1. 03 Jul, 2013 2 commits
    • Alex Elder's avatar
      rbd: flush dcache after zeroing page data · e2156054
      Alex Elder authored
      Neither zero_bio_chain() nor zero_pages() contains a call to flush
      caches after zeroing a portion of a page.  This can cause problems
      on architectures that have caches that allow virtual address
      aliasing.
      
      This resolves:
          http://tracker.ceph.com/issues/4777Signed-off-by: default avatarAlex Elder <elder@inktank.com>
      Reviewed-by: default avatarJosh Durgin <josh.durgin@inktank.com>
      e2156054
    • Alex Elder's avatar
      libceph: add lingering request reference when registered · 96e4dac6
      Alex Elder authored
      When an osd request is set to linger, the osd client holds onto the
      request so it can be re-submitted following certain osd map changes.
      The osd client holds a reference to the request until it is
      unregistered.  This is used by rbd for watch requests.
      
      Currently, the reference is taken when the request is marked with
      the linger flag.  This means that if an error occurs after that
      time but before the the request completes successfully, that
      reference is leaked.
      
      There's really no reason to take the reference until the request is
      registered in the the osd client's list of lingering requests, and
      that only happens when the lingering (watch) request completes
      successfully.
      
      So take that reference only when it gets registered following
      succesful completion, and drop it (as before) when the request
      gets unregistered.  This avoids the reference problem on error
      in rbd.
      
      Rearrange ceph_osdc_unregister_linger_request() to avoid using
      the request pointer after it may have been freed.
      
      And hold an extra reference in kick_requests() while handling
      a linger request that has not yet been registered, to ensure
      it doesn't go away.
      
      This resolves:
          http://tracker.ceph.com/issues/3859Signed-off-by: default avatarAlex Elder <elder@inktank.com>
      Reviewed-by: default avatarJosh Durgin <josh.durgin@inktank.com>
      96e4dac6
  2. 01 Jul, 2013 5 commits
  3. 30 Jun, 2013 6 commits
    • Linus Torvalds's avatar
      Linux 3.10 · 8bb495e3
      Linus Torvalds authored
      8bb495e3
    • Linus Torvalds's avatar
      Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc · f0277dce
      Linus Torvalds authored
      Pull another powerpc fix from Benjamin Herrenschmidt:
       "I mentioned that while we had fixed the kernel crashes, EEH error
        recovery didn't always recover...  It appears that I had a fix for
        that already in powerpc-next (with a stable CC).
      
        I cherry-picked it today and did a few tests and it seems that things
        now work quite well.  The patch is also pretty simple, so I see no
        reason to wait before merging it."
      
      * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
        powerpc/eeh: Fix fetching bus for single-dev-PE
      f0277dce
    • Linus Torvalds's avatar
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 4b483802
      Linus Torvalds authored
      Pull SCSI fixes from James Bottomley:
       "This is a set of seven bug fixes.  Several fcoe fixes for locking
        problems, initiator issues and a VLAN API change, all of which could
        eventually lead to data corruption, one fix for a qla2xxx locking
        problem which could lead to multiple completions of the same request
        (and subsequent data corruption) and a use after free in the ipr
        driver.  Plus one minor MAINTAINERS file update"
      
      (only six bugfixes in this pull, since I had already pulled the fcoe API
      fix directly from Robert Love)
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        [SCSI] ipr: Avoid target_destroy accessing memory after it was freed
        [SCSI] qla2xxx: Fix for locking issue between driver ISR and mailbox routines
        MAINTAINERS: Fix fcoe mailing list
        libfc: extend ex_lock to protect all of fc_seq_send
        libfc: Correct check for initiator role
        libfcoe: Fix Conflicting FCFs issue in the fabric
      4b483802
    • Gavin Shan's avatar
      powerpc/eeh: Fix fetching bus for single-dev-PE · ea461abf
      Gavin Shan authored
      While running Linux as guest on top of phyp, we possiblly have
      PE that includes single PCI device. However, we didn't return
      its PCI bus correctly and it leads to failure on recovery from
      EEH errors for single-dev-PE. The patch fixes the issue.
      
      Cc: <stable@vger.kernel.org> # v3.7+
      Cc: Steve Best <sbest@us.ibm.com>
      Signed-off-by: default avatarGavin Shan <shangw@linux.vnet.ibm.com>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      ea461abf
    • Linus Torvalds's avatar
      Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc · 6c355bea
      Linus Torvalds authored
      Pull powerpc fixes from Ben Herrenschmidt:
       "We discovered some breakage in our "EEH" (PCI Error Handling) code
        while doing error injection, due to a couple of regressions.  One of
        them is due to a patch (37f02195 "powerpc/pci: fix PCI-e devices
        rescan issue on powerpc platform") that, in hindsight, I shouldn't
        have merged considering that it caused more problems than it solved.
      
        Please pull those two fixes.  One for a simple EEH address cache
        initialization issue.  The other one is a patch from Guenter that I
        had originally planned to put in 3.11 but which happens to also fix
        that other regression (a kernel oops during EEH error handling and
        possibly hotplug).
      
        With those two, the couple of test machines I've hammered with error
        injection are remaining up now.  EEH appears to still fail to recover
        on some devices, so there is another problem that Gavin is looking
        into but at least it's no longer crashing the kernel."
      
      * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
        powerpc/pci: Improve device hotplug initialization
        powerpc/eeh: Add eeh_dev to the cache during boot
      6c355bea
    • Olof Johansson's avatar
      ARM: dt: Only print warning, not WARN() on bad cpu map in device tree · 8d5bc1a6
      Olof Johansson authored
      Due to recent changes and expecations of proper cpu bindings, there are
      now cases for many of the in-tree devicetrees where a WARN() will hit
      on boot due to badly formatted /cpus nodes.
      
      Downgrade this to a pr_warn() to be less alarmist, since it's not a
      new problem.
      
      Tested on Arndale, Cubox, Seaboard and Panda ES. Panda hits the WARN
      without this, the others do not.
      Acked-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8d5bc1a6
  4. 29 Jun, 2013 11 commits
  5. 28 Jun, 2013 4 commits
    • Akira Takeuchi's avatar
      mn10300: Use early_param() to parse "mem=" parameter · e3f12a53
      Akira Takeuchi authored
      This fixes the problem that "init=" options may not be passed to kernel
      correctly.
      
      parse_mem_cmdline() of mn10300 arch gets rid of "mem=" string from
      redboot_command_line. Then init_setup() parses the "init=" options from
      static_command_line, which is a copy of redboot_command_line, and keeps
      the pointer to the init options in execute_command variable.
      
      Since the commit 026cee00 upstream (params: <level>_initcall-like kernel
      parameters), static_command_line becomes overwritten by saved_command_line at
      do_initcall_level(). Notice that saved_command_line is a command line
      which includes "mem=" string.
      
      As a result, execute_command may point to weird string by the length of
      "mem=" parameter.
      I noticed this problem when using the command line like this:
      
          mem=128M console=ttyS0,115200 init=/bin/sh
      
      Here is the processing flow of command line parameters.
          start_kernel()
            setup_arch(&command_line)
               parse_mem_cmdline(cmdline_p)
                 * strcpy(boot_command_line, redboot_command_line);
                 * Remove "mem=xxx" from redboot_command_line.
                 * *cmdline_p = redboot_command_line;
            setup_command_line(command_line) <-- command_line is redboot_command_line
              * strcpy(saved_command_line, boot_command_line)
              * strcpy(static_command_line, command_line)
            parse_early_param()
              strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE);
              parse_early_options(tmp_cmdline);
                parse_args("early options", cmdline, NULL, 0, 0, 0, do_early_param);
            parse_args("Booting ..", static_command_line, ...);
              init_setup() <-- save the pointer in execute_command
            rest_init()
              kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND);
      
      At this point, execute_command points to "/bin/sh" string.
      
          kernel_init()
            kernel_init_freeable()
              do_basic_setup()
                do_initcalls()
                  do_initcall_level()
                    (*) strcpy(static_command_line, saved_command_line);
      
      Here, execute_command gets to point to "200" string !!
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      e3f12a53
    • Akira Takeuchi's avatar
      mn10300: Allow to pass array name to get_user() · c6dc9f0a
      Akira Takeuchi authored
      This fixes the following compile error:
      
      CC block/scsi_ioctl.o
      block/scsi_ioctl.c: In function 'sg_scsi_ioctl':
      block/scsi_ioctl.c:449: error: invalid initializer
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      c6dc9f0a
    • Dave Airlie's avatar
    • Thadeu Lima de Souza Cascardo's avatar
      powerpc/eeh: Add eeh_dev to the cache during boot · 1abd6018
      Thadeu Lima de Souza Cascardo authored
      commit f8f7d63f ("powerpc/eeh: Trace eeh
      device from I/O cache") broke EEH on pseries for devices that were
      present during boot and have not been hotplugged/DLPARed.
      
      eeh_check_failure will get the eeh_dev from the cache, and will get
      NULL. eeh_addr_cache_build adds the addresses to the cache, but eeh_dev
      for the giving pci_device is not set yet. Just reordering the call to
      eeh_addr_cache_insert_dev works fine. The ordering is similar to the one
      in eeh_add_device_late.
      Signed-off-by: default avatarThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
      Acked-by: default avatarGavin Shan <shangw@linux.vnet.ibm.com>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      1abd6018
  6. 27 Jun, 2013 5 commits
    • Josh Durgin's avatar
      rbd: send snapshot context with writes · d2d1f17a
      Josh Durgin authored
      Sending the right snapshot context with each write is required for
      snapshots to work. Due to the ordering of calls, the snapshot context
      is never set for any requests. This causes writes to the current
      version of the image to be reflected in all snapshots, which are
      supposed to be read-only.
      
      This happens because rbd_osd_req_format_write() sets the snapshot
      context based on obj_request->img_request. At this point, however,
      obj_request->img_request has not been set yet, to the snapshot context
      is set to NULL. Fix this by moving rbd_img_obj_request_add(), which
      sets obj_request->img_request, before the osd request formatting
      calls.
      
      This resolves:
          http://tracker.ceph.com/issues/5465Reported-by: default avatarKarol Jurak <karol.jurak@gmail.com>
      Signed-off-by: default avatarJosh Durgin <josh.durgin@inktank.com>
      Reviewed-by: default avatarSage Weil <sage@inktank.com>
      Reviewed-by: default avatarAlex Elder <elder@linaro.org>
      d2d1f17a
    • James Bottomley's avatar
      Merge tag 'fcoe1' into fixes · a9e94ec3
      James Bottomley authored
      This patch fixes a critical bug that was introduced in 3.9
      related to VLAN tagging FCoE frames.
      a9e94ec3
    • James Bottomley's avatar
      Merge tag 'fcoe' into fixes · 36a27968
      James Bottomley authored
      3.10 fixes
      36a27968
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 98b6ed0f
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Found via trinity:
      
          If you connect up an ipv6 socket to an ipv4 mapped address then an
          ipv6 one, sendmsg() can croak because ip6_sk_dst_check() assumes the
          route cached in the socket is an ipv6 one.  In this case there is an
          ipv4 route attached, so it gets stomped on.
      
          Reported by Dave Jones and Hannes Frederic Sowa, fixed by Eric
          Dumazet.
      
       2) AF_KEY notifications leak some kernel memory to userspace, fix from
          Mathias Krause.
      
       3) DLCI calls __dev_get_by_name() without proper locking, and dlci_del
          doesn't validate that the device being deleted is actually a DLCI
          one.  Fixes from Li Zefan.
      
       4) Length check on bluetooth l2cap information responses is wrong, each
          response type has a different lenth, so we should make sure it's in
          a given range rather than enforce one single valid length.  From
          Jaganath Kanakkassery.
      
       5) Receive FIFO overflow is really easy to trigger in stress scenerios
          in the sh_eth driver, but the event isn't being handled properly at
          all.  Specifically, the mask of error interrupts doesn't include the
          event so we never clear it, resulting in the driver becomming wedged
          processing an interrupt that never gets cleared.
      
          Fix from Sergei Shtylyov.
      
       6) qlcnic sleeps while holding a spinlock, use mdelay() instead of
          msleep().  From Shahed Shaikh.
      
       7) Missing curly braces causes SIP netfilter NAT module to always drop
          packets.  Fix from Balazs Peter Odor.
      
       8) ipt_ULOG in netfilter passes the wrong value to timer setup, causing
          the timer to dereference crap when it fires.  Fix from Gao Feng.
      
       9) Missing RCU protection around txq->axq_acq traversal in
          ath_txq_schedule().  Fix from Felix Fietkau.
      
      10) Idle state transition test in ath9k_htc_config() is reversed, fix
          from Sujith Manoharan.
      
      11) IPV6 forwarding handles unicast Router Alert packets incorrectly.
          It tests the wrong option state.  Previously opt->ra being non-zero
          indicated a router alert marking in the SKB, but now it's indicated
          by a bit in opt->flags.  Fix from YOSHIFUJI Hideaki.
      
      12) SKB leak in GRE tunnel GSO handling, from Eric Dumazet.
      
      13) get_user_pages_fast() error handling in TUN and MACVTAP use the same
          local variable for the base index and the loop iterator for page
          traversal, oops! Fix from Michael S Tsirkin.
      
      14) ipv6_get_lladdr() can fail, and we must therefore check it's return
          value in inet6_set_iftoken().  For from Hannes Frederic Sowa.
      
      15) If you change an interface name and meanwhile can sneak in something
          that looks up the name (like SO_BINDTODEVICE or SIOCGIFNAME) we can
          deadlock with CONFIG_PREEMPT=n.  Fix this by providing a helper
          function that properly uses raw_seqcount_begin().  From Nicolas
          Schichan.
      
      16) Chain noise calibration test is inverted in iwlwifi, fix from
          Nikolay Martynov.
      
      17) Properly set TX iwlwifi descriptor flags for back requests.  Fix
          from Emmanuel Grumbach.
      
      18) We can't assume skb_transport_header() is set in xt_TCPOPTSTRAP
          module, fix from Pablo Neira Ayuso.
      
      19) Some crummy APs don't provide the proper High Throughput info in
          association response frames.  Add a workaround by assume we'll use
          whatever is in the beacon/probe.  Fix from Johannes Berg.
      
      20) mac80211 call to rate_idx_match_mask() swaps two arguments (mask and
          channel width).  Fix from Simon Wunderlich.
      
      21) xt_TCPMSS (like xt_TCPOPTSTRAP) must not try to handle fragmented
          frames.  Fix from Phil Oester.
      
      22) Fix rate control regression causing iwlwifi/iwlegacy chips to use
          1Mbit/s on pre-11n networks.  From Moshe Benji and Stanslaw Gruszka.
      
      23) Disable brcmsmac power-save functions, they cause regressions.  From
          Arend van Spriel.
      
      24) Enforce a sane minimum MTU in l2cap_build_cmd() otherwise we can
          easily crash.  Fix from Anderson Lizardo.
      
      25) If a learning packet arrives during vxlan_stop() we crash, easily
          fixed by checking netif_running().  From Stephen Hemminger.
      
      26) Static vxlan FDB entries should not be migrated, also from Stephen.
      
      27) skb_clone() failures not handled in vxlan_xmit(), oops.  Also from
          Stephen.
      
      28) Add minimal driver for AR816x/AR817x ethernet chips, from Johannes
          Berg.
      
      29) Fix regression in userspace VLAN acceleration control, added by the
          802.1ad support changes.  Fix from Fernando Luis Vazquez Cao.
      
      30) Interval selection for MLD queries in the bridging code was
          reversed.  Fix from Linus Lüssing.
      
      31) ipv6's ndisc_send_redirect() erroneously writes to the packet we
          received not the packet we are building to send out.  Fix from
          Matthias Schiffer.
      
      32) Don't free netdev before unregistering it, in usb_8dev can driver.
          From Marc Kleine-Budde.
      
      33) Fix nl80211 attribute buffer races, from Johannes Berg.
      
      34) Although netlink_diag.h is under uapi/ it isn't present in Kbuild.
          From Stephen Hemminger.
      
      35) Wrong address and family passed to MD5 key lookups in TCP, from
          Aydin Arik.
      
      36) phy_type attribute created by SFC driver should not be writable.
          From Ben Hutchings.
      
      37) Receive/Transmit queue allocations in pxa168_eth and mv643xx_eth
          should use kzalloc().  Otherwise if setup fails half-way, we'll
          dereference garbage when trying to teardown the rings.  From Lubomir
          Rintel.
      
      38) Fix double-allocation of dst (resulting in unfreeable net device) in
          ipv6's init_loopback().  From Gao Feng.
      
      39) Fix fragmentation handling SKB leak in netfilter conntrack, we were
          freeing the wrong skb pointer.  From Phil Oester.
      
      40) Don't report "-1" (SPEED_UNKNOWN) in bond_miimon_commit(), from
          Nikolay Aleksandrov.
      
      41) davinci_cpdma doesn't check for DMA mapping errors, letting the
          device scribble to random addresses.  From Sebastian Siewior.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
        dlci: validate the net device in dlci_del()
        dlci: acquire rtnl_lock before calling __dev_get_by_name()
        af_key: fix info leaks in notify messages
        ipv6: ip6_sk_dst_check() must not assume ipv6 dst
        net: fix kernel deadlock with interface rename and netdev name retrieval.
        net/tg3: Avoid delay during MMIO access
        ipv6: check return value of ipv6_get_lladdr
        macvtap: fix recovery from gup errors
        tun: fix recovery from gup errors
        gre: fix a possible skb leak
        ipv6: Process unicast packet with Router Alert by checking flag in skb.
        ath9k_htc: Handle IDLE state transition properly
        ath9k: fix an RCU issue in calling ieee80211_get_tx_rates
        netfilter: ipt_ULOG: fix incorrect setting of ulog timer
        netfilter: ctnetlink: send event when conntrack label was modified
        netfilter: nf_nat_sip: fix mangling
        qlcnic: Do not sleep while holding spinlock
        drivers: net: cpsw: fix compilation error with cpsw driver
        tcp: doc : fix the syncookies default value
        sh_eth: fix misreporting of transmit abort
        ...
      98b6ed0f
    • Linus Torvalds's avatar
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · 1a506e47
      Linus Torvalds authored
      Pull i915 drm fixes from Dave Airlie:
       "These should be the last two fixes for i915, one is for a fence leak
        killing X on some older GPUs, and one is a late regression partial
        revert for an swiotlb/xen/i915 interaction, Konrad has promised to
        figure out the proper answer, and this patch is the best thing to do
        at this stage to avoid regressing"
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
        drm/i915: make compact dma scatter lists creation work with SWIOTLB backend.
        drm/i915: Restore fences after resume and GPU resets
      1a506e47
  7. 26 Jun, 2013 7 commits