- 17 Oct, 2022 11 commits
-
-
Matt Roper authored
We have a few registers that have existed for several hardware generations, but are only used by the driver on Xe_HP and beyond. In cases where the Xe_HP version of the register is now replicated and uses multicast behavior, but earlier generations were singleton, let's change the register prefix to "XEHP_" to help clarify that we're using the newer multicast form of the register. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-5-matthew.d.roper@intel.com
-
Matt Roper authored
Let's drop a few register definitions that are unused anywhere in the driver today. Since the referenced offsets are part of what is now considered a multicast register region, the current definitions would not be correct for use on any future platform. Signed-off-by:
-
Matt Roper authored
Starting in Xe_HP, several registers our driver works with have been converted from singleton registers into replicated registers with multicast behavior. Although the registers are still located at the same MMIO offsets as on previous platforms, let's duplicate the register definitions in preparation for upcoming patches that will handle multicast registers in a special manner. The registers that are now replicated on Xe_HP are: * PAT_INDEX (mslice replication) * FF_MODE2 (gslice replication) * COMMON_SLICE_CHICKEN3 (gslice replication) * SLICE_COMMON_ECO_CHICKEN1 (gslice replication) * SLICE_UNIT_LEVEL_CLKGATE (gslice replication) * LNCFCMOCS (lncf replication) Note that there are a couple places in selftest_mocs.c where the gen9 version of LNCFCMOCS is still used without regards for which platform we're on. Those cases are just doing an offset lookup and not issuing any CPU reads/writes of the register, so the potentially multicast nature of the register doesn't come into play. v2: - Add commit message note about the unconditional GEN9_LNCFCMOCS usage in selftest_mocs. (Bala) - Include some additional TLB registers. Bspec: 66534 Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Signed-off-by:
-
Matt Roper authored
Gen8 was the first time our hardware had multicast registers (or at least the first time the multicast nature was exposed and MMIO accesses could be steered). There are some registers that transitioned from singleton behavior to multicast during the gen7 -> gen8 transition; let's duplicate the register definitions for those registers in preparation for upcoming patches that will handle MCR registers in a special manner. The registers adjusted are: * MISCCPCTL * SAMPLER_INSTDONE * ROW_INSTDONE * ROW_CHICKEN2 * HALF_SLICE_CHICKEN1 * HALF_SLICE_CHICKEN3 v2: - Use the gen8 version of HALF_SLICE_CHICKEN3 in GVT's gen9 engine MMIO list. (Bala) - Update to the gen8 version of MISCCPCTL in a couple new workarounds that were recently added for DG2/PVC. (Bala) Signed-off-by:
-
Dale B Stimson authored
Extend hwmon power/energy for XEHPSDV especially per gt level energy usage. v2: Update to latest HWMON spec (Ashutosh) v3: Fix review comments (Ashutosh) v4: Fix review comments (Anshuman) v5: s/hwmon_device_register_with_info/ devm_hwmon_device_register_with_info/ (Ashutosh) v6: Change contact to intel-gfx (Rodrigo) GEN12_RPSTAT1 is available for all Gen12+ (Andi) Signed-off-by:Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
Dale B Stimson <dale.b.stimson@intel.com> Signed-off-by:
Badal Nilawar <badal.nilawar@intel.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
Ashutosh Dixit authored
Expose power1_max_interval, that is the tau corresponding to PL1, as a custom hwmon attribute. Some bit manipulation is needed because of the format of PKG_PWR_LIM_1_TIME in GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)). v2: Update date and kernel version in Documentation (Badal) v3: Cleaned up hwm_power1_max_interval_store() (Badal) v4: - Fixed review comments (Anshuman) - In hwm_power1_max_interval_store() get PKG_MAX_WIN from pkg_power_sku when it is valid (Ashutosh) - KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko) v5: On some of the DGFX setups it is seen that although pkg_power_sku is valid the field PKG_WIN_MAX is not populated. So it is decided to stick to default value of PKG_WIN_MAX (Ashutosh) v6: Change contact to intel-gfx (Rodrigo) Fixed variable types in hwm_power1_max_interval_store (Andi) Documented PKG_MAX_WIN_DEFAULT (Andi) Removed else in hwm_attributes_visible (Andi) Signed-off-by: -
Ashutosh Dixit authored
Expose the card reactive critical (I1) power. I1 is exposed as power1_crit in microwatts (typically for client products) or as curr1_crit in milliamperes (typically for server). v2: Add curr1_crit functionality (Ashutosh) v3: Use HWMON_CHANNEL_INFO to define power1_crit, curr1_crit (Badal) v4: Use hwm_ prefix for static functions (Ashutosh) v5: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko) v6: Change contact to intel-gfx (Rodrigo) Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Signed-off-by:
-
Dale B Stimson authored
Use i915 HWMON to display device level energy input. v2: Updated the date and kernel version in feature description v3: - Cleaned up hwm_energy function and removed unused function i915_hwmon_energy_status_get (Ashutosh) v4: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko) v5: Change contact to intel-gfx (Rodrigo) Change return type of hwm_energy to void (Andi) Signed-off-by:Riana Tauro <riana.tauro@intel.com> Signed-off-by:
-
Dale B Stimson authored
Use i915 HWMON to display/modify dGfx power PL1 limit and TDP setting. v2: - Fix review comments (Ashutosh) - Do not restore power1_max upon module unload/load sequence because on production systems modules are always loaded and not unloaded/reloaded (Ashutosh) - Fix review comments (Jani) - Remove endianness conversion (Ashutosh) v3: Add power1_rated_max (Ashutosh) v4: - Use macro HWMON_CHANNEL_INFO to define power channel (Guenter) - Update the date and kernel version in Documentation (Badal) v5: Use hwm_ prefix for static functions (Ashutosh) v6: Fix review comments (Ashutosh) v7: - Define PCU_PACKAGE_POWER_SKU for DG1,DG2 and move PKG_PKG_TDP to intel_mchbar_regs.h (Anshuman) - KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko) v8: Change contact to intel-gfx (Rodrigo) Minor change to val_sku_unit init (Andi) Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: -
Riana Tauro authored
Use i915 HWMON subsystem to display current input voltage. v2: - Updated date and kernel version in feature description - Fixed review comments (Ashutosh) v3: Use macro HWMON_CHANNEL_INFO to define hwmon channel (Guenter) v4: - Fixed review comments (Ashutosh) - Use hwm_ prefix for static functions (Ashutosh) v5: Added unit of voltage as millivolts (Ashutosh) v6: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko) v7: Change contact to intel-gfx (Rodrigo) GEN12_RPSTAT1 is available for all Gen12+ (Andi) Added Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon to MAINTAINERS Cc: Guenter Roeck <linux@roeck-us.net> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: -
Dale B Stimson authored
The i915 HWMON module will be used to expose voltage, power and energy values for dGfx. Here we set up i915 hwmon infrastructure including i915 hwmon registration, basic data structures and functions. v2: - Create HWMON infra patch (Ashutosh) - Fixed review comments (Jani) - Remove "select HWMON" from i915/Kconfig (Jani) v3: Use hwm_ prefix for static functions (Ashutosh) v4: s/#ifdef CONFIG_HWMON/#if IS_REACHABLE(CONFIG_HWMON)/ since the former doesn't work if hwmon is compiled as a module (Guenter) v5: Fixed review comments (Jani) v6: s/kzalloc/devm_kzalloc/ (Andi) v7: s/hwmon_device_register_with_info/ devm_hwmon_device_register_with_info/ (Ashutosh) Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
- 14 Oct, 2022 2 commits
-
-
Matthew Auld authored
On some platforms we potentially have different alignment restrictions depending on the memory type. We also now have different alignment restrictions for the same region across different kernel versions. Extend the region query to return the minimum required GTT alignment. Testcase: igt@gem_create@create-ext-placement-alignment Testcase: igt@i915_query@query-regions-sanity-check Suggested-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Michal Mrozek <michal.mrozek@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Yang A Shi <yang.a.shi@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Reviewed-by:
Nirmoy Das <nirmoy.das@intel.com> Acked-by:
Jordan Justen <jordan.l.justen@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221004114915.221708-2-matthew.auld@intel.com
-
Matthew Auld authored
It turns out that on production DG2/ATS HW we should have support for PS64. This feature allows to provide a 64K TLB hint at the PTE level, which is a lot more flexible than the current method of enabling 64K GTT pages for the entire page-table, since that leads to all kinds of annoying restrictions, as documented in: commit caa574ff Author: Matthew Auld <matthew.auld@intel.com> Date: Sat Feb 19 00:17:49 2022 +0530 drm/i915/uapi: document behaviour for DG2 64K support On discrete platforms like DG2, we need to support a minimum page size of 64K when dealing with device local-memory. This is quite tricky for various reasons, so try to document the new implicit uapi for this. With PS64, we can now drop the 2M GTT alignment restriction, and instead only require 64K or larger when dealing with lmem. We still use the compact-pt layout when possible, but only when we are certain that this doesn't interfere with userspace. Note that this is a change in uAPI behaviour, but hopefully shouldn't be a concern (IGT is at least able to autodetect the alignment), since we are only making the GTT alignment constraint less restrictive. Based on a patch from CQ Tang. v2: update the comment wrt scratch page v3: (Nirmoy) - Fix the selftest to actually use the random size, plus some comment improvements, also drop the rem stuff. Reported-by:
Michal Mrozek <michal.mrozek@intel.com> Signed-off-by:
-
- 12 Oct, 2022 1 commit
-
-
Andi Shyti authored
Commit 3e7abf81 ("drm/i915: Extract GT render power state management") removes the "trace_intel_gpu_freq_change()" trace points but their definition was left without users. Remove it. Suggested-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011135940.367048-1-andi.shyti@linux.intel.com
-
- 10 Oct, 2022 5 commits
-
-
Thomas Hellström authored
Commit 39a2bd34 ("drm/i915: Use the vma resource as argument for gtt binding / unbinding") introduced a regression that due to the vma resource tracking of the binding state, dpt ptes were not correctly repopulated. Fix this by clearing the vma resource state before repopulating. The state will subsequently be restored by the bind_vma operation. Fixes: 39a2bd34 ("drm/i915: Use the vma resource as argument for gtt binding / unbinding") Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220912121957.31310-1-thomas.hellstrom@linux.intel.com Cc: Matthew Auld <matthew.auld@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.18+ Reported-and-tested-by:
Kevin Boulain <kevinboulain@gmail.com> Tested-by:
David de Sousa <davidesousa@gmail.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
-
Vinay Belgaumkar authored
Read the values stored in the SLPC structures. Remove the fields that are no longer valid (like RPS interrupts) as well. v2: Move all functionality changes to this patch (Jani) v3: Fix compile warning and if condition (Jani) Signed-off-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Vinay Belgaumkar authored
Move it to the RPS source file. v2: Separate out code movement and functional changes (Jani) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Colin Ian King authored
The assignment to variable taken is redundant and so it can be removed as well as the variable too. Cleans up clang-scan build warnings: warning: Although the value stored to 'taken' is used in the enclosing expression, the value is never actually read from 'taken' [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
-
Colin Ian King authored
The variable ret is being assigned with a value that is never read both before and after a while-loop. The variable is being re-assigned inside the while-loop and afterwards on the call to the function i915_gem_object_lock_interruptible. Remove the redundants assignments. Cleans up clang scan-build warnings: warning: Although the value stored to 'ret' is used in the enclosing expression, the value is never actually read from 'ret' [deadcode.DeadStores] warning: Value stored to 'ret' is never read [deadcode.DeadStores] Signed-off-by:
-
- 06 Oct, 2022 2 commits
-
-
Matthew Auld authored
Restore the previous behaviour here where we compare the pci_resource_len() with the actual lmem_size, and not the dsm size, since dsm here is just some subset snipped off the end of the lmem. Otherwise we will incorrectly report an io_size > 0 on small-bar systems. It doesn't looks like MTL is expecting small-bar with its stolen memory, based on: GEM_BUG_ON(pci_resource_len(pdev, GEN12_LMEM_BAR) != SZ_256M) GEM_BUG_ON((dsm_size + SZ_8M) > lmem_size) So just move the HAS_BAR2_SMEM_STOLEN() check first, which then ignores the small bar part, and we can go back to checking lmem_size against the BAR size. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7007 Fixes: dbb2ffbf ("drm/i915/mtl: enable local stolen memory") Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221005153148.758822-2-matthew.auld@intel.com
-
Matthew Auld authored
The mask was added in commit e5f415bf ("drm/i915: Add missing mask when reading GEN12_DSMBASE"), but then looks to be dropped in some unrelated code movement in commit dbb2ffbf ("drm/i915/mtl: enable local stolen memory") without explanation. Add it back. Fixes: dbb2ffbf ("drm/i915/mtl: enable local stolen memory") Signed-off-by:
-
- 05 Oct, 2022 6 commits
-
-
Matthew Auld authored
On small-bar systems we could be given something non-mappable here, which leads to nasty oops. Make this nicer by checking if the resource is mappable or not, and return an error otherwise. v2: drop GEM_BUG_ON(flags & I915_BO_ALLOC_GPU_ONLY) Signed-off-by:
-
Matthew Auld authored
For these types of display buffers, we need to able to CPU access some part of the backing memory in prepare_plane_clear_colors(). As a result we need to ensure we always place in the mappable part of lmem, which becomes necessary on small-bar systems. v2(Nirmoy & Ville): - Add some commentary for why we need to CPU access the buffer. - Split out the other changes, so we just consider the display change here. v3: - Handle this in the dpt path. v4(Ville): - Drop the intel_fb_rc_ccs_cc_plane() sanity check in pin_and_fence_fb_obj(), since we can also trigger this on DG1 it seems. Fixes: eb1c535f ("drm/i915: turn on small BAR support") Reported-by:
Jianshui Yu <jianshui.yu@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
-
Matthew Auld authored
In the next patch we want to move the object (if the current resource is not compatible), to the mappable part of lmem for some display buffers. Currently that requires being able to unset the I915_BO_ALLOC_GPU_ONLY hint. Signed-off-by:
-
Matthew Auld authored
On platforms like DG2, it looks like the dpt path here is missing the migrate-to-lmem step on discrete platforms. v2: - Move the vma_pin() under the for_i915_gem_ww(), otherwise the object can be moved after dropping the lock and then doing the pin. Fixes: 33e7a975 ("drm/i915/xelpd: First stab at DPT support") Signed-off-by: -
Matthew Auld authored
The copy is async (if there even is one), but when later updating the GGTT we always sync against the binding, which will in turn sync against any moves. Signed-off-by:
-
Tvrtko Ursulin authored
Patch which added graceful exit for non-persistent contexts missed the fact it is not enough to set the exiting flag on a context and let the backend handle it from there. GuC backend cannot handle it because it runs independently in the firmware and driver might not see the requests ever again. Patch also missed the fact some usages of intel_context_is_banned in the GuC backend needed replacing with newly introduced intel_context_is_schedulable. Fix the first issue by calling into backend revoke when we know this is the last chance to do it. Fix the second issue by replacing intel_context_is_banned with intel_context_is_schedulable, which should always be safe since latter is a superset of the former. v2: * Just call ce->ops->revoke unconditionally. (Andrzej) Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221003121630.694249-1-tvrtko.ursulin@linux.intel.com
-
- 04 Oct, 2022 3 commits
-
-
Matt Roper authored
Intel hardware allows some preemption settings to be controlled either by the kernel-mode driver exclusively, or placed under control of the user-mode drivers; on Linux we always select the userspace control option. The various registers involved in this are not documented very clearly; let's add some clarifying comments to help explain how this all works and provide some history on why our Linux drivers take the approach they do (which I believe differs from the path taken by certain other operating systems' drivers). While we're at it, let's also remove the graphics version 12 upper bound on this programming. As described, we don't have any plans to move away from UMD control of preemption settings on future platforms, and there's currently no reason to believe that the hardware will fundamentally change how these registers and settings work after version 12. Bspec: 45921, 45858, 45863 Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Suggested-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Wayne Boyer <wayne.boyer@intel.com> Acked-by:
Tapani Pälli <tapani.palli@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907212410.22623-1-matthew.d.roper@intel.com
-
Matthew Auld authored
It looks like we need this for local-memory, if we want to use ptrace. Something more is still needed if we want to handle non-mappable memory, which looks quite annoying. v2: - ttm_bo_kmap doesn't seem to work well here, and seems to expect contiguous resource. v3(Andi): - s/PAGE_SIZE/bytes/ when passing in the size of the mapping. References: https://gitlab.freedesktop.org/drm/intel/-/issues/6989Signed-off-by: -
Gwan-gyeong Mun authored
Remove unused function prototype; intel_gt_create_kobj() Cc: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
-
- 03 Oct, 2022 10 commits
-
-
Daniele Ceraolo Spurio authored
The fw name is different and we need to record the fact that the blob is gsc-loaded, so add a new macro to help. Note: A-step DG2 G10 does not support HuC loading via GSC and would require a separate firmware to be loaded the legacy way, but that's not a production stepping so we're not going to bother. v2: rebase on new fw fetch logic Signed-off-by:
Tony Ye <tony.ye@intel.com> Reviewed-by:
Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-15-daniele.ceraolospurio@intel.com
-
Daniele Ceraolo Spurio authored
The current HuC status getparam return values are a bit confusing in regards to what happens in some scenarios. In particular, most of the error cases cause the ioctl to return an error, but a couple of them, INIT_FAIL and LOAD_FAIL, are not explicitly handled and neither is their expected return value documented; these 2 error cases therefore end up into the catch-all umbrella of the "HuC not loaded" case, with this case therefore including both some error scenarios and the load in progress one. The updates included in this patch change the handling so that all error cases behave the same way, i.e. return an errno code, and so that the HuC load in progress case is unambiguous. The patch also includes a small change to the FW init path to make sure we always transition to an error state if something goes wrong. Signed-off-by:
-
Daniele Ceraolo Spurio authored
Wait on the fence to be signalled to avoid the submissions finding HuC not yet loaded. v2: use dedicaded wait_queue_entry for waiting in HuC load, as submitq can't be re-used for it. Signed-off-by:
-
Daniele Ceraolo Spurio authored
Given that HuC load is delayed on DG2, this patch adds support for a fence that can be used to wait for load completion. No waiters are added in this patch (they're coming up in the next one), to keep the focus of the patch on the tracking logic. The full HuC loading flow on boot DG2 is as follows: 1) i915 exports the GSC as an aux device; 2) the mei-gsc driver is loaded on the aux device; 3) the mei-pxp component is loaded; 4) mei-pxp calls back into i915 and we load the HuC. Between steps 1 and 2 there can be several seconds of gap, mainly due to the kernel doing other work during the boot. The resume flow is slightly different, because we don't need to re-expose or re-probe the aux device, so we go directly to step 3 once i915 and mei-gsc have completed their resume flow. Here's an example of the boot timing, captured with some logs added to i915: [ 17.908307] [drm] adding GSC device [ 17.915717] [drm] i915 probe done [ 22.282917] [drm] mei-gsc bound [ 22.938153] [drm] HuC authenticated Also to note is that if something goes wrong during GSC HW init the mei-gsc driver will still bind, but steps 3 and 4 will not happen. The status tracking is done by registering a bus_notifier to receive a callback when the mei-gsc driver binds, with a large enough timeout to account for delays. Once mei-gsc is bound, we switch to a smaller timeout to wait for the mei-pxp component to load. The fence is signalled on HuC load complete or if anything goes wrong in any of the tracking steps. Timeout are enforced via hrtimer callbacks. v2: fix includes (Jani) v5: gsc_notifier() remove unneeded () Signed-off-by:
-
Daniele Ceraolo Spurio authored
The GSC will perform both the load and the authentication, so we just need to check the auth bit after the GSC has replied. Since we require the PXP module to load the HuC, the earliest we can trigger the load is during the pxp_bind operation. Note that GSC-loaded HuC survives GT reset, so we need to just mark it as ready when we re-init the GT HW. V2: move setting of HuC fw error state to the failure path of the HuC auth function, so it covers both the legacy and new auth flows V4: 1. Fix typo in the commit message 2. style fix in intel_huc_wait_for_auth_complete() Signed-off-by:
Vitaly Lubart <vitaly.lubart@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
-
Tomas Winkler authored
Add support for loading HuC via a pxp stream command. V4: 1. Remove unnecessary include in intel_pxp_huc.h (Jani) 2. Adjust copyright year to 2022 Signed-off-by:
-
Vitaly Lubart authored
Command to be sent via the stream interface are written to a local memory page, whose address is then provided to the GSC. The interface supports providing a full sg with multiple pages for both input and output messages, but since for now we only aim to support short and synchronous messages we can use a single page for both input and output. Note that the mei interface expects an sg of 4k pages, while our lmem pages are 64k. If we ever need to support more than 4k we'll need to convert. Added a TODO comment to the code to record this. Signed-off-by:
-
Daniele Ceraolo Spurio authored
The mei_pxp module is required to send the command to load authenticate the HuC to the GSC even if pxp is not in use for protected content management. Signed-off-by:
-
Tomas Winkler authored
With on-boards graphics card, both i915 and MEI are in the same device hierarchy with the same parent, while for discrete gfx card the MEI is its child device. Adjust the match function for that scenario by matching MEI parent device with i915. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-7-daniele.ceraolospurio@intel.com
-
Vitaly Lubart authored
The discrete graphics card with GSC firmware using command streamer API hence it requires to enhance pxp module with the new gsc_command() handler. The handler is implemented via mei_pxp_gsc_command() which is just a thin wrapper around mei_cldev_send_gsc_command() Signed-off-by:
-
