- 13 Dec, 2018 30 commits
-
-
Sagi Grimberg authored
Will be used by nvme-rdma for queue map separation support. Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Chaitanya Kulkarni authored
Now that we have error log page implementation update smart log command handler to provide number of error log entries in the lifetime of the controller field. Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
-
Chaitanya Kulkarni authored
Now that we have support for all the major parts of the target we add a NVMe error log page handler so that host can read the log page. Signed-off-by:
-
Chaitanya Kulkarni authored
This patch adds support for the file backend to populate the error log entries. Here we map the errno to the NVMe status codes. Signed-off-by:
-
Chaitanya Kulkarni authored
This patch adds the support for the block device backend to populate the error log entries. Here we map the blk_status_t to the NVMe status. Signed-off-by:
-
Chaitanya Kulkarni authored
This patch adds the support to maintain the error log page for admin commands. Signed-off-by:
-
Chaitanya Kulkarni authored
This patch adds the support to maintain the error log page for rdma transport, we mainly focus here on the NVME_INVALID_FIELD errors. Signed-off-by:
-
Chaitanya Kulkarni authored
This patch adds the support to maintain error log page for the fabrics prop get, prop set, and admin connect commands. Here we also update the discovery.c and add update set/get features and parse functions to support error log page. Signed-off-by:
-
Chaitanya Kulkarni authored
This patch adds the support to maintain error log page for the nvmet-core. Signed-off-by:
-
Chaitanya Kulkarni authored
This patch adds nvmet_req based interface to the nvmet-core so that we can update the error log page. We update error log page in the request completion path when status is not set to NVME_SC_SUCCESS. Signed-off-by:
-
Chaitanya Kulkarni authored
This patch adds necessary fields in the target data structures to support error log page. For a target controller, we add a new error log field to maintain the error log, at any given point we maintain error entries equal to NVMET_ERROR_LOG_SLOTS for each controller. In the following patch, we also update the error log page entry in the I/O completion path so we introduce a spinlock for synchronization of the log. For nvmet_req, we add a new field error_loc to hold the location of the error in the command when the actual error occurs for each request and a starting LBA if applicable. Signed-off-by:
-
Chaitanya Kulkarni authored
This patch adds the NVMe error slot definition from the spec. Signed-off-by:
-
Chaitanya Kulkarni authored
This is a preparation patch which removes the nvme common command cdw10 array and replace with individual fields. This is needed for the nvmet error log page implementation make is error log page entry offset assignment easier. Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Jens Axboe authored
When boxes are run near (or to) OOM, we have a problem with the discard page allocation in nvme. If we fail allocating the special page, we return busy, and it'll get retried. But since ordering is honored for dispatch requests, we can keep retrying this same IO and failing. Behind that IO could be requests that want to free memory, but they never get the chance. Allocate a fixed discard page per controller for a safe fallback, and use that if the initial allocation fails. Signed-off-by:
Jens Axboe <axboe@kernel.dk> Reviewed-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
-
Chengguang Xu authored
Add __exit annotation to cleanup helper which is only called once in the module. Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Reviewed-by:
-
Sagi Grimberg authored
This patch implements the NVMe over TCP host driver. It can be used to connect to remote NVMe over Fabrics subsystems over good old TCP/IP. The driver implements the TP 8000 of how nvme over fabrics capsules and data are encapsulated in nvme-tcp pdus and exchaged on top of a TCP byte stream. nvme-tcp header and data digest are supported as well. To connect to all NVMe over Fabrics controllers reachable on a given taget port over TCP use the following command: nvme connect-all -t tcp -a $IPADDR This requires the latest version of nvme-cli with TCP support. Signed-off-by:
Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by:
Roy Shterman <roys@lightbitslabs.com> Signed-off-by:
Solganik Alexander <sashas@lightbitslabs.com> Signed-off-by:
-
Sagi Grimberg authored
Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
Sagi Grimberg authored
This patch implements the TCP transport driver for the NVMe over Fabrics target stack. This allows exporting NVMe over Fabrics functionality over good old TCP/IP. The driver implements the TP 8000 of how nvme over fabrics capsules and data are encapsulated in nvme-tcp pdus and exchaged on top of a TCP byte stream. nvme-tcp header and data digest are supported as well. Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Data digest is a nvme-tcp specific feature, but nothing prevents other transports reusing the concept so do not associate with tcp transport solely. Signed-off-by:
-
Sagi Grimberg authored
Header digest is a nvme-tcp specific feature, but nothing prevents other transports reusing the concept so do not associate with tcp transport solely. Signed-off-by:
-
Sagi Grimberg authored
nvmet-tcp will implement it to allocate queue commands which are only known at nvmf connect time (sq size). Signed-off-by:
-
Sagi Grimberg authored
Introduce a helper to copy datagram into an iovec iterator but also update a predefined hash. This is useful for consumers of skb_copy_datagram_iter to also support inflight data digest without having to finish to copy and only then traverse the iovec and calculate the digest hash. Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sagi Grimberg authored
Allow consumers that want to use iov iterator helpers and also update a predefined hash calculation online when copying data. This is useful when copying incoming network buffers to a local iterator and calculate a digest on the incoming stream. nvme-tcp host driver that will be introduced in following patches is the first consumer via skb_copy_and_hash_datagram_iter. Acked-by:
-
Sagi Grimberg authored
skb_copy_datagram_iter and skb_copy_and_csum_datagram are essentialy the same but with a couple of differences: The first is the copy operation used which either a simple copy or a csum_and_copy, and the second are the behavior on the "short copy" path where simply copy needs to return the number of bytes successfully copied while csum_and_copy needs to fault immediately as the checksum is partial. Introduce __skb_datagram_iter that additionally accepts: 1. copy operation function pointer 2. private data that goes with the copy operation 3. fault_short flag to indicate the action on short copy Suggested-by:
-
Sagi Grimberg authored
The single caller to csum_and_copy_to_iter is skb_copy_and_csum_datagram and we are trying to unite its logic with skb_copy_datagram_iter by passing a callback to the copy function that we want to apply. Thus, we need to make the checksum pointer private to the function. Acked-by:
-
Sagi Grimberg authored
This will be useful to consolidate skb_copy_and_hash_datagram_iter and skb_copy_and_csum_datagram to a single code path. Acked-by:
-
Sagi Grimberg authored
Prevent a namespace conflict as in following patches as skbuff.h will include the crypto API. Acked-by:
-
Dennis Zhou authored
Between v3 [1] and v4 [2] of the blkg association series, the association point moved from generic_make_request_checks(), which is called after the request enters the queue, to bio_set_dev(), which is when the bio is formed before submit_bio(). When the request_queue goes away, the blkgs supporting the request_queue are destroyed and then the q->root_blkg is set to %NULL. This patch adds a %NULL check to blkg_tryget_closest() to prevent the NPE caused by the above. It also adds a guard to see if the request_queue is dying when creating a blkg to prevent creating a blkg for a dead request_queue. [1] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/ [2] https://lore.kernel.org/lkml/20181126211946.77067-1-dennis@kernel.org/ Fixes: 5cdf2e3f ("blkcg: associate blkg when associating a device") Reported-and-tested-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Dennis Zhou <dennis@kernel.org> Signed-off-by:
-
- 12 Dec, 2018 2 commits
-
-
Ming Lei authored
rwb_enabled() can't be changed when there is any inflight IO. wbt_disable_default() may set rwb->wb_normal as zero, however the blk_stat timer may still be pending, and the timer function will update wrb->wb_normal again. This patch introduces blk_stat_deactivate() and applies it in wbt_disable_default(), then the following IO hang triggered when running parted & switching io scheduler can be fixed: [ 369.937806] INFO: task parted:3645 blocked for more than 120 seconds. [ 369.938941] Not tainted 4.20.0-rc6-00284-g906c801e5248 #498 [ 369.939797] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 369.940768] parted D 0 3645 3239 0x00000000 [ 369.941500] Call Trace: [ 369.941874] ? __schedule+0x6d9/0x74c [ 369.942392] ? wbt_done+0x5e/0x5e [ 369.942864] ? wbt_cleanup_cb+0x16/0x16 [ 369.943404] ? wbt_done+0x5e/0x5e [ 369.943874] schedule+0x67/0x78 [ 369.944298] io_schedule+0x12/0x33 [ 369.944771] rq_qos_wait+0xb5/0x119 [ 369.945193] ? karma_partition+0x1c2/0x1c2 [ 369.945691] ? wbt_cleanup_cb+0x16/0x16 [ 369.946151] wbt_wait+0x85/0xb6 [ 369.946540] __rq_qos_throttle+0x23/0x2f [ 369.947014] blk_mq_make_request+0xe6/0x40a [ 369.947518] generic_make_request+0x192/0x2fe [ 369.948042] ? submit_bio+0x103/0x11f [ 369.948486] ? __radix_tree_lookup+0x35/0xb5 [ 369.949011] submit_bio+0x103/0x11f [ 369.949436] ? blkg_lookup_slowpath+0x25/0x44 [ 369.949962] submit_bio_wait+0x53/0x7f [ 369.950469] blkdev_issue_flush+0x8a/0xae [ 369.951032] blkdev_fsync+0x2f/0x3a [ 369.951502] do_fsync+0x2e/0x47 [ 369.951887] __x64_sys_fsync+0x10/0x13 [ 369.952374] do_syscall_64+0x89/0x149 [ 369.952819] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 369.953492] RIP: 0033:0x7f95a1e729d4 [ 369.953996] Code: Bad RIP value. [ 369.954456] RSP: 002b:00007ffdb570dd48 EFLAGS: 00000246 ORIG_RAX: 000000000000004a [ 369.955506] RAX: ffffffffffffffda RBX: 000055c2139c6be0 RCX: 00007f95a1e729d4 [ 369.956389] RDX: 0000000000000001 RSI: 0000000000001261 RDI: 0000000000000004 [ 369.957325] RBP: 0000000000000002 R08: 0000000000000000 R09: 000055c2139c6ce0 [ 369.958199] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c2139c0380 [ 369.959143] R13: 0000000000000004 R14: 0000000000000100 R15: 0000000000000008 Cc: stable@vger.kernel.org Cc: Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
-
Jens Axboe authored
We're missing a deferred clear off the shallow get, which can cause a hang. Additionally, when we resize the sbitmap, we should also flush deferred clears for good measure. Ensure we have full coverage on batch clears, even for paths where we would not be doing deferred clear. This makes it less error prone for future additions. Reported-by:
-
- 11 Dec, 2018 8 commits
-
-
Igor Konopko authored
Ehen using pblk with 0 sized metadata both ppa list and meta list points to the same memory since pblk_dma_meta_size() returns 0 in that case. This patch fix that issue by ensuring that pblk_dma_meta_size() always returns space equal to sizeof(struct pblk_sec_meta) and thus ppa list and meta list points to different memory address. Even that in that case drive does not really care about meta_list pointer, this is the easiest way to fix that issue without introducing changes in many places in the code just for 0 sized metadata case. The same approach needs to be also done for pblk_get_sec_meta() since we also cannot point to the same memory address in meta buffer when we are using it for pblk recovery process Reported-by:
Hans Holmberg <hans.holmberg@cnexlabs.com> Tested-by:
Igor Konopko <igor.j.konopko@intel.com> Signed-off-by:
Matias Bjørling <mb@lightnvm.io> Signed-off-by:
-
Igor Konopko authored
pblk performs recovery of open lines by storing the LBA in the per LBA metadata field. Recovery therefore only works for drives that has this field. This patch adds support for packed metadata, which store l2p mapping for open lines in last sector of every write unit and enables drives without per IO metadata to recover open lines. After this patch, drives with OOB size <16B will use packed metadata and metadata size larger than16B will continue to use the device per IO metadata. Reviewed-by:
Javier González <javier@cnexlabs.com> Signed-off-by:
-
Igor Konopko authored
Currently pblk only check the size of I/O metadata and does not take into account if this metadata is in a separate buffer or interleaved in a single metadata buffer. In reality only the first scenario is supported, where second mode will break pblk functionality during any IO operation. This patch prevents pblk to be instantiated in case device only supports interleaved metadata. Reviewed-by:
-
Igor Konopko authored
Currently lightnvm and pblk uses single DMA pool, for which the entry size always is equal to PAGE_SIZE. The contents of each entry allocated from the DMA pool consists of a PPA list (8bytes * 64), leaving 56bytes * 64 space for metadata. Since the metadata field can be bigger, such as 128 bytes, the static size does not cover this use-case. This patch adds support for I/O metadata above 56 bytes by changing DMA pool size based on device meta size and allows pblk to use OOB metadata >=16B. Reviewed-by:
-
Igor Konopko authored
pblk currently assumes that size of OOB metadata on drive is always equal to size of pblk_sec_meta struct. This commit add helpers which will allow to handle different sizes of OOB metadata on drive in the future. After this patch only OOB metadata equal to 16 bytes is supported. Reviewed-by:
-
Igor Konopko authored
Currently DMA allocated memory is reused on partial read for lba_list_mem and lba_list_media arrays. In preparation for dynamic DMA pool sizes we need to move this arrays into pblk_pr_ctx structures. Reviewed-by:
-
Javier González authored
The current kref implementation around pblk global caches triggers a false positive on refcount_inc_checked() (when called) as the kref is initialized to 0. Instead of usint kref_inc() on a 0 reference, which is in principle correct, use kref_init() to avoid the check. This is also more explicit about what actually happens on cache creation. In the process, do a small refactoring to use kref helpers. Fixes: 1864de94 "lightnvm: pblk: stop recreating global caches" Signed-off-by:
-
Matias Bjørling authored
Currently the geometry of an OCSSD is enumerated using a two step approach: First, nvm_register is called, the OCSSD identify command is issued, and second the geometry sos and csecs values are read either from the OCSSD identify if it is a 1.2 drive, or from the NVMe namespace data structure if it is a 2.0 device. This patch recombines it into a single step, such that nvm_register can use the csecs and sos fields independent of which version is used. This enables one to dynamically size the lightnvm subsystem dma pool. Reviewed-by:
-
