This macro's last use was removed in commit d769ef81
("RDS: Update rds_conn_shutdown to work with rds_conn_path")
so make the macro and the __rds_conn_error function definition
and declaration disappear.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need to call ether_setup after alloc_ethdev since it was
already called there.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the gateway is set on an ILA route we don't need to bother with using
the destination cache in the ILA route. Translation does not change the
routing in this case so we can stick with orig_output in the lwstate
output function.

Tested: Ran netperf with and without gateway for LWT route.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This l3mdev_ops structure is only stored in the l3mdev_ops field of a
net_device structure.  This field is declared const, so the l3mdev_ops
structure can be declared as const also.  Additionally drop the
__read_mostly annotation.

The semantic patch that adds const is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct l3mdev_ops i@p = { ... };

@ok@
identifier r.i;
struct net_device *e;
position p;
@@
e->l3mdev_ops = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
struct l3mdev_ops e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct l3mdev_ops i = { ... };
// </smpl>

The effect on the layout of the .o file is shown by the following output
of the size command, first before then after the transformation:

   text    data     bss     dec     hex filename
   7364     466      52    7882    1eca drivers/net/ipvlan/ipvlan_main.o
   7412     434      52    7898    1eda drivers/net/ipvlan/ipvlan_main.o
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tom Herbert says:

====================
ila: Cache a route in ILA lwt structure

Add a dst_cache to ila_lwt structure. This holds a cached route for the
translated address. In ila_output we now perform a route lookup after
translation and if possible (destination in original route is full 128
bits) we set the dst_cache. Subsequent calls to ila_output can then use
the cache to avoid the route lookup.

This eliminates the need to set the gateway on ILA routes as previously
was being done. Now we can do somthing like:

./ip route add 3333::2000:0:0:2/128 encap ila 2222:0:0:2 \
    csum-mode neutral-map dev eth0  ## No via needed!

Also, add destroy_state to lwt ops. We need this do destroy the
dst_cache.

- v2
  - Fixed comparisons to fc_dst_len to make comparison against number
    of bits in data structure not bytes.
  - Move destroy_state under build_state (requested by Jiri)
  - Other minor cleanup

Tested:

Running 200 TCP_RR streams:

  Baseline, no ILA

    1730716 tps
    102/170/313 50/90/99% latencies
    88.11 CPU utilization

  Using ILA in both directions

    1680428 tps
    105/176/325 50/90/99% latencies
    88.16 CPU utilization
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a dst_cache to ila_lwt structure. This holds a cached route for the
translated address. In ila_output we now perform a route lookup after
translation and if possible (destination in original route is full 128
bits) we set the dst_cache. Subsequent calls to ila_output can then use
the cache to avoid the route lookup.

This eliminates the need to set the gateway on ILA routes as previously
was being done. Now we can do something like:

./ip route add 3333::2000:0:0:2/128 encap ila 2222:0:0:2 \
    csum-mode neutral-map dev eth0  ## No via needed!
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Users of lwt tunnels may set up some secondary state in build_state
function. Add a corresponding destroy_state function to allow users to
clean up state. This destroy state function is called from lwstate_free.
Also, we now free lwstate using kfree_rcu so user can assume structure
is not freed before rcu.
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Taku Izumi says:

====================
FUJITSU Extended Socket driver version 1.2

This patchset updates FUJITSU Extended Socket network driver into version 1.2.
This includes the following enhancements:
  - ethtool -d support
  - ethtool -S enhancement
  - ethtool -w/-W support
  - Add some debugging feature (tracepoints etc)

v1 -> v2:
  - Use u64 instead of phys_addr_t as TP_STRUCT__entry
  - Use ethtool facility to achieve debug mode instead of using debugfs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds debugfs entry to show EP status information.
You can get each EP's status information like the following:

  # cat /sys/kernel/debug/fjes/fjes.0/status

EPID    STATUS           SAME_ZONE        CONNECTED
ep0     shared           Y                Y
ep1     -                -                -
ep2     unshared         N                N
ep3     unshared         N                N
ep4     unshared         N                N
ep5     unshared         N                N
ep6     unshared         N                N
ep7     unshared         N                N
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds implementation of supporting
ethtool -w and -W for fjes driver.

You can enable and disable firmware debug mode by
using ethtool -W, and also retrieve firmware
activity information by using ethtool -w.

This is useful for debugging.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds tracepoints in fjes driver.
This is useful for debugging purpose.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enhances ethtool -S for fjes driver so that
EP related statistics can be retrieved.

The following statistics can be displayed via ethtool -S:

     ep%d_com_regist_buf_exec
     ep%d_com_unregist_buf_exec
     ep%d_send_intr_rx
     ep%d_send_intr_unshare
     ep%d_send_intr_zoneupdate
     ep%d_recv_intr_rx
     ep%d_recv_intr_unshare
     ep%d_recv_intr_stop
     ep%d_recv_intr_zoneupdate
     ep%d_tx_buffer_full
     ep%d_tx_dropped_not_shared
     ep%d_tx_dropped_ver_mismatch
     ep%d_tx_dropped_buf_size_mismatch
     ep%d_tx_dropped_vlanid_mismatch
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds implementation of supporting
ethtool -d for fjes driver. By using ethtool -d,
you can get registers dump of Exetnded socket device.

  # ethtool -d es0

Offset          Values
------          ------
0x0000:         01 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00
0x0010:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0020:         02 00 00 80 02 00 00 80 64 a6 58 08 07 00 00 00
0x0030:         00 00 00 00 28 80 00 00 00 00 f9 e3 06 00 00 00
0x0040:         00 00 00 00 18 00 00 00 80 a4 58 08 07 00 00 00
0x0050:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0060:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0070:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0080:         00 00 00 00 00 00 e0 7f 00 00 01 00 00 00 01 00
0x0090:         00 00 00 00
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Manish Chopra says:

====================
qed*: driver updates

There are several new additions in this series;
Most are connected to either Tx offloading or Rx classifications
[either fastpath changes or supporting configuration].

In addition, there's a single IOV enhancement.

Please consider applying this series to `net-next'.

V2->V3:
Fixes below kbuild warning
call to '__compiletime_assert_60' declared with
attribute error: Need native word sized stores/loads for atomicity.

V1->V2:
Added a fix for the race in ramrod handling
pointed by Eric Dumazet [patch 7].
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

While handling SPQ ramrod completion, there is a possible race
where driver might not read updated fw return code based on
ramrod completion done. This patch ensures that fw return code
is written first and then completion done flag is updated
using appropriate memory barriers.
Signed-off-by: Manish Chopra <manish.chopra@caviumnetworks.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Malicious VFs might be caught in several different methods:
  - Misusing their bar permission and being blocked by hardware.
  - Misusing their fastpath logic and being blocked by firmware.
  - Misusing their interaction with their PF via hw-channel,
    and being blocked by PF driver.

On the first two items, firmware would indicate to driver that
the VF is to be considered malicious, but would sometime still
allow the VF to communicate with the PF [depending on the exact
nature of the malicious activity done by the VF].
The current existing logic on the PF side lacks handling of such events,
and might allow the PF to perform some incorrect configuration on behalf
of a VF that was previously indicated as malicious.

The new scheme is simple -
Once the PF determines a VF is malicious it would:
 a. Ignore any further requests on behalf of the VF-driver.
 b. Prevent any configurations initiated by the hyperuser for
    the malicious VF, as firmware isn't willing to serve such.

The malicious indication would be cleared upon the VF flr,
after which it would become usable once again.
Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Whenever a ramrod is being sent for some device configuration,
the driver is going to sleep at least 5ms between each iteration
of polling on the completion of the ramrod.

However, in almost every configuration scenario the firmware
would be able to comply and complete the ramrod in a manner of
several usecs. This is especially important in cases where there
might be a lot of sequential configurations applying to the hardware
[e.g., RoCE], in which case the existing scheme might cause some
visible user delays.

This patch changes the completion scheme - instead of immediately
starting to sleep for a 'long' period, allow the device to quickly
poll on the first iteration after a couple of usecs.
Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Apparently qede fails to set IFF_UNICAST_FLT, and as a result is not
actually performing unicast MAC filtering.
While we're at it - relax a hard-coded limitation that limits each
interface into using at most 15 unicast MAC addresses before turning
promiscuous. Instead utilize the HW resources to their limit.
Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Due to hardware limitation, when transmitting a geneve-encapsulated
packet with more than 32 bytes worth of geneve options the hardware
would not be able to crack the packet and consider it a regular UDP
packet.

This implements the ndo_features_check() in qede in order to prevent
GSO on said transmitted packets.
Signed-off-by: Manish Chopra <manish.chopra@caviumnetworks.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds GSO support for GRE and UDP tunnels
where outer checksums are enabled.
Signed-off-by: Manish Chopra <manish.chopra@caviumnetworks.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some hypervisors can support MAC hints to their VFs.
Even though we don't have such a hypervisor API in linux, we add
sufficient logic for the VF to be able to receive such hints and
set the mac accordingly - as long as the VF has not been set with
a MAC already.
Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shmulik Ladkani says:

====================
act_mirred: Ingress actions support

This patch series implements action mirred 'ingress' actions
TCA_INGRESS_REDIR and TCA_INGRESS_MIRROR.

This allows attaching filters whose target is to hand matching skbs into
the rx processing of a specified device.

v4:
  in 4/4, check ret code of netif_receive_skb, as suggested by Cong Wang
v3:
  in 4/4, addressed non coherency due to reading m->tcfm_eaction multiple
  times, as spotted by Eric Dumazet
v2:
  in 1/4, declare tcfm_mac_header_xmit as bool instead of int
====================
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Up until now, 'action mirred' supported only egress actions (either
TCA_EGRESS_REDIR or TCA_EGRESS_MIRROR).

This patch implements the corresponding ingress actions
TCA_INGRESS_REDIR and TCA_INGRESS_MIRROR.

This allows attaching filters whose target is to hand matching skbs into
the rx processing of a specified device.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These accessors are used in various drivers that support tc offloading,
to detect properties of a given 'tc_action'.

'is_tcf_mirred_redirect' tests that the action is TCA_EGRESS_REDIR.
'is_tcf_mirred_mirror' tests that the action is TCA_EGRESS_MIRROR.

As a prep towards supporting INGRESS redir/mirror, rename these
predicates to reflect their true meaning:
  s/is_tcf_mirred_redirect/is_tcf_mirred_egress_redirect/
  s/is_tcf_mirred_mirror/is_tcf_mirred_egress_mirror/
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move detection logic that tests whether device expects skb data to point
at mac_header upon xmit into a function.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'tcfm_ok_push' specifies whether a mac_len sized push is needed upon
egress to the target device (if action is performed at ingress).

Rename it to 'tcfm_mac_header_xmit' as this is actually an attribute of
the target device (and use a bool instead of int).

This allows to decouple the attribute from the action to be taken.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Edge-Rate cleanup include the following:
- Updated device tree bindings documentation for edge-rate
- The edge-rate is now specified as a "slowdown", meaning that it is now
  being specified as positive values instead of negative (both
  documentation and implementation wise).
- Only explicitly documented values for "vsc8531,vddmac" and
  "vsc8531,edge-slowdown" are accepted by the device driver.
- Deleted include/dt-bindings/net/mscc-phy-vsc8531.h as it was not needed.
- Read/validate devicetree settings in probe instead of init
Signed-off-by: Allan W. Nielsen <allan.nielsen@microsemi.com>
Signed-off-by: Raju Lakkaraju <raju.lakkaraju@microsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 6ae23ad3.

The code has been in kernel since 4.4 but there are no in tree
code that uses. Unused code is broken code, remove it.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix various build warnings in tlan/qed/xen-netback drivers, from
    Arnd Bergmann.

 2) Propagate proper error code in strparser's strp_recv(), from Geert
    Uytterhoeven.

 3) Fix accidental broadcast of RTM_GETTFILTER responses, from Eric
    Dumazret.

 4) Need to use list_for_each_entry_safe() in qed driver, from Wei
    Yongjun.

 5) Openvswitch 802.1AD bug fixes from Jiri Benc.

 6) Cure BUILD_BUG_ON() in mlx5 driver, from Tom Herbert.

 7) Fix UDP ipv6 checksumming in netvsc driver, from Stephen Hemminger.

 8) stmmac driver fixes from Giuseppe CAVALLARO.

 9) Fix access to mangled IP6CB in tcp, from Eric Dumazet.

10) Fix info leaks in tipc and rtnetlink, from Dan Carpenter.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
  net: bridge: add the multicast_flood flag attribute to brport_attrs
  net: axienet: Remove unused parameter from __axienet_device_reset
  liquidio: CN23XX: fix a loop timeout
  net: rtnl: info leak in rtnl_fill_vfinfo()
  tipc: info leak in __tipc_nl_add_udp_addr()
  net: ipv4: Do not drop to make_route if oif is l3mdev
  net: phy: Trigger state machine on state change and not polling.
  ipv6: tcp: restore IP6CB for pktoptions skbs
  netvsc: Remove mistaken udp.h inclusion.
  xen-netback: fix type mismatch warning
  stmmac: fix error check when init ptp
  stmmac: fix ptp init for gmac4
  qed: fix old-style function definition
  netvsc: fix checksum on UDP IPV6
  net_sched: reorder pernet ops and act ops registrations
  xen-netback: fix guest Rx stall detection (after guest Rx refactor)
  drivers/ptp: Fix kernel memory disclosure
  net/mlx5: Add MLX5_ARRAY_SET64 to fix BUILD_BUG_ON
  qmi_wwan: add support for Quectel EC21 and EC25
  openvswitch: add NETIF_F_HW_VLAN_STAG_TX to internal dev
  ...

Pull NFS client updates from Anna Schumaker:
 "Highlights include:

  Stable bugfixes:
   - sunrpc: fix writ espace race causing stalls
   - NFS: Fix inode corruption in nfs_prime_dcache()
   - NFSv4: Don't report revoked delegations as valid in nfs_have_delegation()
   - NFSv4: nfs4_copy_delegation_stateid() must fail if the delegation is invalid
   - NFSv4: Open state recovery must account for file permission changes
   - NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic

  Features:
   - Add support for tracking multiple layout types with an ordered list
   - Add support for using multiple backchannel threads on the client
   - Add support for pNFS file layout session trunking
   - Delay xprtrdma use of DMA API (for device driver removal)
   - Add support for xprtrdma remote invalidation
   - Add support for larger xprtrdma inline thresholds
   - Use a scatter/gather list for sending xprtrdma RPC calls
   - Add support for the CB_NOTIFY_LOCK callback
   - Improve hashing sunrpc auth_creds by using both uid and gid

  Bugfixes:
   - Fix xprtrdma use of DMA API
   - Validate filenames before adding to the dcache
   - Fix corruption of xdr->nwords in xdr_copy_to_scratch
   - Fix setting buffer length in xdr_set_next_buffer()
   - Don't deadlock the state manager on the SEQUENCE status flags
   - Various delegation and stateid related fixes
   - Retry operations if an interrupted slot receives EREMOTEIO
   - Make nfs boot time y2038 safe"

* tag 'nfs-for-4.9-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (100 commits)
  NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic
  fs: nfs: Make nfs boot time y2038 safe
  sunrpc: replace generic auth_cred hash with auth-specific function
  sunrpc: add RPCSEC_GSS hash_cred() function
  sunrpc: add auth_unix hash_cred() function
  sunrpc: add generic_auth hash_cred() function
  sunrpc: add hash_cred() function to rpc_authops struct
  Retry operation on EREMOTEIO on an interrupted slot
  pNFS: Fix atime updates on pNFS clients
  sunrpc: queue work on system_power_efficient_wq
  NFSv4.1: Even if the stateid is OK, we may need to recover the open modes
  NFSv4: If recovery failed for a specific open stateid, then don't retry
  NFSv4: Fix retry issues with nfs41_test/free_stateid
  NFSv4: Open state recovery must account for file permission changes
  NFSv4: Mark the lock and open stateids as invalid after freeing them
  NFSv4: Don't test open_stateid unless it is set
  NFSv4: nfs4_do_handle_exception() handle revoke/expiry of a single stateid
  NFS: Always call nfs_inode_find_state_and_recover() when revoking a delegation
  NFSv4: Fix a race when updating an open_stateid
  NFSv4: Fix a race in nfs_inode_reclaim_delegation()
  ...

Pull nfsd updates from Bruce Fields:
 "Some RDMA work and some good bugfixes, and two new features that could
  benefit from user testing:

   - Anna Schumacker contributed a simple NFSv4.2 COPY implementation.
     COPY is already supported on the client side, so a call to
     copy_file_range() on a recent client should now result in a
     server-side copy that doesn't require all the data to make a round
     trip to the client and back.

   - Jeff Layton implemented callbacks to notify clients when contended
     locks become available, which should reduce latency on workloads
     with contended locks"

* tag 'nfsd-4.9' of git://linux-nfs.org/~bfields/linux:
  NFSD: Implement the COPY call
  nfsd: handle EUCLEAN
  nfsd: only WARN once on unmapped errors
  exportfs: be careful to only return expected errors.
  nfsd4: setclientid_confirm with unmatched verifier should fail
  nfsd: randomize SETCLIENTID reply to help distinguish servers
  nfsd: set the MAY_NOTIFY_LOCK flag in OPEN replies
  nfs: add a new NFS4_OPEN_RESULT_MAY_NOTIFY_LOCK constant
  nfsd: add a LRU list for blocked locks
  nfsd: have nfsd4_lock use blocking locks for v4.1+ locks
  nfsd: plumb in a CB_NOTIFY_LOCK operation
  NFSD: fix corruption in notifier registration
  svcrdma: support Remote Invalidation
  svcrdma: Server-side support for rpcrdma_connect_private
  rpcrdma: RDMA/CM private message data structure
  svcrdma: Skip put_page() when send_reply() fails
  svcrdma: Tail iovec leaves an orphaned DMA mapping
  nfsd: fix dprintk in nfsd4_encode_getdeviceinfo
  nfsd: eliminate cb_minorversion field
  nfsd: don't set a FL_LAYOUT lease for flexfiles layouts

Merge tag 'xfs-reflink-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs

    < XFS has gained super CoW powers! >
     ----------------------------------
            \   ^__^
             \  (oo)\_______
                (__)\       )\/\
                    ||----w |
                    ||     ||

Pull XFS support for shared data extents from Dave Chinner:
 "This is the second part of the XFS updates for this merge cycle.  This
  pullreq contains the new shared data extents feature for XFS.

  Given the complexity and size of this change I am expecting - like the
  addition of reverse mapping last cycle - that there will be some
  follow-up bug fixes and cleanups around the -rc3 stage for issues that
  I'm sure will show up once the code hits a wider userbase.

  What it is:

  At the most basic level we are simply adding shared data extents to
  XFS - i.e. a single extent on disk can now have multiple owners. To do
  this we have to add new on-disk features to both track the shared
  extents and the number of times they've been shared. This is done by
  the new "refcount" btree that sits in every allocation group. When we
  share or unshare an extent, this tree gets updated.

  Along with this new tree, the reverse mapping tree needs to be updated
  to track each owner or a shared extent. This also needs to be updated
  ever share/unshare operation. These interactions at extent allocation
  and freeing time have complex ordering and recovery constraints, so
  there's a significant amount of new intent-based transaction code to
  ensure that operations are performed atomically from both the runtime
  and integrity/crash recovery perspectives.

  We also need to break sharing when writes hit a shared extent - this
  is where the new copy-on-write implementation comes in. We allocate
  new storage and copy the original data along with the overwrite data
  into the new location. We only do this for data as we don't share
  metadata at all - each inode has it's own metadata that tracks the
  shared data extents, the extents undergoing CoW and it's own private
  extents.

  Of course, being XFS, nothing is simple - we use delayed allocation
  for CoW similar to how we use it for normal writes. ENOSPC is a
  significant issue here - we build on the reservation code added in
  4.8-rc1 with the reverse mapping feature to ensure we don't get
  spurious ENOSPC issues part way through a CoW operation. These
  mechanisms also help minimise fragmentation due to repeated CoW
  operations. To further reduce fragmentation overhead, we've also
  introduced a CoW extent size hint, which indicates how large a region
  we should allocate when we execute a CoW operation.

  With all this functionality in place, we can hook up .copy_file_range,
  .clone_file_range and .dedupe_file_range and we gain all the
  capabilities of reflink and other vfs provided functionality that
  enable manipulation to shared extents. We also added a fallocate mode
  that explicitly unshares a range of a file, which we implemented as an
  explicit CoW of all the shared extents in a file.

  As such, it's a huge chunk of new functionality with new on-disk
  format features and internal infrastructure. It warns at mount time as
  an experimental feature and that it may eat data (as we do with all
  new on-disk features until they stabilise). We have not released
  userspace suport for it yet - userspace support currently requires
  download from Darrick's xfsprogs repo and build from source, so the
  access to this feature is really developer/tester only at this point.
  Initial userspace support will be released at the same time the kernel
  with this code in it is released.

  The new code causes 5-6 new failures with xfstests - these aren't
  serious functional failures but things the output of tests changing
  slightly due to perturbations in layouts, space usage, etc. OTOH,
  we've added 150+ new tests to xfstests that specifically exercise this
  new functionality so it's got far better test coverage than any
  functionality we've previously added to XFS.

  Darrick has done a pretty amazing job getting us to this stage, and
  special mention also needs to go to Christoph (review, testing,
  improvements and bug fixes) and Brian (caught several intricate bugs
  during review) for the effort they've also put in.

  Summary:

   - unshare range (FALLOC_FL_UNSHARE) support for fallocate

   - copy-on-write extent size hints (FS_XFLAG_COWEXTSIZE) for fsxattr
     interface

   - shared extent support for XFS

   - copy-on-write support for shared extents

   - copy_file_range support

   - clone_file_range support (implements reflink)

   - dedupe_file_range support

   - defrag support for reverse mapping enabled filesystems"

* tag 'xfs-reflink-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (71 commits)
  xfs: convert COW blocks to real blocks before unwritten extent conversion
  xfs: rework refcount cow recovery error handling
  xfs: clear reflink flag if setting realtime flag
  xfs: fix error initialization
  xfs: fix label inaccuracies
  xfs: remove isize check from unshare operation
  xfs: reduce stack usage of _reflink_clear_inode_flag
  xfs: check inode reflink flag before calling reflink functions
  xfs: implement swapext for rmap filesystems
  xfs: refactor swapext code
  xfs: various swapext cleanups
  xfs: recognize the reflink feature bit
  xfs: simulate per-AG reservations being critically low
  xfs: don't mix reflink and DAX mode for now
  xfs: check for invalid inode reflink flags
  xfs: set a default CoW extent size of 32 blocks
  xfs: convert unwritten status of reverse mappings for shared files
  xfs: use interval query for rmap alloc operations on shared files
  xfs: add shared rmap map/unmap/convert log item types
  xfs: increase log reservations for reflink
  ...

PCI changes for the v4.9 merge window:
 "Here are some more changes I'd like to have in v4.9.  There's one
  small Tegra bug fix in the PHY poweroff path, which is only used in
  failure paths.

  The rest is all strictly cleanup that should make host bridge drivers
  more readable, but shouldn't actually change any behavior.

  Summary:

   - use local struct device pointers in many host bridge drivers for
     clarity

   - remove unused platform data

   - use generic DesignWare accessors

   - misc cleanups: remove redundant structure entries and re-order
     structure members to put comon generic fields first etc"

* tag 'pci-v4.9-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits)
  MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver
  MAINTAINERS: Add DT binding to the Aardvark PCIe driver maintainer
  PCI: rockchip: Indent "if" statement body
  PCI: hisi: Reorder struct hisi_pcie
  PCI: hisi: Pass device-specific struct to internal functions
  PCI: hisi: Include register block base in PCIE_SYS_STATE4 address
  PCI: dra7xx: Reorder struct dra7xx_pcie
  PCI: xilinx-nwl: Remove unused platform data
  PCI: xilinx-nwl: Add local struct device pointers
  PCI: xilinx: Removed unused xilinx_pcie_assign_msi() argument
  PCI: xilinx: Remove unused platform data
  PCI: xilinx: Add local struct device pointers
  PCI: xgene: Add register accessors
  PCI: xgene: Pass struct xgene_pcie_port to setup functions
  PCI: xgene: Remove unused platform data
  PCI: tegra: Remove unused platform data
  PCI: tegra: Add local struct device pointers
  PCI: tegra: Fix argument order in tegra_pcie_phy_disable()
  PCI: rockchip: Remove unused platform data
  PCI: rcar-gen2: Add local struct device pointers
  ...

Merge tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform drivers updates from Darren Hart:
 "Cleanups, refactoring, and a couple bug fixes.

  intel_pmc_core:
   - avoid boot time warning for !CONFIG_DEBUGFS_FS

  intel_pmc_ipc:
   - Convert to use platform_device_register_full

  asus-wmi:
   - Filter buggy scan codes on ASUS Q500A

  toshiba_bluetooth:
   - Decouple an error checking status code

  toshiba_haps:
   - Change logging level from info to debug
   - Split ACPI and HDD protection error handling

  asus-laptop:
   - get rid of parse_arg()

  asus-wmi:
   - fix asus ux303ub brightness issue

  toshiba_acpi:
   - Fix typo in *_cooling_method_set function
   - Change error checking logic from TCI functions
   - Clean up variable declaration"

* tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform/x86: intel_pmc_core: avoid boot time warning for !CONFIG_DEBUGFS_FS
  platform/x86: intel_pmc_ipc: Convert to use platform_device_register_full
  platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A
  platform/x86: toshiba_bluetooth: Decouple an error checking status code
  platform/x86: toshiba_haps: Change logging level from info to debug
  platform/x86: toshiba_haps: Split ACPI and HDD protection error handling
  platform/x86: asus-laptop: get rid of parse_arg()
  platform/x86: asus-wmi: fix asus ux303ub brightness issue
  platform/x86: toshiba_acpi: Fix typo in *_cooling_method_set function
  platform/x86: toshiba_acpi: Change error checking logic from TCI functions
  platform/x86: toshiba_acpi: Clean up variable declaration

Pull watchdog updates from Wim Van Sebroeck:

 - a new watchdog pretimeout governor framework

 - support to upload the firmware on the ziirave_wdt

 - several fixes and cleanups

* git://www.linux-watchdog.org/linux-watchdog: (26 commits)
  watchdog: imx2_wdt: add pretimeout function support
  watchdog: softdog: implement pretimeout support
  watchdog: pretimeout: add pretimeout_available_governors attribute
  watchdog: pretimeout: add option to select a pretimeout governor in runtime
  watchdog: pretimeout: add panic pretimeout governor
  watchdog: pretimeout: add noop pretimeout governor
  watchdog: add watchdog pretimeout governor framework
  watchdog: hpwdt: add support for iLO5
  fs: compat_ioctl: add pretimeout functions for watchdogs
  watchdog: add pretimeout support to the core
  watchdog: imx2_wdt: use preferred BIT macro instead of open coded values
  watchdog: st_wdt: Remove support for obsolete platforms
  watchdog: bindings: Remove obsolete platforms from dt doc.
  watchdog: mt7621_wdt: Remove assignment of dev pointer
  watchdog: rt2880_wdt: Remove assignment of dev pointer
  watchdog: constify watchdog_ops structures
  watchdog: tegra: constify watchdog_ops structures
  watchdog: iTCO_wdt: constify iTCO_wdt_pm structure
  watchdog: cadence_wdt: Fix the suspend resume
  watchdog: txx9wdt: Add missing clock (un)prepare calls for CCF
  ...

When I added the multicast flood control flag, I also added an attribute
for it for sysfs similar to other flags, but I forgot to add it to
brport_attrs.

Fixes: b6cb5ac8 ("net: bridge: add per-port multicast flood flag")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dev parameter passed to __axienet_device_reset() is not used inside
the function, so remove it.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is supposed to loop 1000 times and then give up.  The problem is
it's a post-op and after the loop we test if "loop" is zero when really
it would be -1.  Fix this by making it a pre-op.

Fixes: 1b7c55c4 ("liquidio: CN23XX queue manipulation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>