Add gfp mask argument to gb_operation_create to allow operations to be
allocated in atomic context.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The current host-controller message-cancellation implementation suffer
from a lifetime bug as dynamically allocated URBs would complete and be
deallocated while being unlinked as part of cancellation.

The current locking is also insufficient to prevent the related race
where the URB is deallocated before being unlinked.

Fix this by pushing the cancellation implementation from greybus core
down to the host-controller drivers, and replace the "cookie" pointer
with a hcpriv field that those drivers can use to maintain their state
with the required locking and reference counting in place.

Specifically the drivers need to acquire a reference to the URB under a
lock before calling usb_kill_urb as part of cancellation.

Note that this also removes the insufficient gb_message_mutex, which
also effectively prevented us from implementing support for submissions
from atomic context.

Instead the host-controller drivers must now explicitly make sure that
the pre-allocated URBs are not reused while cancellation is in progress.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

They aren't used anymore, remove them. This also gets rid of
gb_bundle_connections_init().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

While introducing bundles, the device_id also got moved to the bundle,
whereas it identifies an interface block to the AP.

Move it back to interface instead of bundle.

Calls to gb_bundle(s)_init() are dropped as connections will be
initialized while they are created now, as device_id will be valid.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The responsibility of this routine is to configure ARA switch to
establish a connection between a cport on the AP and a cport on an
interface.

The SVC protocol is responsible for such requests and we already have
connection_{create|destroy}_operation() to take care of this.

Moreover, this request is not served by the firmware or gbsim today and
they just print a debug message on this request. And so it is safe to
drop svc_set_route_send() function and fix the required functionality of
configuring the switch in svc protocol driver later.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

intf_cport_id is local to an interface and same intf_cport_id can be
used for two separate interface blocks. For finding a connection for an
interface, we are matching intf_cport_id of the connection with
cport_id, passed as argument. This is wrong, as it can match for a
connection on a different interface block.

Fix it by also comparing interface block for which connection is
requested.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We may bind protocol with a connection from gb_connection_create(), if
bundle's device_id is already set. That's not the case until now.

But if the protocol is initialized with a call to
protocol->connection_init() from this place, kernel will crash.

This will happen because the connection isn't fully initialized yet, for
example its operation list isn't initialized yet. And as soon as the
protocol driver tries to send a request to the module from its
connection_init() callback, we will add an operation to this
uninitialized list. And it will crash while doing:

        prev->next = new;

Try to bind the connection with a protocol only after the connection is
ready for operations.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

No need to write simple init/exit routines, use
gb_builtin_protocol_driver().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This macro is also required by core protocols like control and svc, and
hence the 'gpbridge' name doesn't fit anymore.

Lets call this macro gb_builtin_protocol_driver().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We have already defined macro's for SVC's major/minor numbers, lets use
them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The greybus UART protocol specification was updated to reduce the size of
the control field in serial-state-request and line-state-request. This
patch updates the kernel protocol driver to reflect the specification
changes. Once applied gbsim changes will be also be updated automatically
since gbsim depends on the header being modified directly.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

After reviewing the UART specification for greybus break, parity, framing
and over-run errors were moved to the receive-data message. This patch
implements that specification change in the UART protocol driver. Matching
code in gbsim has been tested with this change.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Parity/overrun/framing and break signals have been moved to the
receive-data message to more easily associate the signals with the TTY API.
Update the definitions in the protocol header and add a flags field to the
receive-data structure to facilitate transmission of those signal with the
receive-data message.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

There are new protocols defined which don't belong to any existing
class, add more classes to support them.
Reported-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The mmc request should assigned before use. Then
It should avoid freeing before using in mmc_request_done().
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The mmc host should be removed frist. Then it
will be freed.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The macro of sdio version major and minor is defined twice.
This patch remove the redundant one.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The current audio code uses i2c_get_adapter() without checking
that a non-NULL pointer is returned (i.e., that the i2c device
actually exists).  When that happens, the system panics.
Fix the potential panic by erroring out with -ENODEV when
i2c_get_adapter() returns NULL.

CC: John Stultz <john.stultz@linaro.com>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We must be prepared to receive hotplug events as soon as we submit the
SVC URB. Since commit 2eb8a6a947d7 ("core: don't set up endo until host
device is initialized") this is no longer the case as the endo would not
have been setup, something which may lead to a null-pointer dereference
in endo_get_module_id() when the interface is created (see oops below
with an added dev_dbg for hd->endo).

Fix this by setting up the endo before submitting the SVC URB.

[   28.810610] gb_interface_create - hd->endo =   (null)
[   28.816020] Unable to handle kernel NULL pointer dereference at virtual address 0000022b
[   28.824952] pgd = c0004000
[   28.827880] [0000022b] *pgd=00000000
[   28.831913] Internal error: Oops: 17 [#1] PREEMPT ARM
[   28.837183] Modules linked in: gb_es1(O+) greybus(O) netconsole
[   28.843419] CPU: 0 PID: 21 Comm: kworker/u2:1 Tainted: G           O    4.1.0-rc7 #12
[   28.851576] Hardware name: Generic AM33XX (Flattened Device Tree)
[   28.857978] Workqueue: greybus_ap ap_process_event [greybus]
[   28.863890] task: cf2961c0 ti: cf29c000 task.ti: cf29c000
[   28.869529] PC is at endo_get_module_id+0x18/0x88 [greybus]
[   28.875355] LR is at gb_interface_add+0x88/0x204 [greybus]
[   28.881070] pc : [<bf0052d4>]    lr : [<bf005dac>]    psr: 20070013
[   28.881070] sp : cf29de08  ip : cf29de18  fp : cf29de14
[   28.893021] r10: 00000001  r9 : 0000005a  r8 : cd813ec6
[   28.898461] r7 : 00000058  r6 : cf7fa200  r5 : 00000001  r4 : cf7fa20c
[   28.905261] r3 : 00000000  r2 : cf2961c0  r1 : 00000001  r0 : 00000000
[   28.912067] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[   28.919677] Control: 10c5387d  Table: 8f508019  DAC: 00000015
[   28.925663] Process kworker/u2:1 (pid: 21, stack limit = 0xcf29c210)
[   28.932279] Stack: (0xcf29de08 to 0xcf29e000)
[   28.936823] de00:                   cf29de44 cf29de18 bf005dac bf0052c8 00000058 cd813ec0
[   28.945349] de20: cf58b60c bf00afe0 cf7fa200 cf58b600 0000005a 00000001 cf29de84 cf29de48
[   28.953865] de40: bf004844 bf005d30 00000000 cf02d800 cf29de6c cf29de60 c00759a0 cf58b60c
[   28.962389] de60: cf2742c0 cf02d800 cf0c6000 cf29dea8 c07b745c 00000000 cf29dee4 cf29de88
[   28.970908] de80: c005943c bf004560 00000001 00000000 c0059354 cf02d800 c0059c0c 00000001
[   28.979426] dea0: 00000000 00000000 bf00b314 00000000 00000000 bf009144 c04e3710 cf02d800
[   28.987945] dec0: cf2742d8 cf02d830 00000088 c0059bd0 00000000 cf2742c0 cf29df24 cf29dee8
[   28.996464] dee0: c0059b78 c0059248 cf29c000 cf245d40 c0776890 c07b6bf3 00000000 00000000
[   29.004983] df00: cf245d40 cf2742c0 c0059b20 00000000 00000000 00000000 cf29dfac cf29df28
[   29.013502] df20: c005fe90 c0059b2c c07812d0 00000000 cf29df4c cf2742c0 00000000 00000001
[   29.022025] df40: dead4ead ffffffff ffffffff c07c86b0 00000000 00000000 c05fd8e8 cf29df5c
[   29.030542] df60: cf29df5c 00000000 00000001 dead4ead ffffffff ffffffff c07c86b0 00000000
[   29.039062] df80: 00000000 c05fd8e8 cf29df88 cf29df88 cf245d40 c005fd98 00000000 00000000
[   29.047581] dfa0: 00000000 cf29dfb0 c00108f8 c005fda4 00000000 00000000 00000000 00000000
[   29.056105] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   29.064623] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffff0000 ffff0000
[   29.073178] [<bf0052d4>] (endo_get_module_id [greybus]) from [<bf005dac>] (gb_interface_add+0x88/0x204 [greybus])
[   29.083887] [<bf005dac>] (gb_interface_add [greybus]) from [<bf004844>] (ap_process_event+0x2f0/0x4d8 [greybus])
[   29.094527] [<bf004844>] (ap_process_event [greybus]) from [<c005943c>] (process_one_work+0x200/0x8e4)
[   29.104228] [<c005943c>] (process_one_work) from [<c0059b78>] (worker_thread+0x58/0x500)
[   29.112668] [<c0059b78>] (worker_thread) from [<c005fe90>] (kthread+0xf8/0x110)
[   29.120295] [<c005fe90>] (kthread) from [<c00108f8>] (ret_from_fork+0x14/0x3c)
[   29.127825] Code: e24cb004 e52de004 e8bd4000 e3510000 (e5d0c22b)
[   29.137481] ---[ end trace ad95c3c26bdc98ce ]---
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

For older kernel, < 3.11, no copy to/from buffer with skip support was
defined. This could break builds for this versions of kernel.
Add them here.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Tested-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Some of the options for mmc host, are not defined in older kernels.
MMC_CAP2_HS400_1_2V, MMC_CAP2_HS400_1_8V, MMC_TIMING_MMC_DDR52 and
MMC_TIMING_MMC_HS400.

To not use them for older versions.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Tested-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

It is possible that (by mistake) the manifest contains non-control
cports with their protocol set as control-protocol or non-control bundle
with their class set as control-class.

Catch such cases, WARN for them and finally ignore them.

Also WARN if the control cport doesn't have its protocol as
control-protocol and control bundle doesn't have its class as
control-class.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The AP needs to send connected and disconnection events to all
interfaces, before a CPort (other than control CPort) can be used.

For now do it which we initialize the connection, but it should be moved
to operations code later.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Manifest is fetched with control protocol now and so we don't need space
for it in hotplug data.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Control protocol is ready to be used for fetching manifest. Lets do it.

This changes few things:
- Creates/initializes bundle/connection for control protocol initially
  and skips doing the same later.
- Manifest is parsed at link-up now, instead of hotplug which was the
  case earlier. This is because we need device_id (provided during
  link-up) for registering bundle.
- Manifest is fetched using control protocol.

So the sequence of events is:

Event                 Previously       Now
-----                 ----------       ---
Interface Hotplug     create intf      create intf
                      parse mfst

Interface Link Up     init bundles     create control conn
                                       get mfst size
                                       get mfst
                                       parse mfst
                                       init bundles
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add control protocol driver that is responsible for handling operations
on control CPort. The AP also needs to support incoming requests on its
control port. Features not implemented yet are marked as TODO for now.

NOTE: This also fixes cport-bundle-id to 0 and cport-id to 2 for control
protocol.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

A connection and a bundle will be created for interfaces at the very
beginning for control protocol's functioning. And so the list of bundles
and connections for a interface will be non-empty by the time manifest
is parsed.

Currently we are firing a WARN when these lists are found to be
non-empty. Lets fix that to contain single bundle and connection for
control protocol.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Extend sdio implementation, as it for now it was basically stubs.

This implementation is compile tested only since there is no fw or
simulation support yet.
Next step is to add sdio support to gbsim and test it with success
using the mmc_test facility.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add MMC to the list of options that shall be enable.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Greg reported sparse picked up the following warning:
/home/gregkh/ara/greybus/uart.c:105:34: warning: cast to restricted __le16

This is due to the control variable in gb_uart_serial_state_request which
needs to be declared __le16 not __u16.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reported-by: Greg Kroah-Hartman <gregkh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Latch signals coming from UART module for
- GB_UART_CTRL_DCD
- GB_UART_CTRL_DSR
- GB_UART_CTRL_RI
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This reverts commit 698d4bd3e7541a660a3c3665f0af9e787650a239 as Alex
says it is broken.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This resolves a conflict with es2.c that I fixed up.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

ES2 give us more endpoints. Use them to map one cport to two endpoints
(in and out). Because there is more cports than endpoints, we still
need to mux other cports traffic on 2 endpoints.
Firmware currently assumes these endpoints are 2 and 3.

By default, all cports are muxed.
To map one cport to 2 endpoints, use map_cport_to_ep().
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

ES2 support 16 endpoints. Update es2.c to allocate endpoints, urbs
and buffers for these new endpoints.

Currently, they are not yet used and es2.c is working in legacy mode
(only original endpoints are used).
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Instead of keep cport buffers, urbs and endpoints in es1_ap_dev,
move them in two dedicated struct (es1_cport_in and es1_cport_out),
in order to ease the migration to es2 (increase the number of endpoint).
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We now limit the maximum value for both host and module CPort ids,
and we know they can always be represented in a single byte.

Make use of this by using only one of the two pad bytes for encoding
the CPort id in a message header.

(Note that we have never used a CPort higher than 255.  Encoding
such a small CPort id in little endian 2-byte format has the same
result as what is done here.)
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>