- 16 Jul, 2015 27 commits
-
-
Krzysztof Kozlowski authored
platform_driver does not need to set an owner because platform_driver_register() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Grygorii Strashko authored
On DRA7 there is one pinctrl domain (dra7_pmx_core) and PRCM wake-up IRQ is not shared, so remove quirk. Cc: Nishanth Menon <nm@ti.com> Fixes: 31320bea ('pinctrl: single: Add DRA7 pinctrl compatibility') Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Geert Uytterhoeven authored
Since the removal of the r8a7740 legacy SoC code in commit 44d88c75 ("ARM: shmobile: Remove legacy SoC code for R-Mobile A1"), r8a7740 is only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Geert Uytterhoeven authored
Since the removal of the r8a7740 legacy SoC code in commit 44d88c75 ("ARM: shmobile: Remove legacy SoC code for R-Mobile A1"), r8a7740 is only supported in generic ARM multi-platform builds. Hence CONFIG_ARCH_MULTIPLATFORM is always set, and the check can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Geert Uytterhoeven authored
Since the removal of the sh73a0 legacy SoC code in commit 9a986398 ("ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5"), sh73a0 is only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Geert Uytterhoeven authored
Since the removal of the sh73a0 legacy SoC code in commit 9a986398 ("ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5"), sh73a0 is only supported in generic ARM multi-platform builds. Hence CONFIG_ARCH_MULTIPLATFORM is always set, and the check can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Geert Uytterhoeven authored
If the pin function controller (which can be a GPIO controller) is instantiated before the interrupt controllers, due to the ordering in the DTS, the irq domains for the interrupt controllers referenced by its "interrupts-extended" property cannot be found yet: irq: no irq domain found for /interrupt-controller@e61c0000 ! As the sh-pfc driver accesses the platform device's resources directly, it cannot find the (optional) IRQ resources, and thinks no interrupts are available. This may lead to failures later, when GPIOs are used as interupts: gpio-keys keyboard: Unable to claim irq 0; error -22 gpio-keys: probe of keyboard failed with error -22 To fix this, add support for deferred probing to sh-pfc, by converting the driver from direct platform device resource access to using the platform_get_resource() and platform_get_irq() helpers. Note that while this fixes the root cause worked around by commit e4ba0a9b ("ARM: shmobile: r8a73a4: Move pfc node to work around probe ordering bug"), I strongly recommend against reverting the workaround now, as this would lead to lots of probe deferrals in drivers relying on pinctrl. This may be reconsidered once the DT code starts taking into account phandle dependencies during device instantation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Laurent Pinchart authored
The "function", "pins" and "groups" pinmux and pinctrl properties have been standardized. Support them in addition to the custom "renesas,*" properties. New-style and old-style properties can't be mixed in DT. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Dan Carpenter authored
Checkpatch.pl complains about these: WARNING: Possible unnecessary 'out of memory' message The messages use a little extra RAM and they add a few extra lines of code. We're probably never going to hit these out of memory situations but if we did then kmalloc() has pretty good error messages built-in. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Dan Carpenter authored
We were allocating enough space because sizeof("-grp") and sizeof("-mux") are both equal to 5 but in the snprintf() we only allowed for 4 characters so the last 'p' and 'x' characters were truncated. The allocate and sprintf can be done in one step with the kasprintf(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Masahiro Yamada authored
Kbuild should descend into drivers/pinctrl/ only when CONFIG_PINCTRL is enabled because everything under that directory depends on CONFIG_PINCTRL. We can avoid the conditional, ifeq ($(CONFIG_OF),y) ... endif. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Masahiro Yamada authored
Add pin configuration and pinmux support for UniPhier PH1-LD6b SoC. Changes in v2: - sort groups and funcs alphabetically - add i2c pin-mux settings - sort members of platform_driver - change to tristate - add THIS_MODULE to pinctrl_desc - use module_platform_driver Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Masahiro Yamada authored
Add pin configuration and pinmux support for UniPhier ProXstream2 SoC. Changes in v2: - sort groups and funcs alphabetically - add i2c pin-mux settings - sort members of platform_driver - change to tristate - add THIS_MODULE to pinctrl_desc - use module_platform_driver Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Masahiro Yamada authored
Add pin configuration and pinmux support for UniPhier PH1-Pro5 SoC. Changes in v2: - sort groups and funcs alphabetically - add i2c pin-mux settings - sort members of platform_driver - change to tristate - add THIS_MODULE to pinctrl_desc - use module_platform_driver Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Masahiro Yamada authored
Add pin configuration and pinmux support for UniPhier PH1-sLD8 SoC. Changes in v2: - sort groups and funcs alphabetically - add i2c pin-mux settings - sort members of platform_driver - change to tristate - add THIS_MODULE to pinctrl_desc - use module_platform_driver Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Masahiro Yamada authored
Add pin configuration and pinmux support for UniPhier PH1-Pro4 SoC. Changes in v2: - sort groups and funcs alphabetically - add i2c pin-mux settings - sort members of platform_driver - change to tristate - add THIS_MODULE to pinctrl_desc - use module_platform_driver Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Masahiro Yamada authored
Add pin configuration and pinmux support for UniPhier PH1-LD4 SoC. Changes in v2: - sort groups and funcs alphabetically - add missing "emmc_dat8" group - add i2c pin-mux settings - sort members of platform_driver - change to tristate - add THIS_MODULE to pinctrl_desc - use module_platform_driver Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Masahiro Yamada authored
The core support for the pinctrl drivers for all the UniPhier SoCs. Changes in v2: - drop vogus THIS_MODULE because this file is always built-in - drop vogus "include <linux/module.h> because this file is always built-in Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Bjorn Andersson authored
The MPP supports three modes; digital, analog and sink mode. This patch implements support for the latter. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Bjorn Andersson authored
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Bjorn Andersson authored
There's currently no way to re-enable a mpp block once you've entered a state that disables the state, this patch makes it possible to leave the bias-high-impedance state. Also read the enable state from the hardware on probe. With this in place the is_enabled variable is accurately tracking the state of the hardware and we can use that for the debug output as well. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Bjorn Andersson authored
Use the newly introduced extensible generic dt parser instead of rolling our own dt parsing functions. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Masahiro Yamada authored
This commit does not change the logic at all. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Frank Li authored
Add i.MX6UL pinctrl driver support. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Laurent Pinchart authored
GPIO banks 1 and 7 are missing pins 26 to 31. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Laurent Pinchart authored
GPIO banks 1 and 2 are missing pins 30 and 31. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Mario Bambagini authored
Tabs have been inserted instead of spaces to indent the code correctly. Same error fixed four times. Signed-off-by: Mario Bambagini <mario.bambagini@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 12 Jul, 2015 11 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This reverts commit dec4f799. Jörg Otte reports a NULL pointder dereference due to this commit, as 'crtc_state' very much can be NULL: crtc_state = state->base.state ? intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL; So the change to test 'crtc_state->base.active' cannot possibly be correct as-is. There may be some other minimal fix (like just checking crtc_state for NULL), but I'm just reverting it now for the rc2 release, and people like Daniel Vetter who actually know this code will figure out what the right solution is in the longer term. Reported-and-bisected-by: Jörg Otte <jrg.otte@gmail.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull VFS fixes from Al Viro: "Fixes for this cycle regression in overlayfs and a couple of long-standing (== all the way back to 2.6.12, at least) bugs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: freeing unlinked file indefinitely delayed fix a braino in ovl_d_select_inode() 9p: don't leave a half-initialized inode sitting around
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "A fair number of 4.2 fixes also because Markos opened the flood gates. - Patch up the math used calculate the location for the page bitmap. - The FDC (Not what you think, FDC stands for Fast Debug Channel) IRQ around was causing issues on non-Malta platforms, so move the code to a Malta specific location. - A spelling fix replicated through several files. - Fix to the emulation of an R2 instruction for R6 cores. - Fix the JR emulation for R6. - Further patching of mindless 64 bit issues. - Ensure the kernel won't crash on CPUs with L2 caches with >= 8 ways. - Use compat_sys_getsockopt for O32 ABI on 64 bit kernels. - Fix cache flushing for multithreaded cores. - A build fix" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: O32: Use compat_sys_getsockopt. MIPS: c-r4k: Extend way_string array MIPS: Pistachio: Support CDMM & Fast Debug Channel MIPS: Malta: Make GIC FDC IRQ workaround Malta specific MIPS: c-r4k: Fix cache flushing for MT cores Revert "MIPS: Kconfig: Disable SMP/CPS for 64-bit" MIPS: cps-vec: Use macros for various arithmetics and memory operations MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0 MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2 MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA MIPS: kernel: smp-cps: Fix 64-bit compatibility errors due to pointer casting MIPS: Fix erroneous JR emulation for MIPS R6 MIPS: Fix branch emulation for BLTC and BGEC instructions MIPS: kernel: traps: Fix broken indentation MIPS: bootmem: Don't use memory holes for page bitmap MIPS: O32: Do not handle require 32 bytes from the stack to be readable. MIPS, CPUFREQ: Fix spelling of Institute. MIPS: Lemote 2F: Fix build caused by recent mass rename.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: - the high latency PIT detection fix, which slipped through the cracks for rc1 - a regression fix for the early printk mechanism - the x86 part to plug irq/vector related hotplug races - move the allocation of the espfix pages on cpu hotplug to non atomic context. The current code triggers a might_sleep() warning. - a series of KASAN fixes addressing boot crashes and usability - a trivial typo fix for Kconfig help text * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help text x86/irq: Retrieve irq data after locking irq_desc x86/irq: Use proper locking in check_irq_vectors_for_cpu_disable() x86/irq: Plug irq vector hotplug race x86/earlyprintk: Allow early_printk() to use console style parameters like '115200n8' x86/espfix: Init espfix on the boot CPU side x86/espfix: Add 'cpu' parameter to init_espfix_ap() x86/kasan: Move KASAN_SHADOW_OFFSET to the arch Kconfig x86/kasan: Add message about KASAN being initialized x86/kasan: Fix boot crash on AMD processors x86/kasan: Flush TLBs after switching CR3 x86/kasan: Fix KASAN shadow region page tables x86/init: Clear 'init_level4_pgt' earlier x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "This update from the timer departement contains: - A series of patches which address a shortcoming in the tick broadcast code. If the broadcast device is not available or an hrtimer emulated broadcast device, some of the original assumptions lead to boot failures. I rather plugged all of the corner cases instead of only addressing the issue reported, so the change got a little larger. Has been extensivly tested on x86 and arm. - Get rid of the last holdouts using do_posix_clock_monotonic_gettime() - A regression fix for the imx clocksource driver - An update to the new state callbacks mechanism for clockevents. This is required to simplify the conversion, which will take place in 4.3" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/broadcast: Prevent NULL pointer dereference time: Get rid of do_posix_clock_monotonic_gettime cris: Replace do_posix_clock_monotonic_gettime() tick/broadcast: Unbreak CONFIG_GENERIC_CLOCKEVENTS=n build tick/broadcast: Handle spurious interrupts gracefully tick/broadcast: Check for hrtimer broadcast active early tick/broadcast: Return busy when IPI is pending tick/broadcast: Return busy if periodic mode and hrtimer broadcast tick/broadcast: Move the check for periodic mode inside state handling tick/broadcast: Prevent deep idle if no broadcast device available tick/broadcast: Make idle check independent from mode and config tick/broadcast: Sanity check the shutdown of the local clock_event tick/broadcast: Prevent hrtimer recursion clockevents: Allow set-state callbacks to be optional clocksource/imx: Define clocksource for mx27
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single fix for a cpu hotplug race vs. interrupt descriptors: Prevent irq setup/teardown across the cpu starting/dying parts of cpu hotplug so that the starting/dying cpu has a stable view of the descriptor space. This has been an issue for all architectures in the cpu dying phase, where interrupts are migrated away from the dying cpu. In the starting phase its mostly a x86 issue vs the vector space update" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hotplug: Prevent alloc/free of irq descriptors during cpu up/down
-
Al Viro authored
Normally opening a file, unlinking it and then closing will have the inode freed upon close() (provided that it's not otherwise busy and has no remaining links, of course). However, there's one case where that does *not* happen. Namely, if you open it by fhandle with cold dcache, then unlink() and close(). In normal case you get d_delete() in unlink(2) notice that dentry is busy and unhash it; on the final dput() it will be forcibly evicted from dcache, triggering iput() and inode removal. In this case, though, we end up with *two* dentries - disconnected (created by open-by-fhandle) and regular one (used by unlink()). The latter will have its reference to inode dropped just fine, but the former will not - it's considered hashed (it is on the ->s_anon list), so it will stay around until the memory pressure will finally do it in. As the result, we have the final iput() delayed indefinitely. It's trivial to reproduce - void flush_dcache(void) { system("mount -o remount,rw /"); } static char buf[20 * 1024 * 1024]; main() { int fd; union { struct file_handle f; char buf[MAX_HANDLE_SZ]; } x; int m; x.f.handle_bytes = sizeof(x); chdir("/root"); mkdir("foo", 0700); fd = open("foo/bar", O_CREAT | O_RDWR, 0600); close(fd); name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0); flush_dcache(); fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR); unlink("foo/bar"); write(fd, buf, sizeof(buf)); system("df ."); /* 20Mb eaten */ close(fd); system("df ."); /* should've freed those 20Mb */ flush_dcache(); system("df ."); /* should be the same as #2 */ } will spit out something like Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 283282 21692 93% / - inode gets freed only when dentry is finally evicted (here we trigger than by remount; normally it would've happened in response to memory pressure hell knows when). Cc: stable@vger.kernel.org # v2.6.38+; earlier ones need s/kill_it/unhash_it/ Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
when opening a directory we want the overlayfs inode, not one from the topmost layer. Reported-By: Andrey Jr. Melnikov <temnota.am@gmail.com> Tested-By: Andrey Jr. Melnikov <temnota.am@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Cc: stable@vger.kernel.org # all branches Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "1) Fixes for a handful of smatch reports (Thanks Dan C.!) and minor bug fixes (patches 1-6) 2) Correctness fixes to the BLK-mode nvdimm driver (patches 7-10). Granted these are slightly large for a -rc update. They have been out for review in one form or another since the end of May and were deferred from the merge window while we settled on the "PMEM API" for the PMEM-mode nvdimm driver (ie memremap_pmem, memcpy_to_pmem, and wmb_pmem). Now that those apis are merged we implement them in the BLK driver to guarantee that mmio aperture moves stay ordered with respect to incoming read/write requests, and that writes are flushed through those mmio-windows and platform-buffers to be persistent on media. These pass the sub-system unit tests with the updates to tools/testing/nvdimm, and have received a successful build-report from the kbuild robot (468 configs). With acks from Rafael for the touches to drivers/acpi/" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: nfit: add support for NVDIMM "latch" flag nfit: update block I/O path to use PMEM API tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test tools/testing/nvdimm: fix return code for unimplemented commands tools/testing/nvdimm: mock ioremap_wt pmem: add maintainer for include/linux/pmem.h nfit: fix smatch "use after null check" report nvdimm: Fix return value of nvdimm_bus_init() if class_create() fails libnvdimm: smatch cleanups in __nd_ioctl sparse: fix misplaced __pmem definition
-
- 11 Jul, 2015 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Mostly slight adjusments for new drivers, but also one core fix for which finally the dependencies are now available as well" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Mark instantiated device nodes with OF_POPULATE i2c: jz4780: Fix return value if probe fails i2c: xgene-slimpro: Fix missing mbox_free_channel call in probe error path i2c: I2C_MT65XX should depend on HAS_DMA
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "A fix (revert) for a recent regression in Synaptics driver and a fix for Elan i2c touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors" Input: elan_i2c - change the hover event from MT to ST
-