Add an ioctl which allows users to create blob properties from supplied
data. Currently this only supports modes, creating a drm_display_mode from
the userspace drm_mode_modeinfo.

v2: Removed size/type checks.
    Rebased on new patches to allow error propagation from create_blob,
    as well as avoiding double-allocation.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Change drm_property_create_blob to return an ERR_PTR-encoded error on
failure, so we can pass the failure reason down.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@intel.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Make the data parameter to drm_property_create_blob optional; if
omitted, the copy will be skipped and the data will be empty.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Move the drm_display_mode <-> drm_mode_modeinfo conversion functions
from drm_crtc.c to drm_modes.c, and make them non-static so that others
can use them.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The only user of convert_umode was also performing mode validation, so
do that in the same place.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Rather than open-coding our own CRTC state helpers, use the atomic helpers
added in f5e7840b, and make our freeing behaviour consistent as well.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Change '@param foo' to '@foo:' to fit kerneldoc style.

672cb1d6ae mistakenly added an extra parameter to the kerneldoc for
drm_property_unreference_blob which wasn't actually present.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Add DOC sections giving an overview of drm_bridge and how to fill up the
drm_bridge_funcs ops. Add these to drm.tpml in DocBook.

Add headerdocs for funcs in drm_bridge.c that don't have them yet.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
[danvet: Amend kerneldoc as discussed with Archit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Allow drm_bridge objects to link to each other in order to form an encoder
chain. The requirement for creating a chain of bridges comes because the
MSM drm driver uses up its encoder and bridge objects for blocks within
the SoC itself. There isn't anything left to use if the SoC display output
is connected to an external encoder IC. Having an additional bridge
connected to the existing bridge helps here. In general, it is possible for
platforms to have  multiple devices between the encoder and the
connector/panel that require some sort of configuration.

We create drm bridge helper functions corresponding to each op in
'drm_bridge_funcs'. These helpers call the corresponding
'drm_bridge_funcs' op for the entire chain of bridges. These helpers are
used internally by drm_atomic_helper.c and drm_crtc_helper.c.

The drm_bridge_enable/pre_enable helpers execute enable/pre_enable ops of
the bridge closet to the encoder, and proceed until the last bridge in the
chain is enabled. The same holds for drm_bridge_mode_set/mode_fixup
helpers. The drm_bridge_disable/post_disable helpers disable the last
bridge in the chain first, and proceed until the first bridge in the chain
is disabled.

drm_bridge_attach() remains the same. As before, the driver calling this
function should make sure it has set the links correctly. The order in
which the bridges are connected to each other determines the order in which
the calls are made. One requirement is that every bridge in the chain
should point the parent encoder object. This is required since bridge
drivers expect a valid encoder pointer in drm_bridge. For example, consider
a chain where an encoder's output is connected to bridge1, and bridge1's
output is connected to bridge2:

	/* Like before, attach bridge to an encoder */
	bridge1->encoder = encoder;
	ret = drm_bridge_attach(dev, bridge1);
	..

	/*
	 * set the first bridge's 'next' bridge to bridge2, set its encoder
	 * as bridge1's encoder
	 */
	bridge1->next = bridge2
	bridge2->encoder = bridge1->encoder;
	ret = drm_bridge_attach(dev, bridge2);

	...
	...

This method of bridge chaining isn't intrusive and existing drivers that
use drm_bridge will behave the same way as before. The bridge helpers also
cleans up the atomic and crtc helper files a bit.
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Drivers may need to recalculate plane state when a modeset occurs,
not reliably adding them might cause hard to debug bugs.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This is a convenience function to add all planes for a crtc,
similar to add_affected_connectors. This will be used in
drm_atomic_helper_check_modeset, but drivers can call it too
when they need to recalculate all state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Amend kerneldoc a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm_atomic_helper_commit_planes calls all atomic_begin's first,
then updates all planes, finally calling atomic_flush.

Some drivers may want to things like disabling irq's
from their atomic_begin, in which case a second call to atomic_begin
will splat. By using commit_planes_on_crtc on each crtc in the
atomic state they'll evade that issue.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Extend kerneldoc a bit as discussed with Maarten on irc.]
[danvet: Squash in fixup to check for crtc_funcs in all places.
Reported by Dan Carpenter.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We picked up a silent conflict in amdkfd with drm-fixes and drm-next,
backmerge v4.1-rc5 and fix the conflicts
Signed-off-by: Dave Airlie <airlied@redhat.com>

Conflicts:
	drivers/gpu/drm/drm_irq.c

- Add the interrupts & events modules, including new IOCTLs to create and wait
  on events. The HSA RT open source stack is mainly using events to know when
  a dispatched work has been completed. In addition, this module is
  a pre-requisite for the next module I'm going to upstream - debugger support

  This module also handles H/W exceptions, such as memory exception received
  through the IOMMUv2 H/W and Bad Opcode exception receieved from the GPU.

- Adding a new kernel module parameter to let the user decide whether he wants
  to receive a SIGTERM when a memory exception occurs inside the GPU kernel and
  the HSA application doesn't wait on an appropriate event, or if he just want
  to receive notification about this event in dmesg. The default is the latter.

- Additional improvements for SDMA code

- Update my email address in Maintainers file.

* tag 'drm-amdkfd-next-2015-05-19' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: change driver version to 0.7.2
  drm/amdkfd: Implement events IOCTLs
  drm/amdkfd: Add module parameter of send_sigterm
  drm/amdkfd: Add bad opcode exception handling
  drm/amdkfd: Add memory exception handling
  drm/amdkfd: Add the events module
  drm/amdkfd: add events IOCTL set definitions
  drm/amdkfd: Add interrupt handling module
  drm/radeon: Add init interrupt kfd->kgd interface
  MAINTAINERS: update amdkfd Oded's email address
  drm/amdkfd: make the sdma vm init to be asic specific
  drm/amdkfd: Use new struct for asic specific ops
  drm/amdkfd: reformat some debug prints
  drm/amdkfd: Remove unessary void pointer cast

Scattering of random drm core patches. Bunch of atomic prep work too, but
the final bits for blob properties, atomic modesets and lifting the
experimental tag on the atomic ioctl are still blocked on Daniel Stone
finalizing and testing the weston support for it. I hope that we can get
it all ready for 4.2 though.

* tag 'topic/drm-misc-2015-05-19' of git://anongit.freedesktop.org/drm-intel: (22 commits)
  drm/atomic: Allow drivers to subclass drm_atomic_state, v3
  drm/atomic: remove duplicated assignment of old_plane_state
  drm/dp: Fix comment in DP helper
  drm/atomic: add drm_atomic_get_existing_*_state helpers
  drm/core: get rid of -Iinclude/drm
  drm/i915: get rid of -Iinclude/drm
  drm/atomic-helpers: Export drm_atomic_helper_update_legacy_modeset_state
  drm/atomic-helpers: Update vblank timestamping constants
  drm/sysfs: remove unnecessary connector type checks
  drm/sysfs: split DVI-I and TV-out attributes
  drm/sysfs: make optional attribute groups per connector type
  drm/sysfs: add a helper for extracting connector type from kobject
  drm/edid: Add CEA modes before inferred modes
  drm/prime: Allow internal imports without import_sg_table
  drm: Add reference counting to blob properties
  drm: Introduce blob_lock
  drm: Introduce helper for replacing blob properties
  drm: Don't leak path blob property when updating
  drm/atomic: Don't open-code CRTC state destroy
  drm/edid: Add DMT modes with ID > 0x50
  ...

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch adds a new kernel module parameter to amdkfd,
called send_sigterm.

This parameter specifies whether amdkfd should send the
SIGTERM signal to an HSA process, when the following conditions
occur:

1. The GPU triggers an exception regarding a kernel that was
   issued by this process.

2. The HSA process isn't waiting on an event that handles
   this exception.

The default behavior is not to send a SIGTERM and suffice
with a dmesg error print.
Reviewed-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

Signed-off-by: Alexey Skidanov <alexey.skidanov@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch adds Peripheral Page Request (PPR) failure processing
and reporting.

Bad address or pointer to a system memory block with inappropriate
read/write permission cause such PPR failure during a user queue
processing. PPR request handling is done by IOMMU driver notifying
AMDKFD module on PPR failure.

The process triggering a PPR failure will be notified by
appropriate event or SIGTERM signal will be sent to it.

v3:
- Change all bool fields in struct kfd_memory_exception_failure to
  uint32_t
Signed-off-by: Alexey Skidanov <alexey.skidanov@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch adds the events module (kfd_events.c) and the interrupt
handle module for Kaveri (cik_event_interrupt.c).

The patch updates the interrupt_is_wanted(), so that it now calls the
interrupt isr function specific for the device that received the
interrupt. That function(implemented in cik_event_interrupt.c)
returns whether this interrupt is of interest to us or not.

The patch also updates the interrupt_wq(), so that it now calls the
device's specific wq function, which checks the interrupt source
and tries to signal relevant events.

v2:

Increase limit of signal events to 4096 per process
Remove bitfields from struct cik_ih_ring_entry
Rename radeon_kfd_event_mmap to kfd_event_mmap
Add debug prints to allocate_free_slot and allocate_signal_page
Make allocate_event_notification_slot return a correct value
Add warning prints to create_signal_event
Remove error print from IOCTL path
Reformatted debug prints in kfd_event_mmap
Map correct size (as received from mmap) in kfd_event_mmap

v3:

Reduce limit of signal events back to 256 per process
Fix allocation of kernel memory for signal events
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

- AMDKFD_IOC_CREATE_EVENT:
	Creates a new event of a specified type

- AMDKFD_IOC_DESTROY_EVENT:
	Destroys an existing event

- AMDKFD_IOC_SET_EVENT:
	Signal an existing event

- AMDKFD_IOC_RESET_EVENT:
	Reset an existing event

- AMDKFD_IOC_WAIT_EVENTS:
	Wait on event(s) until they are signaled

v2:

- Move the limit of the signal events to kfd_ioctl.h so it
  can be used by userspace

v3:
- Change all bool fields in struct kfd_memory_exception_failure
to uint32_t
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch adds the interrupt handling module, kfd_interrupt.c, and its
related members in different data structures to the amdkfd driver.

The amdkfd interrupt module maintains an internal interrupt ring
per amdkfd device. The internal interrupt ring contains interrupts
that needs further handling. The extra handling is deferred to
a later time through a workqueue.

There's no acknowledgment for the interrupts we use. The hardware
simply queues a new interrupt each time without waiting.

The fixed-size internal queue means that it's possible for us to lose
interrupts because we have no back-pressure to the hardware.

However, only interrupts that are "wanted" by amdkfd, are copied into
the amdkfd s/w interrupt ring, in order to minimize the chances
for overflow of the ring.
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch adds a new interface function to the kfd->kgd interface.
The function is kgd_init_interrupts() and its function is to
initialize a pipe's interrupts.

The function currently enables the timestamp interrupt and the
bad opcode interrupt.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

Leaving AMD soon so need to update my email address to @gmail.com
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch creates a new structure for asic specific operations, instead
of using the existing structure of operations.

This is done to make the code flow more logic, readable and maintainable.

The change is done only to the device queue manager module at this point.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

kmalloc() returns a void pointer - no need to cast it in
drivers/gpu/drm/amd/amdkfd/kfd_process.c::kfd_process_destroy_delayed()
Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

- skl plane scaler support (Chandra Kondru)
- enable hsw cmd parser (Daniel and fix from Rebecca Palmer)
- skl dc5/6 support (low power display modes) from Suketu&Sunil
- dp compliance testing patches (Todd Previte)
- dp link training optimization (Mika Kahola)
- fixes to make skl resume work (Damien)
- rework modeset code to fully use atomic state objects (Ander&Maarten)
- pile of bxt w/a patchs from Nick Hoath
- (linear) partial gtt mmap support (Joonas Lahtinen)

* tag 'drm-intel-next-2015-05-08' of git://anongit.freedesktop.org/drm-intel: (103 commits)
  drm/i915: Update DRIVER_DATE to 20150508
  drm/i915: Only wait for required lanes in vlv_wait_port_ready()
  drm/i915: Fix possible security hole in command parsing
  drm/edid: Kerneldoc for newly added edid_corrupt
  drm/i915: Reject huge tiled objects
  Revert "drm/i915: Hack to tie both common lanes together on chv"
  drm/i915: Work around DISPLAY_PHY_CONTROL register corruption on CHV
  drm/i915: Implement chv display PHY lane stagger setup
  drm/i915/vlv: remove wait for previous GFX clk disable request
  drm/i915: Set crtc_state->active to false when CRTC is disabled (v2)
  drm/i915/skl: Re-indent part of skl_ddi_calculate_wrpll()
  drm/i915: Use partial view in mmap fault handler
  drm/i915: Add a partial GGTT view type
  drm/i915: Consider object pinned if any VMA is pinned
  drm/i915: Do not make assumptions on GGTT VMA sizes
  drm/i915/bxt: Mark WaCcsTlbPrefetchDisable as for Broxton also.
  drm/i915/bxt: Mark WaDisablePartialResolveInVc as for Broxton also.
  drm/i915/bxt: Mark Wa4x4STCOptimizationDisable as for Broxton also.
  drm/i915/bxt: Move WaForceEnableNonCoherent to Skylake only
  drm/i915/bxt: Enable WaEnableYV12BugFixInHalfSliceChicken7 for Broxton
  ...

Two watchdog changes that came through different trees had a non
conflicting conflict, that is, one changed the semantics of a variable
but no actual code conflict happened. So the merge appeared fine, but
the resulting code did not behave as expected.

Commit 195daf66 ("watchdog: enable the new user interface of the
watchdog mechanism") changes the semantics of watchdog_user_enabled,
which thereafter is only used by the functions introduced by
b3738d29 ("watchdog: Add watchdog enable/disable all functions").

There further appears to be a distinct lack of serialization between
setting and using watchdog_enabled, so perhaps we should wrap the
{en,dis}able_all() things in watchdog_proc_mutex.

This patch fixes a s2r failure reported by Michal; which I cannot
readily explain. But this does make the code internally consistent
again.
Reported-and-tested-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull MTD fixes from Brian Norris:
 "Two MTD fixes for 4.1:

   - readtest: the signal-handling code was clobbering the error codes
     we should be handling/reporting in this test, rendering it useless.
     Noticed by Coverity.

   - the common SPI NOR flash DT binding (merged for 4.1-rc1) is being
     revised, so let's change that before 4.1 is minted"

* tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd:
  Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"
  mtd: readtest: don't clobber error reports

Drivers may need to store the state of shared resources, such as PLLs
or FIFO space, into the atomic state. Allow this by making it possible
to subclass drm_atomic_state.

Changes since v1:
- Change member names for functions to atomic_state_(alloc,clear)
- Change __drm_atomic_state_new to drm_atomic_state_init
- Allow free function to be overridden too, in case extra memory is
  allocated in alloc.
Changes since v2:
- Rename *_default_free to default_release, to make clear it doesn't
  free the state object itself.

Cc: dri-devel@lists.freedesktop.org
Acked-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

old_plane_state is already assigned to old_state->plane_states[i] inside
for_each_plane_in_state(). Here we remove an the extra assignment.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Commit 4f71d0cb ("drm/dp: add a hw mutex around the transfer
functions. (v2)"), renamed the functions drm_dp_aux_register_i2c_bus()
and drm_dp_aux_unregister_i2c_bus() to drm_dp_aux_register() and
drm_dp_aux_unregister(), respectively. However, a comment referring to
the original names was not updated in the DP helper header file. Hence,
correct these names.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Pull USB fixes from Greg KH:
 "Here are some USB fixes and new device ids for 4.1-rc4.

  All are pretty minor, and have been in linux-next successfully"

* tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices
  Added another USB product ID for ELAN touchscreen quirks.
  xhci: gracefully handle xhci_irq dead device
  xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256
  xhci: fix isoc endpoint dequeue from advancing too far on transaction error
  usb: chipidea: debug: avoid out of bound read
  USB: visor: Match I330 phone more precisely
  USB: pl2303: Remove support for Samsung I330
  USB: cp210x: add ID for KCF Technologies PRN device
  usb: gadget: remove incorrect __init/__exit annotations
  usb: phy: isp1301: work around tps65010 dependency
  usb: gadget: serial: fix re-ordering of tx data
  usb: gadget: hid: Fix static variable usage
  usb: gadget: configfs: Fix interfaces array NULL-termination
  usb: gadget: xilinx: fix devm_ioremap_resource() check
  usb: dwc3: dwc3-omap: correct the register macros

Pull tty/serial fixes from Greg KH:
 "Here's some TTY and serial driver fixes for reported issues.

  All of these have been in linux-next successfully"

* tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  pty: Fix input race when closing
  tty/n_gsm.c: fix a memory leak when gsmtty is removed
  Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open"
  serial: omap: Fix error handling in probe
  earlycon: Revert log warnings

Pull staging / IIO driver fixes from Greg KH:
 "Here's some staging and iio driver fixes to resolve a number of
  reported issues.

  All of these have been in linux-next for a while"

* tag 'staging-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (31 commits)
  iio: light: hid-sensor-prox: Fix memory leak in probe()
  iio: adc: cc10001: Add delay before setting START bit
  iio: adc: cc10001: Fix regulator_get_voltage() return value check
  iio: adc: cc10001: Fix incorrect use of power-up/power-down register
  staging: gdm724x: Correction of variable usage after applying ALIGN()
  iio: adc: cc10001: Fix the channel number mapping
  staging: vt6655: lock MACvWriteBSSIDAddress.
  staging: vt6655: CARDbUpdateTSF bss timestamp correct tsf counter value.
  staging: vt6655: vnt_tx_packet Correct TX order of OWNED_BY_NIC
  staging: vt6655: Fix 80211 control and management status reporting.
  staging: vt6655: implement IEEE80211_TX_STAT_NOACK_TRANSMITTED
  staging: vt6655: device_free_tx_buf use only ieee80211_tx_status_irqsafe
  staging: vt6656: use ieee80211_tx_info to select packet type.
  staging: rtl8712: freeing an ERR_PTR
  staging: sm750: remove incorrect __exit annotation
  iio: kfifo: Set update_needed to false only if a buffer was allocated
  iio: mcp320x: Fix occasional incorrect readings
  iio: accel: mma9553: check input value for activity period
  iio: accel: mma9553: add enable channel for activity
  iio: accel: mma9551_core: prevent buffer overrun
  ...

Pull char/misc fix from Greg KH:
 "Here is one fix, in the extcon subsystem, that resolves a reported
  issue.

  It's been in linux-next for a number of weeks now, sorry for not
  getting it to you sooner"

* tag 'char-misc-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  extcon: usb-gpio: register extcon device before IRQ registration