- 24 Apr, 2008 40 commits
-
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
We currently do not have a method to enable instance staring if i2c adapter is NULL, in the cases of dvb demods that write to the tuner directly using calc_regs. Prevent possible wrong instance sharing for these cases until a better solution can be found. Signed-off-by:
-
Guennadi Liakhovetski authored
flags used for spinlocks don't need to be initialized, except where the compiler has no way to see, that the spin_unlock_irqrestore is only called if the spin_lock_irqsave has been called before. Local variable initialization doesn't have to be protected. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Reviewed-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Roel Kluin <12o3l@tiscali.nl>: in drivers/media/radio/radio-sf16fmr2.c:319: for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) { if ((fmr2->card_type != 11) && V4L2_CID_AUDIO_VOLUME) radio_qctrl[i].step = 65535; ... I don't understand this '&& V4L2_CID_AUDIO_VOLUME' While fixing this issue, I've revisited the volume control code and fixed CodingStyle on the changed procedures. Signed-off-by: -
Guennadi Liakhovetski authored
Make the dev member of the struct videobuf_queue of type "struct device *" to avoid future problems. Also change the prototype of the videobuf_queue_core_init() function. Signed-off-by:
-
Mauro Carvalho Chehab authored
tuner-xc2028 needs to know when a DVB module is sharing the same analog tuner. This is done by comparing a magic number that needs to be the same on analog and on digital. To make easier, this magic number is a pointer to some data struct. With the previous code, two different pointers were using, causing a miss-detection. Signed-off-by: -
Guennadi Liakhovetski authored
The dev element of the struct videobuf_queue is now of type struct device implicitly. Fix left-over casts. Signed-off-by:
-
Roel Kluin authored
logical-bitwise & confusion Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
This board works only with non-mts firmware Signed-off-by: -
Mauro Carvalho Chehab authored
TV reception ok. S-video and Composite not tested. Audio not tested. IR not implemented yet. Signed-off-by: -
Andrew Morton authored
Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> CC: Guennadi Liakhovetski <kernel@pengutronix.de> Signed-off-by:
-
Mauro Lacy authored
Signed-off-by:
Mauro Lacy <mauro@lacy.com.ar> Signed-off-by:
-
Ernesto Hernández-Novich authored
I have what looks like a Geovision GV-600 (or 650) card. It has a large chip in the middle labeled CONEXANT FUSION 878A 25878-13 E345881.1 0312 TAIWAN It has an audio connector coming out from a chip labeled ATMEL 0242 AT89C2051-24PI It is identified as follows on my Debian GNU/Linux Etch (kernel 2.6.18) ... 01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 01:0a.0 0400: 109e:036e (rev 11) Subsystem: 008a:763c Flags: bus master, medium devsel, latency 64, IRQ 58 Memory at dfffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 01:0a.1 0480: 109e:0878 (rev 11) Subsystem: 008a:763c Flags: bus master, medium devsel, latency 64, IRQ 58 Memory at dffff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 It was being detected as a GENERIC UNKNOWN CARD both by the 2.6.18 kernel and the latest v4l-dvb drivers, but it did not work at all. The card has sixteen (16) BNC video inputs, four of them on the board itself and twelve on three daughter-cards. It has a single bt878 chip, no tuner and what looks like and audio input. After doing some research I managed to get only eight channels working by forcing card=125 and those DID NOT match channels 0-7 on the card, and no audio. Based on what was working for card=125, I added the card definition block, added a specific muxsel routine and got the card working fully with xawtv, where the sixteen channels show up as Composite0 to Composite15, matching the channel labels in the card and daughter-cards. I have made no efforts yet to get audio working, but would appreciate any pointers. Signed-off-by:Ernesto Hernández-Novich <emhn@usb.ve> Signed-off-by:
-
Marcin Slusarz authored
poll_one allocated on stack struct poll_wqueues which is pretty big structure (>500 bytes on x86_64). v4l1_compat_sync invokes poll_one in a loop, so allocate struct poll_wqueues in v4l1_compat_sync (with kmalloc) and pass it to poll_one. Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by:
-
Marcin Slusarz authored
v4l_compat_translate_ioctl used 1376 bytes of stack (x86_64), so split this 800 lines long function into ~20 small noinline functions; the biggest function takes now 712 bytes (v4l1_compat_sync) fix VIDIOCSWIN handler which printked wrong errors Signed-off-by:
-
Marcin Slusarz authored
fix most coding style violations found by checkpatch Signed-off-by:
-
Michael Krufky authored
simple_dvb_configure returns the actual tuned frequency to its caller, so it must be declared as a u32 rather than an int. As a result, we will return 0 to indicate a failure. Signed-off-by:
-
Michael Krufky authored
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by:
-
Michael Krufky authored
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by:
-
Michael Krufky authored
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by:
-
Michael Krufky authored
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by:
-
Michael Krufky authored
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by:
-
Michael Krufky authored
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by:
-
Michael Krufky authored
taken from dvb-pll Signed-off-by:
-
Michael Krufky authored
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by:
-
Michael Krufky authored
Enable digital tuning support within tuner-simple. This will allow for a single tuner module to manage the hardware, without having dvb-pll loaded. Signed-off-by:
-
Michael Krufky authored
if (priv->i2c_props.adap == NULL) then exit any function that would send commands over the i2c bus. We allow drivers to attach without an i2c adapter for cases where the dvb demod accesses the tuner directly via calc_regs. Signed-off-by:
-
Michael Krufky authored
Add entry points used for digital tuning via the dvb_frontend. Share state data between multiple instances of the driver for hybrid tuners. Signed-off-by:
-
Michael Krufky authored
Convert tda9887 to use the new hybrid_tuner_request_state and hybrid_tuner_release_state macros to manage state sharing between hybrid tuner instances. Some ATSC/DVB cards need to put the analog demodulator into standby before tuning digital. This patch allows us to attach the tda9887 driver to the digital side of the bridge driver and be able to put it into standby without jeopardizing the analog demod driver's state. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
The 6.5 MHz carrier was interpreted as SECAM-L even if SECAM-D/K was selected. Signed-off-by:
-
Hans Verkuil authored
Fsc 3.58 refers to Combination PAL-N (aka PAL-Nc), not to plain PAL-N (that uses Fsc 4.43). Signed-off-by:
-
Hans Verkuil authored
There are two tuner types: those for M/N standards and those for all others. However, M/N standards are not always 60 Hz (PAL-N/Nc are 50 Hz), so rename the module option accordingly. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Allow options like pal=bgh, improve description of those options. Add tunerhz option: 50=card has 50Hz tuner, 60=card has 60Hz tuner. Signed-off-by:
-
Hans Verkuil authored
The q_io queue was never taken into account by the poll function. Thanks to Andy Walls for finding this bug. Signed-off-by:
-
