- 12 Oct, 2023 21 commits
-
-
Jacopo Mondi authored
All the properties described by video-interface-devices.yaml are allowed for the image sensor, make them accepted by changing "additionalProperties: false" to "unevaluatedProperties: false" at the schema top-level. Because all properties are now accepted, there is no need to explicitly allow them in the schema. Signed-off-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Jacopo Mondi authored
All the properties described by video-interface-devices.yaml are allowed for the image sensor, make them accepted by changing "additionalProperties: false" to "unevaluatedProperties: false" at the schema top-level. Signed-off-by:
-
Jacopo Mondi authored
There is no reason to restrict the allowed rotation degrees to 0 and 180, as the sensor can be mounted with any rotation. Also, as all the properties described by video-interface-devices.yaml are allowed for the image sensor, make them accepted by changing "additionalProperties: false" to "unevaluatedProperties: false" at the schema top-level. Signed-off-by:
-
Jacopo Mondi authored
All the properties described by video-interface-devices.yaml are allowed for the image sensor, make them accepted by changing "additionalProperties: false" to "unevaluatedProperties: false" at the schema top-level. Signed-off-by:
-
Jacopo Mondi authored
There is no reason to restrict the allowed rotation degrees to 0 and 180, as the sensor can be mounted with any rotation. Also, as all the properties described by video-interface-devices.yaml are allowed for the image sensor, make them accepted by changing "additionalProperties: false" to "unevaluatedProperties: false" at the schema top-level. Signed-off-by:
-
Jacopo Mondi authored
Allow properties from video-interface-devices.yaml for the SK Hynix Hi-846 sensor. All properties specified in video-interface-devices.yaml schema are valid, so make them accepted by changing "additionalProperties: false" to "unevaluatedProperties: false" at the schema top-level. Add two properties from video-interface-devices.yaml to the example to validate the new schema. Signed-off-by:
-
Jai Luthra authored
TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate capture over a CSI-2 bus. The Cadence CSI2RX IP acts as a bridge between the TI specific parts and the CSI-2 protocol parts. TI then has a wrapper on top of this bridge called the SHIM layer. It takes in data from stream 0, repacks it, and sends it to memory over PSI-L DMA. This driver acts as the "front end" to V4L2 client applications. It implements the required ioctls and buffer operations, passes the necessary calls on to the bridge, programs the SHIM layer, and performs DMA via the dmaengine API to finally return the data to a buffer supplied by the application. Co-developed-by:
Pratyush Yadav <p.yadav@ti.com> Signed-off-by:
Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by:
Julien Massot <julien.massot@collabora.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by:
Jai Luthra <j-luthra@ti.com> Signed-off-by:
-
Pratyush Yadav authored
TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the parts together. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Pratyush Yadav authored
Add media link validation to make sure incorrectly configured pipelines are caught. Signed-off-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Pratyush Yadav authored
The devnode can be used by media-ctl and other userspace tools to perform configurations on the subdev. Without it, media-ctl returns ENOENT when setting format on the sensor subdev. Signed-off-by:
-
Pratyush Yadav authored
Firstly, there is no VC_EN bit present in the STREAM_DATA_CFG register. Bit 31 is part of the VL_SELECT field. Remove it completely. Secondly, it makes little sense to enable ith virtual channel for ith stream. Sure, there might be a use-case that demands it. But there might also be a use case that demands all streams to use the 0th virtual channel. Prefer this case over the former because it is less arbitrary and also makes it very clear what the limitations of the current driver is instead of giving a false impression that multiple virtual channels are supported. Signed-off-by:
-
Pratyush Yadav authored
The stream stop procedure says that the STOP bit should be set when the stream is to be stopped, and then the ready bit in stream status register polled to make sure the STOP operation is finished. Signed-off-by:
-
Pratyush Yadav authored
This resets the stream state machines and FIFOs, giving them a clean slate. On J721E if the streams are not reset before starting the capture, the captured frame gets wrapped around vertically on every run after the first. Signed-off-by:
-
Pratyush Yadav authored
Some platforms like TI's J721E can have the CSI2RX paired with an external DPHY. Use the generic PHY framework to configure the DPHY with the correct link frequency. Signed-off-by:
-
Pratyush Yadav authored
The format is needed to calculate the link speed for the external DPHY configuration. It is not right to query the format from the source subdev. Add get_fmt and set_fmt pad operations so that the format can be configured and correct bpp be selected. Initialize and use the v4l2 subdev active state to keep track of the active formats. Also propagate the new format from the sink pad to all the source pads. Signed-off-by:
-
Pratyush Yadav authored
Call media_entity_cleanup() in probe error path and remove to make sure the media entity is cleaned up properly. Suggested-by:
-
Pratyush Yadav authored
The notifier is added to the global notifier list when registered. When the module is removed, the struct csi2rx_priv in which the notifier is embedded, is destroyed. As a result the notifier list has a reference to a notifier that no longer exists. This causes invalid memory accesses when the list is iterated over. Similar for when the probe fails. Unregister and clean up the notifier to avoid this. Fixes: 1fc3b37f ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver") Signed-off-by:
-
Jai Luthra authored
Add a SoC-specific compatible string for TI's integration of this IP in J7 and AM62 line of SoCs. Tested-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Pratyush Yadav authored
The data-lanes property maps the logical lane numbers to the physical lane numbers. The position of an entry is the logical lane number and its value is the physical lane number. Since one physical lane can only map to one logical lane, no number in the list should repeat. Add the uniqueItems constraint on the property to enforce this. Signed-off-by:
-
Umang Jain authored
Correct the wrong spelling of 'exposes' in the binner section. Signed-off-by:
Umang Jain <umang.jain@ideasonboard.com> Signed-off-by:
-
Ricardo B. Marliere authored
This patch fixes the following checkpatch.pl warnings in ipu3.c: WARNING: Unnecessary ftrace-like logging - prefer using ftrace + dev_dbg(dev, "enter %s\n", __func__); WARNING: Unnecessary ftrace-like logging - prefer using ftrace + dev_dbg(dev, "leave %s\n", __func__); WARNING: Unnecessary ftrace-like logging - prefer using ftrace + dev_dbg(dev, "enter %s\n", __func__); WARNING: Unnecessary ftrace-like logging - prefer using ftrace + dev_dbg(dev, "leave %s\n", __func__); Fixes: 7fc7af64 ("media: staging/intel-ipu3: Add imgu top level pci device driver") Signed-off-by:
Ricardo B. Marliere <ricardo@marliere.net> Signed-off-by:
-
- 11 Oct, 2023 5 commits
-
-
Sean Young authored
When transmitting, infrared drivers expect an odd number of samples; iow without a trailing space. No problems have been observed so far, so this is just belt and braces. Fixes: 9b619258 ("media: lirc: implement scancode sending") Cc: stable@vger.kernel.org Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
The Sharp protocol[1] encoding has incorrect timings for bit space. [1] https://www.sbprojects.net/knowledge/ir/sharp.php Fixes: d35afc5f ("[media] rc: ir-sharp-decoder: Add encode capability") Cc: stable@vger.kernel.org Reported-by:
Joe Ferner <joe.m.ferner@gmail.com> Closes: https://sourceforge.net/p/lirc/mailman/message/38604507/Signed-off-by:
-
Hans Verkuil authored
This fixes two smatch warnings: drivers/staging/media/atomisp/pci/atomisp_cmd.c:2779 atomisp_cp_dvs_6axis_config() warn: missing unwind goto? drivers/staging/media/atomisp/pci/atomisp_cmd.c:2878 atomisp_cp_morph_table() warn: missing unwind goto? Signed-off-by:
Hans de Goede <hdegoede@redhat.com>
-
Hans Verkuil authored
Check if the format was really found. Fixes smatch warning: drivers/media/i2c/tc358746.c:790 tc358746_set_fmt() error: 'fmt' dereferencing possible ERR_PTR() Signed-off-by:
-
Hans Verkuil authored
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Also fixes a smatch warning: drivers/staging/media/atomisp/i2c/atomisp-gc0310.c:446 gc0310_s_stream() warn: missing error code 'ret' Signed-off-by:
-
- 07 Oct, 2023 14 commits
-
-
Takashi Iwai authored
imon driver probes two USB interfaces, and at the probe of the second interface, the driver assumes blindly that the first interface got bound with the same imon driver. It's usually true, but it's still possible that the first interface is bound with another driver via a malformed descriptor. Then it may lead to a memory corruption, as spotted by syzkaller; imon driver accesses the data from drvdata as struct imon_context object although it's a completely different one that was assigned by another driver. This patch adds a sanity check -- whether the first interface is really bound with the imon driver or not -- for avoiding the problem above at the probe time. Reported-by: syzbot+59875ffef5cb9c9b29e9@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000a838aa0603cc74d6@google.com/Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hans Verkuil authored
When building the modules 'modpost' warns about missing MODULE_DESCRIPTION. Since almost none of the rc keymap modules have this, it produces a lot of warnings. As a first step to fixing all media modules, add this line to all keymaps. The description should be a human-readable string describing the remote or the remote controller that the keymap can be used with. Note that keymaps/rc-cec.c is actually compiled into the rc-core, so that is the sole keymap source that didn't need this. Signed-off-by:
-
Sakari Ailus authored
Split camera sensor documentation into user and kernel portions. This should make it easier for the user space developers to find the relevant documentation. Also add a list of exemplary drivers and add imx219 driver to it, besides those that were already mentioned. Signed-off-by:
-
Sakari Ailus authored
Add a definition for MIPI CSI-2 generic long packet types. The generic long packet types are numbered from 1 to 4. Signed-off-by:
-
Sakari Ailus authored
Check the validity of pad flags on entity init. Exactly one of the flags must be set. Signed-off-by:
-
Sakari Ailus authored
Print debug level information on returned frame descriptors. Signed-off-by:
-
Sakari Ailus authored
Clear frame descriptor before calling transmitter's get_frame_desc() op. Also remove the corresponding memset() calls from drivers. Signed-off-by:
-
Sakari Ailus authored
With ipu bridge, endpoints may only be created when ipu bridge has initialised. This may happen after the sensor driver has first probed. Signed-off-by:
-
Sakari Ailus authored
Use sub-device active state. Rely on control handler lock to serialise access to the active state. Also clean up locking on s_stream handler. Signed-off-by:
-
Sakari Ailus authored
Enable runtime PM before registering the async subdev as the driver UAPI may become accessible immediately after the registration. Runtime PM needs to be enabled by that time. Signed-off-by:
-
Sakari Ailus authored
The s_stream is called to enable and to disable streaming on a sub-device. The caller may only call it to change the state, enabling streaming is not allowed when it is already disabled, and similarly for disabling streaming. Remove the check from the CCS driver. Signed-off-by:
-
Sakari Ailus authored
ccs_pm_get_init() depends on the return values > 0 of pm_runtime_get_sync(), thus it can't use pm_runtime_resume_and_get(). There's even a comment in the driver on this, a few lines above the code. Fixes: aa0adb399d09 ("media: i2c: Use pm_runtime_resume_and_get()") Signed-off-by: -
Sakari Ailus authored
Make use of sub-device active state. In most cases the effect on need for acquiring the mutex is non-existent as access to the driver's core data structure still needs to be serialised. This still removes a lot of code as the code paths for active and try state are the same in many cases. Signed-off-by:
-
Sakari Ailus authored
The available mbus codes will soon be needed earlier, at the time sub-devices are initialisaed. This is due to calling init_cfg() op via the v4l2_subdev_init_finalize(). Move ccs_get_mbus_formats() before ccs_init_subdev() calls. Signed-off-by:
-
