Skip to content

L
linux
Switch branch/tag
  1. 02 Jun, 2017 16 commits
    • Hari Bathini's avatar
      powerpc/fadump: Update comment about offset where fadump is reserved · e7467dc6
      Hari Bathini authored 
      With commit f6e6bedb ("powerpc/fadump: Reserve memory at an offset
closer to bottom of RAM"), memory for fadump is no longer reserved at
the top of RAM. But there are still a few places which say so. Change
them appropriately.
Signed-off-by: default avatarHari Bathini <hbathini@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      e7467dc6
    • Hari Bathini's avatar
      powerpc/fadump: Add a warning when 'fadump_reserve_mem=' is used · 81d9eca5
      Hari Bathini authored 
      With commit 11550dc0 ("powerpc/fadump: reuse crashkernel parameter
for fadump memory reservation"), 'fadump_reserve_mem=' parameter is
deprecated in favor of 'crashkernel=' parameter. Add a warning if
'fadump_reserve_mem=' is still used.

Fixes: 11550dc0 ("powerpc/fadump: reuse crashkernel parameter for fadump memory reservation")
Suggested-by: default avatarPrarit Bhargava <prarit@redhat.com>
Signed-off-by: default avatarHari Bathini <hbathini@linux.vnet.ibm.com>
[mpe: Unsplit long printk strings]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      81d9eca5
    • Michal Suchanek's avatar
      powerpc/fadump: Return error when fadump registration fails · 98b8cd7f
      Michal Suchanek authored 
       - log an error message when registration fails and no error code listed
   in the switch is returned
 - translate the hv error code to posix error code and return it from
   fw_register
 - return the posix error code from fw_register to the process writing
   to sysfs
 - return EEXIST on re-registration
 - return success on deregistration when fadump is not registered
 - return ENODEV when no memory is reserved for fadump
Signed-off-by: default avatarMichal Suchanek <msuchanek@suse.de>
Tested-by: default avatarHari Bathini <hbathini@linux.vnet.ibm.com>
[mpe: Use pr_err() to shrink the error print]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      98b8cd7f
    • Christophe Leroy's avatar
      powerpc: Remove __ilog2()s and use generic ones · f782ddf2
      Christophe Leroy authored 
      With the __ilog2() function as defined in
arch/powerpc/include/asm/bitops.h, GCC will not optimise the code
in case of constant parameter.

The generic ilog2() function in include/linux/log2.h is written
to handle the case of the constant parameter.

This patch discards the three __ilog2() functions and
defines __ilog2() as ilog2()

For non constant calls, the generated code is doing the same:
int test__ilog2(unsigned long x)
{
	return __ilog2(x);
}

int test__ilog2_u32(u32 n)
{
	return __ilog2_u32(n);
}

int test__ilog2_u64(u64 n)
{
	return __ilog2_u64(n);
}

On PPC32 before the patch:
00000000 <test__ilog2>:
   0:	7c 63 00 34 	cntlzw  r3,r3
   4:	20 63 00 1f 	subfic  r3,r3,31
   8:	4e 80 00 20 	blr

0000000c <test__ilog2_u32>:
   c:	7c 63 00 34 	cntlzw  r3,r3
  10:	20 63 00 1f 	subfic  r3,r3,31
  14:	4e 80 00 20 	blr

On PPC32 after the patch:
00000000 <test__ilog2>:
   0:	7c 63 00 34 	cntlzw  r3,r3
   4:	20 63 00 1f 	subfic  r3,r3,31
   8:	4e 80 00 20 	blr

0000000c <test__ilog2_u32>:
   c:	7c 63 00 34 	cntlzw  r3,r3
  10:	20 63 00 1f 	subfic  r3,r3,31
  14:	4e 80 00 20 	blr

On PPC64 before the patch:
0000000000000000 <.test__ilog2>:
   0:	7c 63 00 74 	cntlzd  r3,r3
   4:	20 63 00 3f 	subfic  r3,r3,63
   8:	7c 63 07 b4 	extsw   r3,r3
   c:	4e 80 00 20 	blr

0000000000000010 <.test__ilog2_u32>:
  10:	7c 63 00 34 	cntlzw  r3,r3
  14:	20 63 00 1f 	subfic  r3,r3,31
  18:	7c 63 07 b4 	extsw   r3,r3
  1c:	4e 80 00 20 	blr

0000000000000020 <.test__ilog2_u64>:
  20:	7c 63 00 74 	cntlzd  r3,r3
  24:	20 63 00 3f 	subfic  r3,r3,63
  28:	7c 63 07 b4 	extsw   r3,r3
  2c:	4e 80 00 20 	blr

On PPC64 after the patch:
0000000000000000 <.test__ilog2>:
   0:	7c 63 00 74 	cntlzd  r3,r3
   4:	20 63 00 3f 	subfic  r3,r3,63
   8:	7c 63 07 b4 	extsw   r3,r3
   c:	4e 80 00 20 	blr

0000000000000010 <.test__ilog2_u32>:
  10:	7c 63 00 34 	cntlzw  r3,r3
  14:	20 63 00 1f 	subfic  r3,r3,31
  18:	7c 63 07 b4 	extsw   r3,r3
  1c:	4e 80 00 20 	blr

0000000000000020 <.test__ilog2_u64>:
  20:	7c 63 00 74 	cntlzd  r3,r3
  24:	20 63 00 3f 	subfic  r3,r3,63
  28:	7c 63 07 b4 	extsw   r3,r3
  2c:	4e 80 00 20 	blr
Signed-off-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      f782ddf2
    • Christophe Leroy's avatar
      powerpc: Replace ffz() by equivalent generic function · 22ef33b3
      Christophe Leroy authored 
      With the ffz() function as defined in arch/powerpc/include/asm/bitops.h
GCC will not optimise the code in case of constant parameter.

This patch replaces ffz() by the generic function.

The generic ffz(x) expects to never be called with ~x == 0
as written in the comment in include/asm-generic/bitops/ffz.h
The only user of ffz() within arch/powerpc/ is
platforms/512x/mpc5121_ads_cpld.c, which checks if x is not 0xff

For non constant calls, the generated code is doing the same:

unsigned long testffz(unsigned long x)
{
	return ffz(x);
}

On PPC32, before the patch:
00000018 <testffz>:
  18:	7c 63 18 f9 	not.    r3,r3
  1c:	40 82 00 0c 	bne     28 <testffz+0x10>
  20:	38 60 00 20 	li      r3,32
  24:	4e 80 00 20 	blr
  28:	7d 23 00 d0 	neg     r9,r3
  2c:	7d 23 18 38 	and     r3,r9,r3
  30:	7c 63 00 34 	cntlzw  r3,r3
  34:	20 63 00 1f 	subfic  r3,r3,31
  38:	4e 80 00 20 	blr

On PPC32, after the patch:
00000018 <testffz>:
  18:	39 23 00 01 	addi    r9,r3,1
  1c:	7d 23 18 78 	andc    r3,r9,r3
  20:	7c 63 00 34 	cntlzw  r3,r3
  24:	20 63 00 1f 	subfic  r3,r3,31
  28:	4e 80 00 20 	blr

On PPC64, before the patch:
0000000000000030 <.testffz>:
  30:	7c 60 18 f9 	not.    r0,r3
  34:	38 60 00 40 	li      r3,64
  38:	4d 82 00 20 	beqlr
  3c:	7c 60 00 d0 	neg     r3,r0
  40:	7c 63 00 38 	and     r3,r3,r0
  44:	7c 63 00 74 	cntlzd  r3,r3
  48:	20 63 00 3f 	subfic  r3,r3,63
  4c:	7c 63 07 b4 	extsw   r3,r3
  50:	4e 80 00 20 	blr

On PPC64, after the patch:
0000000000000030 <.testffz>:
  30:	38 03 00 01 	addi    r0,r3,1
  34:	7c 03 18 78 	andc    r3,r0,r3
  38:	7c 63 00 74 	cntlzd  r3,r3
  3c:	20 63 00 3f 	subfic  r3,r3,63
  40:	4e 80 00 20 	blr
Signed-off-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      22ef33b3
    • Christophe Leroy's avatar
      powerpc: Use builtin functions for fls()/__fls()/fls64() · 2fcff790
      Christophe Leroy authored 
      With the fls() functions as defined in arch/powerpc/include/asm/bitops.h
GCC will not optimise the code in case of constant parameter.

This patch replaces __fls() by the builtin function, and modifies
fls() and fls64() to use builtins instead of inline assembly

For non constant calls, the generated code is doing the same:

int testfls(unsigned int x)
{
	return fls(x);
}

unsigned long test__fls(unsigned long x)
{
	return __fls(x);
}

int testfls64(__u64 x)
{
	return fls64(x);
}

On PPC32, before the patch:
00000064 <testfls>:
  64:	7c 63 00 34 	cntlzw  r3,r3
  68:	20 63 00 20 	subfic  r3,r3,32
  6c:	4e 80 00 20 	blr

00000070 <test__fls>:
  70:	7c 63 00 34 	cntlzw  r3,r3
  74:	20 63 00 1f 	subfic  r3,r3,31
  78:	4e 80 00 20 	blr

0000007c <testfls64>:
  7c:	2c 03 00 00 	cmpwi   r3,0
  80:	40 82 00 10 	bne     90 <testfls64+0x14>
  84:	7c 83 00 34 	cntlzw  r3,r4
  88:	20 63 00 20 	subfic  r3,r3,32
  8c:	4e 80 00 20 	blr
  90:	7c 63 00 34 	cntlzw  r3,r3
  94:	20 63 00 40 	subfic  r3,r3,64
  98:	4e 80 00 20 	blr

On PPC32, after the patch:
00000054 <testfls>:
  54:	7c 63 00 34 	cntlzw  r3,r3
  58:	20 63 00 20 	subfic  r3,r3,32
  5c:	4e 80 00 20 	blr

00000060 <test__fls>:
  60:	7c 63 00 34 	cntlzw  r3,r3
  64:	20 63 00 1f 	subfic  r3,r3,31
  68:	4e 80 00 20 	blr

0000006c <testfls64>:
  6c:	2c 03 00 00 	cmpwi   r3,0
  70:	41 82 00 10 	beq     80 <testfls64+0x14>
  74:	7c 63 00 34 	cntlzw  r3,r3
  78:	20 63 00 40 	subfic  r3,r3,64
  7c:	4e 80 00 20 	blr
  80:	7c 83 00 34 	cntlzw  r3,r4
  84:	20 63 00 40 	subfic  r3,r3,32
  88:	4e 80 00 20 	blr

On PPC64, before the patch:
00000000000000a0 <.testfls>:
  a0:	7c 63 00 34 	cntlzw  r3,r3
  a4:	20 63 00 20 	subfic  r3,r3,32
  a8:	7c 63 07 b4 	extsw   r3,r3
  ac:	4e 80 00 20 	blr

00000000000000b0 <.test__fls>:
  b0:	7c 63 00 74 	cntlzd  r3,r3
  b4:	20 63 00 3f 	subfic  r3,r3,63
  b8:	7c 63 07 b4 	extsw   r3,r3
  bc:	4e 80 00 20 	blr

00000000000000c0 <.testfls64>:
  c0:	7c 63 00 74 	cntlzd  r3,r3
  c4:	20 63 00 40 	subfic  r3,r3,64
  c8:	7c 63 07 b4 	extsw   r3,r3
  cc:	4e 80 00 20 	blr

On PPC64, after the patch:
0000000000000090 <.testfls>:
  90:	7c 63 00 34 	cntlzw  r3,r3
  94:	20 63 00 20 	subfic  r3,r3,32
  98:	7c 63 07 b4 	extsw   r3,r3
  9c:	4e 80 00 20 	blr

00000000000000a0 <.test__fls>:
  a0:	7c 63 00 74 	cntlzd  r3,r3
  a4:	20 63 00 3f 	subfic  r3,r3,63
  a8:	4e 80 00 20 	blr
  ac:	60 00 00 00 	nop

00000000000000b0 <.testfls64>:
  b0:	7c 63 00 74 	cntlzd  r3,r3
  b4:	20 63 00 40 	subfic  r3,r3,64
  b8:	7c 63 07 b4 	extsw   r3,r3
  bc:	4e 80 00 20 	blr

Those builtins have been in GCC since at least 3.4.6 (see
https://gcc.gnu.org/onlinedocs/gcc-3.4.6/gcc/Other-Builtins.html )
Signed-off-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      2fcff790
    • Christophe Leroy's avatar
      powerpc: Discard ffs()/__ffs() function and use builtin functions instead · f83647d6
      Christophe Leroy authored 
      With the ffs() function as defined in arch/powerpc/include/asm/bitops.h
GCC will not optimise the code in case of constant parameter, as shown
by the small exemple below.

int ffs_test(void)
{
	return 4 << ffs(31);
}

c0012334 <ffs_test>:
c0012334:       39 20 00 01     li      r9,1
c0012338:       38 60 00 04     li      r3,4
c001233c:       7d 29 00 34     cntlzw  r9,r9
c0012340:       21 29 00 20     subfic  r9,r9,32
c0012344:       7c 63 48 30     slw     r3,r3,r9
c0012348:       4e 80 00 20     blr

With this patch, the same function will compile as follows:

c0012334 <ffs_test>:
c0012334:       38 60 00 08     li      r3,8
c0012338:       4e 80 00 20     blr

The same happens with __ffs()

For non constant calls, the generated code is doing the same,
allthought it is slightly different on 64 bits for ffs():

unsigned long test__ffs(unsigned long x)
{
	return __ffs(x);
}

int testffs(int x)
{
	return ffs(x);
}

On PPC32, before the patch:
0000003c <test__ffs>:
  3c:	7d 23 00 d0 	neg     r9,r3
  40:	7d 23 18 38 	and     r3,r9,r3
  44:	7c 63 00 34 	cntlzw  r3,r3
  48:	20 63 00 1f 	subfic  r3,r3,31
  4c:	4e 80 00 20 	blr

00000050 <testffs>:
  50:	7d 23 00 d0 	neg     r9,r3
  54:	7d 23 18 38 	and     r3,r9,r3
  58:	7c 63 00 34 	cntlzw  r3,r3
  5c:	20 63 00 20 	subfic  r3,r3,32
  60:	4e 80 00 20 	blr

On PPC32, after the patch:
0000002c <test__ffs>:
  2c:	7d 23 00 d0 	neg     r9,r3
  30:	7d 23 18 38 	and     r3,r9,r3
  34:	7c 63 00 34 	cntlzw  r3,r3
  38:	20 63 00 1f 	subfic  r3,r3,31
  3c:	4e 80 00 20 	blr

00000040 <testffs>:
  40:	7d 23 00 d0 	neg     r9,r3
  44:	7d 23 18 38 	and     r3,r9,r3
  48:	7c 63 00 34 	cntlzw  r3,r3
  4c:	20 63 00 20 	subfic  r3,r3,32
  50:	4e 80 00 20 	blr

On PPC64, before the patch:
0000000000000060 <.test__ffs>:
  60:	7c 03 00 d0 	neg     r0,r3
  64:	7c 03 18 38 	and     r3,r0,r3
  68:	7c 63 00 74 	cntlzd  r3,r3
  6c:	20 63 00 3f 	subfic  r3,r3,63
  70:	7c 63 07 b4 	extsw   r3,r3
  74:	4e 80 00 20 	blr

0000000000000080 <.testffs>:
  80:	7c 03 00 d0 	neg     r0,r3
  84:	7c 03 18 38 	and     r3,r0,r3
  88:	7c 63 00 74 	cntlzd  r3,r3
  8c:	20 63 00 40 	subfic  r3,r3,64
  90:	7c 63 07 b4 	extsw   r3,r3
  94:	4e 80 00 20 	blr

On PPC64, after the patch:
0000000000000050 <.test__ffs>:
  50:	7c 03 00 d0 	neg     r0,r3
  54:	7c 03 18 38 	and     r3,r0,r3
  58:	7c 63 00 74 	cntlzd  r3,r3
  5c:	20 63 00 3f 	subfic  r3,r3,63
  60:	4e 80 00 20 	blr

0000000000000070 <.testffs>:
  70:	7c 03 00 d0 	neg     r0,r3
  74:	7c 03 18 38 	and     r3,r0,r3
  78:	7c 63 00 34 	cntlzw  r3,r3
  7c:	20 63 00 20 	subfic  r3,r3,32
  80:	7c 63 07 b4 	extsw   r3,r3
  84:	4e 80 00 20 	blr
(ffs() operates on an int so cntlzw is equivalent to cntlzd)

In addition, when reading the generated vmlinux, we can observe
that with the builtin functions, GCC sometimes efficiently spreads
the instructions within the generated functions while the inline
assembly force them to remain grouped together.

__builtin_ffs() is already used in arch/powerpc/include/asm/page_32.h

Those builtins have been in GCC since at least 3.4.6 (see
https://gcc.gnu.org/onlinedocs/gcc-3.4.6/gcc/Other-Builtins.html )
Signed-off-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      f83647d6
    • Christophe Leroy's avatar
      powerpc: Handle simultaneous interrupts at once · 45cb08f4
      Christophe Leroy authored 
      It often happens to have simultaneous interrupts, for instance
when having double Ethernet attachment. With the current
implementation, we suffer the cost of kernel entry/exit for each
interrupt.

This patch introduces a loop in __do_irq() to handle all interrupts
at once before returning.
Signed-off-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      45cb08f4
    • Christophe Leroy's avatar
      powerpc/8xx: fix mpc8xx_get_irq() return on no irq · 3c29b603
      Christophe Leroy authored 
      IRQ 0 is a valid HW interrupt. So get_irq() shall return 0 when
there is no irq, instead of returning irq_linear_revmap(... ,0)

Fixes: f2a0bd37 ("[POWERPC] 8xx: powerpc port of core CPM PIC")
Signed-off-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      3c29b603
    • Christophe Leroy's avatar
      powerpc/40x: Clear MSR_DR in one insn instead of two · 362957c2
      Christophe Leroy authored 
      Signed-off-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      362957c2
    • Christophe Leroy's avatar
      powerpc/mm: The 8xx doesn't call do_page_fault() for breakpoints · 92aa2fe0
      Christophe Leroy authored 
      The 8xx has a dedicated exception for breakpoints, that directly
calls do_break()
Signed-off-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      92aa2fe0
    • Christophe Leroy's avatar
      powerpc/mm: Evaluate user_mode(regs) only once in do_page_fault() · da929f6a
      Christophe Leroy authored 
      Analysis of the assembly code shows that when using user_mode(regs),
at least the 'andi.' is redone all the time, and also
the 'lwz ,132(r31)' most of the time. With the new form, the 'is_user'
is mapped to cr4, then all further use of is_user results in just
things like 'beq cr4,218 <do_page_fault+0x218>'

Without the patch:

  50:	81 1e 00 84 	lwz     r8,132(r30)
  54:	71 09 40 00 	andi.   r9,r8,16384
  58:	40 82 00 0c 	bne     64 <do_page_fault+0x64>

  84:	81 3e 00 84 	lwz     r9,132(r30)
  8c:	71 2a 40 00 	andi.   r10,r9,16384
  90:	41 a2 01 64 	beq     1f4 <do_page_fault+0x1f4>

  d4:	81 3e 00 84 	lwz     r9,132(r30)
  dc:	71 28 40 00 	andi.   r8,r9,16384
  e0:	41 82 02 08 	beq     2e8 <do_page_fault+0x2e8>

 108:	81 3e 00 84 	lwz     r9,132(r30)
 110:	71 28 40 00 	andi.   r8,r9,16384
 118:	41 82 02 28 	beq     340 <do_page_fault+0x340>

 1e4:	81 3e 00 84 	lwz     r9,132(r30)
 1e8:	71 2a 40 00 	andi.   r10,r9,16384
 1ec:	40 82 01 68 	bne     354 <do_page_fault+0x354>

 228:	81 3e 00 84 	lwz     r9,132(r30)
 22c:	71 28 40 00 	andi.   r8,r9,16384
 230:	41 82 ff c4 	beq     1f4 <do_page_fault+0x1f4>

 288:	71 2a 40 00 	andi.   r10,r9,16384
 294:	41 a2 fe 60 	beq     f4 <do_page_fault+0xf4>

 50c:	81 3e 00 84 	lwz     r9,132(r30)
 514:	71 2a 40 00 	andi.   r10,r9,16384
 518:	40 a2 fc e0 	bne     1f8 <do_page_fault+0x1f8>

 534:	81 3e 00 84 	lwz     r9,132(r30)
 53c:	71 2a 40 00 	andi.   r10,r9,16384
 540:	41 82 fc b8 	beq     1f8 <do_page_fault+0x1f8>

This patch creates a local var called 'is_user' which contains the
result of user_mode(regs)

With the patch:

  20:	81 03 00 84 	lwz     r8,132(r3)
  48:	55 09 97 fe 	rlwinm  r9,r8,18,31,31
  58:	2e 09 00 00 	cmpwi   cr4,r9,0
  5c:	40 92 00 0c 	bne     cr4,68 <do_page_fault+0x68>

  88:	41 b2 01 90 	beq     cr4,218 <do_page_fault+0x218>

  d4:	40 92 01 d0 	bne     cr4,2a4 <do_page_fault+0x2a4>

 120:	41 b2 00 f8 	beq     cr4,218 <do_page_fault+0x218>

 138:	41 b2 ff a0 	beq     cr4,d8 <do_page_fault+0xd8>

 1d4:	40 92 00 e0 	bne     cr4,2b4 <do_page_fault+0x2b4>
Signed-off-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      da929f6a
    • Christophe Leroy's avatar
      powerpc/mm: Remove a redundant test in do_page_fault() · 97a011e6
      Christophe Leroy authored 
      The result of (trap == 0x400) is already in is_exec.
Signed-off-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      97a011e6
    • Christophe Leroy's avatar
      powerpc/mm: Only call store_updates_sp() on stores in do_page_fault() · e8de85ca
      Christophe Leroy authored 
      Function store_updates_sp() checks whether the faulting
instruction is a store updating r1. Therefore we can limit its calls
to store exceptions.

This patch is an improvement of commit a7a9dcd8 ("powerpc: Avoid
taking a data miss on every userspace instruction miss")

With the same microbenchmark app, run with 500 as argument, on an
MPC885 we get:

Before this patch: 152000 DTLB misses
After this patch:  147000 DTLB misses
Signed-off-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      e8de85ca
    • Christophe Leroy's avatar
      powerpc/mm: Remove __this_fixmap_does_not_exist() · 9affa9e2
      Christophe Leroy authored 
      This function has not been used since commit 9494a1e8
("powerpc: use generic fixmap.h)
Signed-off-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      9affa9e2
    • Balbir Singh's avatar
      powerpc/mm/ptdump: Dump the first entry of the linear mapping as well · e63739b1
      Balbir Singh authored 
      The check in hpte_find() should be < and not <= for PAGE_OFFSET
Signed-off-by: default avatarBalbir Singh <bsingharora@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      e63739b1
  3. 30 May, 2017 24 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7