* eisa:
  EISA: Call put_device() if device_register() fails

We need to give up the last reference to edev->dev, so we need to call
put_device().
Signed-off-by: Levente Kurusa <levex@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

* pci/yijing-dev_is_pci:
  alpha/PCI: Use dev_is_pci() to identify PCI devices
  arm/PCI: Use dev_is_pci() to identify PCI devices
  arm/PCI: Use dev_is_pci() to identify PCI devices
  parisc/PCI: Use dev_is_pci() to identify PCI devices
  sparc/PCI: Use dev_is_pci() to identify PCI devices
  ia64/PCI: Use dev_is_pci() to identify PCI devices
  x86/PCI: Use dev_is_pci() to identify PCI devices
  PCI: Use dev_is_pci() to identify PCI devices

* pci/misc:
  PCI: Stop clearing bridge Secondary Status when setting up I/O aperture
  PCI: Prevent bus conflicts while checking for bridge apertures
  PCI: Drop "irq" param from *_restore_msi_irqs()
  PCI/portdrv: Remove superfluous name cast
  PCI: Clear NumVFs when disabling SR-IOV in sriov_init()

* for-linus:
  MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers
  PCI: Disable Bus Master only on kexec reboot
  PCI: mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin
  PCI: Omit PCI ID macro strings to shorten quirk names
  PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  Revert "workqueue: allow work_on_cpu() to be called recursively"
  PCI: Avoid unnecessary CPU switch when calling driver .probe() method

pci_setup_bridge_io() accessed PCI_IO_BASE and PCI_IO_LIMIT using dword
(32-bit) reads and writes, which also access the Secondary Status register.
Since the Secondary Status register is in the upper 16 bits of the dword,
and we preserved those upper 16 bits, this had the effect of clearing any
of the write-1-to-clear bits that happened to be set in the Secondary
Status register.

That's not what we want, so use word (16-bit) accesses to update only
PCI_IO_BASE and PCI_IO_LIMIT.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

pci_bridge_check_ranges() determines whether the bridge supports an I/O
aperture and a prefetchable memory aperture.

Previously, if the I/O aperture was unsupported, disabled, or configured at
[io 0x0000-0x0fff], we wrote 0xf0 to PCI_IO_BASE and PCI_IO_LIMIT, which,
if the bridge supports it, enables the I/O aperture at [io 0xf000-0xffff].
The enabled aperture may conflict with other devices in the system.

Similarly, we wrote 0xfff0 to PCI_PREF_MEMORY_BASE and
PCI_PREF_MEMORY_LIMIT, which enables the prefetchable memory aperture at
[mem 0xfff00000-0xffffffff], and that may also conflict with other devices.

All we need to know is whether the base and limit registers are writable,
so we can use values that leave the apertures disabled, e.g., PCI_IO_BASE =
0xf0, PCI_IO_LIMIT = 0xe0, PCI_PREF_MEMORY_BASE = 0xfff0,
PCI_PREF_MEMORY_LIMIT = 0xffe0.

Writing non-zero values to both the base and limit registers means we
detect whether either or both are writable, as we did before.
Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Based-on-patch-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Change x86_msi.restore_msi_irqs(struct pci_dev *dev, int irq) to
x86_msi.restore_msi_irqs(struct pci_dev *dev).

restore_msi_irqs() restores multiple MSI-X IRQs, so param 'int irq' is
unneeded.  This makes code more consistent between vm and bare metal.

Dom0 MSI-X restore code can also be optimized as XEN only has a hypercall
to restore all MSI-X vectors at one time.
Tested-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

device_driver.name is "const char *"
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Use dev_is_pci() instead of checking bus type directly.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Use dev_is_pci() instead of checking bus type directly.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Use dev_is_pci() instead of checking bus type directly.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Use dev_is_pci() instead of equivalent local function.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Use dev_is_pci() instead of checking bus type directly.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Add entries for PCI host controller drivers in drivers/pci/host/.

Signed-off-by: Mohit Kumar <mohit.kumar@st.com>             # DESIGNWARE
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>       # DESIGNWARE
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>         # R-CAR
Double-Plus-Acked-by: Jason Cooper <jason@lakedaemon.net>   # MVEBU
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Richard Zhu <r65037@freescale.com>                # IMX6

Use dev_is_pci() instead of checking bus type directly.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Use dev_is_pci() instead of checking bus type directly.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Use dev_is_pci() instead of checking bus type directly.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Add a flag to tell the PCI subsystem that kernel is shutting down in
preparation to kexec a kernel.  Add code in PCI subsystem to use this flag
to clear Bus Master bit on PCI devices only in case of kexec reboot.

This fixes a power-off problem on Acer Aspire V5-573G and likely other
machines and avoids any other issues caused by clearing Bus Master bit on
PCI devices in normal shutdown path.  The problem was introduced by
b566a22c ("PCI: disable Bus Master on PCI device shutdown").

This patch is based on discussion at
http://marc.info/?l=linux-pci&m=138425645204355&w=2

Link: https://bugzilla.kernel.org/show_bug.cgi?id=63861Reported-by: Chang Liu <cl91tp@gmail.com>
Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: stable@vger.kernel.org	# v3.5+

The emulated bridge does not support interrupts, so it should return the
value 0 for Interrupt Line and Interrupt Pin.  This indicates that
interrupts are not supported.

Since Max_Lat and Min_Gnt are also in the same 32-bit word, we return
0 for them, which means "do not care."

This corrects an error message from the kernel:

  pci 0000:00:01.0: of_irq_parse_pci() failed with rc=135

Which is due to the default return of 0xFFFFFFFF indicating that
interrupts are supported.

The error message regression was caused by 16b84e5a ("of/irq: Create
of_irq_parse_and_map_pci() to consolidate arch code.")
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>

Pasting the verbatim PCI_(VENDOR|DEVICE)_* macros in the __pci_fixup_*
symbol names results in insanely long names such as

__pci_fixup_resumePCI_VENDOR_ID_SERVERWORKSPCI_DEVICE_ID_SERVERWORKS_HT1000SBquirk_disable_broadcom_boot_interrupt

When Link-Time Optimization adds its numeric suffix to such symbol, it
overflows the namebuf[KSYM_NAME_LEN] array in kernel/kallsyms.c.  Use the
line number instead to create (nearly) unique symbol names.
Reported-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Andi Kleen <ak@linux.intel.com>

After commit bcdde7e2 (sysfs: make __sysfs_remove_dir() recursive)
I'm seeing traces analogous to the one below in Thunderbolt testing:

WARNING: CPU: 3 PID: 76 at /scratch/rafael/work/linux-pm/fs/sysfs/group.c:214 sysfs_remove_group+0x59/0xe0()
 sysfs group ffffffff81c6c500 not found for kobject '0000:08'
 Modules linked in: ...
 CPU: 3 PID: 76 Comm: kworker/u16:7 Not tainted 3.13.0-rc1+ #76
 Hardware name: Acer Aspire S5-391/Venus    , BIOS V1.02 05/29/2012
 Workqueue: kacpi_hotplug acpi_hotplug_work_fn
  0000000000000009 ffff8801644b9ac8 ffffffff816b23bf 0000000000000007
  ffff8801644b9b18 ffff8801644b9b08 ffffffff81046607 ffff88016925b800
  0000000000000000 ffffffff81c6c500 ffff88016924f928 ffff88016924f800
 Call Trace:
  [<ffffffff816b23bf>] dump_stack+0x4e/0x71
  [<ffffffff81046607>] warn_slowpath_common+0x87/0xb0
  [<ffffffff810466d1>] warn_slowpath_fmt+0x41/0x50
  [<ffffffff811e42ef>] ? sysfs_get_dirent_ns+0x6f/0x80
  [<ffffffff811e5389>] sysfs_remove_group+0x59/0xe0
  [<ffffffff8149f00b>] dpm_sysfs_remove+0x3b/0x50
  [<ffffffff81495818>] device_del+0x58/0x1c0
  [<ffffffff814959c8>] device_unregister+0x48/0x60
  [<ffffffff813254fe>] pci_remove_bus+0x6e/0x80
  [<ffffffff81325548>] pci_remove_bus_device+0x38/0x110
  [<ffffffff8132555d>] pci_remove_bus_device+0x4d/0x110
  [<ffffffff81325639>] pci_stop_and_remove_bus_device+0x19/0x20
  [<ffffffff813418d0>] disable_slot+0x20/0xe0
  [<ffffffff81341a38>] acpiphp_check_bridge+0xa8/0xd0
  [<ffffffff813427ad>] hotplug_event+0x17d/0x220
  [<ffffffff81342880>] hotplug_event_work+0x30/0x70
  [<ffffffff8136d665>] acpi_hotplug_work_fn+0x18/0x24
  [<ffffffff81061331>] process_one_work+0x261/0x450
  [<ffffffff81061a7e>] worker_thread+0x21e/0x370
  [<ffffffff81061860>] ? rescuer_thread+0x300/0x300
  [<ffffffff81068342>] kthread+0xd2/0xe0
  [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
  [<ffffffff816c19bc>] ret_from_fork+0x7c/0xb0
  [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70

(Mika Westerberg sees them too in his tests).

Some investigation documented in kernel bug #65281 led me to the
conclusion that the source of the problem is the device_del() in
pci_stop_dev() as it now causes the sysfs directory of the device to be
removed recursively along with all of its subdirectories.  That includes
the sysfs directory of the device's subordinate bus (dev->subordinate) and
its "power" group.

Consequently, when pci_remove_bus() is called for dev->subordinate in
pci_remove_bus_device(), it calls device_unregister(&bus->dev), but at this
point the sysfs directory of bus->dev doesn't exist any more and its
"power" group doesn't exist either.  Thus, when dpm_sysfs_remove() called
from device_del() tries to remove that group, it triggers the above
warning.

That indicates a logical mistake in the design of
pci_stop_and_remove_bus_device(), which causes bus device objects to be
left behind their parents (bridge device objects) and can be fixed by
moving the device_del() from pci_stop_dev() into pci_destroy_dev(), so
pci_remove_bus() can be called for the device's subordinate bus before the
device itself is unregistered from the hierarchy.  Still, the driver, if
any, should be detached from the device in pci_stop_dev(), so use
device_release_driver() directly from there.

References: https://bugzilla.kernel.org/show_bug.cgi?id=65281#c6Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

This reverts commit c2fda509.

c2fda509 removed lockdep annotation from work_on_cpu() to work around
the PCI path that calls work_on_cpu() from within a work_on_cpu() work item
(PF driver .probe() method -> pci_enable_sriov() -> add VFs -> VF driver
.probe method).

961da7fb6b22 ("PCI: Avoid unnecessary CPU switch when calling driver
.probe() method) avoids that recursive work_on_cpu() use in a different
way, so this revert restores the work_on_cpu() lockdep annotation.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tejun Heo <tj@kernel.org>

If we are already on a CPU local to the device, call the driver .probe()
method directly without using work_on_cpu().

This is a workaround for a lockdep warning in the following scenario:

  pci_call_probe
    work_on_cpu(cpu, local_pci_probe, ...)
      driver .probe
        pci_enable_sriov
          ...
            pci_bus_add_device
              ...
                pci_call_probe
                  work_on_cpu(cpu, local_pci_probe, ...)

It would be better to fix PCI so we don't call VF driver .probe() methods
from inside a PF driver .probe() method, but that's a bigger project.

[bhelgaas: open bugzilla, rework comments & changelog]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=65071
Link: http://lkml.kernel.org/r/CAE9FiQXYQEAZ=0sG6+2OdffBqfLS9MpoN1xviRR9aDbxPxcKxQ@mail.gmail.com
Link: http://lkml.kernel.org/r/20130624195942.40795.27292.stgit@ahduyck-cp1.jf.intel.comTested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>

When SR-IOV is disabled (VF Enable is cleared), NumVFs is not very useful,
so this patch clears it out to prevent confusing lspci output like that
below.  We already clear NumVFs in sriov_disable(), and this does the same
when we disable SR-IOV as part of parsing the SR-IOV capability.

  $ lspci -vvv -s 13:00.0
  13:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01)
      Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
          IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
          Initial VFs: 64, Total VFs: 64, Number of VFs: 64, ...

[bhelgaas: changelog]
Signed-off-by: ethan.zhao <ethan.kernel@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Merge tag 'ecryptfs-3.13-rc1-quiet-checkers' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull minor eCryptfs fix from Tyler Hicks:
 "Quiet static checkers by removing unneeded conditionals"

* tag 'ecryptfs-3.13-rc1-quiet-checkers' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  eCryptfs: file->private_data is always valid

Pull second set of sound fixes from Takashi Iwai:
 "A collection of small fixes in HD-audio quirks and runtime PM, ASoC
  rcar, abs8500 and other codecs.  Most of commits are for stable
  kernels, too"

* tag 'sound-fix2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Set current_headset_type to ALC_HEADSET_TYPE_ENUM (janitorial)
  ALSA: hda - Provide missing pin configs for VAIO with ALC260
  ALSA: hda - Add headset quirk for Dell Inspiron 3135
  ALSA: hda - Fix the headphone jack detection on Sony VAIO TX
  ALSA: hda - Fix missing bass speaker on ASUS N550
  ALSA: hda - Fix unbalanced runtime PM notification at resume
  ASoC: arizona: Set FLL to free-run before disabling
  ALSA: hda - A casual Dell Headset quirk
  ASoC: rcar: fixup dma_async_issue_pending() timing
  ASoC: rcar: off by one in rsnd_scu_set_route()
  ASoC: wm5110: Add post SYSCLK register patch for rev D chip
  ASoC: ab8500: Revert to using custom I/O functions
  ALSA: hda - Also enable mute/micmute LED control for "Lenovo dock" fixup
  ALSA: firewire-lib: include sound/asound.h to refer to snd_pcm_format_t
  ALSA: hda - Select FW_LOADER from CONFIG_SND_HDA_CODEC_CA0132_DSP
  ALSA: hda - Enable mute/mic-mute LEDs for more Thinkpads with Realtek codec
  ASoC: rcar: fixup mod access before checking

Pull DRM fixes from Dave Airlie:
 "I was going to leave this until post -rc1 but sysfs fixes broke
  hotplug in userspace, so I had to fix it harder, otherwise a set of
  pulls from intel, radeon and vmware,

  The vmware/ttm changes are bit larger but since its early and they are
  unlikely to break anything else I put them in, it lets vmware work
  with dri3"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (36 commits)
  drm/sysfs: fix hotplug regression since lifetime changes
  drm/exynos: g2d: fix memory leak to userptr
  drm/i915: Fix gen3 self-refresh watermarks
  drm/ttm: Remove set_need_resched from the ttm fault handler
  drm/ttm: Don't move non-existing data
  drm/radeon: hook up backlight functions for CI and KV family.
  drm/i915: Replicate BIOS eDP bpp clamping hack for hsw
  drm/i915: Do not enable package C8 on unsupported hardware
  drm/i915: Hold pc8 lock around toggling pc8.gpu_idle
  drm/i915: encoder->get_config is no longer optional
  drm/i915/tv: add ->get_config callback
  drm/radeon/cik: Add macrotile mode array query
  drm/radeon/cik: Return backend map information to userspace
  drm/vmwgfx: Make vmwgfx dma buffers prime aware
  drm/vmwgfx: Make surfaces prime-aware
  drm/vmwgfx: Hook up the prime ioctls
  drm/ttm: Add a minimal prime implementation for ttm base objects
  drm/vmwgfx: Fix false lockdep warning
  drm/ttm: Allow execbuf util reserves without ticket
  drm/i915: restore the early forcewake cleanup
  ...

Pull PCI updates from Bjorn Helgaas:
 "Miscellaneous
   - Remove duplicate disable from pcie_portdrv_remove() (Yinghai Lu)
   - Fix whitespace, capitalization, and spelling errors (Bjorn Helgaas)"

* tag 'pci-v3.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove()
  PCI: Fix whitespace, capitalization, and spelling errors

Pull SCSI target updates from Nicholas Bellinger:
 "Things have been quiet this round with mostly bugfixes, percpu
  conversions, and other minor iscsi-target conformance testing changes.

  The highlights include:

   - Add demo_mode_discovery attribute for iscsi-target (Thomas)
   - Convert tcm_fc(FCoE) to use percpu-ida pre-allocation
   - Add send completion interrupt coalescing for ib_isert
   - Convert target-core to use percpu-refcounting for se_lun
   - Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn
   - tcm_loop updates (Hannes)
   - target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes)

  v3.14 is currently shaping to be a busy development cycle in target
  land, with initial support for T10 Referrals and T10 DIF currently on
  the roadmap"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits)
  iscsi-target: chap auth shouldn't match username with trailing garbage
  iscsi-target: fix extract_param to handle buffer length corner case
  iscsi-target: Expose default_erl as TPG attribute
  target_core_configfs: split up ALUA supported states
  target_core_alua: Make supported states configurable
  target_core_alua: Store supported ALUA states
  target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED
  target_core_alua: spellcheck
  target core: rename (ex,im)plict -> (ex,im)plicit
  percpu-refcount: Add percpu-refcount.o to obj-y
  iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN
  iscsi-target: Convert iscsi_session statistics to atomic_long_t
  target: Convert se_device statistics to atomic_long_t
  target: Fix delayed Task Aborted Status (TAS) handling bug
  iscsi-target: Reject unsupported multi PDU text command sequence
  ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call
  iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn
  target: Core does not need blkdev.h
  target: Pass through I/O topology for block backstores
  iser-target: Avoid using FRMR for single dma entry requests
  ...

Pull hwmon fixes from Guenter Roeck:
 - acpi_power_meter: Fix return value check from call to
   acpi_bus_get_device
 - nct6775: Fix/improve NCT6791 support
 - lm75: Add support for GMT G751

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (acpi_power_meter) Fix acpi_bus_get_device() return value check
  hwmon: (nct6775) NCT6791 supports weight control only for CPUFAN
  hwmon: (nct6775) Monitor additional temperature registers
  hwmon: (lm75) Add support for GMT G751 chip

Pull networking fixes from David Miller:

 1) Fix memory leaks and other issues in mwifiex driver, from Amitkumar
    Karwar.

 2) skb_segment() can choke on packets using frag lists, fix from
    Herbert Xu with help from Eric Dumazet and others.

 3) IPv4 output cached route instantiation properly handles races
    involving two threads trying to install the same route, but we
    forgot to propagate this logic to input routes as well.  Fix from
    Alexei Starovoitov.

 4) Put protections in place to make sure that recvmsg() paths never
    accidently copy uninitialized memory back into userspace and also
    make sure that we never try to use more that sockaddr_storage for
    building the on-kernel-stack copy of a sockaddr.  Fixes from Hannes
    Frederic Sowa.

 5) R8152 driver transmit flow bug fixes from Hayes Wang.

 6) Fix some minor fallouts from genetlink changes, from Johannes Berg
    and Michael Opdenacker.

 7) AF_PACKET sendmsg path can race with netdevice unregister notifier,
    fix by using RCU to make sure the network device doesn't go away
    from under us.  Fix from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  gso: handle new frag_list of frags GRO packets
  genetlink: fix genl_set_err() group ID
  genetlink: fix genlmsg_multicast() bug
  packet: fix use after free race in send path when dev is released
  xen-netback: stop the VIF thread before unbinding IRQs
  wimax: remove dead code
  net/phy: Add the autocross feature for forced links on VSC82x4
  net/phy: Add VSC8662 support
  net/phy: Add VSC8574 support
  net/phy: Add VSC8234 support
  net: add BUG_ON if kernel advertises msg_namelen > sizeof(struct sockaddr_storage)
  net: rework recvmsg handler msg_name and msg_namelen logic
  bridge: flush br's address entry in fdb when remove the
  net: core: Always propagate flag changes to interfaces
  ipv4: fix race in concurrent ip_route_input_slow()
  r8152: fix incorrect type in assignment
  r8152: support stopping/waking tx queue
  r8152: modify the tx flow
  r8152: fix tx/rx memory overflow
  netfilter: ebt_ip6: fix source and destination matching
  ...

Pull ARM fixes from Russell King:
 "Some small fixes for this merge window, most of them quite self
  explanatory - the biggest thing here is a fix for the ARMv7 LPAE
  suspend/resume support"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7894/1: kconfig: select GENERIC_CLOCKEVENTS if HAVE_ARM_ARCH_TIMER
  ARM: 7893/1: bitops: only emit .arch_extension mp if CONFIG_SMP
  ARM: 7892/1: Fix warning for V7M builds
  ARM: 7888/1: seccomp: not compatible with ARM OABI
  ARM: 7886/1: make OABI default to off
  ARM: 7885/1: Save/Restore 64-bit TTBR registers on LPAE suspend/resume
  ARM: 7884/1: mm: Fix ECC mem policy printk
  ARM: 7883/1: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE
  ARM: 7882/1: mm: fix __phys_to_virt to work with 64 bit phys_addr_t in BE case
  ARM: 7881/1: __fixup_smp read of SCU config should do byteswap in BE case
  ARM: Fix nommu.c build warning

Pull KVM fixes from Gleb Natapov.

* 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: kvm_clear_guest_page(): fix empty_zero_page usage
  kvm: mmu: delay mmu audit activation
  arm/arm64: KVM: Fix hyp mappings of vmalloc regions

Pull aio fixes from Benjamin LaHaise.

* git://git.kvack.org/~bcrl/aio-next:
  aio: nullify aio->ring_pages after freeing it
  aio: prevent double free in ioctx_alloc
  aio: Fix a trinity splat

Pull nfsd bugfixes from Bruce Fields:
 "A couple nfsd bugfixes"

* 'for-3.13' of git://linux-nfs.org/~bfields/linux:
  nfsd4: fix xdr decoding of large non-write compounds
  nfsd: make sure to balance get/put_write_access
  nfsd: split up nfsd_setattr

Pull GFS2 fixes from Steven Whitehouse:
 "A couple of small, but important bug fixes for GFS2.  The first one
  fixes a possible NULL pointer dereference, and the second one resolves
  a reference counting issue in one of the lesser used paths through
  atomic_open"

* tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Fix ref count bug relating to atomic_open
  GFS2: fix potential NULL pointer dereference

Pull btrfs fixes from Chris Mason:
 "Almost all of these are bug fixes.  Dave Sterba's documentation update
  is the big exception because he removed our promises to set any
  machine running Btrfs on fire"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Documentation: filesystems: update btrfs tools section
  Documentation: filesystems: add new btrfs mount options
  btrfs: update kconfig help text
  btrfs: fix bio_size_ok() for max_sectors > 0xffff
  btrfs: Use trace condition for get_extent tracepoint
  btrfs: fix typo in the log message
  Btrfs: fix list delete warning when removing ordered root from the list
  Btrfs: print bytenr instead of page pointer in check-int
  Btrfs: remove dead codes from ctree.h
  Btrfs: don't wait for ordered data outside desired range
  Btrfs: fix lockdep error in async commit
  Btrfs: avoid heavy operations in btrfs_commit_super
  Btrfs: fix __btrfs_start_workers retval
  Btrfs: disable online raid-repair on ro mounts
  Btrfs: do not inc uncorrectable_errors counter on ro scrubs
  Btrfs: only drop modified extents if we logged the whole inode
  Btrfs: make sure to copy everything if we rename
  Btrfs: don't BUG_ON() if we get an error walking backrefs

Pull second xfs update from Ben Myers:
 "There are a couple of patches that I wasn't quite sure about in time
  for our initial 3.13 pull request, a bugfix, and an update to add Dave
  to MAINTAINERS:

  Here we have a performance fix for inode iversion, increased inode
  cluster size for v5 superblock filesystems, a fix for error handling
  in xfs_bmap_add_attrfork, and a MAINTAINERS update to add Dave"

* tag 'xfs-for-linus-v3.13-rc1-2' of git://oss.sgi.com/xfs/xfs:
  xfs: open code inc_inode_iversion when logging an inode
  xfs: increase inode cluster size for v5 filesystems
  xfs: fix unlock in xfs_bmap_add_attrfork
  xfs: update maintainers