This casting is not required.
Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Undo effects of misc_register if driver's init fails after
misc_register.
Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the last patch in the series of patches to move file-scope
variables into the driver state. This change will help to introduce
another version of the pipe driver (with different state) for the
older host interface or having several instances of this device.
Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a series of patches to move mutable file-scope variables
into the driver state. This change will help to introduce another
version of the pipe driver (with different state) for the older
host interface or having several instances of this device.
Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform: goldfish: pipe: Move the file-scope goldfish_interrupt_tasklet variable into the driver state

This is a series of patches to move mutable file-scope variables
into the driver state. This change will help to introduce another
version of the pipe driver (with different state) for the older
host interface or having several instances of this device.
Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add new GSMI commands (GSMI_CMD_LOG_S0IX_SUSPEND = 0xa,
GSMI_CMD_LOG_S0IX_RESUME = 0xb) that allow firmware to log any
information during S0ix suspend/resume paths.

Traditional ACPI suspend S3 involves BIOS both during the suspend and
the resume paths. However, modern suspend type like S0ix does not
involve firmware on either of the paths. This command gives the
firmware an opportunity to log any required information about the
suspend and resume operations e.g. wake sources.

Additionally, this change adds a module parameter to allow platforms
to specifically enable S0ix logging if required. This prevents any
other platforms from unnecessarily making a GSMI call which could have
any side-effects.

Tested by verifying that wake sources are correctly logged in eventlog.
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Rajat Jain <rajatja@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
[zwisler: update changelog for upstream]
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of selecting EFI and EFI_VARS automatically when GSMI is
enabled let that portion of the driver be conditionally compiled
if EFI and EFI_VARS are enabled.

This allows the rest of the driver (specifically event log) to
be used if EFI_VARS is not enabled.

To test:
1) verify that EFI_VARS is not automatically selected when
CONFIG_GOOGLE_GSMI is enabled
2) verify that the kernel boots on Link and that GSMI event log
is still available and functional
3) specifically boot the kernel on Alex to ensure it does not
try to load efivars and that gsmi also does not load because it
is not in the supported DMI table
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Olof Johansson <olofj@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Filipe Brandenburger <filbranden@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
[zwisler: update changelog for upstream]
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In order to use this coreboot needs board support for:
CONFIG_ELOG=y
CONFIG_ELOG_GSMI=y

And the kernel driver needs enabled:
CONFIG_GOOGLE_GSMI=y

To test, verify that clean shutdown event is added to the log:

> mosys eventlog list | grep 'Clean Shutdown'
11 | 2012-06-25 09:49:24 | Kernl Event | Clean Shutdown
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
[zwisler: update changelog for upstream]
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sysfs handler should return the number of bytes consumed, which in the
case of a successful write is the entire buffer.  Also fix a bug where
param.data_len was being set to (count - (2 * sizeof(u32))) instead of just
(count - sizeof(u32)).  The latter is correct because we skip over the
leading u32 which is our param.type, but we were also incorrectly
subtracting sizeof(u32) on the line where we were actually setting
param.data_len:

	param.data_len = count - sizeof(u32);

This meant that for our example event.kernel_software_watchdog with total
length 10 bytes, param.data_len was just 2 prior to this change.

To test, successfully append an event to the log with gsmi sysfs.
This sample event is for a "Kernel Software Watchdog"

> xxd -g 1 event.kernel_software_watchdog
0000000: 01 00 00 00 ad de 06 00 00 00

> cat event.kernel_software_watchdog > /sys/firmware/gsmi/append_to_eventlog

> mosys eventlog list | tail -1
14 | 2012-06-25 10:14:14 | Kernl Event | Software Watchdog
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
[zwisler: updated changelog for 2nd bug fix and upstream]
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I am one of the main engineers working on ashmem. I have been fixing
bugs in the driver and have been involved in the memfd conversion
discussions and sending patches about that. I also have an understanding
of the binder driver and was involved with some of the development on
finer grained locking. So I would like to be added to the MAINTAINERS
file for android drivers for review and maintenance of ashmem and other
Android drivers.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Todd Kjos <tkjos@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem_find_cell_by_index() is only called from inside an #ifdef,
so we get a build warning without CONFIG_OF:

drivers/nvmem/core.c:496:1: error: 'nvmem_find_cell_by_index' defined but not used [-Werror=unused-function]

Move it into the same #ifdef as the caller to avoid the warning.

Fixes: e888d445 ("nvmem: resolve cells from DT at registration time")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove a variable that's no longer used from lpc18xx_eeprom_remove().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We check if the pointer returned by __nvmem_device_get() is not NULL
while we should actually check if it is not IS_ERR(nvmem). Fix it.

While we're at it: fix the next error path where we should assign an
error value to cell before returning.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
[srinivas: rebased on top of next]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It is not safe to dereference an object before a null test. It is
not needed and just remove them. Ftrace can be used instead.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The check for ret < 0 is redundant as any places prior to this point
where ret is set to an error value the code will exit out of the loop
to the error exit label 'err'.  Remove this redundant dead code.

Detected by CoverityScan, CID#1339528 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of a local copy, use the memcat_p() helper to merge policy
node attributes.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds a helper to paste 2 pointer arrays together, useful for merging
various types of attribute arrays. There are a few places in the kernel
tree where this is open coded, and I just added one more in the STM class.

The naming is inspired by memset_p() and memcat(), and partial credit for
it goes to Andy Shevchenko.

This patch adds the function wrapped in a type-enforcing macro and a test
module.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix whitespace in the code for better readability, no functional changes.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the SPDX header to the STM class documentation.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The rules and order of identification of trace sources against the
"stp-policy" have changed; update the documentation to reflect that.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a document describing MIPI SyS-T protocol driver usage.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds ABI documentation for the new configfs attributes that come
with the MIPI SyS-T protocol driver.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds support for CLOCKSYNC SyS-T packets, that establish correlation
between the transport clock (STP timestamps) and SyS-T timestamps. These
packets are sent periodically to allow the decoder to keep both time
sources in sync.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds support for MIPI SyS-T protocol as specified in an open
standard [1]. In addition to marking message boundaries, it also
supports tagging messages with the source UUID, to provide better
distinction between trace sources, including payload length and
timestamp in the message's metadata.

This driver adds attributes to STP policy nodes to control/configure
these metadata features.

[1] https://www.mipi.org/specifications/sys-tSigned-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the default framing protocol is factored out into its own driver,
switch over to using the driver for writing data. To that end, make the
policy code require a valid protocol name (or absence thereof, which is
equivalent to "p_basic").

Also, to make transition easier, make stm class request "p_basic" module
at initialization time.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The STP framing pattern that the stm class implicitly applies to the
data payload is, in fact, a protocol. This patch moves the relevant code
out of the stm core into its own driver module.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a helper to write a sequence of bytes as STP data packets. This
is used by protocol drivers to output their metadata, as well as the
actual data payload.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

At the moment, the stm class applies a certain STP framing pattern to
the data as it is written to the underlying STM device. In order to
allow different framing patterns (aka protocols), this patch introduces
the concept of STP protocol drivers, defines data structures and APIs
for the protocol drivers to use.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Minor code shortening, no functional changes.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The current naming of stp-policy root type and group ops is confusing,
rename them for better readability.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, if no matching policy node can be found for a trace source,
we'll try to use "default" policy node, then, if that doesn't exist,
we'll pick the first node, in order of creation. If that also fails,
we'll allocate M/C range from the beginning of the device's M/C range.

This makes it difficult to know which node (if any) was used in any
particular case.

In order to make things more deterministic, the new order is as follows:
  * if they supply ID string, use that and nothing else,
  * if they are a task, use their task name (comm),
  * use "default", if it exists,
  * return failure, to let them know there is no suitable rule.

This should provide enough convenience with the "default" catch-all node,
while not leaving *everything* to chance. As a side effect, this relaxes
the requirement of using ioctl() for identification with the possibility of
using task names as policy nodes.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I wrote:
  "Char/Misc fixes for 4.19-rc7

   Here are 8 small fixes for some char/misc driver issues

   Included here are:
	- fpga driver fixes
	- thunderbolt bugfixes
	- firmware core revert/fix
	- hv core fix
	- hv tool fix

   All of these have been in linux-next with no reported issues."

* tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  thunderbolt: Initialize after IOMMUs
  thunderbolt: Do not handle ICM events after domain is stopped
  firmware: Always initialize the fw_priv list object
  docs: fpga: document fpga manager flags
  fpga: bridge: fix obvious function documentation error
  tools: hv: fcopy: set 'error' in case an unknown operation was requested
  fpga: do not access region struct after fpga_region_unregister
  Drivers: hv: vmbus: Use get/put_cpu() in vmbus_connect()

I wrote:
  "Serial driver fixes for 4.19-rc7

   Here are 3 small serial driver fixes for 4.19-rc7
    - 2 sh-sci bugfixes for reported issues
    - a revert of the PM handling for the 8250_dw code

   All of these have been in linux-next with no reported issues."

* tag 'tty-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: sh-sci: Allow for compressed SCIF address"
  Revert "serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE"
  Revert "serial: 8250_dw: Fix runtime PM handling"

I wrote:
  "USB fixes for 4.19-rc7

   Here are some small USB fixes for 4.19-rc7

   These include:
     - the usual xhci bugfixes for reported issues
     - some new serial driver device ids
     - bugfix for the option serial driver for some devices
     - bugfix for the cdc_acm driver that has been there for a long time.

   All of these have been in linux-next for a while with no reported
   issues."

* tag 'usb-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: xhci-mtk: resume USB3 roothub first
  xhci: Add missing CAS workaround for Intel Sunrise Point xHCI
  usb: cdc_acm: Do not leak URB buffers
  USB: serial: simple: add Motorola Tetra MTP6550 id
  USB: serial: option: add two-endpoints device-id flag
  USB: serial: option: improve Quectel EP06 detection

Wolfram writes:
  "i2c for 4.19

   I2C has three driver bugfixes and a fix for a typo for you."

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: Call i2c_dw_clk_rate() only when calculating timings
  i2c: i2c-scmi: fix for i2c_smbus_write_block_data
  i2c: i2c-isch: fix spelling mistake "unitialized" -> "uninitialized"
  i2c: i2c-qcom-geni: Properly handle DMA safe buffers

James writes:
  "SCSI fixes on 20181006

   Small fix for an unititialized mutex in the qedi driver."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qedi: Initialize the stats mutex lock

Michael writes:
  "powerpc fixes for 4.19 #4

   Four regression fixes.

   A fix for a change to lib/xz which broke our zImage loader when
   building with XZ compression. OK'ed by Herbert who merged the
   original patch.

   The recent fix we did to avoid patching __init text broke some 32-bit
   machines, fix that.

   Our show_user_instructions() could be tricked into printing kernel
   memory, add a check to avoid that.

   And a fix for a change to our NUMA initialisation logic, which causes
   crashes in some kdump configurations.

   Thanks to:
     Christophe Leroy, Hari Bathini, Jann Horn, Joel Stanley, Meelis
     Roos, Murilo Opsfelder Araujo, Srikar Dronamraju."

* tag 'powerpc-4.19-4' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/numa: Skip onlining a offline node in kdump path
  powerpc: Don't print kernel instructions in show_user_instructions()
  powerpc/lib: fix book3s/32 boot failure due to code patching
  lib/xz: Put CRC32_POLY_LE in xz_private.h