- 03 Dec, 2015 27 commits
-
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2015-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A small set of fixes for 4.4: * fix scanning in mac80211 to not actively scan radar channels (from Antonio) * fix uninitialized variable in remain-on-channel that could lead to treating frame TX as remain-on-channel and not sending the frame at all * remove NL80211_FEATURE_FULL_AP_CLIENT_STATE again, it was broken and needs more work, we'll enable it later * fix call_rcu() induced use-after-reset/free in mesh (that was suddenly causing issues in certain tests) * always request block-ack window size 64 as we found some APs will otherwise crash (really ...) * fix P2P-Device teardown sequence to avoid restarting with uninitialized data ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jérôme Pouiller authored
It is possible to address another chip on same MDIO bus. The case is correctly handled for media advertising. It is taken into account only if mii_data->phy_id == phydev->addr. However, this condition was missing for reset case. Signed-off-by:
Jérôme Pouiller <jezz@sysmic.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: set mac address and uc_list bug fixes. Fix ndo_set_mac_address() for PF and VF. Re-apply uc_list after chip reset. v2: Fix compile error if CONFIG_BNXT_SRIOV is not set. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Call bnxt_cfg_rx_mode() in bnxt_init_chip() to setup uc_list and mc_list mac address filters. Before the patch, uc_list is not setup again after chip reset (such as ethtool ring size change) and macvlans don't work any more after that. Modify bnxt_cfg_rx_mode() to return error codes appropriately so that the init chip sequence can detect any failures. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jeffrey Huang authored
For PF, the bp->pf.mac_addr always holds the permanent MAC addr assigned by the HW. For VF, the bp->vf.mac_addr always holds the administrator assigned VF MAC addr. The random generated VF MAC addr should never get stored to bp->vf.mac_addr. This way, when the VF wants to change the MAC address, we can tell if the adminstrator has already set it and disallow the VF from changing it. v2: Fix compile error if CONFIG_BNXT_SRIOV is not set. Signed-off-by:
Jeffrey Huang <huangjw@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jeffrey Huang authored
The existing ndo_set_mac_address only copies the new MAC addr and didn't set the new MAC addr to the HW. The correct way is to delete the existing default MAC filter from HW and add the new one. Because of RFS filters are also dependent on the default mac filter l2 context, the driver must go thru close_nic() to delete the default MAC and RFS filters, then open_nic() to set the default MAC address to HW. Signed-off-by:
Jeffrey Huang <huangjw@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Zapolskiy authored
If the driver is used on an ARM platform with SPARSE_IRQ defined, semantics of NR_IRQS is different (minimal value of virtual irqs) and by default it is set to 16, see arch/arm/include/asm/irq.h. This value may be less than the actual number of virtual irqs, which may break the driver initialization. The check removal allows to use the driver on such a platform, and, if irq controller driver works correctly, the check is not needed on legacy platforms. Fixes a runtime problem: lpc-eth 31060000.ethernet: error getting resources. lpc_eth: lpc-eth: not found (-6). Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
qdisc_tree_decrease_qlen() suffers from two problems on multiqueue devices. One problem is that it updates sch->q.qlen and sch->qstats.drops on the mq/mqprio root qdisc, while it should not : Daniele reported underflows errors : [ 681.774821] PAX: sch->q.qlen: 0 n: 1 [ 681.774825] PAX: size overflow detected in function qdisc_tree_decrease_qlen net/sched/sch_api.c:769 cicus.693_49 min, count: 72, decl: qlen; num: 0; context: sk_buff_head; [ 681.774954] CPU: 2 PID: 19 Comm: ksoftirqd/2 Tainted: G O 4.2.6.201511282239-1-grsec #1 [ 681.774955] Hardware name: ASUSTeK COMPUTER INC. X302LJ/X302LJ, BIOS X302LJ.202 03/05/2015 [ 681.774956] ffffffffa9a04863 0000000000000000 0000000000000000 ffffffffa990ff7c [ 681.774959] ffffc90000d3bc38 ffffffffa95d2810 0000000000000007 ffffffffa991002b [ 681.774960] ffffc90000d3bc68 ffffffffa91a44f4 0000000000000001 0000000000000001 [ 681.774962] Call Trace: [ 681.774967] [<ffffffffa95d2810>] dump_stack+0x4c/0x7f [ 681.774970] [<ffffffffa91a44f4>] report_size_overflow+0x34/0x50 [ 681.774972] [<ffffffffa94d17e2>] qdisc_tree_decrease_qlen+0x152/0x160 [ 681.774976] [<ffffffffc02694b1>] fq_codel_dequeue+0x7b1/0x820 [sch_fq_codel] [ 681.774978] [<ffffffffc02680a0>] ? qdisc_peek_dequeued+0xa0/0xa0 [sch_fq_codel] [ 681.774980] [<ffffffffa94cd92d>] __qdisc_run+0x4d/0x1d0 [ 681.774983] [<ffffffffa949b2b2>] net_tx_action+0xc2/0x160 [ 681.774985] [<ffffffffa90664c1>] __do_softirq+0xf1/0x200 [ 681.774987] [<ffffffffa90665ee>] run_ksoftirqd+0x1e/0x30 [ 681.774989] [<ffffffffa90896b0>] smpboot_thread_fn+0x150/0x260 [ 681.774991] [<ffffffffa9089560>] ? sort_range+0x40/0x40 [ 681.774992] [<ffffffffa9085fe4>] kthread+0xe4/0x100 [ 681.774994] [<ffffffffa9085f00>] ? kthread_worker_fn+0x170/0x170 [ 681.774995] [<ffffffffa95d8d1e>] ret_from_fork+0x3e/0x70 mq/mqprio have their own ways to report qlen/drops by folding stats on all their queues, with appropriate locking. A second problem is that qdisc_tree_decrease_qlen() calls qdisc_lookup() without proper locking : concurrent qdisc updates could corrupt the list that qdisc_match_from_root() parses to find a qdisc given its handle. Fix first problem adding a TCQ_F_NOPARENT qdisc flag that qdisc_tree_decrease_qlen() can use to abort its tree traversal, as soon as it meets a mq/mqprio qdisc children. Second problem can be fixed by RCU protection. Qdisc are already freed after RCU grace period, so qdisc_list_add() and qdisc_list_del() simply have to use appropriate rcu list variants. A future patch will add a per struct netdev_queue list anchor, so that qdisc_tree_decrease_qlen() can have more efficient lookups. Reported-by:
Daniele Fucini <dfucini@gmail.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Cong Wang <cwang@twopensource.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Each openvswitch tunnel vport (vxlan,gre,geneve) holds a reference to the underlying tunnel device, but never released it when such device is deleted. Deleting the underlying device via the ip tool cause the kernel to hangup in the netdev_wait_allrefs() loop. This commit ensure that on device unregistration dp_detach_port_notify() is called for all vports that hold the device reference, properly releasing it. Fixes: 614732ea ("openvswitch: Use regular VXLAN net_device device") Fixes: b2acd1dc ("openvswitch: Use regular GRE net_device instead of vport") Fixes: 6b001e68 ("openvswitch: Use Geneve device.") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Flavio Leitner <fbl@sysclose.org> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
When a multicast group is joined on a socket, a struct ip_mc_socklist is appended to the sockets mc_list containing information about the joined group. If the interface is hot unplugged, this entry becomes stale. Prior to commit 52ad353a ("igmp: fix the problem when mc leave group") it was possible to remove the stale entry by performing a IP_DROP_MEMBERSHIP, passing either the old ifindex or ip address on the interface. However, this fix enforces that the interface must still exist. Thus with time, the number of stale entries grows, until sysctl_igmp_max_memberships is reached and then it is not possible to join and more groups. The previous patch fixes an issue where a IP_DROP_MEMBERSHIP is performed without specifying the interface, either by ifindex or ip address. However here we do supply one of these. So loosen the restriction on device existence to only apply when the interface has not been specified. This then restores the ability to clean up the stale entries. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Fixes: 52ad353a "(igmp: fix the problem when mc leave group") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Dmitry Vyukov reported a memory leak using IPV6 SCTP sockets. We need to call inet6_destroy_sock() to properly release inet6 specific fields. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2015-12-01 Here's a Bluetooth fix for the 4.4-rc series that fixes a memory leak of the Security Manager L2CAP channel that'll happen for every LE connection. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yang Shi authored
aarch64 doesn't have native store immediate instruction, such operation has to be implemented by the below instruction sequence: Load immediate to register Store register Signed-off-by:
Yang Shi <yang.shi@linaro.org> CC: Zi Shen Lim <zlim.lnx@gmail.com> CC: Xi Wang <xi.wang@gmail.com> Reviewed-by:
Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
While testing the np->opt RCU conversion, I found that UDP/IPv6 was using a mixture of xchg() and sk_dst_lock to protect concurrent changes to sk->sk_dst_cache, leading to possible corruptions and crashes. ip6_sk_dst_lookup_flow() uses sk_dst_check() anyway, so the simplest way to fix the mess is to remove sk_dst_lock completely, as we did for IPv4. __ip6_dst_store() and ip6_dst_store() share same implementation. sk_setup_caps() being called with socket lock being held or not, we have to use sk_dst_set() instead of __sk_dst_set() Note that I had to move the "np->dst_cookie = rt6_get_cookie(rt);" in ip6_dst_store() before the sk_setup_caps(sk, dst) call. This is because ip6_dst_store() can be called from process context, without any lock held. As soon as the dst is installed in sk->sk_dst_cache, dst can be freed from another cpu doing a concurrent ip6_dst_store() Doing the dst dereference before doing the install is needed to make sure no use after free would trigger. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
This patch completes the work I did in commit 45f6fad8 ("ipv6: add complete rcu protection around np->opt"), as I missed sctp part. This simply makes sure np->opt is used with proper RCU locking and accessors. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Konstantin Khlebnikov authored
Proxy entries could have null pointer to net-device. Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Fixes: 84920c14 ("net: Allow ipv6 proxies and arp proxies be shown with iproute2") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Dmitry Vyukov reported that the user could trigger a kernel warning by using a large len value for getsockopt SCTP_GET_LOCAL_ADDRS, as that value directly affects the value used as a kmalloc() parameter. This patch thus switches the allocation flags from all user-controllable kmalloc size to GFP_USER to put some more restrictions on it and also disables the warn, as they are not necessary. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
They don't need to be any bigger than that and with this we start a new bitfield for tracking association runtime stuff, like zero window situation. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
This patch addresses multiple problems : UDP/RAW sendmsg() need to get a stable struct ipv6_txoptions while socket is not locked : Other threads can change np->opt concurrently. Dmitry posted a syzkaller (http://github.com/google/syzkaller) program desmonstrating use-after-free. Starting with TCP/DCCP lockless listeners, tcp_v6_syn_recv_sock() and dccp_v6_request_recv_sock() also need to use RCU protection to dereference np->opt once (before calling ipv6_dup_options()) This patch adds full RCU protection to np->opt Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
For large map->value_size the user space can trigger memory allocation warnings like: WARNING: CPU: 2 PID: 11122 at mm/page_alloc.c:2989 __alloc_pages_nodemask+0x695/0x14e0() Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff82743b56>] dump_stack+0x68/0x92 lib/dump_stack.c:50 [<ffffffff81244ec9>] warn_slowpath_common+0xd9/0x140 kernel/panic.c:460 [<ffffffff812450f9>] warn_slowpath_null+0x29/0x30 kernel/panic.c:493 [< inline >] __alloc_pages_slowpath mm/page_alloc.c:2989 [<ffffffff81554e95>] __alloc_pages_nodemask+0x695/0x14e0 mm/page_alloc.c:3235 [<ffffffff816188fe>] alloc_pages_current+0xee/0x340 mm/mempolicy.c:2055 [< inline >] alloc_pages include/linux/gfp.h:451 [<ffffffff81550706>] alloc_kmem_pages+0x16/0xf0 mm/page_alloc.c:3414 [<ffffffff815a1c89>] kmalloc_order+0x19/0x60 mm/slab_common.c:1007 [<ffffffff815a1cef>] kmalloc_order_trace+0x1f/0xa0 mm/slab_common.c:1018 [< inline >] kmalloc_large include/linux/slab.h:390 [<ffffffff81627784>] __kmalloc+0x234/0x250 mm/slub.c:3525 [< inline >] kmalloc include/linux/slab.h:463 [< inline >] map_update_elem kernel/bpf/syscall.c:288 [< inline >] SYSC_bpf kernel/bpf/syscall.c:744 To avoid never succeeding kmalloc with order >= MAX_ORDER check that elem->value_size and computed elem_size are within limits for both hash and array type maps. Also add __GFP_NOWARN to kmalloc(value_size | elem_size) to avoid OOM warnings. Note kmalloc(key_size) is highly unlikely to trigger OOM, since key_size <= 512, so keep those kmalloc-s as-is. Large value_size can cause integer overflows in elem_size and map.pages formulas, so check for that as well. Fixes: aaac3ba9 ("bpf: charge user for creation of BPF maps and programs") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Marcin Wojtas says: ==================== Marvell Armada XP/370/38X Neta fixes I'm sending v4 with corrected commit log of the last patch, in order to avoid possible conflicts between the branches as suggested by Gregory Clement. Best regards, Marcin Wojtas Changes from v4: * Correct commit log of patch 6/6 Changes from v2: * Style fixes in patch updating mbus protection * Remove redundant stable notifications except for patch 4/6 Changes from v1: * update MBUS windows access protection register once, after whole loop * add fixing value of MVNETA_RXQ_INTR_ENABLE_ALL_MASK * add fixing error path for skb_build() * add possibility of setting custom TX IP checksum limit in DT property ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcin Wojtas authored
The Ethernet controller found in the Armada 38x SoC's family support TCP/IP checksumming with frame sizes larger than 1600 bytes, however only on port 0. This commit enables it by setting 'tx-csum-limit' to 9800B in 'ethernet@70000' node. Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcin Wojtas authored
Since Armada 38x SoC can support IP checksum for jumbo frames only on a single port, it means that this feature should be enabled per-port, rather than for the whole SoC. This patch enables setting custom TX IP checksum limit by adding new optional property to the mvneta device tree node. If not used, by default 1600B is set for "marvell,armada-370-neta" and 9800B for other strings, which ensures backward compatibility. Binding documentation is updated accordingly. Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcin Wojtas authored
In the actual RX processing, there is same error path for both descriptor ring refilling and building skb fails. This is not correct, because after successful refill, the ring is already updated with newly allocated buffer. Then, in case of build_skb() fail, hitherto code left the original buffer unmapped. This patch fixes above situation by swapping error check of skb build with DMA-unmap of original buffer. Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Acked-by:
Simon Guinot <simon.guinot@sequanux.org> Cc: <stable@vger.kernel.org> # v4.2+ Fixes a84e3289 ("net: mvneta: fix refilling for Rx DMA buffers") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcin Wojtas authored
A value originally defined in the driver was inappropriate. Even though the ingress was somehow working, writing MVNETA_RXQ_INTR_ENABLE_ALL_MASK to MVNETA_INTR_ENABLE didn't make any effect, because the bits [31:16] are reserved and read-only. This commit updates MVNETA_RXQ_INTR_ENABLE_ALL_MASK to be compliant with the controller's documentation. Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcin Wojtas authored
MVNETA_RXQ_HW_BUF_ALLOC bit which controls enabling hardware buffer allocation was mistakenly set as BIT(1). This commit fixes the assignment. Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Reviewed-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcin Wojtas authored
This commit adds missing configuration of MBUS windows access protection in mvneta_conf_mbus_windows function - a dedicated variable for that purpose remained there unused since v3.8 initial mvneta support. Because of that the register contents were inherited from the bootloader. Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Reviewed-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 02 Dec, 2015 11 commits
-
-
Johannes Berg authored
In the last change here, I neglected to update the cookie in one code path: when a mgmt-tx has no real cookie sent to userspace as it doesn't wait for a response, but is off-channel. The original code used the SKB pointer as the cookie and always assigned the cookie to the TX SKB in ieee80211_start_roc_work(), but my change turned this around and made the code rely on a valid cookie being passed in. Unfortunately, the off-channel no-wait TX path wasn't assigning one at all, resulting in an uninitialized stack value being used. This wasn't handed back to userspace as a cookie (since in the no-wait case there isn't a cookie), but it was tested for non-zero to distinguish between mgmt-tx and off-channel. Fix this by assigning a dummy non-zero cookie unconditionally, and get rid of a misleading comment and some dead code while at it. I'll clean up the ACK SKB handling separately later. Fixes: 3b79af97 ("mac80211: stop using pointers as userspace cookies") Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Antonio Quartulli authored
DFS channels should not be actively scanned as we can't be sure if we are allowed or not. If the current channel is in the DFS band, active scan might be performed after CSA, but we have no guarantee about other channels, therefore it is safer to prevent active scanning at all. Cc: stable@vger.kernel.org Signed-off-by:
Antonio Quartulli <antonio@open-mesh.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Eliad Peller authored
Interfaces are being initialized (setup) on addition, and torn down on removal. However, p2p device is being torn down when stopped, resulting in the next p2p start operation being done on uninitialized interface. Solve it by calling ieee80211_teardown_sdata() only on interface removal (for the non-netdev case). Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> [squashed in fix to call teardown after unregister] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
David S. Miller authored
Sunil Goutham says: ==================== thunderx: miscellaneous fixes This patch series contains fixes for various issues observed with BGX and NIC drivers. Changes from v1: - Fixed comment syle in the first patch of the series - Removed 'Increase transmit queue length' patch from the series, will recheck if it's a driver or system issue and resubmit. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
Enable or disable BGX LMAC's RX/TX based on corresponding VF's status. If otherwise, when multiple LMAC's physical link is up then packets from all LMAC's whose corresponding VF is not yet initialized will get forwarded to VF0. This is due to VNIC's default configuration where CPI, RSSI e.t.c point to VF0/QSET0/RQ0. This patch will prevent multiple copies of packets on VF0. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
Call netif_carrier_on() only if interface's link is up. Switching this on upon IFF_UP by default, is causing issues with ethernet channel bonding in LACP mode. Initial NETDEV_CHANGE notification was being skipped. Also fixed some issues with link/speed/duplex reporting via ethtool. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
Properly set CQ timer threshold and also set it to 2us. With previous incorrect settings it was set to 0.5us which is too less. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thanneeru Srinivasulu authored
While VNIC or BGX driver teardown, wait for already scheduled delayed work to finish before destroying it. Signed-off-by:
Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thanneeru Srinivasulu authored
Signed-off-by:
Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
After 614732ea, no refcount is maintained for the vport-vxlan module. This allows the userspace to remove such module while vport-vxlan devices still exist, which leads to later oops. v1 -> v2: - move vport 'owner' initialization in ovs_vport_ops_register() and make such function a macro Fixes: 614732ea ("openvswitch: Use regular VXLAN net_device device") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
During own review but also reported by Dmitry's syzkaller [1] it has been noticed that we trigger a heap out-of-bounds access on eBPF array maps when updating elements. This happens with each map whose map->value_size (specified during map creation time) is not multiple of 8 bytes. In array_map_alloc(), elem_size is round_up(attr->value_size, 8) and used to align array map slots for faster access. However, in function array_map_update_elem(), we update the element as ... memcpy(array->value + array->elem_size * index, value, array->elem_size); ... where we access 'value' out-of-bounds, since it was allocated from map_update_elem() from syscall side as kmalloc(map->value_size, GFP_USER) and later on copied through copy_from_user(value, uvalue, map->value_size). Thus, up to 7 bytes, we can access out-of-bounds. Same could happen from within an eBPF program, where in worst case we access beyond an eBPF program's designated stack. Since 1be7f75d ("bpf: enable non-root eBPF programs") didn't hit an official release yet, it only affects priviledged users. In case of array_map_lookup_elem(), the verifier prevents eBPF programs from accessing beyond map->value_size through check_map_access(). Also from syscall side map_lookup_elem() only copies map->value_size back to user, so nothing could leak. [1] http://github.com/google/syzkaller Fixes: 28fbcfa0 ("bpf: add array type of eBPF maps") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 01 Dec, 2015 2 commits
-
-
Eric Dumazet authored
Dmitry provided a syzkaller (http://github.com/google/syzkaller) triggering a fault in sock_wake_async() when async IO is requested. Said program stressed af_unix sockets, but the issue is generic and should be addressed in core networking stack. The problem is that by the time sock_wake_async() is called, we should not access the @flags field of 'struct socket', as the inode containing this socket might be freed without further notice, and without RCU grace period. We already maintain an RCU protected structure, "struct socket_wq" so moving SOCKWQ_ASYNC_NOSPACE & SOCKWQ_ASYNC_WAITDATA into it is the safe route. It also reduces number of cache lines needing dirtying, so might provide a performance improvement anyway. In followup patches, we might move remaining flags (SOCK_NOSPACE, SOCK_PASSCRED, SOCK_PASSSEC) to save 8 bytes and let 'struct socket' being mostly read and let it being shared between cpus. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
This patch is a cleanup to make following patch easier to review. Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA from (struct socket)->flags to a (struct socket_wq)->flags to benefit from RCU protection in sock_wake_async() To ease backports, we rename both constants. Two new helpers, sk_set_bit(int nr, struct sock *sk) and sk_clear_bit(int net, struct sock *sk) are added so that following patch can change their implementation. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-