- 02 Jul, 2020 10 commits
-
-
Wenhui Sheng authored
After we move request full access before set ip blocks, we can merge atombios init block of SRIOV and baremetal together. Signed-off-by:
Wenhui Sheng <Wenhui.Sheng@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Wenhui Sheng authored
From SIENNA_CICHLID, HW introduce a new protection feature which can control the FB, doorbell and MMIO write access for VF, so guest driver should request full access before ip discovery, or we couldn't access ip discovery data in FB. Signed-off-by:
-
Wenhui Sheng authored
Init soc15 reg base early enough so we can touch mailbox related registers in request full access for sriov before set_ip_blocks, vi&nv arch doesn't use reg base in virt ops. v2: fix reg_base_init missed in bare metal case. Signed-off-by:
-
Wenhui Sheng authored
Move request init data to virt detection func, so we can insert request full access between request init data and set ip blocks. Signed-off-by:
-
Felix Kuehling authored
When there is no graphics support, KFD can use more of the VMIDs. Graphics VMIDs are only used for video decoding/encoding and post processing. With two VCE engines, there is no reason to reserve more than 2 VMIDs for that. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Felix Kuehling authored
The KFD VMID assignment was hard-coded in a few places. Consolidate that in a single variable adev->vm_manager.first_kfd_vmid. The value is still assigned in gmc-ip-version-specific code. Signed-off-by:
-
Alex Jivin authored
Port functionality from the Radeon driver to support UVD and VCE power management. Signed-off-by:
Alex Jivin <alex.jivin@amd.com> Reviewed-by:
-
Alex Jivin authored
Port functionality from the Radeon driver to support VCE clock control. Signed-off-by:
-
Alex Jivin authored
Port functionality from the Radeon driver to support UVD clock control. Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.9-2020-07-01: amdgpu: - DC DMUB updates - HDCP fixes - Thermal interrupt fixes - Add initial support for Sienna Cichlid GPU - Add support for unique id on Arcturus - Major swSMU code cleanup - Skip BAR resizing if the bios already did id - Fixes for DCN bandwidth calculations - Runtime PM reference count fixes - Add initial UVD support for SI - Add support for ASSR on eDP links - Lots of misc fixes and cleanups - Enable runtime PM on vega10 boards that support BACO - RAS fixes - SR-IOV fixes - Use IP discovery table on renoir - DC stream synchronization fixes amdkfd: - Track SDMA usage per process - Fix GCC10 compiler warnings - Locking fix radeon: - Default to on chip GART for AGP boards on all arches - Runtime PM reference count fixes UAPI: - Update comments to clarify MTYPE From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701155041.1102829-1-alexander.deucher@amd.comSigned-off-by:
Dave Airlie <airlied@redhat.com>
-
- 01 Jul, 2020 30 commits
-
-
Ivan Mironov authored
I updated my system with Radeon VII from kernel 5.6 to kernel 5.7, and following started to happen on each boot: ... BUG: kernel NULL pointer dereference, address: 0000000000000128 ... CPU: 9 PID: 1940 Comm: modprobe Tainted: G E 5.7.2-200.im0.fc32.x86_64 #1 Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 1407 04/02/2020 RIP: 0010:lock_bus+0x42/0x60 [amdgpu] ... Call Trace: i2c_smbus_xfer+0x3d/0xf0 i2c_default_probe+0xf3/0x130 i2c_detect.isra.0+0xfe/0x2b0 ? kfree+0xa3/0x200 ? kobject_uevent_env+0x11f/0x6a0 ? i2c_detect.isra.0+0x2b0/0x2b0 __process_new_driver+0x1b/0x20 bus_for_each_dev+0x64/0x90 ? 0xffffffffc0f34000 i2c_register_driver+0x73/0xc0 do_one_initcall+0x46/0x200 ? _cond_resched+0x16/0x40 ? kmem_cache_alloc_trace+0x167/0x220 ? do_init_module+0x23/0x260 do_init_module+0x5c/0x260 __do_sys_init_module+0x14f/0x170 do_syscall_64+0x5b/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... Error appears when some i2c device driver tries to probe for devices using adapter registered by `smu_v11_0_i2c_eeprom_control_init()`. Code supporting this adapter requires `adev->psp.ras.ras` to be not NULL, which is true only when `amdgpu_ras_init()` detects HW support by calling `amdgpu_ras_check_supported()`. Before 9015d60c, adapter was registered by -> amdgpu_device_ip_init() -> amdgpu_ras_recovery_init() -> amdgpu_ras_eeprom_init() -> smu_v11_0_i2c_eeprom_control_init() after verifying that `adev->psp.ras.ras` is not NULL in `amdgpu_ras_recovery_init()`. Currently it is registered unconditionally by -> amdgpu_device_ip_init() -> pp_sw_init() -> hwmgr_sw_init() -> vega20_smu_init() -> smu_v11_0_i2c_eeprom_control_init() Fix simply adds HW support check (ras == NULL => no support) before calling `smu_v11_0_i2c_eeprom_control_{init,fini}()`. Please note that there is a chance that similar fix is also required for CHIP_ARCTURUS. I do not know whether any actual Arcturus hardware without RAS exist, and whether calling `smu_i2c_eeprom_init()` makes any sense when there is no HW support. Cc: stable@vger.kernel.org Fixes: 9015d60c ("drm/amdgpu: Move EEPROM I2C adapter to amdgpu_device") Signed-off-by:
Ivan Mironov <mironov.ivan@gmail.com> Tested-by:
Bjorn Nostvold <bjorn.nostvold@gmail.com> Signed-off-by:
-
Alex Deucher authored
The failures with ROCm only happen with noretry=1, so enable runtime pm when noretry=0 (the current default). Reviewed-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by:
-
Alex Deucher authored
Add a switch statement to simplify asic checks. Note that BACO is not supported on APUs, so there is no need to check them. Reviewed-by:
-
Nirmoy Das authored
The release_firmware() function is NULL tolerant so we do not need to check for NULL param before calling it. Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
-
Mukul Joshi authored
[ 150.887733] ====================================================== [ 150.893903] WARNING: possible circular locking dependency detected [ 150.905917] ------------------------------------------------------ [ 150.912129] kfdtest/4081 is trying to acquire lock: [ 150.917002] ffff8f7f3762e118 (&mm->mmap_sem#2){++++}, at: __might_fault+0x3e/0x90 [ 150.924490] but task is already holding lock: [ 150.930320] ffff8f7f49d229e8 (&dqm->lock_hidden){+.+.}, at: destroy_queue_cpsch+0x29/0x210 [amdgpu] [ 150.939432] which lock already depends on the new lock. [ 150.947603] the existing dependency chain (in reverse order) is: [ 150.955074] -> #3 (&dqm->lock_hidden){+.+.}: [ 150.960822] __mutex_lock+0xa1/0x9f0 [ 150.964996] evict_process_queues_cpsch+0x22/0x120 [amdgpu] [ 150.971155] kfd_process_evict_queues+0x3b/0xc0 [amdgpu] [ 150.977054] kgd2kfd_quiesce_mm+0x25/0x60 [amdgpu] [ 150.982442] amdgpu_amdkfd_evict_userptr+0x35/0x70 [amdgpu] [ 150.988615] amdgpu_mn_invalidate_hsa+0x41/0x60 [amdgpu] [ 150.994448] __mmu_notifier_invalidate_range_start+0xa4/0x240 [ 151.000714] copy_page_range+0xd70/0xd80 [ 151.005159] dup_mm+0x3ca/0x550 [ 151.008816] copy_process+0x1bdc/0x1c70 [ 151.013183] _do_fork+0x76/0x6c0 [ 151.016929] __x64_sys_clone+0x8c/0xb0 [ 151.021201] do_syscall_64+0x4a/0x1d0 [ 151.025404] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 151.030977] -> #2 (&adev->notifier_lock){+.+.}: [ 151.036993] __mutex_lock+0xa1/0x9f0 [ 151.041168] amdgpu_mn_invalidate_hsa+0x30/0x60 [amdgpu] [ 151.047019] __mmu_notifier_invalidate_range_start+0xa4/0x240 [ 151.053277] copy_page_range+0xd70/0xd80 [ 151.057722] dup_mm+0x3ca/0x550 [ 151.061388] copy_process+0x1bdc/0x1c70 [ 151.065748] _do_fork+0x76/0x6c0 [ 151.069499] __x64_sys_clone+0x8c/0xb0 [ 151.073765] do_syscall_64+0x4a/0x1d0 [ 151.077952] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 151.083523] -> #1 (mmu_notifier_invalidate_range_start){+.+.}: [ 151.090833] change_protection+0x802/0xab0 [ 151.095448] mprotect_fixup+0x187/0x2d0 [ 151.099801] setup_arg_pages+0x124/0x250 [ 151.104251] load_elf_binary+0x3a4/0x1464 [ 151.108781] search_binary_handler+0x6c/0x210 [ 151.113656] __do_execve_file.isra.40+0x7f7/0xa50 [ 151.118875] do_execve+0x21/0x30 [ 151.122632] call_usermodehelper_exec_async+0x17e/0x190 [ 151.128393] ret_from_fork+0x24/0x30 [ 151.132489] -> #0 (&mm->mmap_sem#2){++++}: [ 151.138064] __lock_acquire+0x11a1/0x1490 [ 151.142597] lock_acquire+0x90/0x180 [ 151.146694] __might_fault+0x68/0x90 [ 151.150879] read_sdma_queue_counter+0x5f/0xb0 [amdgpu] [ 151.156693] update_sdma_queue_past_activity_stats+0x3b/0x90 [amdgpu] [ 151.163725] destroy_queue_cpsch+0x1ae/0x210 [amdgpu] [ 151.169373] pqm_destroy_queue+0xf0/0x250 [amdgpu] [ 151.174762] kfd_ioctl_destroy_queue+0x32/0x70 [amdgpu] [ 151.180577] kfd_ioctl+0x223/0x400 [amdgpu] [ 151.185284] ksys_ioctl+0x8f/0xb0 [ 151.189118] __x64_sys_ioctl+0x16/0x20 [ 151.193389] do_syscall_64+0x4a/0x1d0 [ 151.197569] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 151.203141] other info that might help us debug this: [ 151.211140] Chain exists of: &mm->mmap_sem#2 --> &adev->notifier_lock --> &dqm->lock_hidden [ 151.222535] Possible unsafe locking scenario: [ 151.228447] CPU0 CPU1 [ 151.232971] ---- ---- [ 151.237502] lock(&dqm->lock_hidden); [ 151.241254] lock(&adev->notifier_lock); [ 151.247774] lock(&dqm->lock_hidden); [ 151.254038] lock(&mm->mmap_sem#2); This commit fixes the warning by ensuring get_user() is not called while reading SDMA stats with dqm_lock held as get_user() could cause a page fault which leads to the circular locking scenario. Signed-off-by:Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
-
Colin Ian King authored
There is an off-by-one bounds check on the index into arrays table->mc_reg_address and table->mc_reg_table_entry[k].mc_data[j] that can lead to reads and writes outside of arrays. Fix the bound checking off-by-one error. Addresses-Coverity: ("Out-of-bounds read/write") Fixes: cc8dbbb4 ("drm/radeon: add dpm support for CI dGPUs (v2)") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
In the cases where adev->jpeg.num_jpeg_inst is zero or the condition adev->jpeg.harvest_config & (1 << i) is always non-zero the variable ret is never set to an error condition and the function returns an uninitialized value in ret. Since the only exit condition at the end if the function is a success then explicitly return 0 rather than a potentially uninitialized value in ret. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 14f43e8f ("drm/amdgpu: move JPEG2.5 out from VCN2.5") Signed-off-by: -
Alex Deucher authored
This includes older APUs like renoir. Acked-by:
-
John van der Kamp authored
Make sure we pass through ret label to unlock the mutex. Signed-off-by:
John van der Kamp <sjonny@suffe.me.uk> Signed-off-by:
-
Bernard Zhao authored
The function kobject_init_and_add alloc memory like: kobject_init_and_add->kobject_add_varg->kobject_set_name_vargs ->kvasprintf_const->kstrdup_const->kstrdup->kmalloc_track_caller ->kmalloc_slab, in err branch this memory not free. If use kmemleak, this path maybe catched. These changes are to add kobject_put in kobject_init_and_add failed branch, fix potential memleak. Signed-off-by:
Bernard Zhao <bernard@vivo.com> Reviewed-by:
-
Denis Efremov authored
clk_s is checked twice in a row in ni_init_smc_spll_table(). fb_div should be checked instead. Fixes: 69e0b57a ("drm/radeon/kms: add dpm support for cayman (v5)") Cc: stable@vger.kernel.org Signed-off-by:
Denis Efremov <efremov@linux.com> Signed-off-by:
-
Nirmoy Das authored
This fixes incorrect output when reading pp_dpm_dcefclk sysfs. Output before this patch: cat /sys/devices/pci0000:<snip>/pp_dpm_dcefclk 0: 506Mhz 1: 42949671Mhz * 2: 1266Mhz v2: squash in arcturus fix Signed-off-by:
-
Nirmoy Das authored
If (smu)->ppt_funcs->intf is not initialized then smu_send_smc_msg(smu, SMU_MSG_ReadSerialNumBottom32, &bottom32) and smu_send_smc_msg(smu, SMU_MSG_ReadSerialNumTop32, &top32) will not touch bottom32 and top32. Signed-off-by:
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Stylon Wang authored
[Why] Regression was introduced where setting max bpc property has no effect on the atomic check and final commit. It has the same effect as max bpc being stuck at 8. [How] Correctly propagate max bpc with the new connector state. Signed-off-by:
Stylon Wang <stylon.wang@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
-
Anthony Koo authored
[Header Changes] - Add debug flag for psr to use hw locking mgr state machine Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Wenjing Liu authored
[why] DP link layer CTS specs updated to change the test parameters in test 4.2.1.1. Before it requires source to delay 400us on aux no reply. With the specs updates Errata5, it requires source to delay 3.2ms (based on LTTPR aux timeout) This causes our test to fail after updating with the latest test equipment firmware. [how] the change is to allow LTTPR 3.2ms aux timeout delay by default. And set back to 400us if LTTPR feature is not enabled. We will set 3.2ms and always enable LTTPR non transparent mode if LTTPR feature is enabled and LTTPR is present. Signed-off-by:
Wenjing Liu <wenjing.liu@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by:
-
Wenjing Liu authored
[why] Two issues: 1. Add read only operation support for query ddc data over aux. 2. Fix a bug where if read size is multiple of 16, mot of the last read transaction will not be set to 0. Signed-off-by:
-
David Galiffi authored
[Why] If the front porch of the two timings differ, then there may not be enough time while both streams are in vertical blank to perform a memory clock change. This can hang the system. [How] Check the each streams timing.v_front_porch when determining if the two streams are synchronizable. Signed-off-by:
David Galiffi <David.Galiffi@amd.com> Reviewed-by:
-
Martin Leung authored
why: seamless boots requires split of init_hw into hw and pipes to work. This was implemented in dcn10_init_hw but did not apply yet to dcn30. how: Copy over dcn10_init_hw and adapt it to dcn30 using recent changes to dcn3. Behavior will be different in init sequence. Signed-off-by:
Martin Leung <martin.leung@amd.com> Reviewed-by:
-
Peikang Zhang authored
[Why] We try to to change new_clocks->dppclk_khz to 100000 when new_clocks->dppclk_khz is 0 [How] Don't change new_clocks->dppclk_khz value when new_clocks->dppclk_khz is 0 Signed-off-by:
Peikang Zhang <peikang.zhang@amd.com> Reviewed-by:
Yongqiang Sun <yongqiang.sun@amd.com> Acked-by:
-
Chris Park authored
[Why] 10K YCbCr420 does not need ODM 4:1, but it requires MPC 4 split indicated on the flags. [How] Make pixel encoding and resolution size specific workaround to enable ODM combine on YCbCr420 high resolution modes. Signed-off-by:
Chris Park <Chris.Park@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
-
Derek Lai authored
[why] If a typeC to HDMI dongle supports YCbCr420 pass through and VSC colorimetry and pixel encoding formats in the Extended Receiver Capability, we shall allow VSC SDP to be used. [How] The Extended Receiver Capability field shall check the EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT bit in the TRAINING_AUX_RD_INTERVAL register. Removed DPCD rev checking for VSC SDP. Signed-off-by:
Derek Lai <Derek.Lai@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] DMCUB firmware version is now available from firmware metadata block. We should be passing this into dmub_srv so we can know when to apply firmware version specific functionality like using CW4 only instead of the REGION4. [How] We don't have the helpers for DM to actually extract out firmware metadata block themselves. We could add that and add helpers in DM to grab this, but not every creation sequence has firmware instruction before dmub_srv_create. Easiest way to handle this is to fill this in automatically per DM in the place we do have it - when calculating the region parameters. But only fill it in if DM already hasn't in case we need to override with a specific version. We aren't do anything firmware version specific in dmub_srv_create today that does require fw_version, so while it's a little unituitive to do it when calculating region parameters it works for now. Signed-off-by:
-
Stylon Wang authored
[Why] Connector property output_bpc is available on DP/eDP only. New IGT tests would benifit if this property works on HDMI. [How] Enable this read-only property on all types of connectors. Signed-off-by:
-
Chris Park authored
[Why] All YCbCr420 resolutions 5K and above have tiling and discoloration issues. The issue can be remedied by forcing ODM combine from 5K to 8K. 10K resolution requires ODM 4:1. The mechanism of what the real problem is, that is inherent in ODM combine programming, doesn't seem to be pointed at singular register programming (CLK, MPC, DCSURF, etc.), and needs more in-depth programming sequence review for these new use case scenarios. Until then, workaround to enable ODM combine is proposed. While it is not our policy, HW spreadsheet also recommends turning on ODM for these scenario to lower the voltage. [How] Make pixel encoding and resolution size specific workaround to enable ODM combine on YCbCr420 high resolution modes. Signed-off-by:
-
Dmytro Laktyushkin authored
Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by:
-
Brandon Syu authored
[Why] There is using pixelclk AVFS for dppclk, that would cause issue. [How] To use dispclk AVFS for both dispclk and dppclk. There would choose dppclk for request voltage when dispclk wouldn't be updated case. If dispclk need to be updated, then it'll choose the bigger one from dppclk and dispclk for request voltage. Signed-off-by:
Brandon Syu <Brandon.Syu@amd.com> Reviewed-by:
-
Eric Yang authored
[Why] If optimized init is done in FW. DCN init be skipped in driver. This need to be communicated between driver and fw and maintain backwards compatibility. [How] Use DMUB scratch 0 bit 2 to indicate optimized init done in fw and use DMUB scatch 4 bit 0 to indicate drive supports the optimized flow so FW will perform it. Signed-off-by:
Eric Yang <Eric.Yang2@amd.com> Reviewed-by:
-
Dale Zhao authored
[WHY] Check max_tmds_clk_mhz firstly will restrict pixel clock under HDMI 1.4, thus HDMI2.0 port can't correctly support 4K 60Hz. [HOW] Fine tune the logic to check max_forum_tmds_clk_mhz firstly. Signed-off-by:
Dale Zhao <dale.zhao@amd.com> Reviewed-by:
-
