Pull "mvebu soc for 4.10 (part 1)" from Gregory CLEMENT:

remove legacy support of orion5x ls-chl

* tag 'mvebu-soc-4.10-1' of git://git.infradead.org/linux-mvebu:
  ARM: orion5x: remove legacy support of ls-chl

Pull "ARM: OXNAS SoC updates for 4.10" from Neil Armstrong:

- Add SMP support for the Oxford Semiconductor OX820 SoC
from http://lkml.kernel.org/r/20161021085848.1754-1-narmstrong@baylibre.com

Changes since v1 Pull Request at : http://lkml.kernel.org/r/1305c61f-b1ef-7caf-7788-67e2b907e873@baylibre.com
 - Clarify copyright dates in commit message
 - Remove linux/arch/... lines from the top of the files

* tag 'oxnas-arm-soc-for-4.10-v2' of https://github.com/OXNAS/linux:
  ARM: oxnas: Add OX820 config and makefile entry
  ARM: oxnas: Add OX820 SMP support

Since the ARTPEC-6 machine port already uses syscon,
MACH_ARTPEC6 should select MFD_SYSCON.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

Refactor the oxnas Kconfig entries among the OX810SE and OX820 configs,
and add the files to support the OX820 SMP feature.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

The Oxford Semiconductor OX820 is a ARM11MPcore based SoC sharing some
features with the OX810 earlier SoC.
This patch adds the core to wake up the second core.

Clarifications about Copyrights dates :
- hotplug.c was taken from an old versatile code by Ma Haijun and left verbatim
- headsmp.S was taken from an old versatile code and adapted by Ma Haijun
- platsmp.c is a mix from versatile code, Ma Haijun code and my code for DT
Hence the 2002/2003 ARM Coryrights and 2013 Ma Haijun Copyrights.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

This patch removes the legacy support of ls-chl which is converted to the
device tree.

[gregory.clement@free-electrons.com: removal extracted from a wider patch]
Signed-off-by: Ashley Hughes <ashley.hughes@blueyonder.co.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

mvebu drivers for 4.10 (part 1)

Clean-up on thegpio driver for old SoCs(non DT)

* tag 'mvebu-drivers-4.10-1' of git://git.infradead.org/linux-mvebu:
  ARM/orion/gpio: Replace three seq_printf() calls by seq_puts() in orion_gpio_dbg_show()
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-soc2-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Second Round of Renesas ARM Based SoC Updates for v4.10

* Basic support for r8a7745 SoC

* tag 'renesas-soc2-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: document SK-RZG1E board
  ARM: shmobile: r8a7745: basic SoC support
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.10/legacy-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Legacy platform_data removal for omaps for v4.10 merge window.
We've dropped the last legacy boot board-*.c files for mach-omap2
for v4.9 so now we can start removing the unused platform_data.

All of the below has been unused since v4.9 merge window:

- Drop legacy pmic init code
- Apply seq_puts() fixes for legacy mux code, then drop it
- Drop legacy serial init
- Drop legacy i2c init
- Drop legacy PM init
- Drop legacy twl4030 platform init
- Drop legacy USB host init
- Drop legacy muxing for tusb6010, n8x0 is still using it's
  platform init via pdata-quirks.c
- Drop legacy musb init
- Drop hwmod related legacy mux code
- Drop legacy hwmod data for omap3
- Drop legacy smsc911x and smc91x init
- Drop legacy board flash init
- Drop legacy ads7846 init
- Drop legacy sdram timings

* tag 'omap-for-v4.10/legacy-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
  ARM: OMAP2+: Drop legacy sdram timings
  ARM: OMAP2+: Drop legacy ads7846 init
  ARM: OMAP2+: Remove legacy board-flash.c
  ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support
  ARM: OMAP2+: Remove legacy data from hwmod for omap3
  ARM: OMAP2+: Remove legacy mux code
  ARM: OMAP2+: Remove legacy hwmod mux code
  ARM: OMAP2+: Remove legacy usb-musb.c platform init code
  ARM: OMAP2+: Remove legacy muxing for usb-tusb6010.c
  ARM: OMAP2+: Remove legacy usb-host.c platform init code
  ARM: OMAP2+: Remove legacy twl4030 platform init code
  ARM: OMAP2+: Remove legacy PM init
  ARM: OMAP2+: Remove legacy i2c.c platform init code
  ARM: OMAP2+: Remove legacy serial.c
  ARM: OMAP2+: mux: Use seq_putc() in omap_mux_dbg_signal_show()
  ARM: OMAP2+: mux: Replace three seq_printf() calls by seq_puts()
  ARM: OMAP: kill omap_pmic_init
  ARM: OMAP2: kill omap2_pmic_init
  ARM: OMAP3: kill omap3_pmic_init
  ARM: OMAP3: kill omap3_pmic_get_config and twl_{get,set}_voltage
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.10/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

SoC changes for omaps for v4.10 merge window:

- Add hwmod interconnect target wrapper module data for crypto
  accelerators for am3xxx, am43xx and dra7

- Add support for dra71x family of SoCs

- PM fixes for omap4/5 needed for omap5 cpuidle

* tag 'omap-for-v4.10/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: DRA7: hwmod: Do not register RTC on DRA71
  ARM: OMAP2+: board-generic: add support for DRA71x family
  ARM: AMx3xx: hwmod: Add data for RNG
  ARM: AM43xx: hwmod: Add data for DES
  ARM: OMAP: DRA7xx: Make L4SEC clock domain SWSUP only
  ARM: DRA7: hwmod: Add data for RNG IP
  ARM: DRA7: hwmod: Add data for SHA IP
  ARM: DRA7: hwmod: Add data for AES IP
  ARM: DRA7: hwmod: Add data for DES IP
  ARM: OMAP5: Add basic cpuidle MPU CSWR support
  ARM: OMAP4+: Fix bad fallthrough for cpuidle
  ARM: OMAP5: Fix mpuss_early_init
  ARM: OMAP5: Fix build for PM code
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'soc-for-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/soc

STM32 SOC updates for v4.10, round 1.

Highlights:
----------
 - Add new MCU SOC STM32F746

* tag 'soc-for-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: Kconfig: Introduce MACH_STM32F746 flag
  ARM: mach-stm32: Add a new SOC - STM32F746
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-soc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

i.MX SoC changes for 4.10:
 - Drop PL310_ERRATA_769419 for Vybrid, as it turns out that the SoC
   integrates revision r3p2 of the L2C-310, which is not affected by
   errata 769419.
 - Support perf for i.MX6 Multi-Mode DDR Controller (MMDC), so that we
   can profile memory access performance.
 - Support i.MX6ULL SoC using i.MX6UL base, since it's a derivative of
   i.MX6UL and pin-to-pin compatible with i.MX6UL.

* tag 'imx-soc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: mach-imx6ul: add imx6ull support
  ARM: imx: Drop errata 769419 for Vybrid
  ARM: imx: mmdc perf function support i.MX6QP
  ARM: imx: Added perf functionality to mmdc driver
Signed-off-by: Olof Johansson <olof@lixom.net>

- clean up mach-mediatek Makefile as kbuild only descends into the folder if
  ARCH_MEDIATEK is enabled

* tag 'v4.9-next-kconfig' of https://github.com/mbgg/linux-mediatek:
  ARM: mediatek: clean up mach-mediatek/Makefile
Signed-off-by: Olof Johansson <olof@lixom.net>

The EBI lookup is not longer in use: this has been moved to the
NAND chip driver. The syscon node is better accessed indirectly
using the regmap like the NAND chip driver does, so let's use
the syscon to set the modem control signals RTS/CTS through the
dedicated syscon register.

We also migrate the decoder status "SC_DEC" register that
enumerate the logic modules using syscon.

Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

This is the pxa changes for v4.10 cycle.

This cycle is covering :
 - some clock fixes common with sa1100 architecture
 - the consequence of the pxa_camera conversion to v4l2
 - a small irq related fix for pxa25x device-tree only

* tag 'pxa-for-4.10' of https://github.com/rjarzmik/linux:
  ARM: pxa: fix pxa25x interrupt init
  ARM: pxa: remove duplicated include from spitz.c
  ARM: pxa: em-x270: use the new pxa_camera platform_data
  ARM: pxa: ezx: use the new pxa_camera platform_data
  ARM: pxa: mioa701: use the new pxa_camera platform_data
  ARM: pxa: pxa_cplds: honor probe deferral
  ARM: sa11x0/pxa: get rid of get_clock_tick_rate
  watchdog: sa11x0/pxa: get rid of get_clock_tick_rate
  ARM: sa11x0/pxa: acquire timer rate from the clock rate
  clk: pxa25x: OSTIMER0 clocks from the main oscillator
Signed-off-by: Olof Johansson <olof@lixom.net>

NXP LPC32xx ARM SoC cleanup for v4.10

This includes a few cleanup changes:
* remove unused header file mach/irqs.h;
* remove unused header file clock.h.

* tag 'lpc32xx-cleanup-v4.10' of https://github.com/sylemieux/linux-lpc32xx:
  ARM: lpc32xx: remove unused header file clock.h
  ARM: lpc32xx: remove unused header file mach/irqs.h
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-soc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Renesas ARM Based SoC Updates for v4.10

Enhancements:
* Basic support for r8a7743 SoC; only SoC code so far
* Select errata 798181 for SoCs with CA15 cores

Clean-up:
* Consolidate R8A7743 and R8A779[234] machine definitions

Documentation:
* Add Marzen, Gose and Alt board part numbers to DT bindings
* Document SK-RZG1M board

* tag 'renesas-soc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7779/marzen: Add board part number to DT bindings
  ARM: shmobile: select errata 798181 for SoCs with CA15 cores
  ARM: shmobile: Consolidate R8A7743 and R8A779[234] machine definitions
  ARM: shmobile: r8a7793/gose: Add board part number to DT bindings
  ARM: shmobile: r8a7794/alt: Add board part number to DT bindings
  ARM: shmobile: document SK-RZG1M board
  ARM: shmobile: r8a7743: basic SoC support
  ARM: shmobile: only call rcar_gen2_clocks_init() if present
  ARM: shmobile: Sort Kconfig selections
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch introduces the MACH_STM32F746 to make possible to only select
STM32F746 pinctrl driver

By default, all the MACH_STM32Fxxx flags will be set with STM32 defconfig.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>

Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>

Document the SK-RZG1E device tree bindings, listing it as a supported board.

This allows to use checkpatch.pl to validate .dts files referring to the
SK-RZG1E board.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add minimal support for the RZ/G1E (R8A7745) SoC.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

imx6ull is derived SoC from imx6ul.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

According to the datasheet, VF610 uses revision r3p2 of the L2C-310
block, same as i.MX6Q+, which does not require a software workaround for
ARM errata 769419.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

i.MX6QP added new register bit PROFILE_SEL in MADPCR0.
need set it at perf start.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

These are no longer used. If somebody needs to configure
memory timings for various idle modes, they should be
implemented as a device driver callbacks from the PM
code.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Legacy board files in mach-omap2 used the helper functions
board_{nor,nand,onenand}_init() to initialize the flash
devices attached to the GPMC.

With Device Tree booting the initialization is handled by
the GPMC driver gpmc_probe_*_child() functions so this
code is not needed anymore now that OMAP2+ is DT-only.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

When connecting an ethernet chip to the GPMC, such as smc91x
or smsc911x, a GPIO has to be requested to be used as an IRQ
and also the IO memory for a GPMC chip-select.

When booting with DT the chip-select allocation is handled
in a generic manner in the GPMC driver and the GPIO to IRQ
mapping is made by the DT core so this code is not needed
anymore now that mach-omap2 related boards are DT-only.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This data is now coming from device tree so we can remove the
duplicate data. Let's keep the DSS and DMA related things for now
until those have been converted to device tree completely.

While at it, let's also add the trailing commas to data structures
so further processing with scripts will be a bit easier.

Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

All the boards booting with device tree use
drivers/pinctrl-single.c instead.

Note that mach-omap1 is still using the legacy mux,
so let's move the related Kconfig options from plat-omap
to mach-omap1.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is no longer needed when booted with device tree.

Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is no longer needed when booted with device tree.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We are moving to device tree based booting, and this should be
done using pinctrl-single instead.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is no longer needed when booted with device tree.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This code is no longer used and can be removed as we
are using device tree.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is no longer needed when booted with device tree.
And let's replace cpu_is with soc_is for the PM code to
avoid confusion, they do the same thing.

Note that omap_pmic_late_init() now just calls
omap3_twl_init() and omap4_twl_init() to initialize the
voltage layer so we can remove the remaining references
to twl-common code and remove it in the following patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now initialize I2C for mach-omap2 using device tree. And we
can move the remaining code in plat-omap/i2c.c into mach-omap1/i2c.c.

Note that we cannot remove some of the I2C bus reset functions
as they are being used by hwmod code.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now initialize the UARTs using device tree.
Signed-off-by: Tony Lindgren <tony@atomide.com>

RTC is not available on DRA71x, so accessing any of the RTC
register or clkctrl register will lead to a crash. So, do not
register RTC hwmod for DRA71x.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>