- 05 Apr, 2023 4 commits
-
-
Andy Roulin authored
If the number of lanes was forced and then subsequently the user omits this parameter, the ksettings->lanes is reset. The driver should then reset the number of lanes to the device's default for the specified speed. However, although the ksettings->lanes is set to 0, the mod variable is not set to true to indicate the driver and userspace should be notified of the changes. The consequence is that the same ethtool operation will produce different results based on the initial state. If the initial state is: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: on then executing 'ethtool -s swp1 speed 50000 autoneg off' will yield: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: off While if the initial state is: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 1 Duplex: Full Auto-negotiation: off executing the same 'ethtool -s swp1 speed 50000 autoneg off' results in: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 1 Duplex: Full Auto-negotiation: off This patch fixes this behavior. Omitting lanes will always results in the driver choosing the default lane width for the chosen speed. In this scenario, regardless of the initial state, the end state will be, e.g., $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: off Fixes: 012ce4dd ("ethtool: Extend link modes settings uAPI with lanes") Signed-off-by:
Andy Roulin <aroulin@nvidia.com> Reviewed-by:
Danielle Ratson <danieller@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/ac238d6b-8726-8156-3810-6471291dbc7f@nvidia.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Kuniyuki Iwashima says: ==================== raw/ping: Fix locking in /proc/net/{raw,icmp}. The first patch fixes a NULL deref for /proc/net/raw and second one fixes the same issue for ping sockets. The first patch also converts hlist_nulls to hlist, but this is because the current code uses sk_nulls_for_each() for lockless readers, instead of sk_nulls_for_each_rcu() which adds memory barrier, but raw sockets does not use the nulls marker nor SLAB_TYPESAFE_BY_RCU in the first place. OTOH, the ping sockets already uses sk_nulls_for_each_rcu(), and such conversion can be posted later for net-next. ==================== Link: https://lore.kernel.org/r/20230403194959.48928-1-kuniyu@amazon.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
After commit dbca1596 ("ping: convert to RCU lookups, get rid of rwlock"), we use RCU for ping sockets, but we should use spinlock for /proc/net/icmp to avoid a potential NULL deref mentioned in the previous patch. Let's go back to using spinlock there. Note we can convert ping sockets to use hlist instead of hlist_nulls because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets. Fixes: dbca1596 ("ping: convert to RCU lookups, get rid of rwlock") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
Dae R. Jeong reported a NULL deref in raw_get_next() [0]. It seems that the repro was running these sequences in parallel so that one thread was iterating on a socket that was being freed in another netns. unshare(0x40060200) r0 = syz_open_procfs(0x0, &(0x7f0000002080)='net/raw\x00') socket$inet_icmp_raw(0x2, 0x3, 0x1) pread64(r0, &(0x7f0000000000)=""/10, 0xa, 0x10000000007f) After commit 0daf07e5 ("raw: convert raw sockets to RCU"), we use RCU and hlist_nulls_for_each_entry() to iterate over SOCK_RAW sockets. However, we should use spinlock for slow paths to avoid the NULL deref. Also, SOCK_RAW does not use SLAB_TYPESAFE_BY_RCU, and the slab object is not reused during iteration in the grace period. In fact, the lockless readers do not check the nulls marker with get_nulls_value(). So, SOCK_RAW should use hlist instead of hlist_nulls. Instead of adding an unnecessary barrier by sk_nulls_for_each_rcu(), let's convert hlist_nulls to hlist and use sk_for_each_rcu() for fast paths and sk_for_each() and spinlock for /proc/net/raw. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 2 PID: 20952 Comm: syz-executor.0 Not tainted 6.2.0-g048ec869bafd-dirty #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline] RIP: 0010:sock_net include/net/sock.h:649 [inline] RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline] RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline] RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995 Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206 RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000 RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338 RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9 R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78 R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030 FS: 00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb9614b35f CR3: 000000003c672000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> seq_read_iter+0x4c6/0x10f0 fs/seq_file.c:225 seq_read+0x224/0x320 fs/seq_file.c:162 pde_read fs/proc/inode.c:316 [inline] proc_reg_read+0x23f/0x330 fs/proc/inode.c:328 vfs_read+0x31e/0xd30 fs/read_write.c:468 ksys_pread64 fs/read_write.c:665 [inline] __do_sys_pread64 fs/read_write.c:675 [inline] __se_sys_pread64 fs/read_write.c:672 [inline] __x64_sys_pread64+0x1e9/0x280 fs/read_write.c:672 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x478d29 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f843ae8dbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000011 RAX: ffffffffffffffda RBX: 0000000000791408 RCX: 0000000000478d29 RDX: 000000000000000a RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000f477909a R08: 0000000000000000 R09: 0000000000000000 R10: 000010000000007f R11: 0000000000000246 R12: 0000000000791740 R13: 0000000000791414 R14: 0000000000791408 R15: 00007ffc2eb48a50 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline] RIP: 0010:sock_net include/net/sock.h:649 [inline] RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline] RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline] RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995 Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206 RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000 RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338 RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9 R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78 R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030 FS: 00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f92ff166000 CR3: 000000003c672000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 0daf07e5 ("raw: convert raw sockets to RCU") Reported-by:
syzbot <syzkaller@googlegroups.com> Reported-by:
Dae R. Jeong <threeearcat@gmail.com> Link: https://lore.kernel.org/netdev/ZCA2mGV_cmq7lIfV@dragonet/Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 04 Apr, 2023 2 commits
-
-
Corinna Vinschen authored
stmmac_reinit_queues() fails to fix up the RX hash. Even if the number of channels gets restricted, the output of `ethtool -x' indicates that all RX queues are used: $ ethtool -l enp0s29f2 Channel parameters for enp0s29f2: Pre-set maximums: RX: 8 TX: 8 Other: n/a Combined: n/a Current hardware settings: RX: 8 TX: 8 Other: n/a Combined: n/a $ ethtool -x enp0s29f2 RX flow hash indirection table for enp0s29f2 with 8 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 [...] $ ethtool -L enp0s29f2 rx 3 $ ethtool -x enp0s29f2 RX flow hash indirection table for enp0s29f2 with 3 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 [...] Fix this by setting the indirection table according to the number of specified queues. The result is now as expected: $ ethtool -L enp0s29f2 rx 3 $ ethtool -x enp0s29f2 RX flow hash indirection table for enp0s29f2 with 3 RX ring(s): 0: 0 1 2 0 1 2 0 1 8: 2 0 1 2 0 1 2 0 [...] Tested on Intel Elkhart Lake. Fixes: 0366f7e0 ("net: stmmac: add ethtool support for get/set channels") Signed-off-by:
Corinna Vinschen <vinschen@redhat.com> Link: https://lore.kernel.org/r/20230403121120.489138-1-vinschen@redhat.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Siddharth Vadapalli authored
In the am65_cpsw_nuss_probe() function's cleanup path, the call to of_platform_device_destroy() for the common->mdio_dev device is invoked unconditionally. It is possible that either the MDIO node is not present in the device-tree, or the MDIO node is disabled in the device-tree. In both these cases, the MDIO device is not created, resulting in a NULL pointer dereference when the of_platform_device_destroy() function is invoked on the common->mdio_dev device on the cleanup path. Fix this by ensuring that the common->mdio_dev device exists, before attempting to invoke of_platform_device_destroy(). Fixes: a45cfcc6 ("net: ethernet: ti: am65-cpsw-nuss: use of_platform_device_create() for mdio") Signed-off-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20230403090321.835877-1-s-vadapalli@ti.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
- 03 Apr, 2023 3 commits
-
-
Ziyang Xuan authored
Syzbot reported a bug as following: ===================================================== BUG: KMSAN: uninit-value in arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline] BUG: KMSAN: uninit-value in arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline] BUG: KMSAN: uninit-value in atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline] BUG: KMSAN: uninit-value in __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956 arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline] arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline] atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline] __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956 ip6_finish_skb include/net/ipv6.h:1122 [inline] ip6_push_pending_frames+0x10e/0x550 net/ipv6/ip6_output.c:1987 rawv6_push_pending_frames+0xb12/0xb90 net/ipv6/raw.c:579 rawv6_sendmsg+0x297e/0x2e60 net/ipv6/raw.c:922 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530 __sys_sendmsg net/socket.c:2559 [inline] __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988 kmalloc_reserve net/core/skbuff.c:492 [inline] __alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565 alloc_skb include/linux/skbuff.h:1270 [inline] __ip6_append_data+0x51c1/0x6bb0 net/ipv6/ip6_output.c:1684 ip6_append_data+0x411/0x580 net/ipv6/ip6_output.c:1854 rawv6_sendmsg+0x2882/0x2e60 net/ipv6/raw.c:915 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530 __sys_sendmsg net/socket.c:2559 [inline] __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because icmp6hdr does not in skb linear region under the scenario of SOCK_RAW socket. Access icmp6_hdr(skb)->icmp6_type directly will trigger the uninit variable access bug. Use a local variable icmp6_type to carry the correct value in different scenarios. Fixes: 14878f75 ("[IPV6]: Add ICMPMsgStats MIB (RFC 4293) [rev 2]") Reported-by: syzbot+8257f4dcef79de670baf@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=3d605ec1d0a7f2a269a1a6936ac7f2b85975ee9cSigned-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sricharan Ramabadhran authored
On the remote side, when QRTR socket is removed, af_qrtr will call qrtr_port_remove() which broadcasts the DEL_CLIENT packet to all neighbours including local NS. NS upon receiving the DEL_CLIENT packet, will remove the lookups associated with the node:port and broadcasts the DEL_SERVER packet. But on the host side, due to the arrival of the DEL_CLIENT packet, the NS would've already deleted the server belonging to that port. So when the remote's NS again broadcasts the DEL_SERVER for that port, it throws below error message on the host: "failed while handling packet from 2:-2" So fix this error by not broadcasting the DEL_SERVER packet when the DEL_CLIENT packet gets processed." Fixes: 0c2204a4 ("net: qrtr: Migrate nameservice to kernel from userspace") Reviewed-by:
Manivannan Sadhasivam <mani@kernel.org> Signed-off-by:
Ram Kumar Dharuman <quic_ramd@quicinc.com> Signed-off-by:
Sricharan Ramabadhran <quic_srichara@quicinc.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Golle authored
The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X, however, in their EEPROM they incorrectly specify: Transceiver type : Ethernet: 1000BASE-LX ... BR, Nominal : 2600MBd Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway. https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60Reported-by:
chowtom <chowtom@gmail.com> Tested-by:
chowtom <chowtom@gmail.com> Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 02 Apr, 2023 4 commits
-
-
Xin Long authored
This patch fixes a corner case where the asoc out stream count may change after wait_for_sndbuf. When the main thread in the client starts a connection, if its out stream count is set to N while the in stream count in the server is set to N - 2, another thread in the client keeps sending the msgs with stream number N - 1, and waits for sndbuf before processing INIT_ACK. However, after processing INIT_ACK, the out stream count in the client is shrunk to N - 2, the same to the in stream count in the server. The crash occurs when the thread waiting for sndbuf is awake and sends the msg in a non-existing stream(N - 1), the call trace is as below: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] Call Trace: <TASK> sctp_cmd_send_msg net/sctp/sm_sideeffect.c:1114 [inline] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1777 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline] sctp_do_sm+0x197d/0x5310 net/sctp/sm_sideeffect.c:1170 sctp_primitive_SEND+0x9f/0xc0 net/sctp/primitive.c:163 sctp_sendmsg_to_asoc+0x10eb/0x1a30 net/sctp/socket.c:1868 sctp_sendmsg+0x8d4/0x1d90 net/sctp/socket.c:2026 inet_sendmsg+0x9d/0xe0 net/ipv4/af_inet.c:825 sock_sendmsg_nosec net/socket.c:722 [inline] sock_sendmsg+0xde/0x190 net/socket.c:745 The fix is to add an unlikely check for the send stream number after the thread wakes up from the wait_for_sndbuf. Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations") Reported-by: syzbot+47c24ca20a2fa01f082e@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Felix Fietkau authored
Based on further tests, it seems that the QDMA shaper is not able to perform shaping close to the MAC link rate without throughput loss. This cannot be compensated by increasing the shaping rate, so it seems to be an internal limit. Fix the remaining throughput regression by detecting that condition and limiting shaping to ports with lower link speed. This patch intentionally ignores link speed gain from TRGMII, because even on such links, shaping to 1000 Mbit/s incurs some throughput degradation. Fixes: f63959c7 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues") Tested-By:
Frank Wunderlich <frank-w@public-files.de> Reported-by:
Frank Wunderlich <frank-w@public-files.de> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gustav Ekelund authored
The force watchdog event bit is not cleared during SW reset in the mv88e6393x switch. This is a different behavior compared to mv886390 which clears the force WD event bit as advertised. This causes a force WD event to be handled over and over again as the SW reset following the event never clears the force WD event bit. Explicitly clear the watchdog event register to 0 in irq_action when handling an event to prevent the switch from sending continuous interrupts. Marvell aren't aware of any other stuck bits apart from the force WD bit. Fixes: de776d0d ("net: dsa: mv88e6xxx: add support for mv88e6393x family" Signed-off-by:
Gustav Ekelund <gustaek@axis.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Commit 0db3dc73 ("[NETPOLL]: tx lock deadlock fix") narrowed down the region under netif_tx_trylock() inside netpoll_send_skb(). (At that point in time netif_tx_trylock() would lock all queues of the device.) Taking the tx lock was problematic because driver's cleanup method may take the same lock. So the change made us hold the xmit lock only around xmit, and expected the driver to take care of locking within ->ndo_poll_controller(). Unfortunately this only works if netpoll isn't itself called with the xmit lock already held. Netpoll code is careful and uses trylock(). The drivers, however, may be using plain lock(). Printing while holding the xmit lock is going to result in rare deadlocks. Luckily we record the xmit lock owners, so we can scan all the queues, the same way we scan NAPI owners. If any of the xmit locks is held by the local CPU we better not attempt any polling. It would be nice if we could narrow down the check to only the NAPIs and the queue we're trying to use. I don't see a way to do that now. Reported-by:
Roman Gushchin <roman.gushchin@linux.dev> Fixes: 0db3dc73 ("[NETPOLL]: tx lock deadlock fix") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 01 Apr, 2023 2 commits
-
-
Eric Dumazet authored
syzbot was able to trigger a panic [1] in icmp_glue_bits(), or more exactly in skb_copy_and_csum_bits() There is no repro yet, but I think the issue is that syzbot manages to lower device mtu to a small value, fooling __icmp_send() __icmp_send() must make sure there is enough room for the packet to include at least the headers. We might in the future refactor skb_copy_and_csum_bits() and its callers to no longer crash when something bad happens. [1] kernel BUG at net/core/skbuff.c:3343 ! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 15766 Comm: syz-executor.0 Not tainted 6.3.0-rc4-syzkaller-00039-gffe78bbd #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:skb_copy_and_csum_bits+0x798/0x860 net/core/skbuff.c:3343 Code: f0 c1 c8 08 41 89 c6 e9 73 ff ff ff e8 61 48 d4 f9 e9 41 fd ff ff 48 8b 7c 24 48 e8 52 48 d4 f9 e9 c3 fc ff ff e8 c8 27 84 f9 <0f> 0b 48 89 44 24 28 e8 3c 48 d4 f9 48 8b 44 24 28 e9 9d fb ff ff RSP: 0018:ffffc90000007620 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000001e8 RCX: 0000000000000100 RDX: ffff8880276f6280 RSI: ffffffff87fdd138 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000 R10: 00000000000001e8 R11: 0000000000000001 R12: 000000000000003c R13: 0000000000000000 R14: ffff888028244868 R15: 0000000000000b0e FS: 00007fbc81f1c700(0000) GS:ffff88802ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2df43000 CR3: 00000000744db000 CR4: 0000000000150ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> icmp_glue_bits+0x7b/0x210 net/ipv4/icmp.c:353 __ip_append_data+0x1d1b/0x39f0 net/ipv4/ip_output.c:1161 ip_append_data net/ipv4/ip_output.c:1343 [inline] ip_append_data+0x115/0x1a0 net/ipv4/ip_output.c:1322 icmp_push_reply+0xa8/0x440 net/ipv4/icmp.c:370 __icmp_send+0xb80/0x1430 net/ipv4/icmp.c:765 ipv4_send_dest_unreach net/ipv4/route.c:1239 [inline] ipv4_link_failure+0x5a9/0x9e0 net/ipv4/route.c:1246 dst_link_failure include/net/dst.h:423 [inline] arp_error_report+0xcb/0x1c0 net/ipv4/arp.c:296 neigh_invalidate+0x20d/0x560 net/core/neighbour.c:1079 neigh_timer_handler+0xc77/0xff0 net/core/neighbour.c:1166 call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700 expire_timers+0x29b/0x4b0 kernel/time/timer.c:1751 __run_timers kernel/time/timer.c:2022 [inline] Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+d373d60fddbdc915e666@syzkaller.appspotmail.com Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230330174502.1915328-1-edumazet@google.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
This reverts commit c5b959ee. Reverted change is required after commit 3948b059 ("net: introduce a config option to tweak MAX_SKB_FRAGS") which does not exist in this tree, yet. It's only present in -next trees at the time of writing. Reported-by:
Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/all/20230331214444.GA1426512@dev-arch.thelio-3990X/Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 31 Mar, 2023 11 commits
-
-
Arseniy Krasnov authored
This adds conversion of VMCI specific error code to general -ENOMEM. It is needed, because af_vsock.c passes error value returned from transport to the user, which does not expect to get VMCI_ERROR_* values. Fixes: c43170b7 ("vsock: return errors other than -ENOMEM to socket") Signed-off-by:
Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by:
Vishnu Dasa <vdasa@vmware.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Slaby (SUSE) authored
When playing with various compilers or their versions, some choke on the t7xx code. For example (with gcc 13): In file included from ./arch/s390/include/generated/asm/rwonce.h:1, from ../include/linux/compiler.h:247, from ../include/linux/build_bug.h:5, from ../include/linux/bits.h:22, from ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:17: In function 'preempt_count', inlined from 't7xx_fsm_append_event' at ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:439:43: ../include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of 'const volatile int[0]' [-Werror=array-bounds=] There is no reason for any code in the kernel to be built with -Werror by default. Note that we have generic CONFIG_WERROR. So if anyone wants -Werror, they can enable that. Signed-off-by:
Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/all/20230330232717.1f8bf5ea@kernel.org/ Cc: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Cc: Intel Corporation <linuxwwan@intel.com> Cc: Chiranjeevi Rapolu <chiranjeevi.rapolu@linux.intel.com> Cc: Liu Haijun <haijun.liu@mediatek.com> Cc: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Cc: Ricardo Martinez <ricardo.martinez@linux.intel.com> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The type of MAX_SKB_FRAGS has changed recently, so the debug printk needs to be updated: drivers/net/ethernet/ti/netcp_core.c: In function 'netcp_create_interface': drivers/net/ethernet/ti/netcp_core.c:2084:30: error: format '%ld' expects argument of type 'long int', but argument 3 has type 'int' [-Werror=format=] 2084 | dev_err(dev, "tx-pool size too small, must be at least %ld\n", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 3948b059 ("net: introduce a config option to tweak MAX_SKB_FRAGS") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrea Righi authored
Commit 65b32f80 ("uapi: move IPPROTO_L2TP to in.h") moved the definition of IPPROTO_L2TP from a define to an enum, but since __stringify doesn't work properly with enums, we ended up breaking the modalias strings for the l2tp modules: $ modinfo l2tp_ip l2tp_ip6 | grep alias alias: net-pf-2-proto-IPPROTO_L2TP alias: net-pf-2-proto-2-type-IPPROTO_L2TP alias: net-pf-10-proto-IPPROTO_L2TP alias: net-pf-10-proto-2-type-IPPROTO_L2TP Use the resolved number directly in MODULE_ALIAS_*() macros (as we already do with SOCK_DGRAM) to fix the alias strings: $ modinfo l2tp_ip l2tp_ip6 | grep alias alias: net-pf-2-proto-115 alias: net-pf-2-proto-115-type-2 alias: net-pf-10-proto-115 alias: net-pf-10-proto-115-type-2 Moreover, fix the ordering of the parameters passed to MODULE_ALIAS_NET_PF_PROTO_TYPE() by switching proto and type. Fixes: 65b32f80 ("uapi: move IPPROTO_L2TP to in.h") Link: https://lore.kernel.org/lkml/ZCQt7hmodtUaBlCP@righiandr-XPS-13-7390Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
Andrea Righi <andrea.righi@canonical.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Tested-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Sit Wei Hong says: ==================== Fix PHY handle no longer parsing After the fixed link support was introduced, it is observed that PHY no longer attach to the MAC properly. So we introduce a helper function to determine if the MAC should expect to connect to a PHY and proceed accordingly. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Sit Wei Hong authored
Currently, intel_speed_mode_2500() will fix-up xpcs_an_inband to 1 if the underlying controller has a max speed of 1000Mbps. The value has been initialized and modified if it is a fixed-linked setup earlier. This patch removes the fix-up to allow for fixed-linked setup support. In stmmac_phy_setup(), ovr_an_inband is set based on the value of xpcs_an_inband. Which in turn will return an error in phylink_parse_mode() where MLO_AN_FIXED and ovr_an_inband are both set. Fixes: c8238631 ("stmmac: intel: prepare to support 1000BASE-X phy interface setting") Signed-off-by:
Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Sit Wei Hong authored
After the introduction of the fixed-link support, the MAC driver no longer attempt to scan for a PHY to attach to. This causes the non fixed-link setups to stop working. Using the phylink_expects_phy() to check and determine if the MAC should expect and attach a PHY. Fixes: ab21cf92 ("net: stmmac: make mdio register skips PHY scanning for fixed-link") Signed-off-by:
Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Signed-off-by:
Lai Peter Jun Ann <peter.jun.ann.lai@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Sit Wei Hong authored
Provide phylink_expects_phy() to allow MAC drivers to check if it is expecting a PHY to attach to. Since fixed-linked setups do not need to attach to a PHY. Provides a boolean value as to if the MAC should expect a PHY. Returns true if a PHY is expected. Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ziyang Xuan authored
Syzbot reported a bug as following: refcount_t: addition on 0; use-after-free. ... RIP: 0010:refcount_warn_saturate+0x17c/0x1f0 lib/refcount.c:25 ... Call Trace: <TASK> __refcount_add include/linux/refcount.h:199 [inline] __refcount_inc include/linux/refcount.h:250 [inline] refcount_inc include/linux/refcount.h:267 [inline] kref_get include/linux/kref.h:45 [inline] qrtr_node_acquire net/qrtr/af_qrtr.c:202 [inline] qrtr_node_lookup net/qrtr/af_qrtr.c:398 [inline] qrtr_send_resume_tx net/qrtr/af_qrtr.c:1003 [inline] qrtr_recvmsg+0x85f/0x990 net/qrtr/af_qrtr.c:1070 sock_recvmsg_nosec net/socket.c:1017 [inline] sock_recvmsg+0xe2/0x160 net/socket.c:1038 qrtr_ns_worker+0x170/0x1700 net/qrtr/ns.c:688 process_one_work+0x991/0x15c0 kernel/workqueue.c:2390 worker_thread+0x669/0x1090 kernel/workqueue.c:2537 It occurs in the concurrent scenario of qrtr_recvmsg() and qrtr_endpoint_unregister() as following: cpu0 cpu1 qrtr_recvmsg qrtr_endpoint_unregister qrtr_send_resume_tx qrtr_node_release qrtr_node_lookup mutex_lock(&qrtr_node_lock) spin_lock_irqsave(&qrtr_nodes_lock, ) refcount_dec_and_test(&node->ref) [node->ref == 0] radix_tree_lookup [node != NULL] __qrtr_node_release qrtr_node_acquire spin_lock_irqsave(&qrtr_nodes_lock, ) kref_get(&node->ref) [WARNING] ... mutex_unlock(&qrtr_node_lock) Use qrtr_node_lock to protect qrtr_node_lookup() implementation, this is actually improving the protection of node reference. Fixes: 0a7e0d0e ("net: qrtr: Migrate node lookup tree to spinlock") Reported-by: syzbot+a7492efaa5d61b51db23@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=a7492efaa5d61b51db23Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bobby Eshleman authored
This patch sets the skb owner in the recv and send path for virtio. For the send path, this solves the leak caused when virtio_transport_purge_skbs() finds skb->sk is always NULL and therefore never matches it with the current socket. Setting the owner upon allocation fixes this. For the recv path, this ensures correctness of accounting and also correct transfer of ownership in vsock_loopback (when skbs are sent from one socket and received by another). Fixes: 71dc9ec9 ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Signed-off-by:
Bobby Eshleman <bobby.eshleman@bytedance.com> Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/all/ZCCbATwov4U+GBUv@pop-os.localdomain/Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Johannes Berg says: ==================== Just a few fixes: * fix size calculation for EHT element to put into SKBs * remove erroneous pre-RCU calls for drivers not using sta_state calls * fix mesh forwarding and non-forwarding RX * fix mesh flow dissection * fix a potential NULL dereference on A-MSDU RX w/o station * make two variable non-static that really shouldn't be static * tag 'wireless-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix invalid drv_sta_pre_rcu_remove calls for non-uploaded sta wifi: mac80211: fix flow dissection for forwarded packets wifi: mac80211: fix mesh forwarding wifi: mac80211: fix receiving mesh packets in forwarding=0 networks wifi: mac80211: fix the size calculation of ieee80211_ie_len_eht_cap() wifi: mac80211: fix potential null pointer dereference wifi: mac80211: drop bogus static keywords in A-MSDU rx ==================== Link: https://lore.kernel.org/r/20230330203313.919164-1-johannes@sipsolutions.netSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 30 Mar, 2023 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from CAN and WPAN. Still quite a few bugs from this release. This pull is a bit smaller because major subtrees went into the previous one. Or maybe people took spring break off? Current release - regressions: - phy: micrel: correct KSZ9131RNX EEE capabilities and advertisement Current release - new code bugs: - eth: wangxun: fix vector length of interrupt cause - vsock/loopback: consistently protect the packet queue with sk_buff_head.lock - virtio/vsock: fix header length on skb merging - wpan: ca8210: fix unsigned mac_len comparison with zero Previous releases - regressions: - eth: stmmac: don't reject VLANs when IFF_PROMISC is set - eth: smsc911x: avoid PHY being resumed when interface is not up - eth: mtk_eth_soc: fix tx throughput regression with direct 1G links - eth: bnx2x: use the right build_skb() helper after core rework - wwan: iosm: fix 7560 modem crash on use on unsupported channel Previous releases - always broken: - eth: sfc: don't overwrite offload features at NIC reset - eth: r8169: fix RTL8168H and RTL8107E rx crc error - can: j1939: prevent deadlock by moving j1939_sk_errqueue() - virt: vmxnet3: use GRO callback when UPT is enabled - virt: xen: don't do grant copy across page boundary - phy: dp83869: fix default value for tx-/rx-internal-delay - dsa: ksz8: fix multiple issues with ksz8_fdb_dump - eth: mvpp2: fix classification/RSS of VLAN and fragmented packets - eth: mtk_eth_soc: fix flow block refcounting logic Misc: - constify fwnode pointers in SFP handling" * tag 'net-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits) net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow net: ethernet: mtk_eth_soc: fix L2 offloading with DSA untag offload net: ethernet: mtk_eth_soc: fix flow block refcounting logic net: mvneta: fix potential double-frees in mvneta_txq_sw_deinit() net: dsa: sync unicast and multicast addresses for VLAN filters too net: dsa: mv88e6xxx: Enable IGMP snooping on user ports only xen/netback: use same error messages for same errors test/vsock: new skbuff appending test virtio/vsock: WARN_ONCE() for invalid state of socket virtio/vsock: fix header length on skb merging bnxt_en: Add missing 200G link speed reporting bnxt_en: Fix typo in PCI id to device description string mapping bnxt_en: Fix reporting of test result in ethtool selftest i40e: fix registers dump after run ethtool adapter self test bnx2x: use the right build_skb() helper net: ipa: compute DMA pool size properly net: wwan: iosm: fixes 7560 modem crash net: ethernet: mtk_eth_soc: fix tx throughput regression with direct 1G links ice: fix invalid check for empty list in ice_sched_assoc_vsi_to_agg() ice: add profile conflict check for AVF FDIR ...
-
Linus Torvalds authored
Merge tag 'for-6.3/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix two DM core bugs in the code that handles splitting "abnormal" IO (discards, write same and secure erase) and issuing that IO to the correct underlying devices (and offsets within those devices). * tag 'for-6.3/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix __send_duplicate_bios() to always allow for splitting IO dm: fix improper splitting for abnormal bios
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Daniel Vetter: "Two regression fixes in here, otherwise just the usual stuff: - i915 fixes for color mgmt, psr, lmem flush, hibernate oops, and more - amdgpu: dp mst and hibernate regression fix - etnaviv: revert fdinfo support (incl drm/sched revert), leak fix - misc ivpu fixes, nouveau backlight, drm buddy allocator 32bit fixes" * tag 'drm-fixes-2023-03-30' of git://anongit.freedesktop.org/drm/drm: (27 commits) Revert "drm/scheduler: track GPU active time per entity" Revert "drm/etnaviv: export client GPU usage statistics via fdinfo" drm/etnaviv: fix reference leak when mmaping imported buffer drm/amdgpu: allow more APUs to do mode2 reset when go to S4 drm/amd/display: Take FEC Overhead into Timeslot Calculation drm/amd/display: Add DSC Support for Synaptics Cascaded MST Hub drm: test: Fix 32-bit issue in drm_buddy_test drm: buddy_allocator: Fix buddy allocator init on 32-bit systems drm/nouveau/kms: Fix backlight registration drm/i915/perf: Drop wakeref on GuC RC error drm/i915/dpt: Treat the DPT BO as a framebuffer drm/i915/gem: Flush lmem contents after construction drm/i915/tc: Fix the ICL PHY ownership check in TC-cold state drm/i915: Disable DC states for all commits drm/i915: Workaround ICL CSC_MODE sticky arming drm/i915: Add a .color_post_update() hook drm/i915: Move CSC load back into .color_commit_arm() when PSR is enabled on skl/glk drm/i915: Split icl_color_commit_noarm() from skl_color_commit_noarm() drm/i915/pmu: Use functions common with sysfs to read actual freq accel/ivpu: Fix IPC buffer header status field value ...
-
Mike Snitzer authored
Commit 7dd76d1f ("dm: improve bio splitting and associated IO accounting") only called setup_split_accounting() from __send_duplicate_bios() if a single bio were being issued. But the case where duplicate bios are issued must call it too. Otherwise the bio won't be split and resubmitted (via recursion through block core back to DM) to submit the later portions of a bio (which may map to an entirely different target). For example, when discarding an entire DM striped device with the following DM table: vg-lvol0: 0 159744 striped 2 128 7:0 2048 7:1 2048 vg-lvol0: 159744 45056 striped 2 128 7:2 2048 7:3 2048 Before (broken, discards the first striped target's devices twice): device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=79872 device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=79872 device-mapper: striped: target_stripe=0, bdev=7:0, start=2049 len=22528 device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=22528 After (works as expected): device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=79872 device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=79872 device-mapper: striped: target_stripe=0, bdev=7:2, start=2048 len=22528 device-mapper: striped: target_stripe=1, bdev=7:3, start=2048 len=22528 Fixes: 7dd76d1f ("dm: improve bio splitting and associated IO accounting") Cc: stable@vger.kernel.org Reported-by:
Orange Kao <orange@aiven.io> Signed-off-by:
Mike Snitzer <snitzer@kernel.org>
-
Mike Snitzer authored
"Abnormal" bios include discards, write zeroes and secure erase. By no longer passing the calculated 'len' pointer, commit 7dd06a25 ("dm: allow dm_accept_partial_bio() for dm_io without duplicate bios") took a senseless approach to disallowing dm_accept_partial_bio() from working for duplicate bios processed using __send_duplicate_bios(). It inadvertently and incorrectly stopped the use of 'len' when initializing a target's io (in alloc_tio). As such the resulting tio could address more area of a device than it should. For example, when discarding an entire DM striped device with the following DM table: vg-lvol0: 0 159744 striped 2 128 7:0 2048 7:1 2048 vg-lvol0: 159744 45056 striped 2 128 7:2 2048 7:3 2048 Before this fix: device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=102400 blkdiscard: attempt to access beyond end of device loop0: rw=2051, sector=2048, nr_sectors = 102400 limit=81920 device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=102400 blkdiscard: attempt to access beyond end of device loop1: rw=2051, sector=2048, nr_sectors = 102400 limit=81920 After this fix; device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=79872 device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=79872 Fixes: 7dd06a25 ("dm: allow dm_accept_partial_bio() for dm_io without duplicate bios") Cc: stable@vger.kernel.org Reported-by:
Orange Kao <orange@aiven.io> Signed-off-by:
Mike Snitzer <snitzer@kernel.org>
-
Felix Fietkau authored
The cache needs to be flushed to ensure that the hardware stops offloading the flow immediately. Fixes: 33fc42de ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries") Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230330120840.52079-3-nbd@nbd.nameSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Felix Fietkau authored
Check for skb metadata in order to detect the case where the DSA header is not present. Fixes: 2d7605a7 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging") Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230330120840.52079-2-nbd@nbd.nameSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Felix Fietkau authored
Since we call flow_block_cb_decref on FLOW_BLOCK_UNBIND, we also need to call flow_block_cb_incref for a newly allocated cb. Also fix the accidentally inverted refcount check on unbind. Fixes: 502e84e2 ("net: ethernet: mtk_eth_soc: add flow offloading support") Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230330120840.52079-1-nbd@nbd.nameSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Russell King (Oracle) authored
Reported on the Turris forum, mvneta provokes kernel warnings in the architecture DMA mapping code when mvneta_setup_txqs() fails to allocate memory. This happens because when mvneta_cleanup_txqs() is called in the mvneta_stop() path, we leave pointers in the structure that have been freed. Then on mvneta_open(), we call mvneta_setup_txqs(), which starts allocating memory. On memory allocation failure, mvneta_cleanup_txqs() will walk all the queues freeing any non-NULL pointers - which includes pointers that were previously freed in mvneta_stop(). Fix this by setting these pointers to NULL to prevent double-freeing of the same memory. Fixes: 2adb719d ("net: mvneta: Implement software TSO") Link: https://forum.turris.cz/t/random-kernel-exceptions-on-hbl-tos-7-0/18865/8Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1phUe5-00EieL-7q@rmk-PC.armlinux.org.ukSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c6 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a ("net: dsa: manage flooding on the CPU ports") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Steffen Bätz authored
Do not set the MV88E6XXX_PORT_CTL0_IGMP_MLD_SNOOP bit on CPU or DSA ports. This allows the host CPU port to be a regular IGMP listener by sending out IGMP Membership Reports, which would otherwise not be forwarded by the mv88exxx chip, but directly looped back to the CPU port itself. Fixes: 54d792f2 ("net: dsa: Centralise global and port setup code into mv88e6xxx.") Signed-off-by:
Steffen Bätz <steffen@innosonix.de> Signed-off-by:
Fabio Estevam <festevam@denx.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329150140.701559-1-festevam@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
https://git.pengutronix.de/git/lst/linuxDaniel Vetter authored
- revert gpu time fdinfo support - reference leak fix on imported buffers Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/de8e08c2599ec0e22456ae36e9757b9ff14c2124.camel@pengutronix.de
-
Daniel Vetter authored
Merge tag 'amd-drm-fixes-6.3-2023-03-30' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.3-2023-03-30: amdgpu: - Hibernation regression fix Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230330153859.18332-1-alexander.deucher@amd.com
-
git://anongit.freedesktop.org/drm/drm-miscDaniel Vetter authored
Short summary of fixes pull: * various ivpu fixes * fix nouveau backlight registration * fix buddy allocator in 32-bit systems Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230330141006.GA22908@linux-uq9g
-