- 19 Oct, 2013 14 commits
-
-
Antonio Quartulli authored
this comment refers to the old batmand codebase and does not make sense anymore. Remove it Signed-off-by:
Antonio Quartulli <antonio@open-mesh.com> Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de>
-
Linus Lüssing authored
With this patch the functions batadv_send_skb_unicast() and batadv_send_skb_unicast_4addr() are further refined into batadv_send_skb_via_tt(), batadv_send_skb_via_tt_4addr() and batadv_send_skb_via_gw(). This way we avoid any "guessing" about where to send a packet in the unicast forwarding methods and let the callers decide. This is going to be useful for the upcoming multicast related patches in particular. Further, the return values were polished a little to use the more appropriate NET_XMIT_* defines. Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Acked-by:
Antonio Quartulli <antonio@meshcoding.com> Signed-off-by:
-
Antonio Quartulli authored
AP isolation has to be enabled on one VLAN interface only. This patch moves the AP isolation attribute to the per-vlan interface attribute set, enabling it to have a different value depending on the selected vlan. Signed-off-by:
-
Antonio Quartulli authored
Each VLAN can now have its own set of attributes which are exported through a new subfolder in the sysfs tree. Each VLAN created on top of a soft_iface will have its own subfolder. The subfolder is named "vlan%VID" and it is created inside the "mesh" sysfs folder belonging to batman-adv. Attributes corresponding to the untagged LAN are stored in the root sysfs folder as before. This patch also creates all the needed macros and data structures to easily handle new VLAN spacific attributes. Signed-off-by:
-
Antonio Quartulli authored
Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by:
-
Antonio Quartulli authored
The same IP subnet can be used on different VLANs, therefore DAT has to differentiate whether the IP to resolve belongs to one or the other virtual LAN. To accomplish this task DAT has to deal with the VLAN tag and store it together with each ARP entry. Signed-off-by:
-
Antonio Quartulli authored
The gateway code is now adapted in order to correctly interact with the Translation Table component by using the vlan ID Signed-off-by:
-
Antonio Quartulli authored
Signed-off-by:
-
Antonio Quartulli authored
now that each TT entry is characterised by a VLAN ID, the latter has to be taken into consideration when computing the local/global table CRC as it would be theoretically possible to have the same client in two different VLANs Signed-off-by:
-
Antonio Quartulli authored
To make the translation table code VLAN-aware, each entry must carry the VLAN ID which it belongs to. This patch adds such attribute to the related TT structures. Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
-
Antonio Quartulli authored
Signed-off-by:
-
Simon Wunderlich authored
My university will stop email service for alumni in january 2014, please use my new e-mail address instead. Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Antonio Quartulli authored
Fix bogus merge conflict resolution by checking the return values of the skb preparation routines. Signed-off-by:
-
- 18 Oct, 2013 26 commits
-
-
stephen hemminger authored
Randy found that if network namespace not enabled then nd_net does not exist and would cause compilation failure. This is handled correctly by using the dev_net() macro. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
Remove the specialized code in __tcp_retransmit_skb() that tries to trim any ACKed payload preceding a FIN before we retransmit (this was added in 1999 in v2.2.3pre3). This trimming code was made unreachable by the more general code added above it that uses tcp_trim_head() to trim any ACKed payload, with or without a FIN (this was added in "[NET]: Add segmentation offload support to TCP." in 2002 circa v2.5.33). Signed-off-by:
Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Claudiu Manoil authored
Under certain low traffic conditions, the single core devices with multiple Rx/Tx queues (MQ mode) may reach soft lockup due to gfar_poll not returning in proper time. The following exception was obtained using iperf on a 100Mbit half-duplex link, for a p1010 single core device: BUG: soft lockup - CPU#0 stuck for 23s! [iperf:2847] Modules linked in: CPU: 0 PID: 2847 Comm: iperf Not tainted 3.12.0-rc3 #16 task: e8bf8000 ti: eeb16000 task.ti: ee646000 NIP: c0255b6c LR: c0367ae8 CTR: c0461c18 REGS: eeb17e70 TRAP: 0901 Not tainted (3.12.0-rc3) MSR: 00029000 <CE,EE,ME> CR: 44228428 XER: 20000000 GPR00: c0367ad4 eeb17f20 e8bf8000 ee01f4b4 00000008 ffffffff ffffffff 00000000 GPR08: 000000c0 00000008 000000ff ffffffc0 000193fe NIP [c0255b6c] find_next_bit+0xb8/0xc4 LR [c0367ae8] gfar_poll+0xc8/0x1d8 Call Trace: [eeb17f20] [c0367ad4] gfar_poll+0xb4/0x1d8 (unreliable) [eeb17f70] [c0422100] net_rx_action+0xa4/0x158 [eeb17fa0] [c003ec6c] __do_softirq+0xcc/0x17c [eeb17ff0] [c000c28c] call_do_softirq+0x24/0x3c [ee647cc0] [c0004660] do_softirq+0x6c/0x94 [ee647ce0] [c003eb9c] local_bh_enable+0x9c/0xa0 [ee647cf0] [c0454fe8] tcp_prequeue_process+0xa4/0xdc [ee647d10] [c0457e44] tcp_recvmsg+0x498/0x96c [ee647d80] [c047b630] inet_recvmsg+0x40/0x64 [ee647da0] [c040ca8c] sock_recvmsg+0x90/0xc0 [ee647e30] [c040edb8] SyS_recvfrom+0x98/0xfc To prevent this, the outer while() loop has been removed allowing gfar_poll() to return faster even if there's still budget left. Also, there's no need to recompute the budget per Rx queue anymore. Signed-off-by:
Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
-
Joe Perches authored
The rtmsg_fib function doesn't modify this argument so mark it const. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Dan Carpenter authored
The current test works fine in practice. The "amount" variable is actually used as a boolean so negative values or any non-zero values count as "true". However since we don't allow numbers greater than one, let's not allow negative numbers either. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
baker.zhang authored
fib_table_lookup has included the rcu lock protection. Signed-off-by:
baker.zhang <baker.kernel@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== 1) Don't use a wildcard SA if a more precise one is in acquire state, from Fan Du. 2) Simplify the SA lookup when using wildcard source. We need to check only the destination in this case, from Fan Du. 3) Add a receive path hook for IPsec virtual tunnel interfaces to xfrm6_mode_tunnel. 4) Add support for IPsec virtual tunnel interfaces to ipv6. ==================== Signed-off-by: -
David S. Miller authored
Himanshu Madhani says: ==================== qlcnic: ethtool enhancements and code cleanup. This patch series contains o updates to ethtool for pause settings and enhance register dump to display mask and ring indices. o cleanup in DCB code and remove redundant eSwitch enablement command. o fixed firmware dump collection logic to skip unknown entries. Changes from v3 -> v4 o Dropped patch for Tx queue validation to be submitted in net. Changes from v2 -> v3 o Updated patch to print informational messages as per Joe Perches's comment. Changes from v1 -> v2 o Dropped patch to register device if adapter is in FAILED state for more rework. o Updated patch to display ring indices via ethtool per Ben Hutchings's comment. o Update patch for DCB cleanup per Stephen Hemminger's comment. Please apply to net-next. ==================== Signed-off-by: -
Himanshu Madhani authored
Signed-off-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
-
Shahed Shaikh authored
o Driver aborts the minidump collection operation when it finds an unknown entry opcode. This patch skips unknown entry type and resumes the minidump collection operation. o Removed a comparision of collected dump size with expected dump size. Size may differ when driver decides to skip an entry. Signed-off-by:
Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by:
-
Sucheta Chakraborty authored
o Move dcb specific function definitions to dcb files. o Move dcb specific variables to qlcnic_dcb structure. Signed-off-by:
Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by:
-
Sony Chacko authored
When more than one NIC physical functions are enabled on a port, eSwitch on that port gets enabled automatically. Driver need not explicitly enable the eSwitch. Signed-off-by:
Sony Chacko <sony.chacko@qlogic.com> Signed-off-by:
-
Jitendra Kalsaria authored
Update ethtool standard pause parameter settings and display Signed-off-by:
Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by:
-
Pratik Pujar authored
o Allow collecting the firmware dump of halted firmware when auto recovery is disabled. Signed-off-by:
Pratik Pujar <pratik.pujar@qlogic.com> Signed-off-by:
-
Pratik Pujar authored
o Updated ethtool -d <ethX> option to display ring indices for Transmit(Tx), Receive(Rx), and Status(St) rings. o Updated ethtool -d <ethX> option to display ring interrupt mask for Transmit(Tx), and Status(St) rings. Signed-off-by:
-
Sucheta Chakraborty authored
Signed-off-by:
-
Eric Dumazet authored
Rename tcp_tso_segment() to tcp_gso_segment(), to better reflect what is going on, and ease grep games. Signed-off-by:
-
David S. Miller authored
Jon Maloy says: ==================== Some small and relatively straightforward patches. With exception of the two first ones they are all unrelated and address minor issues. v2: update of v1 (http://patchwork.ozlabs.org/patch/277404/) -added commit to use memcpy_fromiovec on user data as per v1 feedback -updated sparse fix commit to drop chunks covered by above commit -added new commit that greatly simplifies the link lookup routine ==================== Signed-off-by:
-
Erik Hugne authored
When checking statistics or changing parameters on a link, the link_find_link function is used to locate the link with a given name. The complex method of deconstructing the name into local and remote address/interface is error prone and may fail if the interface names contains special characters. We change the lookup method to iterate over the list of nodes and compare the link names. Signed-off-by:
Erik Hugne <erik.hugne@ericsson.com> Reviewed-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Ying Xue authored
link_cmd_set_value() takes commands for link, bearer and media related configuration. Genereally the function returns 0 when a command is recognized, and -EINVAL when it is not. However, in the switch for link related commands it returns 0 even when the command is unrecognized. This will sometimes make it look as if a failed configuration command has been successful, but has otherwise no negative effects. We remove this anomaly by returning -EINVAL even for link commands. We also rework all three switches to make them conforming to common kernel coding style. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Reviewed-by:
-
Ying Xue authored
Currently, rcv_msg() always returns zero on a packet delivery upcall from net_device. To make its behavior more compliant with the way this API should be used, we change this to let it return NET_RX_SUCCESS (which is zero anyway) when it is able to handle the packet, and NET_RX_DROP otherwise. The latter does not imply any functional change, it only enables the driver to keep more accurate statistics about the fate of delivered packets. Signed-off-by:
-
Ying Xue authored
tipc_block_bearer() currently takes a bearer name (const char*) as argument. This requires the function to make a lookup to find the pointer to the corresponding bearer struct. In the current code base this is not necessary, since the only two callers (tipc_continue(),recv_notification()) already have validated copies of this pointer, and hence can pass it directly in the function call. We change tipc_block_bearer() to directly take struct tipc_bearer* as argument instead. Signed-off-by:
-
Ying Xue authored
TIPC 'bearer' exists as an abstract concept, while 'media' is deemed a specific implementation of a bearer, such as Ethernet or Infiniband media. When a component inside TIPC wants to control a specific media, it only needs to access the generic bearer API to achieve this. However, in the current media implementations, the 'bearer' name is also extensively used in media specific function and variable names. This may create confusion, so we choose to replace the term 'bearer' with 'media' in all function names, variable names, and prefixes where this is what really is meant. Note that this change is cosmetic only, and no runtime behaviour changes are made here. Signed-off-by:
-
Ying Xue authored
Eliminate below sparse warnings: net/tipc/link.c:1210:37: warning: cast removes address space of expression net/tipc/link.c:1218:59: warning: incorrect type in argument 2 (different address spaces) net/tipc/link.c:1218:59: expected void const [noderef] <asn:1>*from net/tipc/link.c:1218:59: got unsigned char const [usertype] *[assigned] sect_crs net/tipc/socket.c:341:49: warning: Using plain integer as NULL pointer net/tipc/socket.c:1371:36: warning: Using plain integer as NULL pointer net/tipc/socket.c:1694:57: warning: Using plain integer as NULL pointer Signed-off-by:
Andreas Bofjäll <andreas.bofjall@ericsson.com> Reviewed-by:
-
Ying Xue authored
tipc_msg_build() now copies message data from iovec to skb_buff using memcpy_fromiovecend(), which doesn't need to be passed the iovec length to perform the copying. So we remove the parameter indicating iovec length in all functions where TIPC messages are built and sent. Signed-off-by:
-
Ying Xue authored
tipc_msg_build() calls skb_copy_to_linear_data_offset() to copy data from user space to kernel space. However, the latter function does in its turn call memcpy() to perform the actual copying. This poses an obvious security and robustness risk, since memcpy() never makes any validity check on the pointer it is copying from. To correct this, we the replace the offending function call with a call to memcpy_fromiovecend(), which uses copy_from_user() to perform the copying. Signed-off-by:
-
