Currently we rely on the first byte of the Rx buffer to check if there's
any data available to be read. If the first byte of the received buffer
is zero (i.e. null character), then we fail to signal that data is
available even when it's available.

Instead introduce a boolean variable to track the data availability and
update it in the channel receive callback as ready and clear it when the
data is read.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Currently the mailbox framework sets txdone_method to TXDONE_BY_POLL if
the controller sets txdone_by_poll. However some clients can have a
mechanism to do TXDONE_BY_ACK which they can specify by knows_txdone.
However, we endup setting both TXDONE_BY_POLL and TXDONE_BY_ACK in that
case. In such scenario, we may end up with below warnings as the tx
ticker is run both by mailbox framework and the client.

WARNING: CPU: 1 PID: 0 at kernel/time/hrtimer.c:805 hrtimer_forward+0x88/0xd8
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.12.0-rc5 #242
Hardware name: ARM LTD ARM Juno Development Platform
task: ffff8009768ca700 task.stack: ffff8009768f8000
PC is at hrtimer_forward+0x88/0xd8
LR is at txdone_hrtimer+0xd4/0xf8
Call trace:
 hrtimer_forward+0x88/0xd8
 __hrtimer_run_queues+0xe4/0x158
 hrtimer_interrupt+0xa4/0x220
 arch_timer_handler_phys+0x30/0x40
 handle_percpu_devid_irq+0x78/0x130
 generic_handle_irq+0x24/0x38
 __handle_domain_irq+0x5c/0xb8
 gic_handle_irq+0x54/0xa8

This patch fixes the issue by resetting TXDONE_BY_POLL if client has set
knows_txdone.

Cc: Alexey Klimov <alexey.klimov@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

By default, we build Broadcom FlexRM driver as loadable module for
iProc SOCs so that kernel image is little smaller and we load FlexRM
driver only when required.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

This patch makes the comment header of Broadcom FlexRM driver
similar to the GPL comment header used across Broadcom driver
sources.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

The Broadcom FlexRM Mailbox is only present in the Broadcom IPROC SoCs.
Add depends on ARCH_BCM_IPROC to BCM_FLEXRX_MBOX.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

This patch updates all dev_err() and dev_warn() to print
ring number so that we have more info for debugging.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

As-per suggestion from FlexRM HW folks, we have to first set
FlexRM ring flush state and then clear it for FlexRM ring flush
to work properly.

Currently, the FlexRM driver has incomplete FlexRM ring flush
sequence which causes repeated insmod+rmmod of mailbox client
drivers to fail.

This patch fixes FlexRM ring flush sequence in flexrm_shutdown()
as described above.

Fixes: dbc049ee ("mailbox: Add driver for Broadcom FlexRM
ring manager")
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Pull rdma fix from Doug Ledford:
 "Fix an oops issue in the new RDMA netlink code"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  RDMA/netlink: OOPs in rdma_nl_rcv_msg() from misinterpreted flag

This reverts commit 651e28c5.

This caused a regression:
 "The specific problem is that dnsmasq refuses to start on openSUSE Leap
  42.2.  The specific cause is that and attempt to open a PF_LOCAL socket
  gets EACCES.  This means that networking doesn't function on a system
  with a 4.14-rc2 system."

Sadly, the developers involved seemed to be in denial for several weeks
about this, delaying the revert.  This has not been a good release for
the security subsystem, and this area needs to change development
practices.
Reported-and-bisected-by: James Bottomley <James.Bottomley@hansenpartnership.com>
Tracked-by: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull power management fix from Rafael Wysocki:
 "This fixes a device power management quality of service (PM QoS)
  framework implementation issue causing 'no restriction' requests for
  device resume latency, including 'no restriction' set by user space,
  to effectively override requests with specific device resume latency
  requirements.

  It is late in the cycle, but the bug in question is in the 'user space
  can trigger unexpected behavior' category and the fix is
  stable-candidate, so here it goes"

* tag 'pm-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / QoS: Fix device resume latency PM QoS

Pull block fixes from Jens Axboe:
 "A few select fixes that should go into this series. Mainly for NVMe,
  but also a single stable fix for nbd from Josef"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nbd: handle interrupted sendmsg with a sndtimeo set
  nvme-rdma: Fix error status return in tagset allocation failure
  nvme-rdma: Fix possible double free in reconnect flow
  nvmet: synchronize sqhd update
  nvme-fc: retry initial controller connections 3 times
  nvme-fc: fix iowait hang

Pull spi fixes from Mark Brown:
 "There are a bunch of device specific fixes (more than I'd like, I've
  been lax sending these) plus one important core fix for the conversion
  to use an IDR for bus number allocation which avoids issues with
  collisions when some but not all of the buses in the system have a
  fixed bus number specified.

  The Armada changes are rather large, specificially "spi: armada-3700:
  Fix padding when sending not 4-byte aligned data", but it's a storage
  corruption issue and there's things like indentation changes which
  make it look bigger than it really is. It's been cooking in -next for
  quite a while now and is part of the reason for the delay"

* tag 'spi-fix-v4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers
  spi: bcm-qspi: Fix use after free in bcm_qspi_probe() in error path
  spi: a3700: Return correct value on timeout detection
  spi: uapi: spidev: add missing ioctl header
  spi: stm32: Fix logical error in stm32_spi_prepare_mbr()
  spi: armada-3700: Fix padding when sending not 4-byte aligned data
  spi: armada-3700: Fix failing commands with quad-SPI

Pull ceph fix from Ilya Dryomov:
 "A small lock imbalance fix, marked for stable"

* tag 'ceph-for-4.14-rc7' of git://github.com/ceph/ceph-client:
  ceph: unlock dangling spinlock in try_flush_caps()

Pull xfs fix from Darrick Wong:
 "Here's (hopefully) the last bugfix for 4.14:

   - Rework nowait locking code to reduce locking overhead penalty"

* tag 'xfs-4.14-fixes-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix AIM7 regression

Merge tag 'hwmon-for-linus-v4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fix initial temperature readings for TMP102

 - Fix timeouts in DA9052 driver by increasing its sampling rate

* tag 'hwmon-for-linus-v4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (tmp102) Fix first temperature reading
  hwmon: (da9052) Increase sample rate when using TSI

Pull sound fixes from Takashi Iwai:
 "Just two HD-audio fixups for a recent Realtek codec model. It's pretty
  safe to apply (and unsurprisingly boring)"

* tag 'sound-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - fix headset mic problem for Dell machines with alc236
  ALSA: hda/realtek - Add support for ALC236/ALC3204

rdma_nl_rcv_msg() checks to see if it should use the .dump() callback
or the .doit() callback.  The check is done with this check:

if (flags & NLM_F_DUMP) ...

The NLM_F_DUMP flag is two bits (NLM_F_ROOT | NLM_F_MATCH).

When an RDMA_NL_LS message (response) is received, the bit used for
indicating an error is the same bit as NLM_F_ROOT.

NLM_F_ROOT == (0x100) == RDMA_NL_LS_F_ERR.

ibacm sends a response with the RDMA_NL_LS_F_ERR bit set if an error
occurs in the service.  The current code then misinterprets the
NLM_F_DUMP bit and trys to call the .dump() callback.

If the .dump() callback for the specified request is not available
(which is true for the RDMA_NL_LS messages) the following Oops occurs:

[ 4555.960256] BUG: unable to handle kernel NULL pointer dereference at
   (null)
[ 4555.969046] IP:           (null)
[ 4555.972664] PGD 10543f1067 P4D 10543f1067 PUD 1033f93067 PMD 0
[ 4555.979287] Oops: 0010 [#1] SMP
[ 4555.982809] Modules linked in: rpcrdma ib_isert iscsi_target_mod
target_core_mod ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_ucm
ib_uverbs ib_umad rdma_cm ib_cm iw_cm dm_mirror dm_region_hash dm_log dm_mod
dax sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass
crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd
glue_helper cryptd hfi1 rdmavt iTCO_wdt iTCO_vendor_support ib_core mei_me
lpc_ich pcspkr mei ioatdma sg shpchp i2c_i801 mfd_core wmi ipmi_si ipmi_devintf
ipmi_msghandler acpi_power_meter acpi_pad nfsd auth_rpcgss nfs_acl lockd grace
sunrpc ip_tables ext4 mbcache jbd2 sd_mod mgag200 drm_kms_helper syscopyarea
sysfillrect sysimgblt fb_sys_fops ttm igb ahci crc32c_intel ptp libahci
pps_core drm dca libata i2c_algo_bit i2c_core
[ 4556.061190] CPU: 54 PID: 9841 Comm: ibacm Tainted: G          I
4.14.0-rc2+ #6
[ 4556.069667] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS
SE5C610.86B.01.01.0008.021120151325 02/11/2015
[ 4556.081339] task: ffff880855f42d00 task.stack: ffffc900246b4000
[ 4556.087967] RIP: 0010:          (null)
[ 4556.092166] RSP: 0018:ffffc900246b7bc8 EFLAGS: 00010246
[ 4556.098018] RAX: ffffffff81dbe9e0 RBX: ffff881058bb1000 RCX:
0000000000000000
[ 4556.105997] RDX: 0000000000001100 RSI: ffff881058bb1320 RDI:
ffff881056362000
[ 4556.113984] RBP: ffffc900246b7bf8 R08: 0000000000000ec0 R09:
0000000000001100
[ 4556.121971] R10: ffff8810573a5000 R11: 0000000000000000 R12:
ffff881056362000
[ 4556.129957] R13: 0000000000000ec0 R14: ffff881058bb1320 R15:
0000000000000ec0
[ 4556.137945] FS:  00007fe0ba5a38c0(0000) GS:ffff88105f080000(0000)
knlGS:0000000000000000
[ 4556.147000] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4556.153433] CR2: 0000000000000000 CR3: 0000001056f5d003 CR4:
00000000001606e0
[ 4556.161419] Call Trace:
[ 4556.164167]  ? netlink_dump+0x12c/0x290
[ 4556.168468]  __netlink_dump_start+0x186/0x1f0
[ 4556.173357]  rdma_nl_rcv_msg+0x193/0x1b0 [ib_core]
[ 4556.178724]  rdma_nl_rcv+0xdc/0x130 [ib_core]
[ 4556.183604]  netlink_unicast+0x181/0x240
[ 4556.187998]  netlink_sendmsg+0x2c2/0x3b0
[ 4556.192392]  sock_sendmsg+0x38/0x50
[ 4556.196299]  SYSC_sendto+0x102/0x190
[ 4556.200308]  ? __audit_syscall_entry+0xaf/0x100
[ 4556.205387]  ? syscall_trace_enter+0x1d0/0x2b0
[ 4556.210366]  ? __audit_syscall_exit+0x209/0x290
[ 4556.215442]  SyS_sendto+0xe/0x10
[ 4556.219060]  do_syscall_64+0x67/0x1b0
[ 4556.223165]  entry_SYSCALL64_slow_path+0x25/0x25
[ 4556.228328] RIP: 0033:0x7fe0b9db2a63
[ 4556.232333] RSP: 002b:00007ffc55edc260 EFLAGS: 00000293 ORIG_RAX:
000000000000002c
[ 4556.240808] RAX: ffffffffffffffda RBX: 0000000000000010 RCX:
00007fe0b9db2a63
[ 4556.248796] RDX: 0000000000000010 RSI: 00007ffc55edc280 RDI:
000000000000000d
[ 4556.256782] RBP: 00007ffc55edc670 R08: 00007ffc55edc270 R09:
000000000000000c
[ 4556.265321] R10: 0000000000000000 R11: 0000000000000293 R12:
00007ffc55edc280
[ 4556.273846] R13: 000000000260b400 R14: 000000000000000d R15:
0000000000000001
[ 4556.282368] Code:  Bad RIP value.
[ 4556.286629] RIP:           (null) RSP: ffffc900246b7bc8
[ 4556.293013] CR2: 0000000000000000
[ 4556.297292] ---[ end trace 8d67abcfd10ec209 ]---
[ 4556.305465] Kernel panic - not syncing: Fatal exception
[ 4556.313786] Kernel Offset: disabled
[ 4556.321563] ---[ end Kernel panic - not syncing: Fatal exception
[ 4556.328960] ------------[ cut here ]------------

Special case RDMA_NL_LS response messages to call the appropriate
callback.

Additionally, make sure that the .dump() callback is not NULL
before calling it.

Fixes: 647c75ac ("RDMA/netlink: Convert LS to doit callback")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Merge remote-tracking branches 'spi/fix/armada', 'spi/fix/idr', 'spi/fix/qspi', 'spi/fix/stm32' and 'spi/fix/uapi' into spi-linus

sparse warns:

  fs/ceph/caps.c:2042:9: warning: context imbalance in 'try_flush_caps' - wrong count at exit

We need to exit this function with the lock unlocked, but a couple of
cases leave it locked.

Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Pull NFS client bugfixes from Trond Myklebust:

 - Fix a list corruption in xprt_release()

 - Fix a workqueue lockdep warning due to unsafe use of
   cancel_work_sync()

* tag 'nfs-for-4.14-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Destroy transport from the system workqueue
  SUNRPC: fix a list corruption issue in xprt_release()

If you do not set sk_sndtimeo you will get -ERESTARTSYS if there is a
pending signal when you enter sendmsg, which we handle properly.
However if you set a timeout for your commands we'll set sk_sndtimeo to
that timeout, which means that sendmsg will start returning -EINTR
instead of -ERESTARTSYS.  Fix this by checking either cases and doing
the correct thing.

Cc: stable@vger.kernel.org
Fixes: dc88e34d ("nbd: set sk->sk_sndtimeo for our sockets")
Reported-and-tested-by: Daniel Xu <dlxu@fb.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull KVM fixes from Radim Krčmář:
 "PPC fixes for potential host oops and hangs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S HV: Add more barriers in XIVE load/unload code
  KVM: PPC: Book3S: Protect kvmppc_gpa_to_ua() with SRCU
  KVM: PPC: Book3S HV: POWER9 more doorbell fixes
  KVM: PPC: Fix oops when checking KVM_CAP_PPC_HTM

The special value of 0 for device resume latency PM QoS means
"no restriction", but there are two problems with that.

First, device resume latency PM QoS requests with 0 as the
value are always put in front of requests with positive
values in the priority lists used internally by the PM QoS
framework, causing 0 to be chosen as an effective constraint
value.  However, that 0 is then interpreted as "no restriction"
effectively overriding the other requests with specific
restrictions which is incorrect.

Second, the users of device resume latency PM QoS have no
way to specify that *any* resume latency at all should be
avoided, which is an artificial limitation in general.

To address these issues, modify device resume latency PM QoS to
use S32_MAX as the "no constraint" value and 0 as the "no
latency at all" one and rework its users (the cpuidle menu
governor, the genpd QoS governor and the runtime PM framework)
to follow these changes.

Also add a special "n/a" value to the corresponding user space I/F
to allow user space to indicate that it cannot accept any resume
latencies at all for the given device.

Fixes: 85dc0b8a (PM / QoS: Make it possible to expose PM QoS latency constraints)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197323Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alex Shi <alex.shi@linaro.org>
Cc: All applicable <stable@vger.kernel.org>

Commit 3d8f7a89 ("hwmon: (tmp102) Improve handling of initial read
delay") reduced the initial temperature read delay and made it dependent
on the chip's shutdown mode. If the chip was not in shutdown mode at probe,
the read delay no longer applies.

This ignores the fact that the chip initialization changes the temperature
sensor resolution, and that the temperature register values change when
the resolution is changed. As a result, the reported temperature is twice
as high as the real temperature until the first temperature conversion
after the configuration change is complete. This can result in unexpected
behavior and, worst case, in a system shutdown. To fix the problem,
let's just always wait for a conversion to complete before reporting
a temperature.

Fixes: 3d8f7a89 ("hwmon: (tmp102) Improve handling of initial read delay")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197167Reported-by: Ralf Goebel <ralf.goebel@imago-technologies.com>
Cc: Ralf Goebel <ralf.goebel@imago-technologies.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

We have several Dell laptops which use the codec alc236, the headset
mic can't work on these machines. Following the commit 736f20a7, we
add the pin cfg table to make the headset mic work.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Apparently our current rwsem code doesn't like doing the trylock, then
lock for real scheme.  So change our read/write methods to just do the
trylock for the RWF_NOWAIT case.  This fixes a ~25% regression in
AIM7.

Fixes: 91f9943e ("fs: support RWF_NOWAIT for buffered reads")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Pull x86 platform driver fixes from Darren Hart:
 "Use a spin_lock instead of mutex in atomic context. The devm_ fix is a
  dependency. Summary:

  intel_pmc_ipc:
   - Use spin_lock to protect GCR updates
   - Use devm_* calls in driver probe function"

* tag 'platform-drivers-x86-v4.14-3' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: intel_pmc_ipc: Use spin_lock to protect GCR updates
  platform/x86: intel_pmc_ipc: Use devm_* calls in driver probe function

Currently, update_no_reboot_bit() function implemented in this driver
uses mutex_lock() to protect its register updates. But this function is
called with in atomic context in iTCO_wdt_start() and iTCO_wdt_stop()
functions in iTCO_wdt.c driver, which in turn causes "sleeping into
atomic context" issue. This patch fixes this issue by replacing the
mutex_lock() with spin_lock() to protect the GCR read/write/update APIs.

Fixes: 9d855d46 ("platform/x86: intel_pmc_ipc: Fix iTCO_wdt GCS memory mapping failure")
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kupuswamy@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This patch cleans up unnecessary free/alloc calls in ipc_plat_probe(),
ipc_pci_probe() and ipc_plat_get_res() functions by using devm_*
calls.

This patch also adds proper error handling for failure cases in
ipc_pci_probe() function.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
[andy: fixed style issues, missed devm_free_irq(), removed unnecessary log message]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull workqueue fix from Tejun Heo:
 "This is a fix for an old bug in workqueue. Workqueue used a mutex to
  arbitrate who gets to be the manager of a pool. When the manager role
  gets released, the mutex gets unlocked while holding the pool's
  irqsafe spinlock. This can lead to deadlocks as mutex's internal
  spinlock isn't irqsafe. This got discovered by recent fixes to mutex
  lockdep annotations.

  The fix is a bit invasive for rc6 but if anything were wrong with the
  fix it would likely have already blown up in -next, and we want the
  fix in -stable anyway"

* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: replace pool->manager_arb mutex with a flag

Pull pin control fixes from Linus Walleij:
 "Two last minute fixes for pin controllers, both regressions in
  specific drivers:

   - Fix a touchpad pin control issue on the AMD affecting Asus laptops

   - Fix an interrupt handling regression on the MCP23s08"

* tag 'pinctrl-v4.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mcp23s08: fix interrupt handling regression
  pinctrl/amd: fix masking of GPIO interrupts

Merge tag 'regulator-fix-v4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A couple of small driver specific bug fixes that have been collected
  since the merge window"

* tag 'regulator-fix-v4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: rn5t618: Do not index regulator_desc arrays by id
  regulator: axp20x: Fix poly-phase bit offset for AXP803 DCDC5/6

Pull staging and IIO fixes from Greg KH:
 "Here are a small number of patches to resolve some reported IIO and a
  staging driver problem. Nothing major here, full details are in the
  shortlog below.

  All have been in linux-next with no reported issues"

* tag 'staging-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: bcm2835-audio: Fix memory corruption
  iio: adc: at91-sama5d2_adc: fix probe error on missing trigger property
  iio: adc: dln2-adc: fix build error
  iio: dummy: events: Add missing break
  staging: iio: ade7759: fix signed extension bug on shift of a u8
  iio: pressure: zpa2326: Remove always-true check which confuses gcc
  iio: proximity: as3935: noise detection + threshold changes

Pull char/misc driver fixes from Greg KH:
 "Here are four small fixes for 4.14-rc6.

  Three of them are binder driver fixes for reported issues, and the
  last one is a hyperv driver bugfix. Nothing major, but good fixes to
  get into 4.14-final.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  android: binder: Fix null ptr dereference in debug msg
  android: binder: Don't get mm from task
  vmbus: hvsock: add proper sync for vmbus_hvsock_device_unregister()
  binder: call poll_wait() unconditionally.

Pull USB/PHY fixes from Greg KH:
 "Here are a small number of USB and PHY driver fixes for 4.14-rc6

  There is the usual musb and xhci fixes in here, as well as some needed
  phy patches. Also is a nasty regression fix for usbfs that has started
  to hit a lot of people using virtual machines.

  All of these have been in linux-next with no reported problems"

* tag 'usb-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  usb: hub: Allow reset retry for USB2 devices on connect bounce
  USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor()
  MAINTAINERS: fix git tree url for musb module
  usb: quirks: add quirk for WORLDE MINI MIDI keyboard
  usb: musb: sunxi: Explicitly release USB PHY on exit
  usb: musb: Check for host-mode using is_host_active() on reset interrupt
  usb: musb: musb_cppi41: Configure the number of channels for DA8xx
  usb: musb: musb_cppi41: Fix cppi41_set_dma_mode() for DA8xx
  usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers
  USB: musb: fix late external abort on suspend
  USB: musb: fix session-bit runtime-PM quirk
  usb: cdc_acm: Add quirk for Elatec TWN3
  USB: devio: Revert "USB: devio: Don't corrupt user memory"
  usb: xhci: Handle error condition in xhci_stop_device()
  usb: xhci: Reset halted endpoint if trb is noop
  xhci: Cleanup current_cmd in xhci_cleanup_command_queue()
  xhci: Identify USB 3.1 capable hosts by their port protocol capability
  USB: serial: metro-usb: add MS7820 device id
  phy: rockchip-typec: Check for errors from tcphy_phy_init()
  phy: rockchip-typec: Don't set the aux voltage swing to 400 mV
  ...

Merge remote-tracking branches 'regulator/fix/axp20x' and 'regulator/fix/rn5t618' into regulator-linus

Pull input fix from Dmitry Torokhov:
 "A fix for a broken commit in the previous pull breaking automatic
  module loading of input handlers, such ad evdev"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: do not use property bits when generating module alias

The commit 8724ecb0 ("Input: allow matching device IDs on property
bits") started using property bits when generating module aliases for input
handlers, but did not adjust the generation of MODALIAS attribute on input
device uevents, breaking automatic module loading. Given that no handler
currently uses property bits in their module tables, let's revert this part
of the commit for now.
Reported-by: Damien Wyart <damien.wyart@gmail.com>
Tested-by: Damien Wyart <damien.wyart@gmail.com>
Fixes: 8724ecb0 ("Input: allow matching device IDs on property bits")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull x86 fixes from Thomas Gleixner:
 "A couple of fixes addressing the following issues:

   - The last polishing for the TLB code, removing the last BUG_ON() and
     the debug file along with tidying up the lazy TLB code.

   - Prevent triple fault on 1st Gen. 486 caused by stupidly calling the
     early IDT setup after the first function which causes a fault which
     should be caught by the exception table.

   - Limit the mmap of /dev/mem to valid addresses

   - Prevent late microcode loading on Broadwell X

   - Remove a redundant assignment in the cache info code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Limit mmap() of /dev/mem to valid physical addresses
  x86/mm: Remove debug/x86/tlb_defer_switch_to_init_mm
  x86/mm: Tidy up "x86/mm: Flush more aggressively in lazy TLB mode"
  x86/mm/64: Remove the last VM_BUG_ON() from the TLB code
  x86/microcode/intel: Disable late loading on model 79
  x86/idt: Initialize early IDT before cr4_init_shadow()
  x86/cpu/intel_cacheinfo: Remove redundant assignment to 'this_leaf'