Use the dev_err_probe() helper, instead of open-coding the same
operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/2576cc15bdbb5be636640f491bcc087a334e2c02.1638959463.git.geert+renesas@glider.beSigned-off-by: Jakub Kicinski <kuba@kernel.org>

'more' is checked first.  When !more is checked immediately after that,
it is always true.  We should drop this check.
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20211208024732.142541-5-sakiwit@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Under both -Warray-bounds and the object_size sanitizer, the compiler is
upset about accessing prev/next of sk_buff when the object it thinks it
is coming from is sk_buff_head. The warning is a false positive due to
the compiler taking a conservative approach, opting to warn at casting
time rather than access time.

However, in support of enabling -Warray-bounds globally (which has
found many real bugs), arrange things for sk_buff so that the compiler
can unambiguously see that there is no intention to access anything
except prev/next.  Introduce and cast to a separate struct sk_buff_list,
which contains _only_ the first two fields, silencing the warnings:

In file included from ./include/net/net_namespace.h:39,
                 from ./include/linux/netdevice.h:37,
                 from net/core/netpoll.c:17:
net/core/netpoll.c: In function 'refill_skbs':
./include/linux/skbuff.h:2086:9: warning: array subscript 'struct sk_buff[0]' is partly outside array bounds of 'struct sk_buff_head[1]' [-Warray-bounds]
 2086 |         __skb_insert(newsk, next->prev, next, list);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/core/netpoll.c:49:28: note: while referencing 'skb_pool'
   49 | static struct sk_buff_head skb_pool;
      |                            ^~~~~~~~

This change results in no executable instruction differences.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211207062758.2324338-1-keescook@chromium.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The PHY settings table is supposed to be sorted by descending match
priority - in other words, earlier entries are preferred over later
entries.

The order of 1000baseKX/Full and 1000baseT/Full is such that we
prefer 1000baseKX/Full over 1000baseT/Full, but 1000baseKX/Full is
a lot rarer than 1000baseT/Full, and thus is much less likely to
be preferred.

This causes phylink problems - it means a fixed link specifying a
speed of 1G and full duplex gets an ethtool linkmode of 1000baseKX/Full
rather than 1000baseT/Full as would be expected - and since we offer
userspace a software emulation of a conventional copper PHY, we want
to offer copper modes in preference to anything else. However, we do
still want to allow the rarer modes as well.

Hence, let's reorder these two modes to prefer copper.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/E1muvFO-00F6jY-1K@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

xfrm4_fill_dst() and xfrm6_fill_dst() build dst,
getting a device reference that will likely be released
by standard dst_release() code.

We have to track these references or risk a warning if
CONFIG_NET_DEV_REFCNT_TRACKER=y

Note to XFRM maintainers :

Error path in xfrm6_fill_dst() releases the reference,
but does not clear xdst->u.dst.dev, so I wonder
if this could lead to double dev_put() in some cases,
where a dst_release() _is_ called by the callers in their
error path.

This extra dev_put() was added in commit 84c4a9df ("xfrm6:
release dev before returning error")

Fixes: 9038c320 ("net: dst: add net device refcount tracking to dst_entry")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <amwang@redhat.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Link: https://lore.kernel.org/r/20211207193203.2706158-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, can and netfilter.

  Current release - regressions:

   - bpf, sockmap: re-evaluate proto ops when psock is removed from
     sockmap

  Current release - new code bugs:

   - bpf: fix bpf_check_mod_kfunc_call for built-in modules

   - ice: fixes for TC classifier offloads

   - vrf: don't run conntrack on vrf with !dflt qdisc

  Previous releases - regressions:

   - bpf: fix the off-by-two error in range markings

   - seg6: fix the iif in the IPv6 socket control block

   - devlink: fix netns refcount leak in devlink_nl_cmd_reload()

   - dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"

   - dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports

  Previous releases - always broken:

   - ethtool: do not perform operations on net devices being
     unregistered

   - udp: use datalen to cap max gso segments

   - ice: fix races in stats collection

   - fec: only clear interrupt of handling queue in fec_enet_rx_queue()

   - m_can: pci: fix incorrect reference clock rate

   - m_can: disable and ignore ELO interrupt

   - mvpp2: fix XDP rx queues registering

  Misc:

   - treewide: add missing includes masked by cgroup -> bpf.h
     dependency"

* tag 'net-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
  net: dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports
  net: wwan: iosm: fixes unable to send AT command during mbim tx
  net: wwan: iosm: fixes net interface nonfunctional after fw flash
  net: wwan: iosm: fixes unnecessary doorbell send
  net: dsa: felix: Fix memory leak in felix_setup_mmio_filtering
  MAINTAINERS: s390/net: remove myself as maintainer
  net/sched: fq_pie: prevent dismantle issue
  net: mana: Fix memory leak in mana_hwc_create_wq
  seg6: fix the iif in the IPv6 socket control block
  nfp: Fix memory leak in nfp_cpp_area_cache_add()
  nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done
  nfc: fix segfault in nfc_genl_dump_devices_done
  udp: using datalen to cap max gso segments
  net: dsa: mv88e6xxx: error handling for serdes_power functions
  can: kvaser_usb: get CAN clock frequency from device
  can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter
  net: mvpp2: fix XDP rx queues registering
  vmxnet3: fix minimum vectors alloc issue
  net, neigh: clear whole pneigh_entry at alloc time
  net: dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"
  ...

Russell King says:

====================
net: phylink: introduce legacy mode flag

In March 2020, phylink gained support to split the PCS support out of
the MAC callbacks. By doing so, a slight behavioural difference was
introduced when a PCS is present, specifically:

1) the call to mac_config() when the link comes up or advertisement
   changes were eliminated
2) mac_an_restart() will never be called
3) mac_pcs_get_state() will never be called

The intention was to eventually remove this support once all phylink
users were converted. Unfortunately, this still hasn't happened - and
in some cases, it looks like it may never happen.

Through discussion with Sean Anderson, we now need to allow the PCS to
be optional for modern drivers, so we need a different way to identify
these legacy drivers - in that we wish to allow the "modern" behaviour
where mac_config() is not called on link-up events, even if there is
no PCS attached.

In order to do that, this series of patches introduce a
"legacy_pre_march2020" which is used to permit the old behaviour - in
other words, we get the old behaviour only when there is no PCS and
this flag is true. Otherwise, we get the new behaviour.

I decided to use the date of the change in the flag as just using
"legacy" or "legacy_driver" is too non-descript. An alternative could
be to use the git sha1 hash of the set of changes.

I believe I have added the legacy flag to all the drivers which use
legacy mode - that being the mtk_eth_soc ethernet driver, and many DSA
drivers - the ones which need the old behaviour are identified by
having non-NULL phylink_mac_link_state or phylink_mac_an_restart
methods in their dsa_switch_ops structure.

ag71xx and xilinx do not need the legacy flag. ag71xx is explained in
its own commit, and xilinx only updates the inband advertisement in
the mac_config() call, which is sufficient qualification to avoid it
being marked legacy.
====================

Link: https://lore.kernel.org/r/Ya+DGaGmGgWrlVkW@shell.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ag71xx may have a PCS, but it does not appear to support configuration
of the PCS in the current code. The functions to get its state merely
report that the link is down, and the AN restart function is empty.

Since neither of these functions will be called unless phylink's legacy
flag is set, we can safely remove these functions and indicate this is
a modern driver.

Should PCS support be added later, it will need to be modelled using
the phylink_pcs support rather than operating as a legacy driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use the legacy flag to indicate whether we should operate in legacy
mode. This allows us to stop using the presence of a PCS as an
indicator to the age of the phylink user, and make PCS presence
optional.

Legacy mode involves:
1) calling mac_config() whenever the link comes up
2) calling mac_config() whenever the inband advertisement changes,
   possibly followed by a call to mac_an_restart()
3) making use of mac_an_restart()
4) making use of mac_pcs_get_state()

All the above functionality was moved to a seperate "PCS" block of
operations in March 2020.

Update the documents to indicate that the differences that this flag
makes.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mtk_eth_soc has not been updated for commit 7cceb599 ("net: phylink:
avoid mac_config calls"), and makes use of state->speed and
state->duplex in contravention of the phylink documentation. This makes
reliant on the legacy behaviours, so mark it as a legacy driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The majority of DSA drivers do not make use of the PCS support, and
thus operate in legacy mode. In order to preserve this behaviour in
future, we need to set the legacy_pre_march2020 flag so phylink knows
this may require the legacy calls.

There are some DSA drivers that do make use of PCS support, and these
will continue operating as before - legacy_pre_march2020 will not
prevent split-PCS support enabling the newer phylink behaviour.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a boolean to phylink_config to indicate whether a driver has not
been updated for the changes in commit 7cceb599 ("net: phylink:
avoid mac_config calls"), and thus are reliant on the old behaviour.

We were currently keying the phylink behaviour on the presence of a
PCS, but this is sub-optimal for modern drivers that may not have a
PCS.

This commit merely introduces the new flag, but does not add any use,
since we need all legacy drivers to set this flag before it can be
used. Once these legacy drivers have been updated, we can remove this
flag.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull mtd fixes from Miquel Raynal:
 "MTD fixes:

   - dataflash: Add device-tree SPI IDs to avoid new warnings

  Raw NAND fixes:

   - Fix nand_choose_best_timings() on unsupported interface

   - Fix nand_erase_op delay (wrong unit)

   - fsmc:
      - Fix timing computation
      - Take instruction delay into account

   - denali:
      - Add the dependency on HAS_IOMEM to silence robots"

* tag 'mtd/fixes-for-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: dataflash: Add device-tree SPI IDs
  mtd: rawnand: fsmc: Fix timing computation
  mtd: rawnand: fsmc: Take instruction delay into account
  mtd: rawnand: Fix nand_choose_best_timings() on unsupported interface
  mtd: rawnand: Fix nand_erase_op delay
  mtd: rawnand: denali: Add the dependency on HAS_IOMEM

Pull HID fixes from Jiri Kosina:

 - fixes for various drivers which assume that a HID device is on USB
   transport, but that might not necessarily be the case, as the device
   can be faked by uhid. (Greg, Benjamin Tissoires)

 - fix for spurious wakeups on certain Lenovo notebooks (Thomas
   Weißschuh)

 - a few other device-specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for Elan touchscreen on Asus UX550VE
  HID: intel-ish-hid: ipc: only enable IRQ wakeup when requested
  HID: google: add eel USB id
  HID: add USB_HID dependancy to hid-prodikeys
  HID: add USB_HID dependancy to hid-chicony
  HID: bigbenff: prevent null pointer dereference
  HID: sony: fix error path in probe
  HID: add USB_HID dependancy on some USB HID drivers
  HID: check for valid USB device for many HID drivers
  HID: wacom: fix problems when device is not a valid USB device
  HID: add hid_is_usb() function to make it simpler for USB detection
  HID: quirks: Add quirk for the Microsoft Surface 3 type-cover

Pull netfslib fixes from David Howells:

 - Fix a lockdep warning and potential deadlock. This is takes the
   simple approach of offloading the write-to-cache done from within a
   network filesystem read to a worker thread to avoid taking the
   sb_writer lock from the cache backing filesystem whilst holding the
   mmap lock on an inode from the network filesystem.

   Jan Kara posits a scenario whereby this can cause deadlock[1], though
   it's quite complex and I think requires someone in userspace to
   actually do I/O on the cache files. Matthew Wilcox isn't so certain,
   though[2].

   An alternative way to fix this, suggested by Darrick Wong, might be
   to allow cachefiles to prevent userspace from performing I/O upon the
   file - something like an exclusive open - but that's beyond the scope
   of a fix here if we do want to make such a facility in the future.

 - In some of the error handling paths where netfs_ops->cleanup() is
   called, the arguments are transposed[3]. gcc doesn't complain because
   one of the parameters is void* and one of the values is void*.

Link: https://lore.kernel.org/r/20210922110420.GA21576@quack2.suse.cz/ [1]
Link: https://lore.kernel.org/r/Ya9eDiFCE2fO7K/S@casper.infradead.org/ [2]
Link: https://lore.kernel.org/r/20211207031449.100510-1-jefflexu@linux.alibaba.com/ [3]

* tag 'netfs-fixes-20211207' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  netfs: fix parameter of cleanup()
  netfs: Fix lockdep warning from taking sb_writers whilst holding mmap_lock

Clean up remaining headers that are specific to liblockdep but lived in
the shared header directory.  These are all unused after the liblockdep
code was removed in commit 7246f4dc ("tools/lib/lockdep: drop
liblockdep").

Note that there are still headers that were originally created for
liblockdep, that still have liblockdep references, but they are used by
other tools/ code at this point.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Martyn Welch reports that his CPU port is unable to link where it has
been necessary to use one of the switch ports with an internal PHY for
the CPU port. The reason behind this is the port control register is
left forcing the link down, preventing traffic flow.

This occurs because during initialisation, phylink expects the link to
be down, and DSA forces the link down by synthesising a call to the
DSA drivers phylink_mac_link_down() method, but we don't touch the
forced-link state when we later reconfigure the port.

Resolve this by also unforcing the link state when we are operating in
PHY mode and the PPU is set to poll the PHY to retrieve link status
information.
Reported-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Fixes: 3be98b2d ("net: dsa: Down cpu/dsa ports phylink will control")
Cc: <stable@vger.kernel.org> # 5.7: 2b29cb9e: net: dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1mvFhP-00F8Zb-Ul@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

M Chetan Kumar says:

====================
net: wwan: iosm: bug fixes

This patch series brings in IOSM driver bug fixes. Patch details are
explained below.

PATCH1: stop sending unnecessary doorbell in IP tx flow.
PATCH2: Restore the IP channel configuration after fw flash.
PATCH3: Removed the unnecessary check around control port TX transfer.
====================

Link: https://lore.kernel.org/r/20211209101629.2940877-1-m.chetan.kumar@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ev_cdev_write_pending flag is preventing a TX message post for
AT port while MBIM transfer is ongoing.

Removed the unnecessary check around control port TX transfer.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Devlink initialization flow was overwriting the IP traffic
channel configuration. This was causing wwan0 network interface
to be unusable after fw flash.

When device boots to fully functional mode restore the IP channel
configuration.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In TX packet accumulation flow transport layer is
giving a doorbell to device even though there is
no pending control TX transfer that needs immediate
attention.

Introduced a new hpda_ctrl_pending variable to keep
track of pending control TX transfer. If there is a
pending control TX transfer which needs an immediate
attention only then give a doorbell to device.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Avoid a memory leak if there is not a CPU port defined.

Fixes: 8d5f7954 ("net: dsa: felix: break at first CPU port during init and teardown")
Addresses-Coverity-ID: 1492897 ("Resource leak")
Addresses-Coverity-ID: 1492899 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211209110538.11585-1-jose.exposito89@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I won't have access to the relevant HW and docs much longer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Link: https://lore.kernel.org/r/20211209153546.1152921-1-jwi@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

For some reason, fq_pie_destroy() did not copy
working code from pie_destroy() and other qdiscs,
thus causing elusive bug.

Before calling del_timer_sync(&q->adapt_timer),
we need to ensure timer will not rearm itself.

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu:    0-....: (4416 ticks this GP) idle=60d/1/0x4000000000000000 softirq=10433/10434 fqs=2579
        (t=10501 jiffies g=13085 q=3989)
NMI backtrace for cpu 0
CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111
 nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62
 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
 rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343
 print_cpu_stall kernel/rcu/tree_stall.h:627 [inline]
 check_cpu_stall kernel/rcu/tree_stall.h:711 [inline]
 rcu_pending kernel/rcu/tree.c:3878 [inline]
 rcu_sched_clock_irq.cold+0x9d/0x746 kernel/rcu/tree.c:2597
 update_process_times+0x16d/0x200 kernel/time/timer.c:1785
 tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226
 tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428
 __run_hrtimer kernel/time/hrtimer.c:1685 [inline]
 __hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749
 hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811
 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline]
 __sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103
 sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097
 </IRQ>
 <TASK>
 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638
RIP: 0010:write_comp_data kernel/kcov.c:221 [inline]
RIP: 0010:__sanitizer_cov_trace_const_cmp1+0x1d/0x80 kernel/kcov.c:273
Code: 54 c8 20 48 89 10 c3 66 0f 1f 44 00 00 53 41 89 fb 41 89 f1 bf 03 00 00 00 65 48 8b 0c 25 40 70 02 00 48 89 ce 4c 8b 54 24 08 <e8> 4e f7 ff ff 84 c0 74 51 48 8b 81 88 15 00 00 44 8b 81 84 15 00
RSP: 0018:ffffc90000d27b28 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff888064bf1bf0 RCX: ffff888011928000
RDX: ffff888011928000 RSI: ffff888011928000 RDI: 0000000000000003
RBP: ffff888064bf1c28 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff875d8295 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8880783dd300 R14: 0000000000000000 R15: 0000000000000000
 pie_calculate_probability+0x405/0x7c0 net/sched/sch_pie.c:418
 fq_pie_timer+0x170/0x2a0 net/sched/sch_fq_pie.c:383
 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421
 expire_timers kernel/time/timer.c:1466 [inline]
 __run_timers.part.0+0x675/0xa20 kernel/time/timer.c:1734
 __run_timers kernel/time/timer.c:1715 [inline]
 run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558
 run_ksoftirqd kernel/softirq.c:921 [inline]
 run_ksoftirqd+0x2d/0x60 kernel/softirq.c:913
 smpboot_thread_fn+0x645/0x9c0 kernel/smpboot.c:164
 kthread+0x405/0x4f0 kernel/kthread.c:327
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
 </TASK>

Fixes: ec97ecf1 ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Cc: Sachin D. Patil <sdp.sachin@gmail.com>
Cc: V. Saicharan <vsaicharan1998@gmail.com>
Cc: Mohit Bhasi <mohitbhasi1998@gmail.com>
Cc: Leslie Monis <lesliemonis@gmail.com>
Cc: Gautam Ramakrishnan <gautamramk@gmail.com>
Link: https://lore.kernel.org/r/20211209084937.3500020-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If allocating the DMA buffer fails, mana_hwc_destroy_wq was called
without previously storing the pointer to the queue.

In order to avoid leaking the pointer to the queue, store it as soon as
it is allocated.

Addresses-Coverity-ID: 1484720 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/20211208223723.18520-1-jose.exposito89@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When an IPv4 packet is received, the ip_rcv_core(...) sets the receiving
interface index into the IPv4 socket control block (v5.16-rc4,
net/ipv4/ip_input.c line 510):

    IPCB(skb)->iif = skb->skb_iif;

If that IPv4 packet is meant to be encapsulated in an outer IPv6+SRH
header, the seg6_do_srh_encap(...) performs the required encapsulation.
In this case, the seg6_do_srh_encap function clears the IPv6 socket control
block (v5.16-rc4 net/ipv6/seg6_iptunnel.c line 163):

    memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));

The memset(...) was introduced in commit ef489749 ("ipv6: sr: clear
IP6CB(skb) on SRH ip4ip6 encapsulation") a long time ago (2019-01-29).

Since the IPv6 socket control block and the IPv4 socket control block share
the same memory area (skb->cb), the receiving interface index info is lost
(IP6CB(skb)->iif is set to zero).

As a side effect, that condition triggers a NULL pointer dereference if
commit 0857d6f8 ("ipv6: When forwarding count rx stats on the orig
netdev") is applied.

To fix that issue, we set the IP6CB(skb)->iif with the index of the
receiving interface once again.

Fixes: ef489749 ("ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211208195409.12169-1-andrea.mayer@uniroma2.itSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a
CPP area structure. But in line 807 (#2), when the cache is allocated
failed, this CPP area structure is not freed, which will result in
memory leak.

We can fix it by freeing the CPP area when the cache is allocated
failed (#2).

792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size)
793 {
794 	struct nfp_cpp_area_cache *cache;
795 	struct nfp_cpp_area *area;

800	area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0),
801 				  0, size);
	// #1: allocates and initializes

802 	if (!area)
803 		return -ENOMEM;

805 	cache = kzalloc(sizeof(*cache), GFP_KERNEL);
806 	if (!cache)
807 		return -ENOMEM; // #2: missing free

817	return 0;
818 }

Fixes: 4cb584e0 ("nfp: add CPP access core")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20211209061511.122535-1-niejianglei2021@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The done() netlink callback nfc_genl_dump_ses_done() should check if
received argument is non-NULL, because its allocation could fail earlier
in dumpit() (nfc_genl_dump_ses()).

Fixes: ac22ac46 ("NFC: Add a GET_SE netlink API")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211209081307.57337-1-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When kmalloc in nfc_genl_dump_devices() fails then
nfc_genl_dump_devices_done() segfaults as below

KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 25 Comm: kworker/0:1 Not tainted 5.16.0-rc4-01180-g2a987e65-dirty #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-6.fc35 04/01/2014
Workqueue: events netlink_sock_destruct_work
RIP: 0010:klist_iter_exit+0x26/0x80
Call Trace:
<TASK>
class_dev_iter_exit+0x15/0x20
nfc_genl_dump_devices_done+0x3b/0x50
genl_lock_done+0x84/0xd0
netlink_sock_destruct+0x8f/0x270
__sk_destruct+0x64/0x3b0
sk_destruct+0xa8/0xd0
__sk_free+0x2e8/0x3d0
sk_free+0x51/0x90
netlink_sock_destruct_work+0x1c/0x20
process_one_work+0x411/0x710
worker_thread+0x6fd/0xa80

Link: https://syzkaller.appspot.com/bug?id=fc0fa5a53db9edd261d56e74325419faf18bd0df
Reported-by: syzbot+f9f76f4a0766420b4a02@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211208182742.340542-1-tadeusz.struk@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The max number of UDP gso segments is intended to cap to UDP_MAX_SEGMENTS,
this is checked in udp_send_skb():

    if (skb->len > cork->gso_size * UDP_MAX_SEGMENTS) {
        kfree_skb(skb);
        return -EINVAL;
    }

skb->len contains network and transport header len here, we should use
only data len instead.

Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/900742e5-81fb-30dc-6e0b-375c6cdd7982@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Added default case to handle undefined cmode scenario in
mv88e6393x_serdes_power() and mv88e6393x_serdes_power() methods.

Addresses-Coverity: 1494644 ("Uninitialized scalar variable")
Fixes: 21635d92 (net: dsa: mv88e6xxx: Fix application of erratum 4.8 for 88E6393X)
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Link: https://lore.kernel.org/r/20211209041552.9810-1-amhamza.mgc@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-fixes-for-5.16-20211209' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
can 2021-12-09

Both patches are by Jimmy Assarsson. The first one fixes the
incrementing of the rx/tx error counters in the Kvaser PCIe FD driver.
The second one fixes the Kvaser USB driver by using the CAN clock
frequency provided by the device instead of using a hard coded value.

* tag 'linux-can-fixes-for-5.16-20211209' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: kvaser_usb: get CAN clock frequency from device
  can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter
====================

Link: https://lore.kernel.org/r/20211209081312.301036-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The CAN clock frequency is used when calculating the CAN bittiming
parameters. When wrong clock frequency is used, the device may end up
with wrong bittiming parameters, depending on user requested bittiming
parameters.

To avoid this, get the CAN clock frequency from the device. Various
existing Kvaser Leaf products use different CAN clocks.

Fixes: 080f40a6 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Link: https://lore.kernel.org/all/20211208152122.250852-2-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Check the direction bit in the error frame packet (EPACK) to determine
which net_device_stats {rx,tx}_errors counter to increase.

Fixes: 26ad340e ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Link: https://lore.kernel.org/all/20211208152122.250852-1-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().

Link: https://github.com/KSPP/linux/issues/162Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211208040311.GA169838@embeddedorSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().

Link: https://github.com/KSPP/linux/issues/162Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211208003527.GA75483@embeddedorSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Antoine Tenart says:

====================
net: track the queue count at unregistration

Those two patches allow to track the Rx and Tx queue count at
unregistration and help in detecting illegal addition of Tx queues after
unregister (a warning is added).

This follows discussions on the following thread,
https://lore.kernel.org/all/20211122162007.303623-1-atenart@kernel.org/T/

A patch fixing one issue linked to this was merged ealier,
https://lore.kernel.org/all/20211203101318.435618-1-atenart@kernel.org/T/
====================

Link: https://lore.kernel.org/r/20211207145725.352657-1-atenart@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Calling netdev_queue_update_kobjects is allowed during device
unregistration since commit 5c56580b ("net: Adjust TX queue kobjects
if number of queues changes during unregister"). But this is solely to
allow queue unregistrations. Any path attempting to add new queues after
a device started its unregistration should be fixed.

This patch adds a warning to detect such illegal use.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When updating Rx and Tx queue kobjects, the queue count should always be
updated to match the queue kobjects count. This was not done in the net
device unregistration path, fix it. Tracking all queue count updates
will allow in a following up patch to detect illegal updates.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>