an asm function that is just a ret instruction. The Xen case may have other problems, so document them. This is part of a fix for some random crashes that Sasha saw. Reported-and-tested-by:
-
Peter Seiderer authored
commit 98ce94c8 upstream. Linux cifs mount with ntlmssp against an Mac OS X (Yosemite 10.10.5) share fails in case the clocks differ more than +/-2h: digest-service: digest-request: od failed with 2 proto=ntlmv2 digest-service: digest-request: kdc failed with -1561745592 proto=ntlmv2 Fix this by (re-)using the given server timestamp for the ntlmv2 authentication (as Windows 7 does). A related problem was also reported earlier by Namjae Jaen (see below): Windows machine has extended security feature which refuse to allow authentication when there is time difference between server time and client time when ntlmv2 negotiation is used. This problem is prevalent in embedded enviornment where system time is set to default 1970. Modern servers send the server timestamp in the TargetInfo Av_Pair structure in the challenge message [see MS-NLMP 2.2.2.1] In [MS-NLMP 3.1.5.1.2] it is explicitly mentioned that the client must use the server provided timestamp if present OR current time if it is not Reported-by:
Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by:
Peter Seiderer <ps.report@gmx.net> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Steve French authored
commit e0ddde9d upstream. leases (oplocks) were always requested for SMB2/SMB3 even when oplocks disabled in the cifs.ko module. Signed-off-by:
Chandrika Srinivasan <chandrika.srinivasan@citrix.com> Signed-off-by:
-
Max Filippov authored
commit b0b48550 upstream. XTFPGA SPI controller has native endian registers. Fix register acessors so that they work in big-endian configurations. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Ludovic Desroches authored
commit d32dc9aa upstream. When masking/unmasking interrupts, mask_cache is updated and used later for suspend/resume. Unfortunately, it always was the mask_cache associated with the first irq chip which was updated. So when performing resume, only irqs 0-31 could be enabled. Fixes: b1479ebb ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers") Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Cc: <sasha.levin@oracle.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <nicolas.ferre@atmel.com> Cc: <alexandre.belloni@free-electrons.com> Cc: <boris.brezillon@free-electrons.com> Cc: <Wenyou.Yang@atmel.com> Cc: <jason@lakedaemon.net> Cc: <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1442843173-2390-1-git-send-email-ludovic.desroches@atmel.comSigned-off-by:
-
Mathias Nyman authored
commit cc8e4fc0 upstream. Don't check if timer is running with a timer_pending() before deleting it with del_timer_sync(), this defies the whole point of the sync part and can cause a possible race. Instead we just want to make sure the timer is initialized early enough before we have a chance to delete it. Reported-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Julia Lawall authored
commit 9e08a03d upstream. Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Mathias Nyman authored
commit dca77945 upstream. Some changes between xhci 0.96 and xhci 1.0 specifications forced us to check the hci version in code, some of these checks were implemented as hci_version == 1.0, which will not work with new xhci 1.1 controllers. xhci 1.1 behaves similar to xhci 1.0 in these cases, so change these checks to hci_version >= 1.0 Signed-off-by:
-
Roger Quadros authored
commit 448116bf upstream. During quick plug/removal of OTG adapter during dual-role testing it can happen that xhci_alloc_device() is called for the newly detected device after the DRD library has called xhci_stop to remove the HCD. If that is the case, just fail early to prevent the following warning. [ 154.732649] hub 4-0:1.0: USB hub found [ 154.742204] hub 4-0:1.0: 1 port detected [ 154.824458] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000 [ 154.854609] hub 4-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 154.944430] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 154.951009] xhci-hcd xhci-hcd.0.auto: xhci_setup_device [ 155.038191] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 155.043315] usb usb4: USB disconnect, device number 1 [ 155.055270] xhci-hcd xhci-hcd.0.auto: xhci_stop [ 155.060094] xhci-hcd xhci-hcd.0.auto: USB bus 4 deregistered [ 155.066576] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 155.071710] usb usb3: USB disconnect, device number 1 [ 155.077124] xhci-hcd xhci-hcd.0.auto: xhci_setup_device [ 155.082389] ------------[ cut here ]------------ [ 155.087690] WARNING: CPU: 0 PID: 72 at drivers/usb/host/xhci.c:3800 xhci_setup_device+0x410/0x484 [xhci_hcd]() [ 155.097861] Modules linked in: sd_mod usb_storage scsi_mod usb_f_ss_lb g_zero libcomposite ipv6 xhci_plat_hcd xhci_hcd usbcore dwc3 udc_core evdev ti_am335x_adc joydev kfifo_buf industrialio snd_soc_simple_cc [ 155.146734] CPU: 0 PID: 72 Comm: kworker/0:3 Tainted: G W 4.1.4-00834-gcd9380b-dirty #50 [ 155.156073] Hardware name: Generic AM43 (Flattened Device Tree) [ 155.162117] Workqueue: usb_hub_wq hub_event [usbcore] [ 155.167249] Backtrace: [ 155.169751] [<c0012af0>] (dump_backtrace) from [<c0012c8c>] (show_stack+0x18/0x1c) [ 155.177390] r6:c089d4a4 r5:ffffffff r4:00000000 r3:ee46c000 [ 155.183137] [<c0012c74>] (show_stack) from [<c05f7c14>] (dump_stack+0x84/0xd0) [ 155.190446] [<c05f7b90>] (dump_stack) from [<c00439ac>] (warn_slowpath_common+0x80/0xbc) [ 155.198605] r7:00000009 r6:00000ed8 r5:bf27eb70 r4:00000000 [ 155.204348] [<c004392c>] (warn_slowpath_common) from [<c0043a0c>] (warn_slowpath_null+0x24/0x2c) [ 155.213202] r8:ee49f000 r7:ee7c0004 r6:00000000 r5:ee7c0158 r4:ee7c0000 [ 155.220051] [<c00439e8>] (warn_slowpath_null) from [<bf27eb70>] (xhci_setup_device+0x410/0x484 [xhci_hcd]) [ 155.229816] [<bf27e760>] (xhci_setup_device [xhci_hcd]) from [<bf27ec10>] (xhci_address_device+0x14/0x18 [xhci_hcd]) [ 155.240415] r10:ee598200 r9:00000001 r8:00000002 r7:00000001 r6:00000003 r5:00000002 [ 155.248363] r4:ee49f000 [ 155.250978] [<bf27ebfc>] (xhci_address_device [xhci_hcd]) from [<bf20cb94>] (hub_port_init+0x1b8/0xa9c [usbcore]) [ 155.261403] [<bf20c9dc>] (hub_port_init [usbcore]) from [<bf2101e0>] (hub_event+0x738/0x1020 [usbcore]) [ 155.270874] r10:ee598200 r9:ee7c0000 r8:ee7c0038 r7:ee518800 r6:ee49f000 r5:00000001 [ 155.278822] r4:00000000 [ 155.281426] [<bf20faa8>] (hub_event [usbcore]) from [<c005754c>] (process_one_work+0x128/0x340) [ 155.290196] r10:00000000 r9:00000003 r8:00000000 r7:fedfa000 r6:eeec5400 r5:ee598314 [ 155.298151] r4:ee434380 [ 155.300718] [<c0057424>] (process_one_work) from [<c00578f8>] (worker_thread+0x158/0x49c) [ 155.308963] r10:ee434380 r9:00000003 r8:eeec5400 r7:00000008 r6:ee434398 r5:eeec5400 [ 155.316913] r4:eeec5414 [ 155.319482] [<c00577a0>] (worker_thread) from [<c005cc40>] (kthread+0xdc/0xf8) [ 155.326765] r10:00000000 r9:00000000 r8:00000000 r7:c00577a0 r6:ee434380 r5:ee4441c0 [ 155.334713] r4:00000000 r3:00000000 [ 155.338341] [<c005cb64>] (kthread) from [<c000fc08>] (ret_from_fork+0x14/0x2c) [ 155.345626] r7:00000000 r6:00000000 r5:c005cb64 r4:ee4441c0 [ 155.356108] ---[ end trace a58d34c223b190e6 ]--- [ 155.360783] xhci-hcd xhci-hcd.0.auto: Virt dev invalid for slot_id 0x1! [ 155.574404] xhci-hcd xhci-hcd.0.auto: xhci_setup_device [ 155.579667] ------------[ cut here ]------------ Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Roger Quadros authored
commit e5bfeab0 upstream. For whatever reason if XHCI died in the previous instant then it will never recover on the next xhci_start unless we clear the DYING flag. Signed-off-by:
-
Roger Quadros authored
commit 85ac90f8 upstream. Else it races with xhci_setup_device Signed-off-by:
-
Mathias Nyman authored
commit a6809ffd upstream. We want to give the command abortion an additional try to stop the command ring before we completely hose xhci. Tested-by:
Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by:
-
Mathias Nyman authored
commit ff30cbc8 upstream. Bits 1:0 of the bmAttributes are used for the burst multiplier. The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7 into use. Use the existing USB_SS_MULT() macro instead to make sure the mult value and hence max packet calculations are correct for USB3.1 devices. Note that burst multiplier in bmAttributes is zero based and that the USB_SS_MULT() macro adds one. Signed-off-by:
-
Paolo Bonzini authored
commit 3afb1121 upstream. These have roughly the same purpose as the SMRR, which we do not need to implement in KVM. However, Linux accesses MSR_K8_TSEG_ADDR at boot, which causes problems when running a Xen dom0 under KVM. Just return 0, meaning that processor protection of SMRAM is not in effect. Reported-by:
M A Young <m.a.young@durham.ac.uk> Acked-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [ luis: backported to 3.16: - file rename: arch/x86/include/asm/msr-index.h -> arch/x86/include/uapi/asm/msr-index.h - adjusted context ] Signed-off-by:
-
Dominik Dingel authored
commit 00cc1633 upstream. Commit 2ee507c4 ("sched: Add function single_task_running to let a task check if it is the only task running on a cpu") referenced the current runqueue with the smp_processor_id. When CONFIG_DEBUG_PREEMPT is enabled, that is only allowed if preemption is disabled or the currrent task is bound to the local cpu (e.g. kernel worker). With commit f7819512 ("kvm: add halt_poll_ns module parameter") KVM calls single_task_running. If CONFIG_DEBUG_PREEMPT is enabled that generates a lot of kernel messages. To avoid adding preemption in that cases, as it would limit the usefulness, we change single_task_running to access directly the cpu local runqueue. Cc: Tim Chen <tim.c.chen@linux.intel.com> Suggested-by:
Peter Zijlstra <peterz@infradead.org> Acked-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
-
Luis Henriques authored
commit 3aaf14da upstream. zcomp_create() verifies the success of zcomp_strm_{multi,single}_create() through comp->stream, which can potentially be pointing to memory that was freed if these functions returned an error. While at it, replace a 'ERR_PTR(-ENOMEM)' by a more generic 'ERR_PTR(error)' as in the future zcomp_strm_{multi,siggle}_create() could return other error codes. Function documentation updated accordingly. Fixes: beca3ec7 ("zram: add multi stream functionality") Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Kyle Evans authored
commit 8a1513b4 upstream. Do not write initialize magic on systems that do not have feature query 0xb. Fixes Bug #82451. Redefine FEATURE_QUERY to align with 0xb and FEATURE2 with 0xd for code clearity. Add a new test function, hp_wmi_bios_2008_later() & simplify hp_wmi_bios_2009_later(), which fixes a bug in cases where an improper value is returned. Probably also fixes Bug #69131. Add missing __init tag. Signed-off-by:
Kyle Evans <kvans32@gmail.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Shawn Lin authored
commit 6fa92e2b upstream. we found this issue but still exit in lastest kernel. Simply keep ion_handle_create under mutex_lock to avoid this race. WARNING: CPU: 2 PID: 2648 at drivers/staging/android/ion/ion.c:512 ion_handle_add+0xb4/0xc0() ion_handle_add: buffer already found. Modules linked in: iwlmvm iwlwifi mac80211 cfg80211 compat CPU: 2 PID: 2648 Comm: TimedEventQueue Tainted: G W 3.14.0 #7 00000000 00000000 9a3efd2c 80faf273 9a3efd6c 9a3efd5c 80935dc9 811d7fd3 9a3efd88 00000a58 812208a0 00000200 80e128d4 80e128d4 8d4ae00c a8cd8600 a8cd8094 9a3efd74 80935e0e 00000009 9a3efd6c 811d7fd3 9a3efd88 9a3efd9c Call Trace: [<80faf273>] dump_stack+0x48/0x69 [<80935dc9>] warn_slowpath_common+0x79/0x90 [<80e128d4>] ? ion_handle_add+0xb4/0xc0 [<80e128d4>] ? ion_handle_add+0xb4/0xc0 [<80935e0e>] warn_slowpath_fmt+0x2e/0x30 [<80e128d4>] ion_handle_add+0xb4/0xc0 [<80e144cc>] ion_import_dma_buf+0x8c/0x110 [<80c517c4>] reg_init+0x364/0x7d0 [<80993363>] ? futex_wait+0x123/0x210 [<80992e0e>] ? get_futex_key+0x16e/0x1e0 [<8099308f>] ? futex_wake+0x5f/0x120 [<80c51e19>] vpu_service_ioctl+0x1e9/0x500 [<80994aec>] ? do_futex+0xec/0x8e0 [<80971080>] ? prepare_to_wait_event+0xc0/0xc0 [<80c51c30>] ? reg_init+0x7d0/0x7d0 [<80a22562>] do_vfs_ioctl+0x2d2/0x4c0 [<80b198ad>] ? inode_has_perm.isra.41+0x2d/0x40 [<80b199cf>] ? file_has_perm+0x7f/0x90 [<80b1a5f7>] ? selinux_file_ioctl+0x47/0xf0 [<80a227a8>] SyS_ioctl+0x58/0x80 [<80fb45e8>] syscall_call+0x7/0x7 [<80fb0000>] ? mmc_do_calc_max_discard+0xab/0xe4 Fixes: 83271f62 ("ion: hold reference to handle...") Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
Marc Zyngier authored
commit 688bc577 upstream. When running a guest with the architected timer disabled (with QEMU and the kernel_irqchip=off option, for example), it is important to make sure the timer gets turned off. Otherwise, the guest may try to enable it anyway, leading to a screaming HW interrupt. The fix is to unconditionally turn off the virtual timer on guest exit. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Marc Zyngier authored
commit c4cbba9f upstream. When running a guest with the architected timer disabled (with QEMU and the kernel_irqchip=off option, for example), it is important to make sure the timer gets turned off. Otherwise, the guest may try to enable it anyway, leading to a screaming HW interrupt. The fix is to unconditionally turn off the virtual timer on guest exit. Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Martin Schwidefsky authored
commit 8d4bd0ed upstream. The uc_sigmask in the ucontext structure is an array of words to keep the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t only has 64 bits). For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit there are two 4 byte words. The compat signal handler code uses a simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t. As s390 is a big-endian architecture this is incorrect, the two words in the 31 bit sigset_t array need to be swapped. Reported-by:
Stefan Liebler <stli@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Will Deacon authored
commit df057cc7 upstream. Cortex-A53 processors <= r0p4 are affected by erratum #843419 which can lead to a memory access using an incorrect address in certain sequences headed by an ADRP instruction. There is a linker fix to generate veneers for ADRP instructions, but this doesn't work for kernel modules which are built as unlinked ELF objects. This patch adds a new config option for the erratum which, when enabled, builds kernel modules with the mcmodel=large flag. This uses absolute addressing for all kernel symbols, thereby removing the use of ADRP as a PC-relative form of addressing. The ADRP relocs are removed from the module loader so that we fail to load any potentially affected modules. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Will Deacon authored
commit bdec97a8 upstream. When saving/restoring the VFP registers from a compat (AArch32) signal frame, we rely on the compat registers forming a prefix of the native register file and therefore make use of copy_{to,from}_user to transfer between the native fpsimd_state and the compat_vfp_sigframe. Unfortunately, this doesn't work so well in a big-endian environment. Our fpsimd save/restore code operates directly on 128-bit quantities (Q registers) whereas the compat_vfp_sigframe represents the registers as an array of 64-bit (D) registers. The architecture packs the compat D registers into the Q registers, with the least significant bytes holding the lower register. Consequently, we need to swap the 64-bit halves when converting between these two representations on a big-endian machine. This patch replaces the __copy_{to,from}_user invocations in our compat VFP signal handling code with explicit __put_user loops that operate on 64-bit values and swap them accordingly. Reviewed-by:
-
