- 21 Nov, 2022 3 commits
-
-
Umesh Nerlige Ramappa authored
PMU reads the GT timestamp as a 2x32 mmio read and since upper and lower 32 bit registers are read in a loop, there is a latency involved between getting the GT timestamp and the CPU timestamp. As part of the resolution, refactor intel_uncore_read64_2x32 to acquire forcewake and uncore lock prior to reading upper and lower regs. Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221110171913.670286-2-umesh.nerlige.ramappa@intel.com
-
Vinay Belgaumkar authored
By defaut idle messaging is disabled for GSC CS so to unblock RC6 entry on media tile idle messaging need to be enabled. v2: - Fix review comments (Vinay) - Set GSC idle hysteresis as per spec (Badal) v3: - Fix review comments (Rodrigo) Bspec: 71496 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by:
Badal Nilawar <badal.nilawar@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Tvrtko Ursulin authored
In 36537275 ("drm/i915: Simplify internal helper function signature") I broke the old platforms by not noticing engine workaround init does not initialize the list on old platforms. Fix it by always initializing which already does the right thing by mostly not doing anything if there aren't any workarounds on the list. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118115249.2683946-1-tvrtko.ursulin@linux.intel.com
-
- 18 Nov, 2022 1 commit
-
-
Matt Roper authored
The GT MCR code currently relies on uncore->lock to avoid race conditions on the steering control register during MCR operations. The *_fw() versions of MCR operations expect the caller to already hold uncore->lock, while the non-fw variants manage the lock internally. However the sole callsite of intel_gt_mcr_wait_for_reg_fw() does not currently obtain the forcewake lock, allowing a potential race condition (and triggering an assertion on lockdep builds). Furthermore, since 'wait for register value' requests may not return immediately, it is undesirable to hold a fundamental lock like uncore->lock for the entire wait and block all other MMIO for the duration; rather the lock is only needed around the MCR read operations and can be released during the delays. Convert intel_gt_mcr_wait_for_reg_fw() to a non-fw variant that will manage uncore->lock internally. This does have the side effect of causing an unnecessary lookup in the forcewake table on each read operation, but since the caller is still holding the relevant forcewake domain, this will ultimately just incremenent the reference count and won't actually cause any additional MMIO traffic. In the future we plan to switch to a dedicated MCR lock to protect the steering critical section rather than using the overloaded and high-traffic uncore->lock; on MTL and beyond the new lock can be implemented on top of the hardware-provided synchonization mechanism for steering. Fixes: 3068bec8 ("drm/i915/gt: Add intel_gt_mcr_wait_for_reg_fw()") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221117173358.1980230-1-matthew.d.roper@intel.com
-
- 17 Nov, 2022 5 commits
-
-
Badal Nilawar authored
Add support for C6 residency and C state type for MTL SAMedia. Also add mtl_drpc. v2: Fixed review comments (Ashutosh) v3: Sort registers and fix whitespace errors in intel_gt_regs.h (Matt R) Remove MTL_CC_SHIFT (Ashutosh) Adapt to RC6 residency register code refactor (Jani N) v4: Move MTL branch to top in drpc_show v5: Use FORCEWAKE_MT identical to gen6_drpc (Ashutosh) v6: Add MISSING_CASE for gt_core_status switch statement (Rodrigo) Change state name for MTL_CC0 to C0 (from "on") (Rodrigo) v7: Change state name for MTL_CC0 to RC0 (Rodrigo) Signed-off-by: -
Ashutosh Dixit authored
Previously RC6 residency functions directly accepted RC6 residency register MMIO offsets (there are four RC6 residency registers). This worked but required an assumption on the residency register layout so was not future proof. Therefore change RC6 residency functions to accept RC6 residency types instead of register MMIO offsets. The knowledge of register offsets as well as ID to offset mapping is now maintained solely in intel_rc6 and can be tailored for different platforms and different register layouts as need arises. v2: Address review comments by Jani N - Change residency functions to accept RC6 residency types instead of register ID's - s/intel_rc6_print_rc5_res/intel_rc6_print_residency/ - Remove "const enum" in function arguments - Naming: intel_rc6_* for enum - Use INTEL_RC6_RES_MAX and other minor changes v3: Don't include intel_rc6_types.h in intel_rc6.h (Jani) Suggested-by:Jani Nikula <jani.nikula@linux.intel.com> Reported-by:
-
Badal Nilawar authored
Update CAGF functions for MTL to get actual resolved frequency of 3D and SAMedia. v2: Update MTL_MIRROR_TARGET_WP1 position/formatting (MattR) Move MTL branches in cagf functions to top (MattR) Fix commit message (Andi) v3: Added comment about registers not needing forcewake for Gen12+ and returning 0 freq in RC6 v4: Use REG_FIELD_GET and uncore (Rodrigo) Bspec: 66300 Signed-off-by: -
Don Hiatt authored
On GEN12+ use GEN12_RPSTAT register to get actual resolved GT freq. GEN12_RPSTAT does not require a forcewake and will return 0 freq if GT is in RC6. v2: - Fixed review comments(Ashutosh) - Added function intel_rps_read_rpstat_fw to read RPSTAT without forcewake, required especially for GEN6_RPSTAT1 (Ashutosh, Tvrtko) v3: - Updated commit title and message for more clarity (Ashutosh) - Replaced intel_rps_read_rpstat with direct read to GEN12_RPSTAT1 in read_cagf (Ashutosh) v4: Remove GEN12_CAGF_SHIFT and use REG_FIELD_GET (Rodrigo) Cc: Don Hiatt <donhiatt@gmail.com> Cc: Andi Shyti <andi.shyti@intel.com> Signed-off-by:Don Hiatt <don.hiatt@intel.com> Signed-off-by:
Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by:
-
Ashutosh Dixit authored
Instead of masks/shifts settle on REG_FIELD_GET as the standard way to extract reg fields. This allows future patches touching this code to also consistently use REG_FIELD_GET and friends. Suggested-by:
-
- 16 Nov, 2022 7 commits
-
-
Daniele Ceraolo Spurio authored
For the GSC engine we only want to capture the instance regs. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by:
Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221111001832.4144910-1-daniele.ceraolospurio@intel.com
-
Alan Previn authored
Previously, we only used PXP FW interface version-42 structures for PXP arbitration session on ADL/TGL products and version-43 for HuC authentication on DG2. That worked fine despite not differentiating such versioning of the PXP firmware interaction structures. This was okay back then because the only commands used via version 42 was not used via version 43 and vice versa. With MTL, we'll need both these versions side by side for the same commands (PXP-session) with the older platform feature support. That said, let's create separate files to define the structures and definitions for both version-42 and 43 of PXP FW interfaces. Signed-off-by:
-
Matthew Auld authored
In i915_gem_madvise_ioctl() we immediately purge the object is not currently used, like when the mm.pages are NULL. With shmem the pages might still be hanging around or are perhaps swapped out. Similarly with ttm we might still have the pages hanging around on the ttm resource, like with lmem or shmem, but here we need to be extra careful since async unbinds are possible as well as in-progress kernel moves. In i915_ttm_purge() we expect the pipeline-gutting to nuke the ttm resource for us, however if it's busy the memory is only moved to a ghost object, which then leads to broken behaviour when for example clearing the i915_tt->filp, since the actual ttm_tt is still alive and populated, even though it's been moved to the ghost object. When we later destroy the ghost object we hit the following, since the filp is now NULL: [ +0.006982] #PF: supervisor read access in kernel mode [ +0.005149] #PF: error_code(0x0000) - not-present page [ +0.005147] PGD 11631d067 P4D 11631d067 PUD 115972067 PMD 0 [ +0.005676] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.012962] Workqueue: events ttm_device_delayed_workqueue [ttm] [ +0.006022] RIP: 0010:i915_ttm_tt_unpopulate+0x3a/0x70 [i915] [ +0.005879] Code: 89 fb 48 85 f6 74 11 8b 55 4c 48 8b 7d 30 45 31 c0 31 c9 e8 18 6a e5 e0 80 7d 60 00 74 20 48 8b 45 68 8b 55 08 4c 89 e7 5b 5d <48> 8b 40 20 83 e2 01 41 5c 89 d1 48 8b 70 30 e9 42 b2 ff ff 4c 89 [ +0.018782] RSP: 0000:ffffc9000bf6fd70 EFLAGS: 00010202 [ +0.005244] RAX: 0000000000000000 RBX: ffff8883e12ae380 RCX: 0000000000000000 [ +0.007150] RDX: 000000008000000e RSI: ffffffff823559b4 RDI: ffff8883e12ae3c0 [ +0.007142] RBP: ffff888103b65d48 R08: 0000000000000001 R09: 0000000000000001 [ +0.007144] R10: 0000000000000001 R11: ffff88829c2c8040 R12: ffff8883e12ae3c0 [ +0.007148] R13: 0000000000000001 R14: ffff888115184140 R15: ffff888115184248 [ +0.007154] FS: 0000000000000000(0000) GS:ffff88844db00000(0000) knlGS:0000000000000000 [ +0.008108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.005763] CR2: 0000000000000020 CR3: 000000013fdb4004 CR4: 00000000003706e0 [ +0.007152] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.007145] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.007154] Call Trace: [ +0.002459] <TASK> [ +0.002126] ttm_tt_unpopulate.part.0+0x17/0x70 [ttm] [ +0.005068] ttm_bo_tt_destroy+0x1c/0x50 [ttm] [ +0.004464] ttm_bo_cleanup_memtype_use+0x25/0x40 [ttm] [ +0.005244] ttm_bo_cleanup_refs+0x90/0x2c0 [ttm] [ +0.004721] ttm_bo_delayed_delete+0x235/0x250 [ttm] [ +0.004981] ttm_device_delayed_workqueue+0x13/0x40 [ttm] [ +0.005422] process_one_work+0x248/0x560 [ +0.004028] worker_thread+0x4b/0x390 [ +0.003682] ? process_one_work+0x560/0x560 [ +0.004199] kthread+0xeb/0x120 [ +0.003163] ? kthread_complete_and_exit+0x20/0x20 [ +0.004815] ret_from_fork+0x1f/0x30 v2: - Just use ttm_bo_wait() directly (Niranjana) - Add testcase reference Testcase: igt@gem_madvise@dontneed-evict-race Fixes: 213d5092 ("drm/i915/ttm: Introduce a TTM i915 gem object backend") Reported-by:
Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: <stable@vger.kernel.org> # v5.15+ Reviewed-by:
Nirmoy Das <Nirmoy.Das@intel.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221115104620.120432-1-matthew.auld@intel.com
-
Nirmoy Das authored
vm_fault_ttm() should not expect ttm ghost obj so remove that check. Suggested-by:
-
Andrzej Hajda authored
All calls to i915_vma_move_to_active are surrounded by vma lock and/or there are multiple local helpers for it in particular tests. Let's replace it by common helper. The patch should not introduce functional changes. Signed-off-by:
-
Andrzej Hajda authored
Since almost all calls to i915_vma_move_to_active are prepended with i915_request_await_object, let's call the latter from _i915_vma_move_to_active by default and add flag allowing bypassing it. Adjust all callers accordingly. The patch should not introduce functional changes. Signed-off-by:
-
Lucas De Marchi authored
There were several updates in the driver on how the workarounds are handled since its documentation was written. Update the documentation to reflect the current reality. v2: - Remove footnote that was wrongly referenced, adding back the reference in the correct paragraph. - Remove "Display workarounds" and just mention "display IP" under "Other" category since all of them are peppered around the driver. Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
- 15 Nov, 2022 2 commits
-
-
Tvrtko Ursulin authored
Add a missing colon which I accidentally removed in the recent logging changes. Signed-off-by:
-
Lucas De Marchi authored
That section should still be inside "DRM client usage stats" rather than as a sibling. Signed-off-by:
-
- 14 Nov, 2022 9 commits
-
-
Daniele Ceraolo Spurio authored
The render and media GuCs share the same interrupt enable register, so we can no longer disable interrupts when we disable communication for one of the GuCs as this would impact the other GuC. Instead, we keep the interrupts always enabled in HW and use a variable in the GuC structure to determine if we want to service the received interrupts or not. v2: use MTL_ prefix for reg definition (Matt) Signed-off-by:
-
Daniele Ceraolo Spurio authored
The media GT shares the G-unit with the root GT, so a second set of communication registers is required for the media GuC. Signed-off-by:
-
Aravind Iddamsetty authored
With MTL standalone media architecture the wopcm layout has changed, with separate partitioning in WOPCM for the root GT GuC and the media GT GuC. The size of WOPCM is 4MB with the lower 2MB reserved for the media GT and the upper 2MB for the root GT. Given that MTL has GuC deprivilege, the WOPCM registers are pre-locked by the bios. Therefore, we can skip all the math for the partitioning and just limit ourselves to sanity-checking the values. v2: fix makefile file ordering (Jani) v3: drop XELPM_SAMEDIA_WOPCM_SIZE, check huc instead of VDBOX (John) v4: further clarify commit message, remove blank line (John) Signed-off-by:
Aravind Iddamsetty <aravind.iddamsetty@intel.com> Signed-off-by:
-
Stuart Summers authored
MTL supports GuC deprivilege. Add the feature flag to this platform. Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by:
-
Daniele Ceraolo Spurio authored
Our current FW loading process is the same for all FWs: - Pin FW to GGTT at the start of the ggtt->uc_fw node - Load the FW - Unpin This worked because we didn't have a case where 2 FWs would be loaded on the same GGTT at the same time. On MTL, however, this can happen if both GTs are reset at the same time, so we can't pin everything in the same spot and we need to use separate offset. For simplicity, instead of calculating the exact required size, we reserve a 2MB slot for each fw. v2: fail fetch if FW is > 2MBs, improve comments (John) v3: more comment improvements (John) Signed-off-by:
-
Daniele Ceraolo Spurio authored
The FW binaries are independently loaded on each GT. On MTL, the memory is shared so we could potentially re-use a single allocation, but on discrete multi-gt platforms we are going to need independent copies, so it is easier to do the same on MTL as well, given that the amount of duplicated memory is relatively small (~500K). Signed-off-by:
-
Daniele Ceraolo Spurio authored
On MTL the primary GT doesn't have any media capabilities, so no video engines and no HuC. We must therefore skip the HuC fetch and load on that specific case. Given that other multi-GT platforms might have HuC on the primary GT, we can't just check for that and it is easier to instead check for the lack of VCS engines. Based on code from Aravind Iddamsetty v2: clarify which engine_mask is used for each GT and why (Tvrtko) Signed-off-by:
-
Tvrtko Ursulin authored
Since we are now storing the GT backpointer in the wa list we can drop the explicit struct intel_gt * argument to wa_list_apply. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221110124633.3135026-1-tvrtko.ursulin@linux.intel.com
-
Badal Nilawar authored
This workaround is added for Media tile of MTL A step. It is to help pcode workaround which handles the hardware issue seen during package C2/C3 transitions due to RC6 entry/exit transitions on Media tile. As a part of workaround pcode expect kmd to send mailbox message "media busy" when components of Media tile are in use and "media idle" otherwise. As per workaround description gucrc need to be disabled so enabled host based RC for Media tile. v2: - Correct workaround id (Matt) - Fix review comments (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103184559.2306481-1-badal.nilawar@intel.com
-
- 11 Nov, 2022 1 commit
-
-
Riana Tauro authored
Run a workload on tiles simultaneously by requesting for RP0 frequency. Pcode can however limit the frequency being granted due to throttling reasons. This test checks if there is any throttling but does not fail if RP0 is not granted due to throttle reasons v2: Fix build error v3: Use IS_ERR_OR_NULL to check worker Addressed cosmetic review comments (Tvrtko) v4: do not skip test on media engines if gt type is GT_MEDIA. Use correct PERF_LIMIT_REASONS register for MTL (Vinay) Signed-off-by:Riana Tauro <riana.tauro@intel.com> Reviewed-by:
-
- 10 Nov, 2022 2 commits
-
-
Umesh Nerlige Ramappa authored
Fix kernel-doc issue from a previous commit. Signed-off-by:
-
Tvrtko Ursulin authored
Convert some usages of legacy DRM logging macros into versions which tell us on which device have the events occurred. v2: * Don't have struct drm_device as local. (Jani, Ville) v3: * Store gt, not i915, in workaround list. (John) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
- 09 Nov, 2022 1 commit
-
-
Matthew Auld authored
We rely on page_sizes.sg in setup_scratch_page() reporting the correct value if the underlying sgl is not contiguous, however in get_pages_internal() we are only looking at the layout of the created pages when calculating the sg_page_sizes, and not the final sgl, which could in theory be completely different. In such a situation we might incorrectly think we have a 64K scratch page, when it is actually only 4K or similar split over multiple non-contiguous entries, which could lead to broken behaviour when touching the scratch space within the padding of a 64K GTT page-table. For most of the other backends we already just call i915_sg_dma_sizes() on the final mapping, so rather just move that into __i915_gem_object_set_pages() to avoid such issues coming back to bite us later. v2: Update missing conversion in gvt Suggested-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
- 08 Nov, 2022 3 commits
-
-
Matthew Auld authored
Rather than getting some hard to debug uaf, add some warns to hopefully catch issues with userfault_count being non-zero when destroying the object. Also if we somehow add an object to lmem_userfault_list that somehow doesn't map lmem. References: https://gitlab.freedesktop.org/drm/intel/-/issues/7469Signed-off-by:
-
Matthew Auld authored
In the fault handler, make sure we check if the BO maps lmem after we schedule the migration, since the current resource might change from lmem to smem, if the pages are in the non-cpu visible portion of lmem. This then leads to adding the object to the lmem_userfault_list even though the current resource is no longer lmem. If we then destroy the object, the list might still contain a link to the now free object, since we only remove it if the object is still in lmem. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7469 Fixes: ad74457a ("drm/i915/dgfx: Release mmap on rpm suspend") Signed-off-by:
-
Jani Nikula authored
Headers in include/ should be included using the system header #include syntax. Fixes: 887a193b ("drm/i915/pxp: add huc authentication and loading command") Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Vitaly Lubart <vitaly.lubart@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by:
-
- 07 Nov, 2022 6 commits
-
-
Daniele Ceraolo Spurio authored
On MTL there are no BCS engines on the media GT, so we can't always use BCS0 in the test. There is no actual reason to use a BCS engine over an engine of a different class, so switch to using any available engine. Signed-off-by:
-
Daniele Ceraolo Spurio authored
There is no userspace user for this CS yet, we only need it for internal kernel ops (e.g. HuC, PXP), so don't expose it. v2: even if it's not exposed, rename the engine so it is easier to identify in the debug logs (Matt) Signed-off-by:
-
Daniele Ceraolo Spurio authored
The GSC CS has its own dedicated bit in the GDRST register. Bspec: 52549 Signed-off-by:
-
Daniele Ceraolo Spurio authored
The GSC CS re-uses the same interrupt bits that the GSC used in older platforms. This means that we can now have an engine interrupt coming out of OTHER_CLASS, so we need to handle that appropriately. v2: clean up the if statement for the engine irq (Tvrtko) Signed-off-by:
-
Daniele Ceraolo Spurio authored
We need to tell the GuC that the GSC CS is there. Signed-off-by:
-
Daniele Ceraolo Spurio authored
Starting on MTL, the GSC is no longer managed with direct MMIO access, but we instead have a dedicated command streamer for it. As a first step for adding support for this CS, add the required definitions. Note that, although it is now a CS, the GSC retains its old class:instance value (OTHER_CLASS instance 6) Bspec: 65308, 45605 Signed-off-by:
-
