- 24 May, 2021 2 commits
-
-
Davide Caratti authored
the following script: # tc qdisc add dev eth0 handle 0x1 root fq_pie flows 2 # tc qdisc add dev eth0 clsact # tc filter add dev eth0 egress matchall action skbedit priority 0x10002 # ping 192.0.2.2 -I eth0 -c2 -w1 -q produces the following splat: BUG: KASAN: slab-out-of-bounds in fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie] Read of size 4 at addr ffff888171306924 by task ping/942 CPU: 3 PID: 942 Comm: ping Not tainted 5.12.0+ #441 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x92/0xc1 print_address_description.constprop.7+0x1a/0x150 kasan_report.cold.13+0x7f/0x111 fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie] __dev_queue_xmit+0x1034/0x2b10 ip_finish_output2+0xc62/0x2120 __ip_finish_output+0x553/0xea0 ip_output+0x1ca/0x4d0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x1c4b/0x2d00 sock_sendmsg+0xdb/0x110 __sys_sendto+0x1d7/0x2b0 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fe69735c3eb Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 75 42 2c 00 41 89 ca 8b 00 85 c0 75 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 41 57 4d 89 c7 41 56 41 89 RSP: 002b:00007fff06d7fb38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055e961413700 RCX: 00007fe69735c3eb RDX: 0000000000000040 RSI: 000055e961413700 RDI: 0000000000000003 RBP: 0000000000000040 R08: 000055e961410500 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff06d81260 R13: 00007fff06d7fb40 R14: 00007fff06d7fc30 R15: 000055e96140f0a0 Allocated by task 917: kasan_save_stack+0x19/0x40 __kasan_kmalloc+0x7f/0xa0 __kmalloc_node+0x139/0x280 fq_pie_init+0x555/0x8e8 [sch_fq_pie] qdisc_create+0x407/0x11b0 tc_modify_qdisc+0x3c2/0x17e0 rtnetlink_rcv_msg+0x346/0x8e0 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff888171306800 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 36 bytes to the right of 256-byte region [ffff888171306800, ffff888171306900) The buggy address belongs to the page: page:00000000bcfb624e refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x171306 head:00000000bcfb624e order:1 compound_mapcount:0 flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0010200 dead000000000100 dead000000000122 ffff888100042b40 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888171306800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888171306880: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc >ffff888171306900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888171306980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888171306a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fix fq_pie traffic path to avoid selecting 'q->flows + q->flows_cnt' as a valid flow: it's an address beyond the allocated memory. Fixes: ec97ecf1 ("net: sched: add Flow Queue PIE packet scheduler") CC: stable@vger.kernel.org Signed-off-by:Davide Caratti <dcaratti@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
the patch that fixed an endless loop in_fq_pie_init() was not considering that 65535 is a valid class id. The correct bugfix for this infinite loop is to change 'idx' to become an u32, like Colin proposed in the past [1]. Fix this as follows: - restore 65536 as maximum possible values of 'flows_cnt' - use u32 'idx' when iterating on 'q->flows' - fix the TDC selftest This reverts commit bb2f930d. [1] https://lore.kernel.org/netdev/20210407163808.499027-1-colin.king@canonical.com/ CC: Colin Ian King <colin.king@canonical.com> CC: stable@vger.kernel.org Fixes: bb2f930d ("net/sched: fix infinite loop in sch_fq_pie") Fixes: ec97ecf1 ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by:
-
- 23 May, 2021 3 commits
-
-
Zong Li authored
If runtime power menagement is enabled, the gigabit ethernet PLL would be disabled after macb_probe(). During this period of time, the system would hang up if we try to access GEMGXL control registers. We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of sleep inside atomic section (7fa2955f ("sh_eth: Fix sleeping function called from invalid context"). Add netif_running checking to ensure the device is available before accessing GEMGXL device. Changed in v2: - Use netif_running instead of its own flag Signed-off-by:
Zong Li <zong.li@sifive.com> Signed-off-by:
-
Stefan Roese authored
The MT7628/88 SoC(s) have other (limited) packet counter registers than currently supported in the mtk_eth_soc driver. This patch adds support for reading these registers, so that the packet statistics are correctly updated. Additionally the defines for the non-MT7628 variant packet counter registers are added and used in this patch instead of using hard coded values. Signed-off-by:
Stefan Roese <sr@denx.de> Fixes: 296c9120 ("net: ethernet: mediatek: Add MT7628/88 SoC support") Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Reto Schneider <code@reto-schneider.ch> Cc: Reto Schneider <reto.schneider@husqvarnagroup.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Vinicius Costa Gomes authored
Add Vinicius Costa Gomes as maintainer for these qdiscs. These qdiscs are all TSN (Time Sensitive Networking) related. Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
-
- 21 May, 2021 8 commits
-
-
Francesco Ruggeri authored
Commit dbd1759e ("ipv6: on reassembly, record frag_max_size") filled the frag_max_size field in IP6CB in the input path. The field should also be filled in case of atomic fragments. Fixes: dbd1759e ('ipv6: on reassembly, record frag_max_size') Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Signed-off-by:
-
Íñigo Huguet authored
SFC driver can be configured via modparam to work using MSI-X, MSI or legacy IRQ interrupts. In the last one, the interrupt was not properly released on module remove. It was not freed because the flag irqs_hooked was not set during initialization in the case of using legacy IRQ. Example of (trimmed) trace during module remove without this fix: remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1' WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170 ...trimmed... Call Trace: unregister_irq_proc+0xe3/0x100 free_desc+0x29/0x70 irq_free_descs+0x47/0x70 mp_unmap_irq+0x58/0x60 acpi_unregister_gsi_ioapic+0x2a/0x40 acpi_pci_irq_disable+0x78/0xb0 pci_disable_device+0xd1/0x100 efx_pci_remove+0xa1/0x1e0 [sfc] pci_device_remove+0x38/0xa0 __device_release_driver+0x177/0x230 driver_detach+0xcb/0x110 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x2a/0xb0 efx_exit_module+0x24/0xf40 [sfc] __do_sys_delete_module.constprop.0+0x171/0x280 ? exit_to_user_mode_prepare+0x83/0x1d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9f9385800b ...trimmed... Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Signed-off-by:
-
Rao Shoaib authored
When TCP is used as transport and a program on the system connects to RDS port 16385, connection is accepted but denied per the rules of RDS. However, RDS connections object is left in the list. Next loopback connection will select that connection object as it is at the head of list. The connection attempt will hang as the connection object is set to connect over TCP which is not allowed The issue can be reproduced easily, use rds-ping to ping a local IP address. After that use any program like ncat to connect to the same IP address and port 16385. This will hang so ctrl-c out. Now try rds-ping, it will hang. To fix the issue this patch adds checks to disallow the connection object creation and destroys the connection object. Signed-off-by:
Rao Shoaib <rao.shoaib@oracle.com> Signed-off-by:
-
Ioana Ciornei authored
Remove Ioana Radulescu from dpaa2-eth since she is no longer working on the DPAA2 set of drivers. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Aleksander Jan Bajkowski authored
In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter. Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver ") Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
-
Florian Fainelli authored
We cannot call bcm_sf2_reg_rgmii_cntrl() for a port that is not RGMII, yet we do that in bcm_sf2_sw_mac_link_up() irrespective of the port's interface. Move that read until we have properly qualified the PHY interface mode. This avoids triggering a warning on 7278 platforms that have GMII ports. Fixes: 55cfeb39 ("net: dsa: bcm_sf2: add function finding RGMII register") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
-
Julian Wiedmann authored
Discussions for network-related code should include the netdev list. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Stefan Roese authored
When updating to latest mainline for some testing on the GARDENA smart gateway based on the MT7628, I noticed that ethernet does not work any more. Commit e9229ffd ("net: ethernet: mtk_eth_soc: implement dynamic interrupt moderation") introduced this problem, as it missed the RX_DIM & TX_DIM configuration for this SoC variant. This patch fixes this by calling mtk_dim_rx() & mtk_dim_tx() in this case as well. Signed-off-by:
-
- 20 May, 2021 7 commits
-
-
David S. Miller authored
Joakim Zhang says: ==================== net: fixes for stmmac Two clock fixes for stmmac driver. ==================== Signed-off-by: -
Joakim Zhang authored
Fix system hang with below sequences: ~# ifconfig ethx down ~# ifconfig ethx hw ether xx:xx:xx:xx:xx:xx After ethx down, stmmac all clocks gated off and then register access causes system hang. Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
-
Joakim Zhang authored
This should be a mistake to fix conflicts when removing RFC tag to repost the patch. Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Signed-off-by:
-
Zheyu Ma authored
When calling the 'ql_sem_spinlock', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. The KASAN's log reveals it: [ 3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002 [ 3.238748 ] 2 locks held by swapper/0/1: [ 3.239151 ] #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x41/0x60 [ 3.240026 ] #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at: ql3xxx_probe+0x2aa/0xea0 [ 3.240873 ] Modules linked in: [ 3.241187 ] irq event stamp: 460854 [ 3.241541 ] hardirqs last enabled at (460853): [<ffffffff843051bf>] _raw_spin_unlock_irqrestore+0x4f/0x70 [ 3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>] _raw_spin_lock_irqsave+0x2a/0x70 [ 3.242245 ] softirqs last enabled at (446076): [<ffffffff846002e4>] __do_softirq+0x2e4/0x4b1 [ 3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>] irq_exit_rcu+0x100/0x110 [ 3.242245 ] Preemption disabled at: [ 3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] Kernel panic - not syncing: scheduling while atomic [ 3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00145 -gee7dc339169-dirty #16 [ 3.242245 ] Call Trace: [ 3.242245 ] dump_stack+0xba/0xf5 [ 3.242245 ] ? ql3xxx_probe+0x1f0/0xea0 [ 3.242245 ] panic+0x15a/0x3f2 [ 3.242245 ] ? vprintk+0x76/0x150 [ 3.242245 ] ? ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] __schedule_bug+0xae/0xe0 [ 3.242245 ] __schedule+0x72e/0xa00 [ 3.242245 ] schedule+0x43/0xf0 [ 3.242245 ] schedule_timeout+0x28b/0x500 [ 3.242245 ] ? del_timer_sync+0xf0/0xf0 [ 3.242245 ] ? msleep+0x2f/0x70 [ 3.242245 ] msleep+0x59/0x70 [ 3.242245 ] ql3xxx_probe+0x307/0xea0 [ 3.242245 ] ? _raw_spin_unlock_irqrestore+0x3a/0x70 [ 3.242245 ] ? pci_device_remove+0x110/0x110 [ 3.242245 ] local_pci_probe+0x45/0xa0 [ 3.242245 ] pci_device_probe+0x12b/0x1d0 [ 3.242245 ] really_probe+0x2a9/0x610 [ 3.242245 ] driver_probe_device+0x90/0x1d0 [ 3.242245 ] ? mutex_lock_nested+0x1b/0x20 [ 3.242245 ] device_driver_attach+0x68/0x70 [ 3.242245 ] __driver_attach+0x124/0x1b0 [ 3.242245 ] ? device_driver_attach+0x70/0x70 [ 3.242245 ] bus_for_each_dev+0xbb/0x110 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] driver_attach+0x27/0x30 [ 3.242245 ] bus_add_driver+0x1eb/0x2a0 [ 3.242245 ] driver_register+0xa9/0x180 [ 3.242245 ] __pci_register_driver+0x82/0x90 [ 3.242245 ] ? yellowfin_init+0x25/0x25 [ 3.242245 ] ql3xxx_driver_init+0x23/0x25 [ 3.242245 ] do_one_initcall+0x7f/0x3d0 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.242245 ] kernel_init_freeable+0x2aa/0x301 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] kernel_init+0x18/0x190 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ret_from_fork+0x1f/0x30 [ 3.242245 ] Dumping ftrace buffer: [ 3.242245 ] (ftrace buffer empty) [ 3.242245 ] Kernel Offset: disabled [ 3.242245 ] Rebooting in 1 seconds. Reported-by:Zheyu Ma <zheyuma97@gmail.com> Signed-off-by:
-
Aditya Srivastava authored
The opening comment mark '/**' is used for highlighting the beginning of kernel-doc comments. The header for drivers/net/ethernet/microchip/encx24j600 files follows this syntax, but the content inside does not comply with kernel-doc. This line was probably not meant for kernel-doc parsing, but is parsed due to the presence of kernel-doc like comment syntax(i.e, '/**'), which causes unexpected warning from kernel-doc. For e.g., running scripts/kernel-doc -none drivers/net/ethernet/microchip/encx24j600_hw.h emits: warning: expecting prototype for h(). Prototype was for _ENCX24J600_HW_H() instead Provide a simple fix by replacing such occurrences with general comment format, i.e. '/*', to prevent kernel-doc from parsing it. Signed-off-by:
Aditya Srivastava <yashsri421@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Jesse Brandeburg authored
Check that the MTU value requested by the VF is in the supported range of MTUs before attempting to set the VF large packet enable, otherwise reject the request. This also avoids unnecessary register updates in the case of the 82599 controller. Fixes: 872844dd ("ixgbe: Enable jumbo frames support w/ SR-IOV") Co-developed-by:
Piotr Skajewski <piotrx.skajewski@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
David Matlack authored
Building the nci test suite produces a binary, nci_dev, that git then tries to track. Add a .gitignore file to tell git to ignore this binary. Signed-off-by:
David Matlack <dmatlack@google.com> Signed-off-by:
-
- 19 May, 2021 20 commits
-
-
Johan Hovold authored
Commit 31db0dbd ("net: hso: check for allocation failure in hso_create_bulk_serial_device()") recently started returning an error when the driver fails to allocate resources for the interrupt endpoint and tiocmget functionality. For consistency let's bail out from probe also if the URB allocation fails. Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Geert Uytterhoeven authored
Update Sergei's email address, as per commit 534a8bf0 ("MAINTAINERS: switch to my private email for Renesas Ethernet drivers"). Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by:
-
Raju Rangoju authored
Hardware register having the server TID base can contain invalid values when adapter is in bad state (for example, due to AER fatal error). Reading these invalid values in the register can lead to out-of-bound memory access. So, fix by using the saved server TID base when clearing filters. Fixes: b1a79360 ("cxgb4: Delete all hash and TCAM filters before resource cleanup") Signed-off-by:
Raju Rangoju <rajur@chelsio.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5 fixes 2021-05-18 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: -
YueHaibing authored
data->ctrl_stats should be memset with correct size. Fixes: bfad2b97 ("ethtool: add interface to read standard MAC Ctrl stats") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
It's not correct to call napi_schedule() in pure process context. Because we use __raise_softirq_irqoff() we require callers to be in a context which will eventually lead to softirq handling (hardirq, bh disabled, etc.). With code as is users will see: NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! Fixes: a8dd7ac1 ("net/mlx5e: Generalize RQ activation") Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Ariel Levkovich authored
Termination tables are restricted to have the default miss action and cannot be set to forward to another table in case of a miss. If the fs prio of the termination table is not the last one in the list, fs_core will attempt to attach it to another table. Set the unmanaged ft flag when creating the termination table ft and select the tc offload prio for it to prevent fs_core from selecting the forwarding to next ft miss action and use the default one. In addition, set the flow that forwards to the termination table to ignore ft level restrictions since the ft level is not set by fs_core for unamanged fts. Fixes: 249ccc3c ("net/mlx5e: Add support for offloading traffic from uplink to uplink") Signed-off-by:
Ariel Levkovich <lariel@nvidia.com>
-
Leon Romanovsky authored
During driver probe of device that has dynamic MSI-X feature enabled, the following error is printed in some FW flavour (not released yet). mlx5_core 0000:06:00.0: firmware version: 4.7.4387 mlx5_core 0000:06:00.0: 126.016 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x16 link) mlx5_core 0000:06:00.0: mlx5_cmd_check:777:(pid 70599): SET_HCA_CAP(0x109) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x0) mlx5_core 0000:06:00.0: set_hca_cap:622:(pid 70599): handle_hca_cap failed mlx5_core 0000:06:00.0: mlx5_function_setup:1045:(pid 70599): set_hca_cap failed mlx5_core 0000:06:00.0: probe_one:1465:(pid 70599): mlx5_init_one failed with error code -22 mlx5_core: probe of 0000:06:00.0 failed with error -22 In order to make the setting capability of MSI-X future proof, let's query the current capabilities first. Fixes: 604774ad ("net/mlx5: Dynamically assign MSI-X vectors count") Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Eli Cohen authored
net/mlx5: Expose MPFS configuration API MPFS is the multi physical function switch that bridges traffic between the physical port and any physical functions associated with it. The driver is required to add or remove MAC entries to properly forward incoming traffic to the correct physical function. We export the API to control MPFS so that other drivers, such as mlx5_vdpa are able to add MAC addresses of their network interfaces. The MAC address of the vdpa interface must be configured into the MPFS L2 address. Failing to do so could cause, in some NIC configurations, failure to forward packets to the vdpa network device instance. Fix this by adding calls to update the MPFS table. CC: <mst@redhat.com> CC: <jasowang@redhat.com> CC: <virtualization@lists.linux-foundation.org> Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by:
Eli Cohen <elic@nvidia.com> Signed-off-by:
-
Aya Levin authored
Avoid division by zero in the error flow. In the driver TC number can be either 1 or 8. When TC count is set to 1, driver zero netdev->num_tc. Hence, need to convert it back from 0 to 1 in the error flow. Fixes: fa374877 ("net/mlx5e: Handle errors from netif_set_real_num_{tx,rx}_queues") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by:
-
Vlad Buslov authored
Rules with MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE dest flag are translated to destination FT in eswitch. Currently it is not possible to mirror such rules because firmware doesn't support mixing FT and Vport destinations in single rule when one of them adds encapsulation. Since the only use case for MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE destination is support for tunnel endpoints on VF and trying to offload such rule with mirror action causes either crash in fs_core or firmware error with syndrome 0xff6a1d, reject all such rules in mlx5 TC layer. Fixes: 10742efc ("net/mlx5e: VF tunnel TX traffic offloading") Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
-
Dima Chumak authored
When handling FIB_EVENT_ENTRY_REPLACE event for a new multipath route, lag activation can be missed if a stale (struct lag_mp)->mfi pointer exists, which was associated with an older multipath route that had been removed. Normally, when a route is removed, it triggers mlx5_lag_fib_event(), which handles FIB_EVENT_ENTRY_DEL and clears mfi pointer. But, if mlx5_lag_check_prereq() condition isn't met, for example when eswitch is in legacy mode, the fib event is skipped and mfi pointer becomes stale. Fix by resetting mfi pointer to NULL every time mlx5_lag_mp_init() is called. Fixes: 544fe7c2 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by:
Dima Chumak <dchumak@nvidia.com> Reviewed-by:
-
Saeed Mahameed authored
mlx5e_attach_netdev can be called prior to registering the netdevice: Example stack: ipoib_new_child_link -> ipoib_intf_init-> rdma_init_netdev-> mlx5_rdma_setup_rn-> mlx5e_attach_netdev-> mlx5e_num_channels_changed -> mlx5e_set_default_xps_cpumasks -> netif_set_xps_queue -> __netif_set_xps_queue -> kmalloc If any later stage fails at any point after mlx5e_num_channels_changed() returns, XPS allocated maps will never be freed as they are only freed during netdev unregistration, which will never happen for yet to be registered netdevs. Fixes: 3909a12e ("net/mlx5e: Fix configuration of XPS cpumasks and netdev queues in corner cases") Signed-off-by:
Tariq Toukan <tariqt@nvidia.com>
-
Roi Dayan authored
For unreachable route entry the fib dev does not exists. Fixes: 8914add2 ("net/mlx5e: Handle FIB events to update tunnel endpoint device") Reported-by:
Dennis Afanasev <dennis.afanasev@stateless.net> Signed-off-by:
Maor Dickman <maord@nvidia.com> Reviewed-by:
-
Roi Dayan authored
It could be the lag dev is null so stop processing the event. In bond_enslave() the active/backup slave being set before setting the upper dev so first event is without an upper dev. After setting the upper dev with bond_master_upper_dev_link() there is a second event and in that event we have an upper dev. Fixes: 7e51891a ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule") Signed-off-by:
-
Dima Chumak authored
The result of __dev_get_by_index() is not checked for NULL, which then passed to mlx5e_attach_encap() and gets dereferenced. Also, in case of a successful lookup, the net_device reference count is not incremented, which may result in net_device pointer becoming invalid at any time during mlx5e_attach_encap() execution. Fix by using dev_get_by_index(), which does proper reference counting on the net_device pointer. Also, handle nullptr return value when mirred device is not found. It's safe to call dev_put() on the mirred net_device pointer, right after mlx5e_attach_encap() call, because it's not being saved/copied down the call chain. Fixes: 3c37745e ("net/mlx5e: Properly deal with encap flows add/del under neigh update") Addresses-Coverity: ("Dereference null return value") Signed-off-by:
-
Parav Pandit authored
When a SF is inactivated and when it is in a TEARDOWN_REQUEST state, driver still returns its state as active. This is incorrect. Fix it by treating TEARDOWN_REQEUST as inactive state. When a SF is still attached to the driver, on user request to reactivate EINVAL error is returned. Inform user about it with better code EBUSY and informative error message. Fixes: 6a327321 ("net/mlx5: SF, Port function state change support") Signed-off-by:
Parav Pandit <parav@nvidia.com> Reviewed-by:
Vu Pham <vuhuong@nvidia.com> Signed-off-by:
-
Roi Dayan authored
Fix print to print correct error code and not using IS_ERR() which will just result in always printing 1. Also return real err instead of always -EOPNOTSUPP. Fixes: 10caabda ("net/mlx5e: Use termination table for VLAN push actions") Signed-off-by:
-
Jianbo Liu authored
For remote mirroring, after the tunnel packets are received, they are decapsulated and sent to representor, then re-encapsulated and sent out over another tunnel. So reformat action is set only when the destination is required to do encapsulation. Fixes: 249ccc3c ("net/mlx5e: Add support for offloading traffic from uplink to uplink") Signed-off-by:
Jianbo Liu <jianbol@nvidia.com> Reviewed-by:
-
Dima Chumak authored
The result of dev_get_by_index_rcu() is not checked for NULL and then gets dereferenced immediately. Also, the RCU lock must be held by the caller of dev_get_by_index_rcu(), which isn't satisfied by the call stack. Fix by handling nullptr return value when iflink device is not found. Add RCU locking around dev_get_by_index_rcu() to avoid possible adverse effects while iterating over the net_device's hlist. It is safe not to increment reference count of the net_device pointer in case of a successful lookup, because it's already handled by VLAN code during VLAN device registration (see register_vlan_dev and netdev_upper_dev_link). Fixes: 278748a9 ("net/mlx5e: Offload TC e-switch rules with egress VLAN device") Addresses-Coverity: ("Dereference null return value") Signed-off-by:
-
