1. 15 Oct, 2014 7 commits
    • Shmulik Ladkani's avatar
      sit: Fix ipip6_tunnel_lookup device matching criteria · e72790ed
      Shmulik Ladkani authored
      [ Upstream commit bc8fc7b8 ]
      
      As of 4fddbf5d ("sit: strictly restrict incoming traffic to tunnel link device"),
      when looking up a tunnel, tunnel's underlying interface (t->parms.link)
      is verified to match incoming traffic's ingress device.
      
      However the comparison was incorrectly based on skb->dev->iflink.
      
      Instead, dev->ifindex should be used, which correctly represents the
      interface from which the IP stack hands the ipip6 packets.
      
      This allows setting up sit tunnels bound to vlan interfaces (otherwise
      incoming ipip6 traffic on the vlan interface was dropped due to
      ipip6_tunnel_lookup match failure).
      Signed-off-by: default avatarShmulik Ladkani <shmulik.ladkani@gmail.com>
      Acked-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e72790ed
    • Andrey Vagin's avatar
      tcp: don't use timestamp from repaired skb-s to calculate RTT (v2) · 48518112
      Andrey Vagin authored
      [ Upstream commit 9d186cac ]
      
      We don't know right timestamp for repaired skb-s. Wrong RTT estimations
      isn't good, because some congestion modules heavily depends on it.
      
      This patch adds the TCPCB_REPAIRED flag, which is included in
      TCPCB_RETRANS.
      
      Thanks to Eric for the advice how to fix this issue.
      
      This patch fixes the warning:
      [  879.562947] WARNING: CPU: 0 PID: 2825 at net/ipv4/tcp_input.c:3078 tcp_ack+0x11f5/0x1380()
      [  879.567253] CPU: 0 PID: 2825 Comm: socket-tcpbuf-l Not tainted 3.16.0-next-20140811 #1
      [  879.567829] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
      [  879.568177]  0000000000000000 00000000c532680c ffff880039643d00 ffffffff817aa2d2
      [  879.568776]  0000000000000000 ffff880039643d38 ffffffff8109afbd ffff880039d6ba80
      [  879.569386]  ffff88003a449800 000000002983d6bd 0000000000000000 000000002983d6bc
      [  879.569982] Call Trace:
      [  879.570264]  [<ffffffff817aa2d2>] dump_stack+0x4d/0x66
      [  879.570599]  [<ffffffff8109afbd>] warn_slowpath_common+0x7d/0xa0
      [  879.570935]  [<ffffffff8109b0ea>] warn_slowpath_null+0x1a/0x20
      [  879.571292]  [<ffffffff816d0a05>] tcp_ack+0x11f5/0x1380
      [  879.571614]  [<ffffffff816d10bd>] tcp_rcv_established+0x1ed/0x710
      [  879.571958]  [<ffffffff816dc9da>] tcp_v4_do_rcv+0x10a/0x370
      [  879.572315]  [<ffffffff81657459>] release_sock+0x89/0x1d0
      [  879.572642]  [<ffffffff816c81a0>] do_tcp_setsockopt.isra.36+0x120/0x860
      [  879.573000]  [<ffffffff8110a52e>] ? rcu_read_lock_held+0x6e/0x80
      [  879.573352]  [<ffffffff816c8912>] tcp_setsockopt+0x32/0x40
      [  879.573678]  [<ffffffff81654ac4>] sock_common_setsockopt+0x14/0x20
      [  879.574031]  [<ffffffff816537b0>] SyS_setsockopt+0x80/0xf0
      [  879.574393]  [<ffffffff817b40a9>] system_call_fastpath+0x16/0x1b
      [  879.574730] ---[ end trace a17cbc38eb8c5c00 ]---
      
      v2: moving setting of skb->when for repaired skb-s in tcp_write_xmit,
          where it's set for other skb-s.
      
      Fixes: 431a9124 ("tcp: timestamp SYN+DATA messages")
      Fixes: 740b0f18 ("tcp: switch rtt estimations to usec resolution")
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: Pavel Emelyanov <xemul@parallels.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Signed-off-by: default avatarAndrey Vagin <avagin@openvz.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      48518112
    • David S. Miller's avatar
      Revert "macvlan: simplify the structure port" · de25adff
      David S. Miller authored
      [ Upstream commit 5e3c516b ]
      
      This reverts commit a188a54d.
      
      It causes crashes
      
      ====================
      [   80.643286] BUG: unable to handle kernel NULL pointer dereference at 0000000000000878
      [   80.670103] IP: [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0
      [   80.691289] PGD 22c102067 PUD 235bf0067 PMD 0
      [   80.706611] Oops: 0002 [#1] SMP
      [   80.717836] Modules linked in: macvlan nfsd lockd nfs_acl exportfs auth_rpcgss sunrpc oid_registry ioatdma ixgbe(-) mdio igb dca
      [   80.757935] CPU: 37 PID: 6724 Comm: rmmod Not tainted 3.16.0-net-next-08-12-2014-FCoE+ #1
      [   80.785688] Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.03.0003.041920141333 04/19/2014
      [   80.820310] task: ffff880235a9eae0 ti: ffff88022e844000 task.ti: ffff88022e844000
      [   80.845770] RIP: 0010:[<ffffffff810832e4>]  [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0
      [   80.875326] RSP: 0018:ffff88022e847b28  EFLAGS: 00010046
      [   80.893251] RAX: 0000000000037a6a RBX: 0000000000000878 RCX: 0000000000000000
      [   80.917187] RDX: ffff880235a9eae0 RSI: 0000000000000001 RDI: ffffffff810832db
      [   80.941125] RBP: ffff88022e847b58 R08: 0000000000000000 R09: 0000000000000000
      [   80.965056] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022e847b70
      [   80.988994] R13: 0000000000000000 R14: ffff88022e847be8 R15: ffffffff81ebe440
      [   81.012929] FS:  00007fab90b07700(0000) GS:ffff88043f7a0000(0000) knlGS:0000000000000000
      [   81.040400] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [   81.059757] CR2: 0000000000000878 CR3: 0000000235a42000 CR4: 00000000001407e0
      [   81.083689] Stack:
      [   81.090739]  ffff880235a9eae0 0000000000000878 ffff88022e847b70 0000000000000000
      [   81.116253]  ffff88022e847be8 ffffffff81ebe440 ffff88022e847b98 ffffffff810847f1
      [   81.141766]  ffff88022e847b78 0000000000000286 ffff880234200000 0000000000000000
      [   81.167282] Call Trace:
      [   81.175768]  [<ffffffff810847f1>] __cancel_work_timer+0x31/0x170
      [   81.195985]  [<ffffffff8108494b>] cancel_work_sync+0xb/0x10
      [   81.214769]  [<ffffffffa015ae68>] macvlan_port_destroy+0x28/0x60 [macvlan]
      [   81.237844]  [<ffffffffa015b930>] macvlan_uninit+0x40/0x50 [macvlan]
      [   81.259209]  [<ffffffff816bf6e2>] rollback_registered_many+0x1a2/0x2c0
      [   81.281140]  [<ffffffff816bf81a>] unregister_netdevice_many+0x1a/0xb0
      [   81.302786]  [<ffffffffa015a4ff>] macvlan_device_event+0x1ef/0x240 [macvlan]
      [   81.326439]  [<ffffffff8108a13d>] notifier_call_chain+0x4d/0x70
      [   81.346366]  [<ffffffff8108a201>] raw_notifier_call_chain+0x11/0x20
      [   81.367439]  [<ffffffff816bf25b>] call_netdevice_notifiers_info+0x3b/0x70
      [   81.390228]  [<ffffffff816bf2a1>] call_netdevice_notifiers+0x11/0x20
      [   81.411587]  [<ffffffff816bf6bd>] rollback_registered_many+0x17d/0x2c0
      [   81.433518]  [<ffffffff816bf925>] unregister_netdevice_queue+0x75/0x110
      [   81.455735]  [<ffffffff816bfb2b>] unregister_netdev+0x1b/0x30
      [   81.475094]  [<ffffffffa0039b50>] ixgbe_remove+0x170/0x1d0 [ixgbe]
      [   81.495886]  [<ffffffff813512a2>] pci_device_remove+0x32/0x60
      [   81.515246]  [<ffffffff814c75c4>] __device_release_driver+0x64/0xd0
      [   81.536321]  [<ffffffff814c76f8>] driver_detach+0xc8/0xd0
      [   81.554530]  [<ffffffff814c656e>] bus_remove_driver+0x4e/0xa0
      [   81.573888]  [<ffffffff814c828b>] driver_unregister+0x2b/0x60
      [   81.593246]  [<ffffffff8135143e>] pci_unregister_driver+0x1e/0xa0
      [   81.613749]  [<ffffffffa005db18>] ixgbe_exit_module+0x1c/0x2e [ixgbe]
      [   81.635401]  [<ffffffff810e738b>] SyS_delete_module+0x15b/0x1e0
      [   81.655334]  [<ffffffff8187a395>] ? sysret_check+0x22/0x5d
      [   81.673833]  [<ffffffff810abd2d>] ? trace_hardirqs_on_caller+0x11d/0x1e0
      [   81.696339]  [<ffffffff8132bfde>] ? trace_hardirqs_on_thunk+0x3a/0x3f
      [   81.717985]  [<ffffffff8187a369>] system_call_fastpath+0x16/0x1b
      [   81.738199] Code: 00 48 83 3d 6e bb da 00 00 48 89 c2 0f 84 67 01 00 00 fa 66 0f 1f 44 00 00 49 89 14 24 e8 b5 4b 02 00 45 84 ed 0f 85 ac 00 00 00 <f0> 0f ba 2b 00 72 1d 31 c0 48 8b 5d d8 4c 8b 65 e0 4c 8b 6d e8
      [   81.807026] RIP  [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0
      [   81.828468]  RSP <ffff88022e847b28>
      [   81.840384] CR2: 0000000000000878
      [   81.851731] ---[ end trace 9f6c7232e3464e11 ]---
      ====================
      
      This bug could be triggered by these steps:
      
      modprobe ixgbe ; modprobe macvlan
      ip link add link p96p1 address 00:1B:21:6E:06:00 macvlan0 type macvlan
      ip link add link p96p1 address 00:1B:21:6E:06:01 macvlan1 type macvlan
      ip link add link p96p1 address 00:1B:21:6E:06:02 macvlan2 type macvlan
      ip link add link p96p1 address 00:1B:21:6E:06:03 macvlan3 type macvlan
      rmmod ixgbe
      Reported-by: default avatar"Keller, Jacob E" <jacob.e.keller@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      de25adff
    • Stanislaw Gruszka's avatar
      myri10ge: check for DMA mapping errors · a378b942
      Stanislaw Gruszka authored
      [ Upstream commit 10545937 ]
      
      On IOMMU systems DMA mapping can fail, we need to check for
      that possibility.
      Signed-off-by: default avatarStanislaw Gruszka <sgruszka@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a378b942
    • Vlad Yasevich's avatar
      net: Always untag vlan-tagged traffic on input. · 84beb1a9
      Vlad Yasevich authored
      [ Upstream commit 0d5501c1 ]
      
      Currently the functionality to untag traffic on input resides
      as part of the vlan module and is build only when VLAN support
      is enabled in the kernel.  When VLAN is disabled, the function
      vlan_untag() turns into a stub and doesn't really untag the
      packets.  This seems to create an interesting interaction
      between VMs supporting checksum offloading and some network drivers.
      
      There are some drivers that do not allow the user to change
      tx-vlan-offload feature of the driver.  These drivers also seem
      to assume that any VLAN-tagged traffic they transmit will
      have the vlan information in the vlan_tci and not in the vlan
      header already in the skb.  When transmitting skbs that already
      have tagged data with partial checksum set, the checksum doesn't
      appear to be updated correctly by the card thus resulting in a
      failure to establish TCP connections.
      
      The following is a packet trace taken on the receiver where a
      sender is a VM with a VLAN configued.  The host VM is running on
      doest not have VLAN support and the outging interface on the
      host is tg3:
      10:12:43.503055 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q
      (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27243,
      offset 0, flags [DF], proto TCP (6), length 60)
          10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect
      -> 0x48d9), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val
      4294837885 ecr 0,nop,wscale 7], length 0
      10:12:44.505556 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q
      (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27244,
      offset 0, flags [DF], proto TCP (6), length 60)
          10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect
      -> 0x44ee), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val
      4294838888 ecr 0,nop,wscale 7], length 0
      
      This connection finally times out.
      
      I've only access to the TG3 hardware in this configuration thus have
      only tested this with TG3 driver.  There are a lot of other drivers
      that do not permit user changes to vlan acceleration features, and
      I don't know if they all suffere from a similar issue.
      
      The patch attempt to fix this another way.  It moves the vlan header
      stipping code out of the vlan module and always builds it into the
      kernel network core.  This way, even if vlan is not supported on
      a virtualizatoin host, the virtual machines running on top of such
      host will still work with VLANs enabled.
      
      CC: Patrick McHardy <kaber@trash.net>
      CC: Nithin Nayak Sujir <nsujir@broadcom.com>
      CC: Michael Chan <mchan@broadcom.com>
      CC: Jiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarVladislav Yasevich <vyasevic@redhat.com>
      Acked-by: default avatarJiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      84beb1a9
    • Jiri Benc's avatar
      rtnetlink: fix VF info size · 53f8c7d2
      Jiri Benc authored
      [ Upstream commit 945a3676 ]
      
      Commit 1d8faf48 ("net/core: Add VF link state control") added new
      attribute to IFLA_VF_INFO group in rtnl_fill_ifinfo but did not adjust size
      of the allocated memory in if_nlmsg_size/rtnl_vfinfo_size. As the result, we
      may trigger warnings in rtnl_getlink and similar functions when many VF
      links are enabled, as the information does not fit into the allocated skb.
      
      Fixes: 1d8faf48 ("net/core: Add VF link state control")
      Reported-by: default avatarYulong Pei <ypei@redhat.com>
      Signed-off-by: default avatarJiri Benc <jbenc@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      53f8c7d2
    • Daniel Borkmann's avatar
      netlink: reset network header before passing to taps · 47a0ff6c
      Daniel Borkmann authored
      [ Upstream commit 4e48ed88 ]
      
      netlink doesn't set any network header offset thus when the skb is
      being passed to tap devices via dev_queue_xmit_nit(), it emits klog
      false positives due to it being unset like:
      
        ...
        [  124.990397] protocol 0000 is buggy, dev nlmon0
        [  124.990411] protocol 0000 is buggy, dev nlmon0
        ...
      
      So just reset the network header before passing to the device; for
      packet sockets that just means nothing will change - mac and net
      offset hold the same value just as before.
      Reported-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      Signed-off-by: default avatarDaniel Borkmann <dborkman@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      47a0ff6c
  2. 09 Oct, 2014 27 commits
  3. 05 Oct, 2014 6 commits