- 11 Sep, 2022 6 commits
-
-
Daniel Xu authored
Add a simple extension to the existing selftest to write to nf_conn:mark. Also add a failure test for writing to unsupported field. Signed-off-by:
Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/r/f78966b81b9349d2b8ebb4cee2caf15cb6b38ee2.1662568410.git.dxu@dxuuu.xyzSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Xu authored
Support direct writes to nf_conn:mark from TC and XDP prog types. This is useful when applications want to store per-connection metadata. This is also particularly useful for applications that run both bpf and iptables/nftables because the latter can trivially access this metadata. One example use case would be if a bpf prog is responsible for advanced packet classification and iptables/nftables is later used for routing due to pre-existing/legacy code. Signed-off-by:
-
Daniel Xu authored
These symbols will be used in nf_conntrack.ko to support direct writes to `nf_conn`. Signed-off-by:
-
Daniel Xu authored
Returning a bpf_reg_type only makes sense in the context of a BPF_READ. For writes, prefer to explicitly return 0 for clarity. Note that is non-functional change as it just so happened that NOT_INIT == 0. Signed-off-by:
-
Daniel Xu authored
Add corresponding unimplemented stub for when CONFIG_BPF_SYSCALL=n Signed-off-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/4021398e884433b1fef57a4d28361bb9fcf1bd05.1662568410.git.dxu@dxuuu.xyzSigned-off-by:
-
Daniel Xu authored
Since commit 27ae7997 ("bpf: Introduce BPF_PROG_TYPE_STRUCT_OPS") there has existed bpf_verifier_ops:btf_struct_access. When btf_struct_access is _unset_ for a prog type, the verifier runs the default implementation, which is to enforce read only: if (env->ops->btf_struct_access) { [...] } else { if (atype != BPF_READ) { verbose(env, "only read is supported\n"); return -EACCES; } [...] } When btf_struct_access is _set_, the expectation is that btf_struct_access has full control over accesses, including if writes are allowed. Rather than carve out an exception for each prog type that may write to BTF ptrs, delete the redundant check and give full control to btf_struct_access. Signed-off-by:
-
- 10 Sep, 2022 2 commits
-
-
Punit Agrawal authored
In the percpu freelist code, it is a common pattern to iterate over the possible CPUs mask starting with the current CPU. The pattern is implemented using a hand rolled while loop with the loop variable increment being open-coded. Simplify the code by using for_each_cpu_wrap() helper to iterate over the possible cpus starting with the current CPU. As a result, some of the special-casing in the loop also gets simplified. No functional change intended. Signed-off-by:
Punit Agrawal <punit.agrawal@bytedance.com> Acked-by:
Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20220907155746.1750329-1-punit.agrawal@bytedance.comSigned-off-by:
-
Tetsuo Handa authored
syzbot is reporting ODEBUG bug in htab_map_alloc() [1], for commit 86fe28f7 ("bpf: Optimize element count in non-preallocated hash map.") added percpu_counter_init() to htab_map_alloc() but forgot to add percpu_counter_destroy() to the error path. Link: https://syzkaller.appspot.com/bug?extid=5d1da78b375c3b5e6c2b [1] Reported-by:
syzbot <syzbot+5d1da78b375c3b5e6c2b@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 86fe28f7 ("bpf: Optimize element count in non-preallocated hash map.") Reviewed-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/e2e4cc0e-9d36-4ca1-9bfa-ce23e6f8310b@I-love.SAKURA.ne.jpSigned-off-by:
-
- 09 Sep, 2022 5 commits
-
-
Martin KaFai Lau authored
YiFei Zhu says: ==================== Usually when a TCP/UDP connection is initiated, we can bind the socket to a specific IP attached to an interface in a cgroup/connect hook. But for pings, this is impossible, as the hook is not being called. This series adds the invocation for cgroup/connect{4,6} programs to unprivileged ICMP ping (i.e. ping sockets created with SOCK_DGRAM IPPROTO_ICMP(V6) as opposed to SOCK_RAW). This also adds a test to verify that the hooks are being called and invoking bpf_bind() from within the hook actually binds the socket. Patch 1 adds the invocation of the hook. Patch 2 deduplicates write_sysctl in BPF test_progs. Patch 3 adds the tests for this hook. v1 -> v2: * Added static to bindaddr_v6 in prog_tests/connect_ping.c * Deduplicated much of the test logic in prog_tests/connect_ping.c * Deduplicated write_sysctl() to test_progs.c v2 -> v3: * Renamed variable "obj" to "skel" for the BPF skeleton object in prog_tests/connect_ping.c v3 -> v4: * Fixed error path to destroy skel in prog_tests/connect_ping.c ==================== Signed-off-by:Martin KaFai Lau <martin.lau@kernel.org>
-
YiFei Zhu authored
This tests that when an unprivileged ICMP ping socket connects, the hooks are actually invoked. We also ensure that if the hook does not call bpf_bind(), the bound address is unmodified, and if the hook calls bpf_bind(), the bound address is exactly what we provided to the helper. A new netns is used to enable ping_group_range in the test without affecting ouside of the test, because by default, not even root is permitted to use unprivileged ICMP ping... Signed-off-by:
YiFei Zhu <zhuyifei@google.com> Link: https://lore.kernel.org/r/086b227c1b97f4e94193e58aae7576d0261b68a4.1662682323.git.zhuyifei@google.comSigned-off-by:
-
YiFei Zhu authored
This helper is needed in multiple tests. Instead of copying it over and over, better to deduplicate this helper to test_progs.c. test_progs.c is chosen over testing_helpers.c because of this helper's use of CHECK / ASSERT_*, and the CHECK was modified to use ASSERT_* so it does not rely on a duration variable. Suggested-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
YiFei Zhu authored
Usually when a TCP/UDP connection is initiated, we can bind the socket to a specific IP attached to an interface in a cgroup/connect hook. But for pings, this is impossible, as the hook is not being called. This adds the hook invocation to unprivileged ICMP ping (i.e. ping sockets created with SOCK_DGRAM IPPROTO_ICMP(V6) as opposed to SOCK_RAW. Logic is mirrored from UDP sockets where the hook is invoked during pre_connect, after a check for suficiently sized addr_len. Signed-off-by:
-
Daniel Borkmann authored
This reverts commit 14e5ce79 ("libbpf: Add GCC support for bpf_tail_call_static"). Reason is that gcc invented their own BPF asm which is not conform with LLVM one, and going forward this would be more painful to maintain here and in other areas of the library. Thus remove it; ask to gcc folks is to align with LLVM one to use exact same syntax. Fixes: 14e5ce79 ("libbpf: Add GCC support for bpf_tail_call_static") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: James Hilliard <james.hilliard1@gmail.com> Cc: Jose E. Marchesi <jose.marchesi@oracle.com>
-
- 07 Sep, 2022 23 commits
-
-
Kumar Kartikeya Dwivedi authored
For a lot of use cases in future patches, we will want to modify the state of registers part of some same 'group' (e.g. same ref_obj_id). It won't just be limited to releasing reference state, but setting a type flag dynamically based on certain actions, etc. Hence, we need a way to easily pass a callback to the function that iterates over all registers in current bpf_verifier_state in all frames upto (and including) the curframe. While in C++ we would be able to easily use a lambda to pass state and the callback together, sadly we aren't using C++ in the kernel. The next best thing to avoid defining a function for each case seems like statement expressions in GNU C. The kernel already uses them heavily, hence they can passed to the macro in the style of a lambda. The statement expression will then be substituted in the for loop bodies. Variables __state and __reg are set to current bpf_func_state and reg for each invocation of the expression inside the passed in verifier state. Then, convert mark_ptr_or_null_regs, clear_all_pkt_pointers, release_reference, find_good_pkt_pointers, find_equal_scalars to use bpf_for_each_reg_in_vstate. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
We need this helper to skip over special fields (bpf_spin_lock, bpf_timer, kptrs) while zeroing a map value. Use the same logic as copy_map_value but memset instead of memcpy. Currently, the code zeroing map value memory does not have to deal with special fields, hence this is a prerequisite for introducing such support. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
Enable support for kptrs in percpu BPF arraymap by wiring up the freeing of these kptrs from percpu map elements. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
bpf_long_memcpy is used while copying to remote percpu regions from BPF syscall and helpers, so that the copy is atomic at word size granularity. This might not be possible when you copy from map value hosting kptrs from or to percpu maps, as the alignment or size in disjoint regions may not be multiple of word size. Hence, to avoid complicating the copy loop, we only use bpf_long_memcpy when special fields are not present, otherwise use normal memcpy to copy the disjoint regions. Signed-off-by:
-
Jules Irenge authored
Sparse reported a warning at bpf_map_free_kptrs() "warning: Using plain integer as NULL pointer" During the process of fixing this warning, it was discovered that the current code erroneously writes to the pointer variable instead of deferencing and writing to the actual kptr. Hence, Sparse tool accidentally helped to uncover this problem. Fix this by doing WRITE_ONCE(*p, 0) instead of WRITE_ONCE(p, 0). Note that the effect of this bug is that unreferenced kptrs will not be cleared during check_and_free_fields. It is not a problem if the clearing is not done during map_free stage, as there is nothing to free for them. Fixes: 14a324f6 ("bpf: Wire up freeing of referenced kptr") Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Link: https://lore.kernel.org/r/Yxi3pJaK6UDjVJSy@playgroundSigned-off-by:
-
Alexei Starovoitov authored
Benjamin Tissoires says: ==================== Hi, well, given that the HID changes haven't moved a lot in the past revisions and that I am cc-ing a bunch of people, I have dropped them while we focus on the last 2 requirements in bpf-core changes. I'll submit a HID targeted series when we get these in tree, which would make things a lore more independent. For reference, the whole reasons for these 2 main changes are at https://lore.kernel.org/bpf/20220902132938.2409206-1-benjamin.tissoires@redhat.com/ Compared to v10 (in addition of dropping the HID changes), I have changed the selftests so we can test both light skeletons and libbbpf calls. Cheers, Benjamin ==================== Signed-off-by:
-
Benjamin Tissoires authored
We add 2 new kfuncs that are following the RET_PTR_TO_MEM capability from the previous commit. Then we test them in selftests: the first tests are testing valid case, and are not failing, and the later ones are actually preventing the program to be loaded because they are wrong. To work around that, we mark the failing ones as not autoloaded (with SEC("?tc")), and we manually enable them one by one, ensuring the verifier rejects them. Signed-off-by:Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20220906151303.2780789-8-benjamin.tissoires@redhat.comSigned-off-by:
-
Benjamin Tissoires authored
For drivers (outside of network), the incoming data is not statically defined in a struct. Most of the time the data buffer is kzalloc-ed and thus we can not rely on eBPF and BTF to explore the data. This commit allows to return an arbitrary memory, previously allocated by the driver. An interesting extra point is that the kfunc can mark the exported memory region as read only or read/write. So, when a kfunc is not returning a pointer to a struct but to a plain type, we can consider it is a valid allocated memory assuming that: - one of the arguments is either called rdonly_buf_size or rdwr_buf_size - and this argument is a const from the caller point of view We can then use this parameter as the size of the allocated memory. The memory is either read-only or read-write based on the name of the size parameter. Acked-by:
-
Benjamin Tissoires authored
net/bpf/test_run.c is already presenting 20 kfuncs. net/netfilter/nf_conntrack_bpf.c is also presenting an extra 10 kfuncs. Given that all the kfuncs are regrouped into one unique set, having only 2 space left prevent us to add more selftests. Bump it to 256. Signed-off-by:
-
Benjamin Tissoires authored
We need to also export the kfunc set to the syscall program type, and then add a couple of eBPF programs that are testing those calls. The first one checks for valid access, and the second one is OK from a static analysis point of view but fails at run time because we are trying to access outside of the allocated memory. Signed-off-by:
-
Benjamin Tissoires authored
When a function was trying to access data from context in a syscall eBPF program, the verifier was rejecting the call unless it was accessing the first element. This is because the syscall context is not known at compile time, and so we need to check this when actually accessing it. Check for the valid memory access if there is no convert_ctx callback, and allow such situation to happen. Acked-by:
-
Benjamin Tissoires authored
btf_check_subprog_arg_match() was used twice in verifier.c: - when checking for the type mismatches between a (sub)prog declaration and BTF - when checking the call of a subprog to see if the provided arguments are correct and valid This is problematic when we check if the first argument of a program (pointer to ctx) is correctly accessed: To be able to ensure we access a valid memory in the ctx, the verifier assumes the pointer to context is not null. This has the side effect of marking the program accessing the entire context, even if the context is never dereferenced. For example, by checking the context access with the current code, the following eBPF program would fail with -EINVAL if the ctx is set to null from the userspace: ``` SEC("syscall") int prog(struct my_ctx *args) { return 0; } ``` In that particular case, we do not want to actually check that the memory is correct while checking for the BTF validity, but we just want to ensure that the (sub)prog definition matches the BTF we have. So split btf_check_subprog_arg_match() in two so we can actually check for the memory used when in a call, and ignore that part when not. Note that a further patch is in preparation to disentangled btf_check_func_arg_match() from these two purposes, and so right now we just add a new hack around that by adding a boolean to this function. Signed-off-by: -
Benjamin Tissoires authored
Similar to tools/testing/selftests/bpf/prog_tests/dynptr.c: we declare an array of tests that we run one by one in a for loop. Followup patches will add more similar-ish tests, so avoid a lot of copy paste by grouping the declaration in an array. For light skeletons, we have to rely on the offsetof() macro so we can statically declare which program we are using. In the libbpf case, we can rely on bpf_object__find_program_by_name(). So also change the Makefile to generate both light skeletons and normal ones. Signed-off-by:
-
Alexei Starovoitov authored
Yonghong Song says: ==================== Currently struct arguments are not supported for trampoline based progs. One of major reason is that struct argument may pass by value which may use more than one registers. This breaks trampoline progs where each argument is assumed to take one register. bcc community reported the issue ([1]) where struct argument is not supported for fentry program. typedef struct { uid_t val; } kuid_t; typedef struct { gid_t val; } kgid_t; int security_path_chown(struct path *path, kuid_t uid, kgid_t gid); Inside Meta, we also have a use case to attach to tcp_setsockopt() typedef struct { union { void *kernel; void __user *user; }; bool is_kernel : 1; } sockptr_t; int tcp_setsockopt(struct sock *sk, int level, int optname, sockptr_t optval, unsigned int optlen); This patch added struct value support for bpf tracing programs which uses trampoline. Only <= 16 byte struct size is supported for now which covers use cases in the above. For x86/arm64/bpf, <= 16 struct value will be passed in registers instead of by reference. Only x86_64 is supported in this patch. arm64 support can be added later. [1] https://github.com/iovisor/bcc/issues/3657 Changelog: v3 -> v4: - fix a test failure where no casting for bpf_get_func_arg() value as the value type is 'int'. - add tracing_struct test in DENYLIST.s390x - simplify macro BPF_REG_CNT for BPF_PROG2. v2 -> v3: - previously struct arguments (<= 16 bytes) are passed by reference for bpf programs. Suggested by Alexei, it is passed by value now. - in order to support passing <= 16 struct value, a new macro BPF_PROG2 is invented. rfc v1 -> v2: - changed bpf_func_model struct info fields to arg_flags[] to make it easy to iterate arguments in arch specific {save|restore}_regs() functions. - added fexit tests to test return values with struct arguments. ==================== Signed-off-by: -
Yonghong Song authored
Add tracing_struct test in DENYLIST.s390x since s390x does not support trampoline now. Signed-off-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20220831152723.2081551-1-yhs@fb.comSigned-off-by:
-
Yonghong Song authored
Use BPF_PROG2 instead of BPF_PROG for programs in progs/timer.c to test BPF_PROG2 for cases without struct arguments. Signed-off-by:
-
Yonghong Song authored
Add various struct argument tests with fentry/fexit programs. Also add one test with a kernel func which does not have any argument to test BPF_PROG2 macro in such situation. Signed-off-by:
-
Yonghong Song authored
To support struct arguments in trampoline based programs, existing BPF_PROG doesn't work any more since the type size is needed to find whether a parameter takes one or two registers. So this patch added a new BPF_PROG2 macro to support such trampoline programs. The idea is suggested by Andrii. For example, if the to-be-traced function has signature like typedef struct { void *x; int t; } sockptr; int blah(sockptr x, char y); In the new BPF_PROG2 macro, the argument can be represented as __bpf_prog_call( ({ union { struct { __u64 x, y; } ___z; sockptr x; } ___tmp = { .___z = { ctx[0], ctx[1] }}; ___tmp.x; }), ({ union { struct { __u8 x; } ___z; char y; } ___tmp = { .___z = { ctx[2] }}; ___tmp.y; })); In the above, the values stored on the stack are properly assigned to the actual argument type value by using 'union' magic. Note that the macro also works even if no arguments are with struct types. Note that new BPF_PROG2 works for both llvm16 and pre-llvm16 compilers where llvm16 supports bpf target passing value with struct up to 16 byte size and pre-llvm16 will pass by reference by storing values on the stack. With static functions with struct argument as always inline, the compiler is able to optimize and remove additional stack saving of struct values. Signed-off-by: -
Yonghong Song authored
ARM64 does not support struct argument for trampoline based bpf programs yet. Signed-off-by:
-
Yonghong Song authored
Now instead of the number of arguments, the number of registers holding argument values are stored in trampoline. Update the description of bpf_get_func_arg[_cnt]() helpers. Previous programs without struct arguments should continue to work as usual. Signed-off-by:
-
Yonghong Song authored
In C, struct value can be passed as a function argument. For small structs, struct value may be passed in one or more registers. For trampoline based bpf programs, this would cause complication since one-to-one mapping between function argument and arch argument register is not valid any more. The latest llvm16 added bpf support to pass by values for struct up to 16 bytes ([1]). This is also true for x86_64 architecture where two registers will hold the struct value if the struct size is >8 and <= 16. This may not be true if one of struct member is 'double' type but in current linux source code we don't have such instance yet, so we assume all >8 && <= 16 struct holds two general purpose argument registers. Also change on-stack nr_args value to the number of registers holding the arguments. This will permit bpf_get_func_arg() helper to get all argument values. [1] https://reviews.llvm.org/D132144Signed-off-by:
-
Yonghong Song authored
Allow struct argument in trampoline based programs where the struct size should be <= 16 bytes. In such cases, the argument will be put into up to 2 registers for bpf, x86_64 and arm64 architectures. To support arch-specific trampoline manipulation, add arg_flags for additional struct information about arguments in btf_func_model. Such information will be used in arch specific function arch_prepare_bpf_trampoline() to prepare argument access properly in trampoline. Signed-off-by:
-
Alexei Starovoitov authored
__ksize() was made private. Use ksize() instead. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 06 Sep, 2022 4 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextPaolo Abeni authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-09-05 The following pull-request contains BPF updates for your *net-next* tree. We've added 106 non-merge commits during the last 18 day(s) which contain a total of 159 files changed, 5225 insertions(+), 1358 deletions(-). There are two small merge conflicts, resolve them as follows: 1) tools/testing/selftests/bpf/DENYLIST.s390x Commit 27e23836 ("selftests/bpf: Add lru_bug to s390x deny list") in bpf tree was needed to get BPF CI green on s390x, but it conflicted with newly added tests on bpf-next. Resolve by adding both hunks, result: [...] lru_bug # prog 'printk': failed to auto-attach: -524 setget_sockopt # attach unexpected error: -524 (trampoline) cb_refs # expected error message unexpected error: -524 (trampoline) cgroup_hierarchical_stats # JIT does not support calling kernel function (kfunc) htab_update # failed to attach: ERROR: strerror_r(-524)=22 (trampoline) [...] 2) net/core/filter.c Commit 1227c177 ("net: Fix data-races around sysctl_[rw]mem_(max|default).") from net tree conflicts with commit 29003875 ("bpf: Change bpf_setsockopt(SOL_SOCKET) to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from bpf-next tree, result: [...] if (getopt) { if (optname == SO_BINDTODEVICE) return -EINVAL; return sk_getsockopt(sk, SOL_SOCKET, optname, KERNEL_SOCKPTR(optval), KERNEL_SOCKPTR(optlen)); } return sk_setsockopt(sk, SOL_SOCKET, optname, KERNEL_SOCKPTR(optval), *optlen); [...] The main changes are: 1) Add any-context BPF specific memory allocator which is useful in particular for BPF tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov. 2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort to reuse the existing core socket code as much as possible, from Martin KaFai Lau. 3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani. 4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo. 5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF integration with the rstat framework, from Yosry Ahmed. 6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev. 7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao. 8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF backend, from James Hilliard. 9) Fix verifier helper permissions and reference state management for synchronous callbacks, from Kumar Kartikeya Dwivedi. 10) Add support for BPF selftest's xskxceiver to also be used against real devices that support MAC loopback, from Maciej Fijalkowski. 11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet. 12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu. 13) Various minor misc improvements all over the place. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits) bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc. bpf: Remove usage of kmem_cache from bpf_mem_cache. bpf: Remove prealloc-only restriction for sleepable bpf programs. bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs. bpf: Remove tracing program restriction on map types bpf: Convert percpu hash map to per-cpu bpf_mem_alloc. bpf: Add percpu allocation support to bpf_mem_alloc. bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU. bpf: Adjust low/high watermarks in bpf_mem_cache bpf: Optimize call_rcu in non-preallocated hash map. bpf: Optimize element count in non-preallocated hash map. bpf: Relax the requirement to use preallocated hash maps in tracing progs. samples/bpf: Reduce syscall overhead in map_perf_test. selftests/bpf: Improve test coverage of test_maps bpf: Convert hash map to bpf_mem_alloc. bpf: Introduce any context BPF specific memory allocator. selftest/bpf: Add test for bpf_getsockopt() bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt() bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt() bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt() ... ==================== Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.netSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Sergei Antonov authored
Sparse checker found two endianness-related issues: .../moxart_ether.c:34:15: warning: incorrect type in assignment (different base types) .../moxart_ether.c:34:15: expected unsigned int [usertype] .../moxart_ether.c:34:15: got restricted __le32 [usertype] .../moxart_ether.c:39:16: warning: cast to restricted __le32 Fix them by using __le32 type instead of u32. Signed-off-by:
Sergei Antonov <saproj@gmail.com> Link: https://lore.kernel.org/r/20220902125037.1480268-1-saproj@gmail.comSigned-off-by:
-
Sergei Antonov authored
Sparse found a number of endianness-related issues of these kinds: .../ftmac100.c:192:32: warning: restricted __le32 degrades to integer .../ftmac100.c:208:23: warning: incorrect type in assignment (different base types) .../ftmac100.c:208:23: expected unsigned int rxdes0 .../ftmac100.c:208:23: got restricted __le32 [usertype] .../ftmac100.c:249:23: warning: invalid assignment: &= .../ftmac100.c:249:23: left side has type unsigned int .../ftmac100.c:249:23: right side has type restricted __le32 .../ftmac100.c:527:16: warning: cast to restricted __le32 Change type of some fields from 'unsigned int' to '__le32' to fix it. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220902113749.1408562-1-saproj@gmail.comSigned-off-by:
-
Horatiu Vultur authored
Extend lan966x with RGMII support. The MAC supports all RGMII_* modes. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220902111548.614525-1-horatiu.vultur@microchip.comSigned-off-by:
-
