- 29 Jun, 2015 1 commit
-
-
Alex Deucher authored
Spotted by Dan Carpenter. This is a slight variant of his fix. Signed-off-by:Alex Deucher <alexander.deucher@amd.com>
-
- 26 Jun, 2015 1 commit
-
-
Lukas Wunner authored
On the MacBook Pro, power of the gpu is cut by a gmux chip. Sometimes the gpu gets stuck in powersaving mode and refuses to wake up ("Refused to change power state, currently in D3"). Inserting a delay between setting the gpu to D3hot and cutting the power seems to help (most of the time). This issue and its (partial) remediation by the patch was observed with an Nvidia GT650M (NVE7 / GK107). Signed-off-by:Lukas Wunner <lukas@wunner.de> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 25 Jun, 2015 1 commit
-
-
Dave Airlie authored
I've only seen this once, and I failed to capture the lockdep backtrace, but I did some investigations. If we are calling into the MST layer from EDID probing, we have the mode_config mutex held, if during that EDID probing, the MST hub goes away, then we can get a deadlock where the connector destruction function in the driver tries to retake the mode config mutex. This offloads connector destruction to a workqueue, and avoid the subsequenct lock ordering issue. Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by:
-
- 24 Jun, 2015 3 commits
-
-
Daniel Stone authored
Now that the interface has been proven by a port of Weston (using all atomic features including TEST_ONLY), remove the module parameter guarding the atomic API from being exposed, and let it run free in the wild. Signed-off-by:
Daniel Stone <daniels@collabora.com> Acked-by:
-
Daniel Vetter authored
Since there's only one global instance ever we don't need to have anything fancy. Stops a WARNING in the get_unique ioctl that the unique name isn't set. Cc: <stable@vger.kernel.org> # 4.1+ only Reportedy-and-tested-by:
Fabio Coatti <fabio.coatti@gmail.com> Cc: Fabio Coatti <fabio.coatti@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
-
Inki Dae authored
This patch fixes the below build error reported by Stephen, Stephen reported: After merging the drm-exynos tree, today's linux-next build (x86_64 allmodconfig) failed like this: drivers/media/i2c/adv7604.o: In function `of_graph_get_endpoint_by_regs': adv7604.c:(.text+0x586c): multiple definition of `of_graph_get_endpoint_by_regs' drivers/media/i2c/adv7343.o:adv7343.c:(.text+0xa13): first defined here drivers/media/platform/soc_camera/atmel-isi.o: In function `of_graph_get_endpoint_by_regs': atmel-isi.c:(.text+0x1ec9): multiple definition of `of_graph_get_endpoint_by_regs' drivers/media/platform/soc_camera/soc_camera.o:soc_camera.c:(.text+0x2ce3): first defined here drivers/media/platform/soc_camera/rcar_vin.o: In function `of_graph_get_endpoint_by_regs': rcar_vin.c:(.text+0x307c): multiple definition of `of_graph_get_endpoint_by_regs' drivers/media/platform/soc_camera/soc_camera.o:soc_camera.c:(.text+0x2ce3): first defined here Caused by commit: a0f7001c18ca ("of: add helper for getting endpoint node of specific identifiers") To fix the error, this patch declares of_graph_get_endpoint_by_regs function with "static inline". Signed-off-by:Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
- 23 Jun, 2015 6 commits
-
-
Dave Airlie authored
If we are doing an MST transaction and we've gotten HPD and we lookup the device from the incoming msg, we should take the mgr lock around it, so that mst_primary and mstb->ports are valid. Reviewed-by:
-
Daniel Vetter authored
This validates the mst_primary under the lock, and then calls into the check and send function. This makes the code a lot easier to understand the locking rules in. Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2015-06-22' of git://anongit.freedesktop.org/drm-intel into drm-next fix warning introduced in last -fixes * tag 'drm-intel-next-fixes-2015-06-22' of git://anongit.freedesktop.org/drm-intel: drm/i915: Silence compiler warning
-
Dave Airlie authored
This symbol came via exynos-next, but modular builds are broken so just fix it up now. Signed-off-by: -
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Summary: . Add atomic feature support - Exynos also now supports atomic feature. However, it doesn't guarantee atomic operation yet, and is required for more cleanups. This time we just modified for Exynos drm driver to use atomic interfaces instead of legacy ones. Next time, we will enhance Exynos drm driver to support the atomic operation. . Add iommu support - This is a patch series according to below Exynos iommu integration work with DT and dma-mapping subsystem, http://lwn.net/Articles/607626/ . Consolidate Exynos drm driver initialization. - This patch sereis resolves the issue that only the first compoments was bound when happened deferred probing for other pipelines and also makes the driver to be more cleanned up by moving the dispered codes for registering kms drivers to one place. . Add new MIC, DECON drivers, and MIPI-DSI support for Exynos5433. - Add MIC(Mobile image compressor) driver. MIC is a new IP for Exynos5433 and later, which is used to transfer frame data to MIPI-DSI controller compressing the data to reduce memory bandwidth. - Add DECON driver for Exynos5433 SoC. This IP is a dislay controller similar to Exynos7's one but this controller has much different registers from Exynos7's ones so this driver has been implemented separately. We will implement a helper modules for FIMD and two DECON controllers to remove duplicated codes later. - Add Exynos5433 SoC support to MIPI-DSI driver, and device tree relevant patches. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (50 commits) ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi' drm/exynos: dsi: do not set TE GPIO direction by input drm/exynos: dsi: add support for MIC driver as a bridge drm/exynos: dsi: add support for Exynos5433 drm/exynos: dsi: make use of array for clock access drm/exynos: dsi: make use of driver data for static values drm/exynos: dsi: add macros for register access drm/exynos: dsi: rename pll_clk to sclk_clk drm/exynos: mic: add MIC driver of: add helper for getting endpoint node of specific identifiers drm/exynos: add Exynos5433 decon driver drm/exynos: fix the input prompt of Exynos7 DECON drm/exynos: add drm_iommu_attach_device_if_possible() drm/exynos: Add the dependency for DRM_EXYNOS to DPI/DSI/DP drm/exynos: remove the dependency of DP driver for ARCH_EXYNOS drm/exynos: do not wait for vblank at atomic operation drm/exynos: Remove unused vma field of exynos_drm_gem_obj drm/exynos: fimd: fix page fault issue with iommu drm/exynos: iommu: improve a check for non-iommu dma_ops drm/exynos: iommu: detach from default dma-mapping domain on init ...
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
One more drm-misc pull for 4.2. The important one is the fix from Laurent for Daniel Stone's mode_blob work. * tag 'topic/drm-misc-2015-06-22' of git://anongit.freedesktop.org/drm-intel: drm/atomic: Don't set crtc_state->enable manually drm: prime: Document gem_prime_mmap drm: Avoid the double clflush on the last cache line in drm_clflush_virt_range() drm/atomic: Extract needs_modeset function drm/cma: Fix 64-bit size_t build warnings Documentation/drm: Update rotation property
-
- 22 Jun, 2015 17 commits
-
-
Hyungwon Hwang authored
The clock which was named as 'pll_clk' is actually not the clock source of PLL in MIPI DSI. This patch fixes this disagreement. Signed-off-by:
Hyungwon Hwang <human.hwang@samsung.com> Acked-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Laurent Pinchart authored
The enable field needs to be kept in sync with the mode_blob field. Call drm_atomic_set_mode_prop_for_crtc() instead of setting enable to false in order to dereference the mode blob correctly. v2: - Check the return value of drm_atomic_set_mode_prop_for_crtc() - Drop the num_connectors local variable Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Hyungwon Hwang authored
On some board, TE GPIO should be configured properly thoughout pinctrl driver as an wakeup interrupt. So this gpio should be configurable in the board's DT, not being requested as a input pin. Signed-off-by:
-
Hyungwon Hwang authored
MIC must be initilized by MIPI DSI when it is being bound. Signed-off-by:
-
Hyungwon Hwang authored
This patch adds support for Exynos5433 mipi dsi. Signed-off-by:
-
Hyungwon Hwang authored
This patch make the driver to use an array for clock access. The number of clocks are different from the existing MIPI DSI driver and Exynos5433 MIPI DSI driver. So this patch is needed before adding support for Exynos5433 MIPI DSI driver. Signed-off-by:
-
Hyungwon Hwang authored
Exynos MIPI DSI driver uses some static values such as address offsets, register setting values, and etc. This patch makes the driver get those values from the driver data. Signed-off-by:
-
Hyungwon Hwang authored
This patch adds macros for register writing/reading. This is needed for adding support Exynos5433 MIPI DSI driver, not by using if statement, but by using driver data. Signed-off-by:
-
Hyungwon Hwang authored
This patch renames pll_clk to sclk_clk. The clock referenced by pll_clk is actually not the pll input clock for dsi. The pll input clock comes from the board's oscillator directly. But for the backward compatibility, the old clock name "pll_clk" is also OK. Signed-off-by:
-
Hyungwon Hwang authored
MIC(Mobile image compressor) is newly added IP in Exynos5433. MIC resides between decon and mipi dsim, and compresses frame data by 50%. With dsi, not display port, to send frame data to the panel, the bandwidth is not enough. That is why this compressor is introduced. Signed-off-by:
-
Hyungwon Hwang authored
When there are multiple ports or multiple endpoints in a port, they have to be distinguished by the value of reg property. It is common. The drivers can get the specific endpoint in the specific port via this function. Now the drivers have to implement this code in themselves or have to force the order of dt nodes to get the right node. Signed-off-by:
Rob Herring <robh+dt@kernel.org> Signed-off-by:
-
Joonyoung Shim authored
DECON(Display and Enhancement Controller) is new IP replacing FIMD in Exynos5433. This patch adds Exynos5433 decon driver. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
-
Hyungwon Hwang authored
This patch is a preparation patch for adding support for Exynos5433 DECON. Exynos7 DECON have to be distinguished from Exynos5433 DECON. Signed-off-by:
-
Hyungwon Hwang authored
Every CRTC drivers in Exynos DRM implements the code which checks whether IOMMU is supported or not, and if supported enable it. Making new helper for it generalize each CRTC drivers. Signed-off-by:
-
Hyungwon Hwang authored
Without this dependency, Kbuild is confused and the configs below them are not placed under Exynos DRM. This patch fixes it, so the configs below them become to be placed under Exynos DRM. Signed-off-by:
-
Hyungwon Hwang authored
This dependency is a historical thing. It is added when this DP driver is under media subsystem. Now because it is under Exynos DRM, this dependency is not needed anymore. Signed-off-by:
-
Ander Conselvan de Oliveira authored
Silence the following -Wmaybe-uninitialized warnings and make the code more clear. drivers/gpu/drm/i915/intel_display.c: In function ‘__intel_set_mode’: drivers/gpu/drm/i915/intel_display.c:11844:14: warning: ‘crtc_state’ may be used uninitialized in this function [-Wmaybe-uninitialized] return state->mode_changed || state->active_changed; ^ drivers/gpu/drm/i915/intel_display.c:11854:25: note: ‘crtc_state’ was declared here struct drm_crtc_state *crtc_state; ^ drivers/gpu/drm/i915/intel_display.c:11868:6: warning: ‘crtc’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (crtc != intel_encoder->base.crtc) ^ drivers/gpu/drm/i915/intel_display.c:11853:19: note: ‘crtc’ was declared here struct drm_crtc *crtc; Reported-by:Chris Wilson <chris@chris-wilson.co.uk> Suggested-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
- 19 Jun, 2015 11 commits
-
-
Daniel Thompson authored
gem_prime_map is not currently described in the DRM manual, lets document it. Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Inki Dae authored
This patch resolves the issue that refresh rate got low at extension mode test with fimd and vidi combination. The problem was because atomic_commit callback waited for the completion of vblank to gaurantee crtc relevant registers are updated from shadow registers to real ones. However, the waiting there is really unnecessary because page flip operation does already it. Signed-off-by: -
Krzysztof Kozlowski authored
The field 'vma' of 'exynos_drm_gem_obj' structure was introduced in 2a3098ff ("drm/exynos: add userptr feature for g2d module") but is not referenced anywhere. One instance of 'exynos_drm_gem_obj' may be mapped to multiple user-space VMAs so 'vma' field does not look useful anyway. Signed-off-by:
-
Inki Dae authored
This patch resolves page fault issue with iommu and atomic feature when modetest test application is terminated. ENWIN_F field of WINCONx register enables or disable a dma channel to each hardware overlay - the value of the field will be updated to real register after vsync. So this patch makes sure the dma channel is disabled by waiting for vsync one time after clearing shadow registers to all dma channels. Below shows the page fault issue: setting mode 720x1280-60Hz@XR24 on connectors 31, crtc 29 freq: 59.99Hz [ 34.831025] PAGE FAULT occurred at 0x20400000 by 11e20000.sysmmu(Page table base: 0x6e324000) [ 34.838072] Lv1 entry: 0x6e92dc01 [ 34.841489] ------------[ cut here ]------------ [ 34.846058] kernel BUG at drivers/iommu/exynos-iommu.c:364! [ 34.851614] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 34.857428] Modules linked in: <--snip--> [ 35.210894] [<c02880d0>] (exynos_sysmmu_irq) from [<c00608f8>] (handle_irq_event_percpu+0x78/0x134) [ 35.219914] [<c00608f8>] (handle_irq_event_percpu) from [<c00609f0>] (handle_irq_event+0x3c/0x5c) [ 35.228768] [<c00609f0>] (handle_irq_event) from [<c0063698>] (handle_level_irq+0xc4/0x13c) [ 35.237101] [<c0063698>] (handle_level_irq) from [<c005ff7c>] (generic_handle_irq+0x2c/0x3c) [ 35.245521] [<c005ff7c>] (generic_handle_irq) from [<c02214ec>] (combiner_handle_cascade_irq+0x94/0x100) [ 35.254980] [<c02214ec>] (combiner_handle_cascade_irq) from [<c005ff7c>] (generic_handle_irq+0x2c/0x3c) [ 35.264353] [<c005ff7c>] (generic_handle_irq) from [<c0060248>] (__handle_domain_irq+0x7c/0xec) [ 35.273034] [<c0060248>] (__handle_domain_irq) from [<c0009434>] (gic_handle_irq+0x30/0x68) [ 35.281366] [<c0009434>] (gic_handle_irq) from [<c0012ec0>] (__irq_svc+0x40/0x74) Signed-off-by: -
Marek Szyprowski authored
DRM Exynos driver is relying on dma-mapping internal structures when used with IOMMU enabled. This patch partially hides dma-mapping internal things by using proper get_dma_ops/set_dma_ops calls. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
This patch adds code, which detach sub-device nodes from default iommu domain if such has been configured. This lets Exynos DRM driver to properly attach sub-devices to its own, common for all sub-devices domain. Signed-off-by:
Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by:
-
Marek Szyprowski authored
One should not do any assumptions on the stare of the fimd hardware during driver initialization, so to properly reset fimd before enabling IOMMU, one should ensure that all power domains and clocks are really enabled. This patch adds pm_runtime and clocks management in the fimd_clear_channel() function to ensure that any access to fimd registers will be performed with clocks and power domains enabled. Signed-off-by:
-
Joonyoung Shim authored
When the fimd is disabled by fimd_disable(), enabled overlay layers also are disabled. If clocks for fimd are enabled by fimd_enable() on this case, it can lead IOMMU page fault. The reason is that VIDCON0_ENVID and VIDCON0_ENVID_F bits of VIDCON0 register are set still even though fimd is disabled, so it may continue display output of prior when clocks for fimd are enabled again. Signed-off-by:
-
Joonyoung Shim authored
With atomic modesetting all the control for CRTC, Planes, Encoders and Connectors should come from DRM core, so the driver is not allowed to enable or disable planes from inside the crtc_enable()/disable() call. But it needs to disable planes with crtc_disable in exynos driver internally. Because crtc is disabled before plane is disabled, it means plane_disable just returns without any register changes, then we cannot be sure setting register to disable plane when crtc is disable. This patch removes this chainned calls to enable plane from exynos hw drivers code letting only DRM core touch planes except to disable plane. Also it leads eliminable enabled and resume of struct exynos_drm_plane. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Joonyoung Shim authored
The reason waiting vblank is to be power gated and disabled clocks after dma operation is completed. The dma operation is stopped already before be power gated and clocks are disabled when mixer is disabled by commit 381be025("drm/exynos: stop mixer before gating clocks during poweroff"). Don't need to wait vblank anymore. Signed-off-by:
-
Hyungwon Hwang authored
FIMC & GSC driver can calculate the offset of planes. So there are use cases which IPP receives just one GEM handle of an image with multiple plane. This patch extends ipp_validate_mem_node() to validate this case. Signed-off-by:
-
