- 13 May, 2010 40 commits
-
-
-
Joe Perches authored
This patch removes from net/ netfilter files all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' Signed-off-by:Joe Perches <joe@perches.com> [Patrick: changed to keep return statements in otherwise empty function bodies] Signed-off-by:
Patrick McHardy <kaber@trash.net>
-
Stephen Hemminger authored
Make sure all printk messages have a severity level. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Stephen Hemminger authored
Change netfilter asserts to standard WARN_ON. This has the benefit of backtrace info and also causes netfilter errors to show up on kerneloops.org. Signed-off-by:
-
Bart De Schuymer authored
[ 4593.956206] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 4593.956219] IP: [<ffffffffa03357a4>] br_nf_forward_finish+0x154/0x170 [bridge] [ 4593.956232] PGD 195ece067 PUD 1ba005067 PMD 0 [ 4593.956241] Oops: 0000 [#1] SMP [ 4593.956248] last sysfs file: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/ATK0110:00/hwmon/hwmon0/temp2_label [ 4593.956253] CPU 3 ... [ 4593.956380] Pid: 29512, comm: kvm Not tainted 2.6.34-rc7-net #195 P6T DELUXE/System Product Name [ 4593.956384] RIP: 0010:[<ffffffffa03357a4>] [<ffffffffa03357a4>] br_nf_forward_finish+0x154/0x170 [bridge] [ 4593.956395] RSP: 0018:ffff880001e63b78 EFLAGS: 00010246 [ 4593.956399] RAX: 0000000000000608 RBX: ffff880057181700 RCX: ffff8801b813d000 [ 4593.956402] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff880057181700 [ 4593.956406] RBP: ffff880001e63ba8 R08: ffff8801b9d97000 R09: ffffffffa0335650 [ 4593.956410] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801b813d000 [ 4593.956413] R13: ffffffff81ab3940 R14: ffff880057181700 R15: 0000000000000002 [ 4593.956418] FS: 00007fc40d380710(0000) GS:ffff880001e60000(0000) knlGS:0000000000000000 [ 4593.956422] CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b [ 4593.956426] CR2: 0000000000000018 CR3: 00000001ba1d7000 CR4: 00000000000026e0 [ 4593.956429] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4593.956433] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 4593.956437] Process kvm (pid: 29512, threadinfo ffff8801ba566000, task ffff8801b8003870) [ 4593.956441] Stack: [ 4593.956443] 0000000100000020 ffff880001e63ba0 ffff880001e63ba0 ffff880057181700 [ 4593.956451] <0> ffffffffa0335650 ffffffff81ab3940 ffff880001e63bd8 ffffffffa03350e6 [ 4593.956462] <0> ffff880001e63c40 000000000000024d ffff880057181700 0000000080000000 [ 4593.956474] Call Trace: [ 4593.956478] <IRQ> [ 4593.956488] [<ffffffffa0335650>] ? br_nf_forward_finish+0x0/0x170 [bridge] [ 4593.956496] [<ffffffffa03350e6>] NF_HOOK_THRESH+0x56/0x60 [bridge] [ 4593.956504] [<ffffffffa0335282>] br_nf_forward_arp+0x112/0x120 [bridge] [ 4593.956511] [<ffffffff813f7184>] nf_iterate+0x64/0xa0 [ 4593.956519] [<ffffffffa032f920>] ? br_forward_finish+0x0/0x60 [bridge] [ 4593.956524] [<ffffffff813f722c>] nf_hook_slow+0x6c/0x100 [ 4593.956531] [<ffffffffa032f920>] ? br_forward_finish+0x0/0x60 [bridge] [ 4593.956538] [<ffffffffa032f800>] ? __br_forward+0x0/0xc0 [bridge] [ 4593.956545] [<ffffffffa032f86d>] __br_forward+0x6d/0xc0 [bridge] [ 4593.956550] [<ffffffff813c5d8e>] ? skb_clone+0x3e/0x70 [ 4593.956557] [<ffffffffa032f462>] deliver_clone+0x32/0x60 [bridge] [ 4593.956564] [<ffffffffa032f6b6>] br_flood+0xa6/0xe0 [bridge] [ 4593.956571] [<ffffffffa032f800>] ? __br_forward+0x0/0xc0 [bridge] Don't call nf_bridge_update_protocol() for ARP traffic as skb->nf_bridge isn't used in the ARP case. Reported-by:
Bart De Schuymer <bdschuym@pandora.be> Signed-off-by:
-
Dimitris Michailidis authored
Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dimitris Michailidis authored
Report the PCIe link speed (2.5 or 5 Gbps). Signed-off-by:
-
Dimitris Michailidis authored
HW VLAN extraction needs to be configured through FW to work correctly in virtualization environments. Remove the direct register manipulation and rely on FW. Signed-off-by:
-
Bruce Allan authored
Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Bruce Allan authored
i) Fixes a bug where e1000_sw_lcd_config_ich8lan() was calling e1000_lan_init_done_ich8lan() to poll the STATUS.LAN_INIT_DONE bit to make sure the MAC had completed the PHY configuration. However, e1000_lan_init_done_ich8lan() had already been called in one of the two places where PHY reset occurs for ICHx/PCHx parts, which caused the second call to busy-wait for 150 msec because the LAN_INIT_DONE bit had already been checked and cleared. ii) Cleanup the two separate PHY reset code paths, i.e. the full-chip reset in e1000_reset_hw_ich8lan() and the PHY-only reset in e1000_phy_hw_reset_ich8lan(). There was duplicate code in both paths to be performed post-reset that are now combined into one new function - e1000_post_phy_reset_ich8lan(). This cleanup also included moving the clearing of the PHY Reset Asserted bit in the STATUS register (now done for all ICH/PCH parts) and the check for the indication from h/w that basic configuration has completed back to where it previously was in e1000_get_cfg_done_ich8lan(). iii) Corrected a few comments Signed-off-by:
-
Bruce Allan authored
The flow control refresh timer value needs to be saved off so that it can be programmed into the approrpiate register when applicable but without a reset, e.g. when changing flow control parameters via ethtool. Signed-off-by:
-
Bruce Allan authored
The mac->arc_subsystem was being incorrectly used to flag whether or not manageability was enabled when it should only be used to state whether the ARC (Host interface) subsystem is available on a particular MAC _and_ only valid when any manageability is enabled. The ARC subsystem is currently only available on 80003es2lan and 82573 parts supported by the driver. A new flag, has_fwsm, is introduced to be used when checking if manageability is enabled but only on parts that acutally have an FWSM register. While the above parts have an FWSM register, there are other parts that have FWSM but do not have support for the ARC subsystem, namely 82571/2 and ICHx/PCH. And then there are parts that have manageability, but do not have either FWSM register or support for the ARC subsystem - these are 82574 and 82583. For 80003es2lan, 82571/2/3 and ICH/PCH parts, this patch makes no functional changes, it only corrects the usage of the manageability flags. For 82574 and 82583, it fixes the incorrect accesses of the non-existent FWSM register and ARC subsystem as well as corrects the check for management pass-through. Signed-off-by:
-
Bruce Allan authored
The force_speed_duplex function pointer was incorrectly set. Instead of calling the 82577-specific version it was calling the m88 version which, among other incorrect things, reset the PHY causing autonegotiation to be re-enabled in the PHY resulting in the link defaulting to half-duplex. The 82577-specific force_speed_duplex function also had an issue where it disabled Auto-MDI-X which caused the link to not come up. Signed-off-by:
-
Bruce Allan authored
After every reset all ICH/PCH parts call this function which acquires the swflag, performs a workaround on applicable parts and releases the swflag. There is no reason for parts for which this workaround is not applicable to acquire and release the swflag so the function should just return without doing anything for these parts. This also provides for the indentation of most of the function contents to be shifted left cleaning up the code. Signed-off-by:
-
Bruce Allan authored
Patch addresses issues when manageability passthrough is enabled, but the MAC_ADDR_FILTER bit is not set in the MANC register. Signed-off-by:
-
Bruce Allan authored
...in e1000_update_nvm_checksum_ich8lan(). Signed-off-by:
-
Bruce Allan authored
In MSI-X mode when an IMPI SoL session was active (i.e. the PHY reset was blocked), the LSC interrupt generated by s/w to start the watchdog which started the transmitter was not getting fired by the hardware because bit 24 (the 'other' cause bit) also needed to be set. Without an active SoL session, the PHY was reset which caused the h/w to fire the LSC interrupt. Signed-off-by:
-
Bruce Allan authored
82574/82583 uses different registers/bits to setup manageability filters than all other parts supported by e1000e; set them accordingly for IPMI pass-through. Rename the function to better reflect what it does. Signed-off-by:
-
Bruce Allan authored
When running ethtool online diagnostics with no open interface, there is a short period of time where the driver relinquishes control of the adapter during which time AMT (manageability firmware) can put the adapter into an unknown state resulting in such things as link test failure, hardware hang, reporting an incorrect link speed, etc. Resetting the adapter during an open() resolves this by putting the adapter into a quiescent state. Signed-off-by:
-
Bruce Allan authored
A couple stack cleanups missed in an earlier patch from Jesse. Signed-off-by:
-
-
Amit Kumar Salecha authored
Check the access by tools for hardware queue engine and handle it separately than other block registers, otherwise incorrect data is returned. Support for only NX3031 based cards. Acked-by:
Dhananjay Phadke <dhananjay.phadke@qlogic.com> Signed-off-by:
Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by:
-
Sucheta Chakraborty authored
Remove unnecessary remap of the region in bar 0 to access onhip memory for NX3031. Signed-off-by:
Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by:
-
Sucheta Chakraborty authored
NX3031 have 64bit on card memory. Fix the limit check to 64MB and remove unnecessary 128bit read/write check. Signed-off-by:
-
Amit Kumar Salecha authored
o For NX3031, MSI_MODE, CAPABILITIES_FW and SCRATCHPAD registers are obsolete. These register addresses can be used for different purpose. Signed-off-by:
-
Allan Stephens authored
Convert tipc_msg_* inline routines that are more than one line into standard functions, thereby eliminating some repeated code. Signed-off-by:
Allan Stephens <allan.stephens@windriver.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Allan Stephens authored
Convert buf_acquire inline routine that is more than one line into a standard function, thereby eliminating some repeated code. Signed-off-by:
-
Allan Stephens authored
Convert bearer congestion inline routine that is more than one line into a standard function, thereby eliminating some repeated code. Signed-off-by:
-
Allan Stephens authored
Converts port list inline routines that are more than one line into standard functions, thereby eliminating a significant amount of repeated code. Signed-off-by:
-
Allan Stephens authored
Converts nmap inline routines that are more than one line into standard functions, thereby eliminating a significant amount of repeated code. Signed-off-by:
-
Allan Stephens authored
Convert address-related inline routines that are more than one line into standard functions, thereby eliminating a significant amount of repeated code. Signed-off-by:
-
Allan Stephens authored
These functions have enough code in them such that they seem like sensible targets for un-inlining. Prior to doing that, this adds the tipc_ prefix to the functions, so that in the event of a panic dump or similar, the subsystem from which the functions come from is immediately clear. Signed-off-by:
-
Allan Stephens authored
Rather than live in link.c where they can only be used in that file alone, these helper routines are better served by being in link.h Relocated are the following: link_working_working link_working_unknown link_reset_unknown link_reset_reset link_blocked link_congested Signed-off-by:
-
Allan Stephens authored
This is just a straight return of a field; there is no value in the abstraction of hiding it behind a function. Signed-off-by:
-
Allan Stephens authored
Eliminate comments in TIPC's main API files that are either obsolete, incorrect, misleading, or unhelpful. It also adds in one new comment. Signed-off-by:
-
Allan Stephens authored
Provide initial support for displaying overall TIPC status/statistics information at runtime. Currently, only version info for the TIPC kernel module is displayed. Signed-off-by:
-
Allan Stephens authored
Make a cosmetic change to the name displayed for the broadcast link, to better reflect its true nature. Since TIPC utilizes this link to distribute name table information, in addition to multicast messages sent by user applications, the prior name "multicast-link" is no longer appropriate. Signed-off-by:
-
Allan Stephens authored
Eliminate a couple of instances where TIPC's native API send routines were doing pointless initialization of local variables. Signed-off-by:
-
Allan Stephens authored
Eliminate some unused data structures in the TIPC configuration service that relate to the handling of link subscriptions, which were not supported when TIPC 1.5 was introduced. If and when support for link subscriptions is offered in TIPC, these elements may need to be re-introduced. Signed-off-by:
-
Allan Stephens authored
Eliminate an argument in a print statement that has no corresponding format specification. Signed-off-by:
-
