- 19 Jul, 2020 6 commits
-
-
Hans Verkuil authored
Typo in comment block: v4l2_subdev_get_try_crop -> v4l2_subdev_get_try_compose Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Hans Verkuil authored
Fix this smatch warning: drivers/media/cec/core/cec-api.c:156 cec_adap_g_log_addrs() warn: check that 'log_addrs' doesn't leak information (struct has a hole after 'features') Signed-off-by:
-
Oliver Neukum authored
A malicious USB device may lack endpoints the driver assumes to exist Accessing them leads to NULL pointer accesses. This patch introduces sanity checking. Reported-and-tested-by: syzbot+cabfa4b5b05ff6be4ef0@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Fixes: 866b8695 ("Staging: add the go7007 video driver") Signed-off-by:
-
Dmitry Osipenko authored
VDE partition is left turned ON after bootloader on most devices, hence let's ensure that it's turned OFF in order to lower power leakage while hardware is idling by turning it ON and OFF during of the driver's probe. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Dmitry Osipenko authored
On some devices bootloader isn't ready to a clamped VDE power, and thus, machine hangs on a warm reboot (CPU reset). The VDE power partition is turned ON by default on a cold boot, hence VDE driver should keep power partition enabled on system's reboot too. This fixes hang on a warm reboot on a Tegra20 Acer A500 device, which is handy if Embedded Controller driver is unavailable, i.e. cold reboot can't be performed. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Dmitry Osipenko authored
Runtime PM is always available on Tegra nowadays since commit 40b2bb1b ("ARM: tegra: enforce PM requirement"), hence the case of unavailable RPM doesn't need to be handled. Signed-off-by:
-
- 04 Jul, 2020 34 commits
-
-
Dariusz Marcinkiewicz authored
Do not fail probing when device_init_wakeup fails. device_init_wakeup fails when the device is already enabled as wakeup device. Hence, the driver fails to probe the device if: - The device has already been enabled for wakeup (by e.g. sysfs) - The driver has been unloaded and is being loaded again. This goal of the patch is to fix the above cases. Overwhelming majority of the drivers do not check device_init_wakeup return code. Fixes: cd70de2d ("media: platform: Add ChromeOS EC CEC driver") Signed-off-by:
Dariusz Marcinkiewicz <darekm@google.com> Signed-off-by:
-
Paul Kocialkowski authored
Setting the output CSC mode is required for a YUV output, but must not be set when the input is also YUV. Doing this (as tested with a YUV420P to YUV420P conversion) results in wrong colors. Adapt the logic to only set the output CSC mode when the output is YUV and the input is RGB. Also add a comment to clarify the rationale. Fixes: f7e7b48e ("[media] rockchip/rga: v4l2 m2m support") Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Paul Kocialkowski authored
This introduces two macros: RGA_COLOR_FMT_IS_YUV and RGA_COLOR_FMT_IS_RGB which allow quick checking of the colorspace familily of a RGA color format. These macros are then used to refactor the logic for CSC mode selection. The two nested tests for input colorspace are simplified into a single one, with a logical and, making the whole more readable. Signed-off-by:
-
Chuhong Yuan authored
fimc_md_get_pinctrl() misses a check for pinctrl_lookup_state(). Add the missed check to fix it. Fixes: 4163851f ("[media] s5p-fimc: Use pinctrl API for camera ports configuration]") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
-
Dafna Hirschfeld authored
When a size error is signaled, it is possible to read a register to see where the error comes from. So, in debugfs the general error 'pic_size_err' can be replaced with 3 more precise errors. Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Chuhong Yuan authored
This driver does not call media_entity_cleanup() in the error handler of tvp5150_registered() and tvp5150_remove(), while it has called media_entity_pads_init() at first. Add the missed calls to fix it. Fixes: 0556f1d5 ("media: tvp5150: add input source selection of_graph support") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Dan Carpenter authored
It's not possible for "pcdev->mclk" to be zero because we check for that earlier and set it to 20000000 in that situation. If it were possible, that would be a problem because it could have lead to an Oops in the error handling when we call v4l2_clk_unregister(pcdev->mclk_clk); Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Niklas Söderlund authored
Since the driver was picked-up the starting of the PHY have changed quiet a bit. An artifact of these changes is the now poorly named callback confirm_start(). It used to confirm start of the PHY but now performs post PHY start initialization, rename it to phy_post_init() to reflect this. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Stanimir Varbanov authored
Add bit-depth change as one more reason which could change in the middle of the stream. For the worst case the stream is 8bit at the beginning but later in the bit-stream it changes to 10bit. That change should be propagated to the client so that it can take the appropriate action. In that case it has to stop the streaming on the capture queue, re-negotiate the pixel format, allocate new buffers and start the streaming again. Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Gustavo A. R. Silva authored
The tpg_alloc() and vmalloc() functions have no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This issue was found with the help of Coccinelle and, audited and fixed manually. Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
John Cox authored
Check against length in v4l2_buffer rather than vb2_buffer when the buffer is a dmabuf. This makes the single plane test the same as the existing multiplanar test. Signed-off-by:
John Cox <jc@kynesim.co.uk> Signed-off-by:
-
Helen Koike authored
Resizer sink pad is limited by what the ISP can generate. The configurations describes what the resizer can produce. This was tested on a Scarlet device with ChromiumOs, where the selfpath receives 2592x1944 and produces 1600x1200 (which isn't possible without this fix). Fixes: 56e3b29f ("media: staging: rkisp1: add streaming paths") Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Fix up inconsistent usage of upper and lowercase letters in "Samsung" and "Exynos" names. "SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked names. Therefore they should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Dafna Hirschfeld authored
When setting the sink format of the 'rkisp1_resizer' the format should be supported by 'rkisp1_isp' on the video source pad. This patch checks this condition and sets the format to default if the condition is false. Fixes: 56e3b29f "media: staging: rkisp1: add streaming paths" Signed-off-by:
-
Dafna Hirschfeld authored
The macros 'RKISP1_DIR_*' are flags that indicate on which pads of the isp subdevice the media bus code is supported. So the prefix RKISP1_ISP_SD_ is better. Signed-off-by:
-
Dafna Hirschfeld authored
The macro RKISP1_DIR_SINK_SRC is a mask of two flags. The macro hides the fact that it's a mask and the code is actually more clear if we replace it the with bitwise-or explicitly. Signed-off-by:
-
Dafna Hirschfeld authored
The rkisp1_resizer's enum callback 'rkisp1_rsz_enum_mbus_code' calls the enum callback of the 'rkisp1_isp' on it's video sink pad. This is a bug, the resizer should support the same formats supported by the 'rkisp1_isp' on the source pad (not the sink pad). Fixes: 56e3b29f "media: staging: rkisp1: add streaming paths" Signed-off-by:
-
Dan Carpenter authored
The devm_ioremap() function doesn't return error pointers, it returns NULL on error. Fixes: f20387df ("media: allegro: add Allegro DVT video IP core driver") Signed-off-by:
-
Laurent Pinchart authored
When debugging issues that involve more than one video queue, messages related to multiple queues get interleaved without any easy way to tell which queue they relate to. Fix this by adding a queue name to vb2_queue, and printing it in all debug messages in the vb2 core and V4L2 layers. If the name isn't set by drivers, it is automatically filled with the queue direction and address. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Benoit Parrot authored
Several drivers implement the same enclosed_rectangle() function to check if a rectangle is enclosed into another. Replace this with the newly added v4l2_rect_enclosed() helper function. Signed-off-by:
Benoit Parrot <bparrot@ti.com> Acked-by:
Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Reviewed-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Benoit Parrot authored
Add a helper function to check if one rectangle is enclosed inside another. Signed-off-by:
-
Lad Prabhakar authored
This patch adds support for MEDIA_BUS_FMT_SRGGB8_1X8 format for CSI2 input. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
-
Lad Prabhakar authored
Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format in rcar-vin by setting format type to RAW8 in VNMC register and appropriately setting the bpp and bytesperline to enable V4L2_PIX_FMT_SRGGB8. Signed-off-by:
-
Lad Prabhakar authored
Up until now the VIN was capable to convert any of its supported input mbus formats to any of it's supported output pixel formats. With the addition of RAW formats this is no longer true. This patch invalidates the pipeline by adding a check if given vin input format can be converted to supported output pixel format. Signed-off-by:
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
-
Mansur Alisha Shaik authored
Currently we are considering the instances which are available in core->inst list for load calculation in min_loaded_core() function, but this is incorrect because by the time we call decide_core() for second instance, the third instance not filled yet codec_freq_data pointer. Solve this by considering the instances whose session has started. Cc: stable@vger.kernel.org # v5.7+ Fixes: 4ebf9693 ("media: venus: introduce core selection") Tested-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by:
-
Evgeny Novikov authored
If lirc_dev_init() fails during module initialization, rc_core_init() returns 0 denoting success. This can cause different issues during further operation of the module. The patch fixes the return value of rc_core_init() on the corresponding error handling path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Evgeny Novikov <novikov@ispras.ru> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
Found with clang: drivers/media/pci/cx23885/cx23888-ir.c:178:19: warning: unused function 'ns_to_clock_divider' [-Wunused-function] static inline u16 ns_to_clock_divider(unsigned int ns) ^ drivers/media/pci/cx23885/cx23888-ir.c:184:28: warning: unused function 'clock_divider_to_ns' [-Wunused-function] static inline unsigned int clock_divider_to_ns(unsigned int divider) ^ drivers/media/pci/cx23885/cx23888-ir.c:202:19: warning: unused function 'freq_to_clock_divider' [-Wunused-function] static inline u16 freq_to_clock_divider(unsigned int freq, ^ Cc: Andy Walls <awalls@md.metrocast.net> Signed-off-by: -
Sean Young authored
Found with clang: drivers/media/rc/fintek-cir.c:55:20: warning: unused function 'fintek_clear_reg_bit' [-Wunused-function] static inline void fintek_clear_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg) Signed-off-by:
-
Sean Young authored
Since this driver could never transmit IR, setting the tx carrier makes no sense. Fixes: 87284271 ("media: rc: nuvoton: remove rudimentary transmit functionality") Signed-off-by:
-
Sean Young authored
This function has never been used. Found with clang: drivers/media/dvb-frontends/drxk_hard.c:159:19: warning: unused function 'MulDiv32' [-Wunused-function] static inline u32 MulDiv32(u32 a, u32 b, u32 c) Signed-off-by:
-
Hans Verkuil authored
After the removal of the soc_camera driver and the soc_camera.h header the SOC-CAMERA entry in the MAINTAINERS file can also be removed. Signed-off-by:
-
Hans Verkuil authored
Drop all configs with the CONFIG_SOC_CAMERA prefix since those have been removed. SOC_CAMERA support for the sh architecture was removed a long time ago. Drop it from the configs. Signed-off-by:
-
Hans Verkuil authored
Drop all configs with the CONFIG_SOC_CAMERA prefix since those have been removed. Signed-off-by:
-
