- 24 Oct, 2016 7 commits
-
-
Henrik Ingo authored
Some devices have invalid baSourceID references, causing uvc_scan_chain() to fail, but if we just take the entities we can find and put them together in the most sensible chain we can think of, turns out they do work anyway. Note: This heuristic assumes there is a single chain. At the time of writing, devices known to have such a broken chain are - Acer Integrated Camera (5986:055a) - Realtek rtl157a7 (0bda:57a7) Signed-off-by:
Henrik Ingo <henrik.ingo@avoinelama.fi> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Instead of using codeblock for the cardlists, use tables, in order to improve their visual when presenting them. Signed-off-by: -
Mauro Carvalho Chehab authored
For those cameras that were missing descriptions, update using some web research: https://cateee.net/lkddb/web-lkddb/USB_GSPCA_STV0680.html https://cateee.net/lkddb/web-lkddb/USB_GSPCA_ZC3XX.html https://cateee.net/lkddb/web-lkddb/USB_GSPCA_KINECT.html https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SPCA561.html https://cateee.net/lkddb/web-lkddb/USB_GSPCA_VICAM.html https://cateee.net/lkddb/web-lkddb/USB_GSPCA_DTCS033.html https://bugs.launchpad.net/ubuntu/+source/linux/+bug/564979 https://cateee.net/lkddb/web-lkddb/USB_GSPCA_PAC7302.html https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SONIXB.html https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SONIXJ.htmlSigned-off-by:
-
Mauro Carvalho Chehab authored
There are several missing USB IDs that are defined on gspca drivers. Add them. The missing entries were found/created using the following script: <script> use strict; use File::Find; my $src = "drivers/media/usb/gspca/"; my $table = 0; my %data; my $id; my $len = 0; open IN, "Documentation/media/v4l-drivers/gspca-cardlist.rst"; while (<IN>) { if (m/^=+\s+=+\s+=+$/) { $table++; next; } next if ($table != 2); if (m/^(\S+)\s+(\S+)\s+(.*)/) { $id = "$1_$2"; $data{$id}->{driver} = $1; $data{$id}->{usb_id} = $2; $data{$id}->{name} = $3; $data{$id}->{valid} = 0; $len = length($3) if (length($3) > $len); } } close IN; sub parse_dir { my $file = $File::Find::name; open IN, $file; my $driver = $file; $driver =~ s,($src),,; $driver =~ s,/.*,,; $driver =~ s,\.c$,,; while (<IN>) { next if (m,/\*.*USB_DEVICE,); if (m/USB_DEVICE[^\(]*\(\s*0x(\S+)\s*\,\s*0x(\S+)\)(.*)/) { my $n = "$1:$2"; my $o = $3; $id = "${driver}_$n"; $data{$id}->{valid} = 1; next if (defined $data{$id}->{driver}); $data{$id}->{driver} = $driver; $data{$id}->{usb_id} = $n; if ($o =~ m,\/\*\s*(.*)\*\/,) { $n = $1; $n =~ s/\s+//; $data{$id}->{name} = $n; } else { $data{$id}->{name} = ""; } } } close IN; } find({wanted => \&parse_dir, no_chdir => 1}, $src); print "The gspca cards list\n"; print "====================\n\n"; print "The modules for the gspca webcam drivers are:\n\n"; print "- gspca_main: main driver\n"; print "- gspca\\_\\ *driver*: subdriver module with *driver* as follows\n\n"; print "========= ========= " . "=" x $len . "\n"; print "*driver* vend:prod Device\n"; print "========= ========= " . "=" x $len . "\n"; foreach my $id (sort { $data{$a}->{usb_id} . $data{$a}->{driver} cmp $data{$b}->{usb_id} . $data{$b}->{driver} } keys %data) { next if (!$data{$id}->{valid}); my $s = sprintf "%-15s %s\t%s\n", $data{$id}->{driver}, $data{$id}->{usb_id}, $data{$id}->{name}; # Replace tabs by spaces $s =~ s/[ \t]+$//; $s =~ s<^ {8}> <\t>; $s =~ s<^ {1,7}\t> <\t>; $s =~ s< {1,7}\t> <\t>; printf $s; } print "========= ========= " . "=" x $len . "\n"; </script> Signed-off-by: -
Mauro Carvalho Chehab authored
Some entries are out of order. While here, clear spaces/tabs. The content remains the same, with the exeption of one duplicated entry from the same driver, where two different brand names share the same entry. The content of such cell was merged, using a comma. Signed-off-by: -
Mauro Carvalho Chehab authored
That makes easier to parse the names, in order to sync it with gspca-cardlist.rst. Signed-off-by: -
Mauro Carvalho Chehab authored
Keeping Documentation/media/v4l-drivers/gspca-cardlist.rst in sync with the gspca script requires a parser. Simplify the commented line, to make the parser work better. Signed-off-by:
-
- 21 Oct, 2016 33 commits
-
-
Laurent Pinchart authored
Support both the HSV24 and HSV32 formats. From a hardware point of view pretend the formats are RGB, the RPF and WPF will just pass the data through without performing any processing. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Ricardo Ribalda Delgado authored
Support HSV encoding. Most of the logic is replicated from ycbcr_enc. Signed-off-by:
-
Ricardo Ribalda Delgado authored
Describe the hsv_enc field and its use. Signed-off-by:
-
Ricardo Ribalda Delgado authored
Some hardware maps the Hue between 0 and 255 instead of 0-179. Support this format with a new field hsv_enc. Signed-off-by:
-
Ricardo Ribalda Delgado authored
Avoid duplicated clamps when possible. Suggested-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Ricardo Ribalda Delgado authored
precalculate_color() had a optimization that avoided duplicated conversion for YUV formats. This optimization did not take into consideration YUV444, YUV555, YUV565 or limited range quantization. This patch keeps the optimization, but fixes the wrong handling. Signed-off-by:
-
Ricardo Ribalda Delgado authored
Simplifies handling of Gray formats. Signed-off-by:
-
Ricardo Ribalda Delgado authored
r_y and g_u now also contain the H and V components on the HSV formats. Rename the variables to reflect this. Signed-off-by:
-
Ricardo Ribalda Delgado authored
This patch adds support for V4L2_PIX_FMT_HSV24 and V4L2_PIX_FMT_HSV32. Signed-off-by:
-
Ricardo Ribalda Delgado authored
Replace is_yuv with color_enc Which can be used by other color encodings such us HSV. This change should ease the review of the following patches. Signed-off-by:
-
Ricardo Ribalda Delgado authored
My initials were on the Changelog, but there was no link to my name. Signed-off-by:
-
Ricardo Ribalda Delgado authored
Describe the HSV formats Signed-off-by:
-
Ricardo Ribalda Delgado authored
These formats store the color information of the image in a geometrical representation. The colors are mapped into a cylinder, where the angle is the HUE, the height is the VALUE and the distance to the center is the SATURATION. This is a very useful format for image segmentation algorithms. Signed-off-by:
-
Sakari Ailus authored
Delay suspending the device by 1000 ms by default. This is done on explicit power off through s_power() callback, through releasing the file descriptor, NVM read or when the probe finishes. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
Switch to runtime PM in sensor power management. The internal power count is thus removed. Signed-off-by:
-
Sakari Ailus authored
Use the suspend and resume ops for freeze, thaw, poweroff and restore callbacks as well. Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Sakari Ailus authored
The dev field of the v4l2_subdev was left NULL for the pixel array and binner sub-devices. Fix this. Signed-off-by:
-
Sakari Ailus authored
Checking that the mutex is not acquired is unnecessary for user processes are stopped by this point. Drop the check. Signed-off-by:
-
Sakari Ailus authored
Don't complain about a failure to compute the pre_pll divisor. The function is used to determine whether a particular combination of bits per sample value and a link frequency can be used, in which case there are lots of unnecessary driver messages. During normal operation the failure generally does not happen. Use dev_dbg() instead. Signed-off-by:
-
Sakari Ailus authored
The first time the sensor is powered on, the information is not yet available. Signed-off-by:
-
Sakari Ailus authored
The media bus code obtained for try format may have been a code that the sensor did not even support. Use a supported code with the current pixel order. Signed-off-by:
-
Sakari Ailus authored
The code probably has been unindented at some point but rewrapping has not been done. Do it now. Also remove a useless memory allocation failure message. Signed-off-by:
-
Sakari Ailus authored
Provide more debugging information on reading the frame layout. Signed-off-by:
-
Sakari Ailus authored
Besides the image data, SMIA++ compliant sensors also provide embedded data in form of registers used to capture the image. Store this information for later use in frame descriptor and routing. Signed-off-by:
-
Sakari Ailus authored
Replace plain value 2 with SMIAPP_PADS when referring to the number of pads. Signed-off-by:
-
Sakari Ailus authored
The initialisation of the source sub-device is somewhat different as it's not created by the smiapp driver itself. Remove redundancy in initialising the two kind of sub-devices. Signed-off-by:
-
Sakari Ailus authored
The information gathered during frame format reading will be required earlier in the initialisation when it was available. Also return an error if frame format cannot be obtained. Signed-off-by:
-
Sakari Ailus authored
The smiapp_probe() is the sole caller of smiapp_init(). Unify the two. Signed-off-by:
-
Sakari Ailus authored
If the registered() callback failed, resources were left unaccounted for. Fix this, as well as add unregistering the sub-devices in driver unregistered() callback. Signed-off-by:
-
Sakari Ailus authored
Initialise the sensor in probe. The reason why it wasn't previously done in case of platform data was that the probe() of the driver that provided the clock through the set_xclk() callback would need to finish before the probe() function of the smiapp driver. The set_xclk() callback no longer exists. Signed-off-by:
-
Sakari Ailus authored
Instead, calculate how much is needed and then allocate the memory dynamically. Signed-off-by:
-
Sakari Ailus authored
The same pixel array size is required for the active format of each sub-device sink pad and try format of each sink pad of each opened file handle as well as for the native size rectangle. Signed-off-by:
-
Sakari Ailus authored
Remove the loop in sub-device registration and create each sub-device explicitly instead. Signed-off-by:
-
