- 14 Sep, 2013 15 commits
-
-
Pravin B Shelar authored
[ Upstream commit 9b96309c ] In case of genl-family with parallel ops off, dumpif() callback is expected to run under genl_lock, But commit def31174 (genl: Allow concurrent genl callbacks.) changed this behaviour where only first dumpit() op was called under genl-lock. For subsequent dump, only nlk->cb_lock was taken. Following patch fixes it by defining locked dumpit() and done() callback which takes care of genl-locking. Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> CC: Jesse Gross <jesse@nicira.com> CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sridhar Samudrala authored
[ Upstream commit 64535993 ] Fix inverted check when deleting an fdb entry. Signed-off-by:
Sridhar Samudrala <sri@us.ibm.com> Signed-off-by:
-
Dave Jones authored
[ Upstream commit d06f5187 ] Introduced in cf3c4c03 ("8139cp: Add dma_mapping_error checking") Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Timo Teräs authored
[ Upstream commit 77a482bd ] Fix ipgre_header() (header_ops->create) to return the correct amount of bytes pushed. Most callers of dev_hard_header() seem to care only if it was success, but af_packet.c uses it as offset to the skb to copy from userspace only once. In practice this fixes packet socket sendto()/sendmsg() to gre tunnels. Regression introduced in c5441932 ("GRE: Refactor GRE tunneling code.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Timo Teräs <timo.teras@iki.fi> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 3e3be275 ] In case a subtree did not match we currently stop backtracking and return NULL (root table from fib_lookup). This could yield in invalid routing table lookups when using subtrees. Instead continue to backtrack until a valid subtree or node is found and return this match. Also remove unneeded NULL check. Reported-by:
Teco Boot <teco@inf-net.nl> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Lamparter <equinox@diac24.net> Cc: <boutier@pps.univ-paris-diderot.fr> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit cd6b423a ] While investigating about strange increase of retransmit rates on hosts ~24 days after boot, Van found hystart was disabled if ca->epoch_start was 0, as following condition is true when tcp_time_stamp high order bit is set. (s32)(tcp_time_stamp - ca->epoch_start) < HZ Quoting Van : At initialization & after every loss ca->epoch_start is set to zero so I believe that the above line will turn off hystart as soon as the 2^31 bit is set in tcp_time_stamp & hystart will stay off for 24 days. I think we've observed that cubic's restart is too aggressive without hystart so this might account for the higher drop rate we observe. Diagnosed-by:
Van Jacobson <vanj@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2ed0edf9 ] commit 17a6e9f1 ("tcp_cubic: fix clock dependency") added an overflow error in bictcp_update() in following code : /* change the unit from HZ to bictcp_HZ */ t = ((tcp_time_stamp + msecs_to_jiffies(ca->delay_min>>3) - ca->epoch_start) << BICTCP_HZ) / HZ; Because msecs_to_jiffies() being unsigned long, compiler does implicit type promotion. We really want to constrain (tcp_time_stamp - ca->epoch_start) to a signed 32bit value, or else 't' has unexpected high values. This bugs triggers an increase of retransmit rates ~24 days after boot [1], as the high order bit of tcp_time_stamp flips. [1] for hosts with HZ=1000 Big thanks to Van Jacobson for spotting this problem. Diagnosed-by:
-
Linus Lüssing authored
[ Upstream commit 248ba8ec ] Currently we are reading an uninitialized value for the max_delay variable when snooping an MLD query message of invalid length and would update our timers with that. Fixing this by simply ignoring such broken MLD queries (just like we do for IGMP already). This is a regression introduced by: "bridge: disable snooping if there is no querier" (b00589af) Reported-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit aab515d7 ] AddressSanitizer [1] dynamic checker pointed a potential out of bound access in leaf_walk_rcu() We could allocate one more slot in tnode_new() to leave the prefetch() in-place but it looks not worth the pain. Bug added in commit 82cfbb00 ("[IPV4] fib_trie: iterator recode") [1] : https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernelReported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Veaceslav Falico authored
[ Upstream commit 9918d5bf ] Otherwise, on neighbour creation, bond_neigh_init() will be called with a foreign netdev. Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
-
Veaceslav Falico authored
[ Upstream commit 63134803 ] dev->ndo_neigh_setup() might need some of the values of neigh_parms, so populate them before calling it. Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit 15127478 ] commit df8ef8f3 macvlan: add FDB bridge ops and macvlan flags added a flags field to macvlan, which can be controlled from userspace. The idea is to make the interface future-proof so we can add flags and not new fields. However, flags value isn't validated, as a result, userspace can't detect which flags are supported. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
Roman Gushchin authored
[ Upstream commit 5f671d6b ] It's possible to assign an invalid value to the net.core.somaxconn sysctl variable, because there is no checks at all. The sk_max_ack_backlog field of the sock structure is defined as unsigned short. Therefore, the backlog argument in inet_listen() shouldn't exceed USHRT_MAX. The backlog argument in the listen() syscall is truncated to the somaxconn value. So, the somaxconn value shouldn't exceed 65535 (USHRT_MAX). Also, negative values of somaxconn are meaningless. before: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 net.core.somaxconn = 65536 $ sysctl -w net.core.somaxconn=-100 net.core.somaxconn = -100 after: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 error: "Invalid argument" setting key "net.core.somaxconn" $ sysctl -w net.core.somaxconn=-100 error: "Invalid argument" setting key "net.core.somaxconn" Based on a prior patch from Changli Gao. Signed-off-by:
Roman Gushchin <klamm@yandex-team.ru> Reported-by:
Changli Gao <xiaosuo@gmail.com> Suggested-by:
-
Daniel Borkmann authored
[ Upstream commit 446266b0 ] Commit 5c766d64 ("ipv4: introduce address lifetime") leaves the ifa resource that was allocated via inet_alloc_ifa() unfreed when returning the function with -EINVAL. Thus, free it first via inet_free_ifa(). Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Reviewed-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
stephen hemminger authored
[ Upstream commit cbd37556 ] When userspace passes a large priority value the assignment of the unsigned value hopt->prio to signed int cl->prio causes cl->prio to become negative and the comparison is with TC_HTB_NUMPRIO is always false. The result is that HTB crashes by referencing outside the array when processing packets. With this patch the large value wraps around like other values outside the normal range. See: https://bugzilla.kernel.org/show_bug.cgi?id=60669Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Acked-by:
-
- 08 Sep, 2013 25 commits
-
-
Greg Kroah-Hartman authored
-
David Jander authored
commit 4e67fb5f upstream. Avoid overlapping register regions by making the initial blklen of a new node 1. If a register write occurs to a yet uncached register, that is lower than but near an existing node's base_reg, a new node is created and it's blklen is set to an arbitrary value (sizeof(*rbnode)). That may cause this node to overlap with another node. Those nodes should be merged, but this merge doesn't happen yet, so this patch at least makes the initial blklen small enough to avoid hitting the wrong node, which may otherwise lead to severe breakage. Signed-off-by:
David Jander <david@protonic.nl> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
Zhouping Liu <zliu@redhat.com> Signed-off-by:
-
Fabio Estevam authored
commit ea8d1583 upstream. When building imx_v6_v7_defconfig with imx-drm drivers selected as modules, we get the following build error: ERROR: "imx_drm_encoder_get_mux_id" [drivers/staging/imx-drm/imx-ldb.ko] undefined! Export the required function to avoid this problem. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Julien Grall authored
commit 0d7febe5 upstream. When CONFIG_PREEMPT is enabled, Linux will not be able to boot and warn: [ 4.127825] ------------[ cut here ]------------ [ 4.133376] WARNING: at init/main.c:699 do_one_initcall+0x150/0x158() [ 4.140738] initcall xen_init_events+0x0/0x10c returned with preemption imbalance This is because xen_percpu_init uses get_cpu but doesn't have the corresponding put_cpu. Signed-off-by:
Julien Grall <julien.grall@linaro.org> Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by:
-
Mark Rusk authored
commit eefbc594 upstream. Using an uninitialized variable 'devnum' after 'goto out;' was causing panic. Just go ahead and return, we need to ignore AUX iLO devs. Oops: 0002 [#1] SMP . . . RIP [<ffffffffa033e270>] ilo_probe+0xec/0xe7c [hpilo] Signed-off-by:
Mark Rusk <mark.rusk@hp.com> Signed-off-by:
-
Lan Tianyu authored
commit 524f42fa upstream. The ECDT of ASUSTEK L4R doesn't provide correct command and data I/O ports. The DSDT provides the correct information instead. For this reason, add this machine to quirk list for ECDT validation and use the EC information from the DSDT. [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=60765Reported-and-tested-by:
Daniele Esposti <expo@expobrain.net> Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Wei Hu authored
commit 30b146d1 upstream. The temperature reporting interface stays the same, so we just add the PCI-ID to the list. Verified on AMD Olive Hill. Signed-off-by:
Wei Hu <wei@aristanetworks.com> Acked-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Graham Williams authored
commit d2572218 upstream. The gadget strings table should be null terminated. usb_gadget_get_string() loops through the table expecting a null at the end of the list. Signed-off-by:
Graham Williams <gwilli@broadcom.com> Signed-off-by:
-
Tomas Winkler authored
commit ff96066e upstream. Both H_IS and H_IE needs to be set to receive H_RDY interrupt 1. Assert H_IS to clear the interrupts during hw reset and use mei_me_reg_write instead of mei_hcsr_set as the later strips down the H_IS 2. fix interrupt disablement embarrassing typo hcsr |= ~H_IE -> hcsr &= ~H_IE; this will remove the unwanted interrupt on power down 3. remove useless debug print outs Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 28aaa950 upstream. This patch addresses a potential NULL pointer dereference regression in iscsit_setup_nop_out() code, specifically for two cases when a solicited NOPOUT triggers a ISCSI_REASON_PROTOCOL_ERROR reject to be generated. This is because iscsi_cmd is expected to be NULL for solicited NOPOUT case before iscsit_process_nop_out() locates the descriptor via TTT using iscsit_find_cmd_from_ttt(). This regression was originally introduced in: commit ba159914 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed Jul 3 03:48:24 2013 -0700 iscsi-target: Fix iscsit_add_reject* usage for iser Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit c9a03c12 upstream. This patch fixes a bug in __iscsi_target_login_thread() where an explicit network portal thread reset ends up leaking the iscsit_transport module reference, along with the associated iscsi_conn allocation. This manifests itself with iser-target where a NP reset causes the extra iscsit_transport reference to be taken in iscsit_conn_set_transport() during the reset, which prevents the ib_isert module from being unloaded after the NP thread shutdown has finished. Signed-off-by:
-
Nicholas Bellinger authored
commit 9d86a2be upstream. This patch addresses a regression bug within ImmediateData=Yes failure handling that ends up triggering an OOPs within >= v3.10 iscsi-target code. The problem occurs when iscsit_process_scsi_cmd() does the call to target_put_sess_cmd(), and once again in iscsit_get_immediate_data() that is triggered during two different cases: - When iscsit_sequence_cmd() returns CMDSN_LOWER_THAN_EXP, for which the descriptor state will already have been set to ISTATE_REMOVE by iscsit_sequence_cmd(), and - When iscsi_cmd->sense_reason is set, for which iscsit_execute_cmd() will have already called transport_send_check_condition_and_sense() to queue the exception response. It changes iscsit_process_scsi_cmd() to drop the early call, and makes iscsit_get_immediate_data() call target_put_sess_cmd() from a single location after dumping the immediate data for the failed command. The regression was initially introduced in commit: commit 561bf158 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed Jul 3 03:58:58 2013 -0700 iscsi-target: Fix iscsit_sequence_cmd reject handling for iser Signed-off-by:
-
Nicholas Bellinger authored
commit ee60bddb upstream. This patch fixes spc_emulate_inquiry_std() to add trailing ASCII spaces for INQUIRY vendor + model fields following SPC-4 text: "ASCII data fields described as being left-aligned shall have any unused bytes at the end of the field (i.e., highest offset) and the unused bytes shall be filled with ASCII space characters (20h)." This addresses a problem with Falconstor NSS multipathing. Reported-by:
Tomas Molota <tomas.molota@lightstorm.sk> Signed-off-by:
-
Stanislaw Gruszka authored
commit b2fcc0ae upstream. My current 3.11 fix: commit 788f7a56 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Thu Aug 1 12:07:55 2013 +0200 iwl4965: reset firmware after rfkill off broke rfkill notification to user-space . I missed that bug, because I compiled without CONFIG_RFKILL, sorry about that. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Felix Fietkau authored
commit 2dfca312 upstream. brcm80211 cannot handle sending frames with CCK rates as part of an A-MPDU session. Other drivers may have issues too. Set the flag in all drivers that have been tested with CCK rates. This fixes a reported brcmsmac regression introduced in commit ef47a5e4 "mac80211/minstrel_ht: fix cck rate sampling" Reported-by:
Tom Gundersen <teg@jklm.no> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 2a3ba63c upstream. IBSS needs to release the channel context when leaving but I evidently missed that. Fix it. Signed-off-by:
-
Sujith Manoharan authored
commit 19c36160 upstream. The PLL hang workaround is required only for AR9330 and AR9340. This issue was first observed on an AP121 and the WAR is enabled for AR9340 also (DB120 etc.), since it uses a PLL design identical to AR9330. This is not required for AR9485 and AR9550. Various bugs have been reported regarding this: https://bugzilla.redhat.com/show_bug.cgi?id=997217 https://bugzilla.redhat.com/show_bug.cgi?id=994648Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Helmut Schaa authored
commit d2e9fc14 upstream. ath9k_htc adds padding between the 802.11 header and the payload during TX by moving the header. When handing the frame back to mac80211 for TX status handling the header is not moved back into its original position. This can result in a too small skb headroom when entering ath9k_htc again (due to a soft retransmission for example) causing an skb_under_panic oops. Fix this by moving the 802.11 header back into its original position before returning the frame to mac80211 as other drivers like rt2x00 or ath5k do. Reported-by:
Marc Kleine-Budde <mkl@blackshift.org> Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Tested-by:
-
Yinghai Lu authored
commit 527bf129 upstream. Dave Hansen reported that systems between 500G and 600G RAM crash early if DEBUG_PAGEALLOC is selected. > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k > [ 0.000000] BRK [0x02086000, 0x02086fff] PGTABLE > [ 0.000000] BRK [0x02087000, 0x02087fff] PGTABLE > [ 0.000000] BRK [0x02088000, 0x02088fff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0xe80ee00000-0xe80effffff] > [ 0.000000] [mem 0xe80ee00000-0xe80effffff] page 4k > [ 0.000000] BRK [0x02089000, 0x02089fff] PGTABLE > [ 0.000000] BRK [0x0208a000, 0x0208afff] PGTABLE > [ 0.000000] Kernel panic - not syncing: alloc_low_page: ran out of memory It turns out that we missed increasing needed pages in BRK to mapping initial 2M and [0,1M) when we switched to use the #PF handler to set memory mappings: > commit 8170e6be > Author: H. Peter Anvin <hpa@zytor.com> > Date: Thu Jan 24 12:19:52 2013 -0800 > > x86, 64bit: Use a #PF handler to materialize early mappings on demand Before that, we had the maping from [0,512M) in head_64.S, and we can spare two pages [0-1M). After that change, we can not reuse pages anymore. When we have more than 512M ram, we need an extra page for pgd page with [512G, 1024g). Increase pages in BRK for page table to solve the boot crash. Reported-by:
Dave Hansen <dave.hansen@intel.com> Bisected-by:
Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1376351004-4015-1-git-send-email-yinghai@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Trond Myklebust authored
commit 347e2233 upstream. Some architectures, such as ARM-32 do not return the same base address when you call kmap_atomic() twice on the same page. This causes problems for the memmove() call in the XDR helper routine "_shift_data_right_pages()", since it defeats the detection of overlapping memory ranges, and has been seen to corrupt memory. The fix is to distinguish between the case where we're doing an inter-page copy or not. In the former case of we know that the memory ranges cannot possibly overlap, so we can additionally micro-optimise by replacing memmove() with memcpy(). Reported-by:
Mark Young <MYoung@nvidia.com> Reported-by:
Matt Craighead <mcraighead@nvidia.com> Cc: Bruce Fields <bfields@fieldses.org> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by:
-
Imre Deak authored
commit 77fa4cbd upstream. Fix the typo introduced in commit 1a2eb460 Author: Keith Packard <keithp@keithp.com> Date: Wed Nov 16 16:26:07 2011 -0800 drm/i915: Hook up Ivybridge eDP This fixes eDP link-training failures and cases where all voltage swing /pre-emphasis levels were tried and failed during clock recovery and - as a fallback - we go on to do channel equalization with the last voltage swing/pre-emphasis level which will succeed. Both issues can lead to a blank screen. v2: - improve commit message Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64880Tested-by:
Jeremy Moles <cubicool@gmail.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Jakob Bornecrantz authored
commit 6e4dcff3 upstream. This fixes the piglit test texturing/max-texture-size causing the VM to die due to a too large SVGA command. Signed-off-by:
Jakob Bornecrantz <jakob@vmware.com> Reviewed-by:
Biran Paul <brianp@vmware.com> Reviewed-by:
Zack Rusin <zackr@vmware.com> Signed-off-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Tejun Heo authored
commit b22ce278 upstream. If !PREEMPT, a kworker running work items back to back can hog CPU. This becomes dangerous when a self-requeueing work item which is waiting for something to happen races against stop_machine. Such self-requeueing work item would requeue itself indefinitely hogging the kworker and CPU it's running on while stop_machine would wait for that CPU to enter stop_machine while preventing anything else from happening on all other CPUs. The two would deadlock. Jamie Liu reports that this deadlock scenario exists around scsi_requeue_run_queue() and libata port multiplier support, where one port may exclude command processing from other ports. With the right timing, scsi_requeue_run_queue() can end up requeueing itself trying to execute an IO which is asked to be retried while another device has an exclusive access, which in turn can't make forward progress due to stop_machine. Fix it by invoking cond_resched() after executing each work item. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Jamie Liu <jamieliu@google.com> References: http://thread.gmane.org/gmane.linux.kernel/1552567Signed-off-by:
-
Andrey Vagin authored
commit 6f6b8951 upstream. If the system had a few memory groups and all of them were destroyed, memcg_limited_groups_array_size has non-zero value, but all new caches are created without memcg_params, because memcg_kmem_enabled() returns false. We try to enumirate child caches in a few places and all of them are potentially dangerous. For example my kernel is compiled with CONFIG_SLAB and it crashed when I tryed to mount a NFS share after a few experiments with kmemcg. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff8118166a>] do_tune_cpucache+0x8a/0xd0 PGD b942a067 PUD b999f067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: fscache(+) ip6table_filter ip6_tables iptable_filter ip_tables i2c_piix4 pcspkr virtio_net virtio_balloon i2c_core floppy CPU: 0 PID: 357 Comm: modprobe Not tainted 3.11.0-rc7+ #59 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800b9f98240 ti: ffff8800ba32e000 task.ti: ffff8800ba32e000 RIP: 0010:[<ffffffff8118166a>] [<ffffffff8118166a>] do_tune_cpucache+0x8a/0xd0 RSP: 0018:ffff8800ba32fb70 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 RDX: 0000000000000000 RSI: ffff8800b9f98910 RDI: 0000000000000246 RBP: ffff8800ba32fba0 R08: 0000000000000002 R09: 0000000000000004 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000010 R13: 0000000000000008 R14: 00000000000000d0 R15: ffff8800375d0200 FS: 00007f55f1378740(0000) GS:ffff8800bfa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f24feba57a0 CR3: 0000000037b51000 CR4: 00000000000006f0 Call Trace: enable_cpucache+0x49/0x100 setup_cpu_cache+0x215/0x280 __kmem_cache_create+0x2fa/0x450 kmem_cache_create_memcg+0x214/0x350 kmem_cache_create+0x2b/0x30 fscache_init+0x19b/0x230 [fscache] do_one_initcall+0xfa/0x1b0 load_module+0x1c41/0x26d0 SyS_finit_module+0x86/0xb0 system_call_fastpath+0x16/0x1b Signed-off-by:
Andrey Vagin <avagin@openvz.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Glauber Costa <glommer@openvz.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Russ Anderson authored
commit 21ea9f5a upstream. "cat /sys/devices/system/memory/memory*/removable" crashed the system. The problem is that show_mem_removable() is passing a bad pfn to is_mem_section_removable(), which causes if (!node_online(page_to_nid(page))) to blow up. Why is it passing in a bad pfn? The reason is that show_mem_removable() will loop sections_per_block times. sections_per_block is 16, but mem->section_count is 8, indicating holes in this memory block. Checking that the memory section is present before checking to see if the memory section is removable fixes the problem. harp5-sys:~ # cat /sys/devices/system/memory/memory*/removable 0 1 1 1 1 1 1 1 1 1 1 1 1 1 BUG: unable to handle kernel paging request at ffffea00c3200000 IP: [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90 PGD 83ffd4067 PUD 37bdfce067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: autofs4 binfmt_misc rdma_ucm rdma_cm iw_cm ib_addr ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_cm ib_uverbs ib_umad iw_cxgb3 cxgb3 mdio mlx4_en mlx4_ib ib_sa mlx4_core ib_mthca ib_mad ib_core fuse nls_iso8859_1 nls_cp437 vfat fat joydev loop hid_generic usbhid hid hwperf(O) numatools(O) dm_mod iTCO_wdt ipv6 iTCO_vendor_support igb i2c_i801 ioatdma i2c_algo_bit ehci_pci pcspkr lpc_ich i2c_core ehci_hcd ptp sg mfd_core dca rtc_cmos pps_core mperf button xhci_hcd sd_mod crc_t10dif usbcore usb_common scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh gru(O) xvma(O) xfs crc32c libcrc32c thermal sata_nv processor piix mptsas mptscsih scsi_transport_sas mptbase megaraid_sas fan thermal_sys hwmon ext3 jbd ata_piix ahci libahci libata scsi_mod CPU: 4 PID: 5991 Comm: cat Tainted: G O 3.11.0-rc5-rja-uv+ #10 Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013 task: ffff88081f034580 ti: ffff880820022000 task.ti: ffff880820022000 RIP: 0010:[<ffffffff81117ed1>] [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90 RSP: 0018:ffff880820023df8 EFLAGS: 00010287 RAX: 0000000000040000 RBX: ffffea00c3200000 RCX: 0000000000000004 RDX: ffffea00c30b0000 RSI: 00000000001c0000 RDI: ffffea00c3200000 RBP: ffff880820023e38 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea00c33c0000 R13: 0000160000000000 R14: 6db6db6db6db6db7 R15: 0000000000000001 FS: 00007ffff7fb2700(0000) GS:ffff88083fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffea00c3200000 CR3: 000000081b954000 CR4: 00000000000407e0 Call Trace: show_mem_removable+0x41/0x70 dev_attr_show+0x2a/0x60 sysfs_read_file+0xf7/0x1c0 vfs_read+0xc8/0x130 SyS_read+0x5d/0xa0 system_call_fastpath+0x16/0x1b Signed-off-by:
Russ Anderson <rja@sgi.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Reviewed-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
-
