- 26 Feb, 2017 3 commits
-
-
Omar Sandoval authored
commit 87c279e6 upstream. Commit 0809e3ac ("block: fix plug list flushing for nomerge queues") updated blk_mq_make_request() to set request_count even when blk_queue_nomerges() returns true. However, blk_mq_make_request() only does limited plugging and doesn't use request_count; blk_sq_make_request() is the one that should have been fixed. Do that and get rid of the unnecessary work in the mq version. Fixes: 0809e3ac ("block: fix plug list flushing for nomerge queues") Signed-off-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Ming Lei <tom.leiming@gmail.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
commit 2b2f5ff0 upstream. This patch fixes a RTC wakealarm issue, namely, the event fires during hibernate and is not cleared from the list, causing hwclock to block. The current enqueuing does not trigger an alarm if any expired timers already exist on the timerqueue. This can occur when a RTC wake alarm is used to wake a machine out of hibernate and the resumed state has old expired timers that have not been removed from the timer queue. This fix skips over any expired timers and triggers an alarm if there are no pending timers on the timerqueue. Note that the skipped expired timer will get reaped later on, so there is no need to clean it up immediately. The issue can be reproduced by putting a machine into hibernate and waking it with the RTC wakealarm. Running the example RTC test program from tools/testing/selftests/timers/rtctest.c after the hibernate will block indefinitely. With the fix, it no longer blocks after the hibernate resume. BugLink: http://bugs.launchpad.net/bugs/1333569Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Larry Finger authored
commit 60f59ce0 upstream. These drivers need to be able to reference "struct ieee80211_hw" from the driver's private data, and vice versa. The USB driver failed to store the address of ieee80211_hw in the private data. Although this bug has been present for a long time, it was not exposed until commit ba9f93f8 ("rtlwifi: Fix enter/exit power_save"). Fixes: ba9f93f8 ("rtlwifi: Fix enter/exit power_save") Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
- 23 Feb, 2017 16 commits
-
-
Greg Kroah-Hartman authored
-
Anssi Hannula authored
commit 3d4ef329 upstream. Commit 577fb131 ("mmc: rework selection of bus speed mode") refactored bus width selection code to mmc_select_bus_width(). However, it also altered the behavior to not call the selection code in non-high-speed modes anymore. This causes 1-bit mode to always be used when the high-speed mode is not enabled, even though 4-bit and 8-bit bus are valid bus widths in the backwards-compatibility (legacy) mode as well (see e.g. 5.3.2 Bus Speed Modes in JEDEC 84-B50). This results in a significant regression in transfer speeds. Fix the code to allow 4-bit and 8-bit widths even without high-speed mode, as before. Tested with a Zynq-7000 PicoZed 7020 board. Fixes: 577fb131 ("mmc: rework selection of bus speed mode") Signed-off-by:
Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> [anssi.hannula@bitwise.fi: backported for the different err variable check on v4.4 and tested] Signed-off-by:
-
Kent Overstreet authored
commit be628be0 upstream. Signed-off-by:
Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by:
-
Thomas VanSelus authored
commit 8fcd0950 upstream. Fix typo causing ntb_transport_create_queue to select the first queue every time, instead of using the next free queue. Signed-off-by:
Thomas VanSelus <tvanselus@xes-inc.com> Signed-off-by:
Aaron Sierra <asierra@xes-inc.com> Acked-by:
Allen Hubbe <Allen.Hubbe@dell.com> Fixes: fce8a7bb ("PCI-Express Non-Transparent Bridge Support") Signed-off-by:
Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Allen Hubbe authored
commit dd62245e upstream. The call to debugfs_remove_recursive(qp->debugfs_dir) of the sub-level directory must not be later than debugfs_remove_recursive(nt_debugfs_dir) of the top-level directory. Otherwise, the sub-level directory will not exist, and it would be invalid (panic) to attempt to remove it. This removes the top-level directory last, after sub-level directories have been cleaned up. Signed-off-by:
-
Sergey Senozhatsky authored
commit fc98c3c8 upstream. Use rcuidle console tracepoint because, apparently, it may be issued from an idle CPU: hw-breakpoint: Failed to enable monitor mode on CPU 0. hw-breakpoint: CPU 0 failed to disable vector catch =============================== [ ERR: suspicious RCU usage. ] 4.10.0-rc8-next-20170215+ #119 Not tainted ------------------------------- ./include/trace/events/printk.h:32 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 2, debug_locks = 0 RCU used illegally from extended quiescent state! 2 locks held by swapper/0/0: #0: (cpu_pm_notifier_lock){......}, at: [<c0237e2c>] cpu_pm_exit+0x10/0x54 #1: (console_lock){+.+.+.}, at: [<c01ab350>] vprintk_emit+0x264/0x474 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc8-next-20170215+ #119 Hardware name: Generic OMAP4 (Flattened Device Tree) console_unlock vprintk_emit vprintk_default printk reset_ctrl_regs dbg_cpu_pm_notify notifier_call_chain cpu_pm_exit omap_enter_idle_coupled cpuidle_enter_state cpuidle_enter_state_coupled do_idle cpu_startup_entry start_kernel This RCU warning, however, is suppressed by lockdep_off() in printk(). lockdep_off() increments the ->lockdep_recursion counter and thus disables RCU_LOCKDEP_WARN() and debug_lockdep_rcu_enabled(), which want lockdep to be enabled "current->lockdep_recursion == 0". Link: http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.comSigned-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by:
Tony Lindgren <tony@atomide.com> Tested-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <rmk@armlinux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Kees Cook authored
commit 9e344048 upstream. The 64-bit get_user() wasn't clearing the high word due to a typo in the error handler. The exception handler entry was already correct, though. Noticed during recent usercopy test additions in lib/test_user_copy.c. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Yang Yang authored
commit 25f71d1c upstream. The UEVENT user mode helper is enabled before the initcalls are executed and is available when the root filesystem has been mounted. The user mode helper is triggered by device init calls and the executable might use the futex syscall. futex_init() is marked __initcall which maps to device_initcall, but there is no guarantee that futex_init() is invoked _before_ the first device init call which triggers the UEVENT user mode helper. If the user mode helper uses the futex syscall before futex_init() then the syscall crashes with a NULL pointer dereference because the futex subsystem has not been initialized yet. Move futex_init() to core_initcall so futexes are initialized before the root filesystem is mounted and the usermode helper becomes available. [ tglx: Rewrote changelog ] Signed-off-by:
Yang Yang <yang.yang29@zte.com.cn> Cc: jiang.biao2@zte.com.cn Cc: jiang.zhengxiong@zte.com.cn Cc: zhong.weidong@zte.com.cn Cc: deng.huali@zte.com.cn Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1483085875-6130-1-git-send-email-yang.yang29@zte.com.cnSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Pierre-Louis Bossart authored
commit bb08c04d upstream. 100% reproducible issue found on SKL SkullCanyon NUC with two external DP daisy-chained monitors in DP/MST mode. When turning off or changing the input of the second monitor the machine stops with a kernel oops. This issue happened with 4.8.8 as well as drm/drm-intel-nightly. This issue is traced to an inconsistent control flow in drm_dp_update_payload_part1(): the 'port' pointer is set to NULL at the same time as 'req_payload.num_slots' is set to zero, but the pointer is dereferenced even when req_payload.num_slot is zero. The problematic dereference was introduced in commit dfda0df3 ("drm/mst: rework payload table allocation to conform better") and may impact all versions since v3.18 The fix suggested by Chris Wilson removes the kernel oops and was found to work well after 10mn of monkey-testing with the second monitor power and input buttons Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98990 Fixes: dfda0df3 ("drm/mst: rework payload table allocation to conform better.") Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Tested-by:
Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487076561-2169-1-git-send-email-jani.nikula@intel.comSigned-off-by:
-
Michel Dänzer authored
commit d74c67dd upstream. The crtc_h/vdisplay fields may not match the CRTC viewport dimensions with special modes such as interlaced ones. Fixes the HW cursor disappearing in the bottom half of the screen with interlaced modes. Fixes: 6b16cf77 ("drm/radeon: Hide the HW cursor while it's out of bounds") Reported-by:
Ashutosh Kumar <ashutosh.kumar@amd.com> Tested-by:
Sonny Jiang <sonny.jiang@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
IHARA Hiroka authored
commit 722c5ac7 upstream. ELAN0605 has been confirmed to be a variant of ELAN0600, which is blacklisted in the hid-core to be managed by elan_i2c. This device can be found in Lenovo ideapad 310s (80U4000). Signed-off-by:
Hiroka IHARA <ihara_h@live.jp> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Al Viro authored
commit 137d01df upstream. What happens is that a write to /dev/sg is given a request with non-zero ->iovec_count combined with zero ->dxfer_len. Or with ->dxferp pointing to an array full of empty iovecs. Having write permission to /dev/sg shouldn't be equivalent to the ability to trigger BUG_ON() while holding spinlocks... Found by Dmitry Vyukov and syzkaller. [ The BUG_ON() got changed to a WARN_ON_ONCE(), but this fixes the underlying issue. - Linus ] Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Johannes Thumshirn authored
commit fd3fc0b4 upstream. Don't crash the machine just because of an empty transfer. Use WARN_ON() combined with returning an error. Found by Dmitry Vyukov and syzkaller. [ Changed to "WARN_ON_ONCE()". Al has a patch that should fix the root cause, but a BUG_ON() is not acceptable in any case, and a WARN_ON() might still be a cause of excessive log spamming. NOTE! If this warning ever triggers, we may end up leaking resources, since this doesn't bother to try to clean the command up. So this WARN_ON_ONCE() triggering does imply real problems. But BUG_ON() is much worse. People really need to stop using BUG_ON() for "this shouldn't ever happen". It makes pretty much any bug worse. - Linus ] Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reported-by:
-
Sahitya Tummala authored
commit 6ba4d272 upstream. There is a potential race between fuse_dev_do_write() and request_wait_answer() contexts as shown below: TASK 1: __fuse_request_send(): |--spin_lock(&fiq->waitq.lock); |--queue_request(); |--spin_unlock(&fiq->waitq.lock); |--request_wait_answer(): |--if (test_bit(FR_SENT, &req->flags)) <gets pre-empted after it is validated true> TASK 2: fuse_dev_do_write(): |--clears bit FR_SENT, |--request_end(): |--sets bit FR_FINISHED |--spin_lock(&fiq->waitq.lock); |--list_del_init(&req->intr_entry); |--spin_unlock(&fiq->waitq.lock); |--fuse_put_request(); |--queue_interrupt(); <request gets queued to interrupts list> |--wake_up_locked(&fiq->waitq); |--wait_event_freezable(); <as FR_FINISHED is set, it returns and then the caller frees this request> Now, the next fuse_dev_do_read(), see interrupts list is not empty and then calls fuse_read_interrupt() which tries to access the request which is already free'd and gets the below crash: [11432.401266] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b6b ... [11432.418518] Kernel BUG at ffffff80083720e0 [11432.456168] PC is at __list_del_entry+0x6c/0xc4 [11432.463573] LR is at fuse_dev_do_read+0x1ac/0x474 ... [11432.679999] [<ffffff80083720e0>] __list_del_entry+0x6c/0xc4 [11432.687794] [<ffffff80082c65e0>] fuse_dev_do_read+0x1ac/0x474 [11432.693180] [<ffffff80082c6b14>] fuse_dev_read+0x6c/0x78 [11432.699082] [<ffffff80081d5638>] __vfs_read+0xc0/0xe8 [11432.704459] [<ffffff80081d5efc>] vfs_read+0x90/0x108 [11432.709406] [<ffffff80081d67f0>] SyS_read+0x58/0x94 As FR_FINISHED bit is set before deleting the intr_entry with input queue lock in request completion path, do the testing of this flag and queueing atomically with the same lock in queue_interrupt(). Signed-off-by:
Sahitya Tummala <stummala@codeaurora.org> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: fd22d62e ("fuse: no fc->lock for iqueue parts") Signed-off-by:
-
Mauro Carvalho Chehab authored
commit f9c85ee6 upstream. Reported as a Kaffeine bug: https://bugs.kde.org/show_bug.cgi?id=375811 The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. On Kernel 4.9, the default is to not accept DMA on stack anymore on x86 architecture. On other architectures, this has been a requirement since Kernel 2.2. So, after this patch, this driver should likely work fine on all archs. Tested with USB ID 2040:5510: Hauppauge Windham Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Miklos Szeredi authored
commit 5a81e6a1 upstream. Flags (PIPE_BUF_FLAG_PACKET, PIPE_BUF_FLAG_GIFT) could remain on the unused part of the pipe ring buffer. Previously splice_to_pipe() left the flags value alone, which could result in incorrect behavior. Uninitialized flags appears to have been there from the introduction of the splice syscall. Signed-off-by:
-
- 18 Feb, 2017 20 commits
-
-
Greg Kroah-Hartman authored
-
Eric Dumazet authored
[ Upstream commit 72fb96e7 ] udp_ioctl(), as its name suggests, is used by UDP protocols, but is also used by L2TP :( L2TP should use its own handler, because it really does not look the same. SIOCINQ for instance should not assume UDP checksum or headers. Thanks to Andrey and syzkaller team for providing the report and a nice reproducer. While crashes only happen on recent kernels (after commit 7c13f97f ("udp: do fwd memory scheduling on dequeue")), this probably needs to be backported to older kernels. Fixes: 7c13f97f ("udp: do fwd memory scheduling on dequeue") Fixes: 85584672 ("udp: Fix udp_poll() and ioctl()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 73d2c667 ] Andrey reported a kernel crash: general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 2 PID: 3880 Comm: syz-executor1 Not tainted 4.10.0-rc6+ #124 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880060048040 task.stack: ffff880069be8000 RIP: 0010:ping_v4_push_pending_frames net/ipv4/ping.c:647 [inline] RIP: 0010:ping_v4_sendmsg+0x1acd/0x23f0 net/ipv4/ping.c:837 RSP: 0018:ffff880069bef8b8 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff880069befb90 RCX: 0000000000000000 RDX: 0000000000000018 RSI: ffff880069befa30 RDI: 00000000000000c2 RBP: ffff880069befbb8 R08: 0000000000000008 R09: 0000000000000000 R10: 0000000000000002 R11: 0000000000000000 R12: ffff880069befab0 R13: ffff88006c624a80 R14: ffff880069befa70 R15: 0000000000000000 FS: 00007f6f7c716700(0000) GS:ffff88006de00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004a6f28 CR3: 000000003a134000 CR4: 00000000000006e0 Call Trace: inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744 sock_sendmsg_nosec net/socket.c:635 [inline] sock_sendmsg+0xca/0x110 net/socket.c:645 SYSC_sendto+0x660/0x810 net/socket.c:1687 SyS_sendto+0x40/0x50 net/socket.c:1655 entry_SYSCALL_64_fastpath+0x1f/0xc2 This is because we miss a check for NULL pointer for skb_peek() when the queue is empty. Other places already have the same check. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 57031eb7 ] Link layer protocols may unconditionally pull headers, as Ethernet does in eth_type_trans. Ensure that the entire link layer header always lies in the skb linear segment. tpacket_snd has such a check. Extend this to packet_snd. Variable length link layer headers complicate the computation somewhat. Here skb->len may be smaller than dev->hard_header_len. Round up the linear length to be at least as long as the smallest of the two. Reported-by:
Willem de Bruijn <willemb@google.com> Acked-by:
-
Willem de Bruijn authored
[ Upstream commit 217e6fa2 ] The stack must not pass packets to device drivers that are shorter than the minimum link layer header length. Previously, packet sockets would drop packets smaller than or equal to dev->hard_header_len, but this has false positives. Zero length payload is used over Ethernet. Other link layer protocols support variable length headers. Support for validation of these protocols removed the min length check for all protocols. Introduce an explicit dev->min_header_len parameter and drop all packets below this value. Initially, set it to non-zero only for Ethernet and loopback. Other protocols can follow in a patch to net-next. Fixes: 9ed988cd ("packet: validate variable length ll headers") Reported-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit d7426c69 ] Dmitry reported a double free in sit_init_net(): kernel BUG at mm/percpu.c:689! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 15692 Comm: syz-executor1 Not tainted 4.10.0-rc6-next-20170206 #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801c9cc27c0 task.stack: ffff88017d1d8000 RIP: 0010:pcpu_free_area+0x68b/0x810 mm/percpu.c:689 RSP: 0018:ffff88017d1df488 EFLAGS: 00010046 RAX: 0000000000010000 RBX: 00000000000007c0 RCX: ffffc90002829000 RDX: 0000000000010000 RSI: ffffffff81940efb RDI: ffff8801db841d94 RBP: ffff88017d1df590 R08: dffffc0000000000 R09: 1ffffffff0bb3bdd R10: dffffc0000000000 R11: 00000000000135dd R12: ffff8801db841d80 R13: 0000000000038e40 R14: 00000000000007c0 R15: 00000000000007c0 FS: 00007f6ea608f700(0000) GS:ffff8801dbe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000aff8 CR3: 00000001c8d44000 CR4: 00000000001426f0 DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: free_percpu+0x212/0x520 mm/percpu.c:1264 ipip6_dev_free+0x43/0x60 net/ipv6/sit.c:1335 sit_init_net+0x3cb/0xa10 net/ipv6/sit.c:1831 ops_init+0x10a/0x530 net/core/net_namespace.c:115 setup_net+0x2ed/0x690 net/core/net_namespace.c:291 copy_net_ns+0x26c/0x530 net/core/net_namespace.c:396 create_new_namespaces+0x409/0x860 kernel/nsproxy.c:106 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205 SYSC_unshare kernel/fork.c:2281 [inline] SyS_unshare+0x64e/0xfc0 kernel/fork.c:2231 entry_SYSCALL_64_fastpath+0x1f/0xc2 This is because when tunnel->dst_cache init fails, we free dev->tstats once in ipip6_tunnel_init() and twice in sit_init_net(). This looks redundant but its ndo_uinit() does not seem enough to clean up everything here. So avoid this by setting dev->tstats to NULL after the first free, at least for -net. Reported-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit 2dcab598 ] Alexander Popov reported that an application may trigger a BUG_ON in sctp_wait_for_sndbuf if the socket tx buffer is full, a thread is waiting on it to queue more data and meanwhile another thread peels off the association being used by the first thread. This patch replaces the BUG_ON call with a proper error handling. It will return -EPIPE to the original sendmsg call, similarly to what would have been done if the association wasn't found in the first place. Acked-by:
Alexander Popov <alex.popov@linux.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Benjamin Poirier authored
[ Upstream commit bd4ce941 ] mlx4 may schedule napi from a workqueue. Afterwards, softirqs are not run in a deterministic time frame and the following message may be logged: NOHZ: local_softirq_pending 08 The problem is the same as what was described in commit ec13ee80 ("virtio_net: invoke softirqs after __napi_schedule") and this patch applies the same fix to mlx4. Fixes: 07841f9d ("net/mlx4_en: Schedule napi when RX buffers allocation fails") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Acked-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 837585a5 ] When IFF_VNET_HDR is enabled, a virtio_net header must precede data. Data length is verified to be greater than or equal to expected header length tun->vnet_hdr_sz before copying. Macvtap functions read the value once, but unless READ_ONCE is used, the compiler may ignore this and read multiple times. Enforce a single read and locally cached value to avoid updates between test and use. Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit e1edab87 ] When IFF_VNET_HDR is enabled, a virtio_net header must precede data. Data length is verified to be greater than or equal to expected header length tun->vnet_hdr_sz before copying. Read this value once and cache locally, as it can be updated between the test and use (TOCTOU). Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit ccf7abb9 ] Splicing from TCP socket is vulnerable when a packet with URG flag is received and stored into receive queue. __tcp_splice_read() returns 0, and sk_wait_data() immediately returns since there is the problematic skb in queue. This is a nice way to burn cpu (aka infinite loop) and trigger soft lockups. Again, this gem was found by syzkaller tool. Fixes: 9c55e01c ("[TCP]: Splice receive support.") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit ebf6c9cb ] Dmitry reported use-after-free in ip6_datagram_recv_specific_ctl() A similar bug was fixed in commit 8ce48623 ("ipv6: tcp: restore IP6CB for pktoptions skbs"), but I missed another spot. tcp_v6_syn_recv_sock() can indeed set np->pktoptions from ireq->pktopts Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 7892032c ] Andrey Konovalov reported out of bound accesses in ip6gre_err() If GRE flags contains GRE_KEY, the following expression *(((__be32 *)p) + (grehlen / 4) - 1) accesses data ~40 bytes after the expected point, since grehlen includes the size of IPv6 headers. Let's use a "struct gre_base_hdr *greh" pointer to make this code more readable. p[1] becomes greh->protocol. grhlen is the GRE header length. Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d71b7896 ] syzkaller found another out of bound access in ip_options_compile(), or more exactly in cipso_v4_validate() Fixes: 20e2a864 ("cipso: handle CIPSO options correctly when NetLabel is disabled") Fixes: 446fda4f ("[NetLabel]: CIPSOv4 engine") Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 34b2cef2 ] Andrey Konovalov got crashes in __ip_options_echo() when a NULL skb->dst is accessed. ipv4_pktinfo_prepare() should not drop the dst if (evil) IP options are present. We could refine the test to the presence of ts_needtime or srr, but IP options are not often used, so let's be conservative. Thanks to syzkaller team for finding this bug. Fixes: d826eb14 ("ipv4: PKTINFO doesnt need dst reference") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 5fa8bbda ] Dmitry reported a warning [1] showing that we were calling net_disable_timestamp() -> static_key_slow_dec() from a non process context. Grabbing a mutex while holding a spinlock or rcu_read_lock() is not allowed. As Cong suggested, we now use a work queue. It is possible netstamp_clear() exits while netstamp_needed_deferred is not zero, but it is probably not worth trying to do better than that. netstamp_needed_deferred atomic tracks the exact number of deferred decrements. [1] [ INFO: suspicious RCU usage. ] 4.10.0-rc5+ #192 Not tainted ------------------------------- ./include/linux/rcupdate.h:561 Illegal context switch in RCU read-side critical section! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 0 2 locks held by syz-executor14/23111: #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff83a35c35>] lock_sock include/net/sock.h:1454 [inline] #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff83a35c35>] rawv6_sendmsg+0x1e65/0x3ec0 net/ipv6/raw.c:919 #1: (rcu_read_lock){......}, at: [<ffffffff83ae2678>] nf_hook include/linux/netfilter.h:201 [inline] #1: (rcu_read_lock){......}, at: [<ffffffff83ae2678>] __ip6_local_out+0x258/0x840 net/ipv6/output_core.c:160 stack backtrace: CPU: 2 PID: 23111 Comm: syz-executor14 Not tainted 4.10.0-rc5+ #192 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4452 rcu_preempt_sleep_check include/linux/rcupdate.h:560 [inline] ___might_sleep+0x560/0x650 kernel/sched/core.c:7748 __might_sleep+0x95/0x1a0 kernel/sched/core.c:7739 mutex_lock_nested+0x24f/0x1730 kernel/locking/mutex.c:752 atomic_dec_and_mutex_lock+0x119/0x160 kernel/locking/mutex.c:1060 __static_key_slow_dec+0x7a/0x1e0 kernel/jump_label.c:149 static_key_slow_dec+0x51/0x90 kernel/jump_label.c:174 net_disable_timestamp+0x3b/0x50 net/core/dev.c:1728 sock_disable_timestamp+0x98/0xc0 net/core/sock.c:403 __sk_destruct+0x27d/0x6b0 net/core/sock.c:1441 sk_destruct+0x47/0x80 net/core/sock.c:1460 __sk_free+0x57/0x230 net/core/sock.c:1468 sock_wfree+0xae/0x120 net/core/sock.c:1645 skb_release_head_state+0xfc/0x200 net/core/skbuff.c:655 skb_release_all+0x15/0x60 net/core/skbuff.c:668 __kfree_skb+0x15/0x20 net/core/skbuff.c:684 kfree_skb+0x16e/0x4c0 net/core/skbuff.c:705 inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304 inet_frag_put include/net/inet_frag.h:133 [inline] nf_ct_frag6_gather+0x1106/0x3840 net/ipv6/netfilter/nf_conntrack_reasm.c:617 ipv6_defrag+0x1be/0x2b0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68 nf_hook_entry_hookfn include/linux/netfilter.h:102 [inline] nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310 nf_hook include/linux/netfilter.h:212 [inline] __ip6_local_out+0x489/0x840 net/ipv6/output_core.c:160 ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170 ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722 ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742 rawv6_push_pending_frames net/ipv6/raw.c:613 [inline] rawv6_sendmsg+0x2d1a/0x3ec0 net/ipv6/raw.c:927 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744 sock_sendmsg_nosec net/socket.c:635 [inline] sock_sendmsg+0xca/0x110 net/socket.c:645 sock_write_iter+0x326/0x600 net/socket.c:848 do_iter_readv_writev+0x2e3/0x5b0 fs/read_write.c:695 do_readv_writev+0x42c/0x9b0 fs/read_write.c:872 vfs_writev+0x87/0xc0 fs/read_write.c:911 do_writev+0x110/0x2c0 fs/read_write.c:944 SYSC_writev fs/read_write.c:1017 [inline] SyS_writev+0x27/0x30 fs/read_write.c:1014 entry_SYSCALL_64_fastpath+0x1f/0xc2 RIP: 0033:0x445559 RSP: 002b:00007f6f46fceb58 EFLAGS: 00000292 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000445559 RDX: 0000000000000001 RSI: 0000000020f1eff0 RDI: 0000000000000005 RBP: 00000000006e19c0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000292 R12: 0000000000700000 R13: 0000000020f59000 R14: 0000000000000015 R15: 0000000000020400 BUG: sleeping function called from invalid context at kernel/locking/mutex.c:752 in_atomic(): 1, irqs_disabled(): 0, pid: 23111, name: syz-executor14 INFO: lockdep is turned off. CPU: 2 PID: 23111 Comm: syz-executor14 Not tainted 4.10.0-rc5+ #192 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 ___might_sleep+0x47e/0x650 kernel/sched/core.c:7780 __might_sleep+0x95/0x1a0 kernel/sched/core.c:7739 mutex_lock_nested+0x24f/0x1730 kernel/locking/mutex.c:752 atomic_dec_and_mutex_lock+0x119/0x160 kernel/locking/mutex.c:1060 __static_key_slow_dec+0x7a/0x1e0 kernel/jump_label.c:149 static_key_slow_dec+0x51/0x90 kernel/jump_label.c:174 net_disable_timestamp+0x3b/0x50 net/core/dev.c:1728 sock_disable_timestamp+0x98/0xc0 net/core/sock.c:403 __sk_destruct+0x27d/0x6b0 net/core/sock.c:1441 sk_destruct+0x47/0x80 net/core/sock.c:1460 __sk_free+0x57/0x230 net/core/sock.c:1468 sock_wfree+0xae/0x120 net/core/sock.c:1645 skb_release_head_state+0xfc/0x200 net/core/skbuff.c:655 skb_release_all+0x15/0x60 net/core/skbuff.c:668 __kfree_skb+0x15/0x20 net/core/skbuff.c:684 kfree_skb+0x16e/0x4c0 net/core/skbuff.c:705 inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304 inet_frag_put include/net/inet_frag.h:133 [inline] nf_ct_frag6_gather+0x1106/0x3840 net/ipv6/netfilter/nf_conntrack_reasm.c:617 ipv6_defrag+0x1be/0x2b0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68 nf_hook_entry_hookfn include/linux/netfilter.h:102 [inline] nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310 nf_hook include/linux/netfilter.h:212 [inline] __ip6_local_out+0x489/0x840 net/ipv6/output_core.c:160 ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170 ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722 ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742 rawv6_push_pending_frames net/ipv6/raw.c:613 [inline] rawv6_sendmsg+0x2d1a/0x3ec0 net/ipv6/raw.c:927 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744 sock_sendmsg_nosec net/socket.c:635 [inline] sock_sendmsg+0xca/0x110 net/socket.c:645 sock_write_iter+0x326/0x600 net/socket.c:848 do_iter_readv_writev+0x2e3/0x5b0 fs/read_write.c:695 do_readv_writev+0x42c/0x9b0 fs/read_write.c:872 vfs_writev+0x87/0xc0 fs/read_write.c:911 do_writev+0x110/0x2c0 fs/read_write.c:944 SYSC_writev fs/read_write.c:1017 [inline] SyS_writev+0x27/0x30 fs/read_write.c:1014 entry_SYSCALL_64_fastpath+0x1f/0xc2 RIP: 0033:0x445559 Fixes: b90e5794 ("net: dont call jump_label_dec from irq context") Suggested-by:
-
Eric Dumazet authored
[ Upstream commit 06425c30 ] syszkaller fuzzer was able to trigger a divide by zero, when TCP window scaling is not enabled. SO_RCVBUF can be used not only to increase sk_rcvbuf, also to decrease it below current receive buffers utilization. If mss is negative or 0, just return a zero TCP window. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 63117f09 ] Casting is a high precedence operation but "off" and "i" are in terms of bytes so we need to have some parenthesis here. Fixes: fbfa743a ("ipv6: fix ip6_tnl_parse_tlv_enc_lim()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Eric Dumazet authored
[ Upstream commit fbfa743a ] This function suffers from multiple issues. First one is that pskb_may_pull() may reallocate skb->head, so the 'raw' pointer needs either to be reloaded or not used at all. Second issue is that NEXTHDR_DEST handling does not validate that the options are present in skb->data, so we might read garbage or access non existent memory. With help from Willem de Bruijn. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit f1712c73 ] Zhang Yanmin reported crashes [1] and provided a patch adding a synchronize_rcu() call in can_rx_unregister() The main problem seems that the sockets themselves are not RCU protected. If CAN uses RCU for delivery, then sockets should be freed only after one RCU grace period. Recent kernels could use sock_set_flag(sk, SOCK_RCU_FREE), but let's ease stable backports with the following fix instead. [1] BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81495e25>] selinux_socket_sock_rcv_skb+0x65/0x2a0 Call Trace: <IRQ> [<ffffffff81485d8c>] security_sock_rcv_skb+0x4c/0x60 [<ffffffff81d55771>] sk_filter+0x41/0x210 [<ffffffff81d12913>] sock_queue_rcv_skb+0x53/0x3a0 [<ffffffff81f0a2b3>] raw_rcv+0x2a3/0x3c0 [<ffffffff81f06eab>] can_rcv_filter+0x12b/0x370 [<ffffffff81f07af9>] can_receive+0xd9/0x120 [<ffffffff81f07beb>] can_rcv+0xab/0x100 [<ffffffff81d362ac>] __netif_receive_skb_core+0xd8c/0x11f0 [<ffffffff81d36734>] __netif_receive_skb+0x24/0xb0 [<ffffffff81d37f67>] process_backlog+0x127/0x280 [<ffffffff81d36f7b>] net_rx_action+0x33b/0x4f0 [<ffffffff810c88d4>] __do_softirq+0x184/0x440 [<ffffffff81f9e86c>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff810c76fb>] do_softirq.part.18+0x3b/0x40 [<ffffffff810c8bed>] do_softirq+0x1d/0x20 [<ffffffff81d30085>] netif_rx_ni+0xe5/0x110 [<ffffffff8199cc87>] slcan_receive_buf+0x507/0x520 [<ffffffff8167ef7c>] flush_to_ldisc+0x21c/0x230 [<ffffffff810e3baf>] process_one_work+0x24f/0x670 [<ffffffff810e44ed>] worker_thread+0x9d/0x6f0 [<ffffffff810e4450>] ? rescuer_thread+0x480/0x480 [<ffffffff810ebafc>] kthread+0x12c/0x150 [<ffffffff81f9ccef>] ret_from_fork+0x3f/0x70 Reported-by:
Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
- 14 Feb, 2017 1 commit
-
-
Greg Kroah-Hartman authored
-
