Add spi_device_id tables to avoid logs like "SPI driver ksz9477-switch
has no spi_device_id".
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When iterating over sockets using vsock_for_each_connected_socket, make
sure that a transport filters out sockets that don't belong to the
transport.

There actually was an issue caused by this; in a nested VM
configuration, destroying the nested VM (which often involves the
closing of /dev/vhost-vsock if there was h2g connections to the nested
VM) kills not only the h2g connections, but also all existing g2h
connections to the (outmost) host which are totally unrelated.

Tested: Executed the following steps on Cuttlefish (Android running on a
VM) [1]: (1) Enter into an `adb shell` session - to have a g2h
connection inside the VM, (2) open and then close /dev/vhost-vsock by
`exec 3< /dev/vhost-vsock && exec 3<&-`, (3) observe that the adb
session is not reset.

[1] https://android.googlesource.com/device/google/cuttlefish/

Fixes: c0cfa2d8 ("vsock: add multi-transports support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jiyong Park <jiyong@google.com>
Link: https://lore.kernel.org/r/20220311020017.1509316-1-jiyong@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

alx_reinit has a lockdep assertion that the alx->mtx mutex must be held.
alx_reinit is called from two places: alx_reset and alx_change_mtu.
alx_reset does acquire alx->mtx before calling alx_reinit.
alx_change_mtu does not acquire this mutex, nor do its callers or any
path towards alx_change_mtu.
Acquire the mutex in alx_change_mtu.

The issue was introduced when the fine-grained locking was introduced
to the code to replace the RTNL. The same commit also introduced the
lockdep assertion.

Fixes: 4a5fe57e ("alx: use fine-grained locking instead of RTNL")
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Link: https://lore.kernel.org/r/20220310232707.44251-1-dossche.niels@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Syzbot found a kernel bug in the ipv6 stack:
LINK: https://syzkaller.appspot.com/bug?id=205d6f11d72329ab8d62a610c44c5e7e25415580
The reproducer triggers it by sending a crafted message via sendmmsg()
call, which triggers skb_over_panic, and crashes the kernel:

skbuff: skb_over_panic: text:ffffffff84647fb4 len:65575 put:65575
head:ffff888109ff0000 data:ffff888109ff0088 tail:0x100af end:0xfec0
dev:<NULL>

Update the check that prevents an invalid packet with MTU equal
to the fregment header size to eat up all the space for payload.

The reproducer can be found here:
LINK: https://syzkaller.appspot.com/text?tag=ReproC&x=1648c83fb00000

Reported-by: syzbot+e223cf47ec8ae183f2a0@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220310232538.1044947-1-tadeusz.struk@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, and ipsec.

  Current release - regressions:

   - Bluetooth: fix unbalanced unlock in set_device_flags()

   - Bluetooth: fix not processing all entries on cmd_sync_work, make
     connect with qualcomm and intel adapters reliable

   - Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"

   - xdp: xdp_mem_allocator can be NULL in trace_mem_connect()

   - eth: ice: fix race condition and deadlock during interface enslave

  Current release - new code bugs:

   - tipc: fix incorrect order of state message data sanity check

  Previous releases - regressions:

   - esp: fix possible buffer overflow in ESP transformation

   - dsa: unlock the rtnl_mutex when dsa_master_setup() fails

   - phy: meson-gxl: fix interrupt handling in forced mode

   - smsc95xx: ignore -ENODEV errors when device is unplugged

  Previous releases - always broken:

   - xfrm: fix tunnel mode fragmentation behavior

   - esp: fix inter address family tunneling on GSO

   - tipc: fix null-deref due to race when enabling bearer

   - sctp: fix kernel-infoleak for SCTP sockets

   - eth: macb: fix lost RX packet wakeup race in NAPI receive

   - eth: intel stop disabling VFs due to PF error responses

   - eth: bcmgenet: don't claim WOL when its not available"

* tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
  xdp: xdp_mem_allocator can be NULL in trace_mem_connect().
  ice: Fix race condition during interface enslave
  net: phy: meson-gxl: improve link-up behavior
  net: bcmgenet: Don't claim WOL when its not available
  net: arc_emac: Fix use after free in arc_mdio_probe()
  sctp: fix kernel-infoleak for SCTP sockets
  net: phy: correct spelling error of media in documentation
  net: phy: DP83822: clear MISR2 register to disable interrupts
  gianfar: ethtool: Fix refcount leak in gfar_get_ts_info
  selftests: pmtu.sh: Kill nettest processes launched in subshell.
  selftests: pmtu.sh: Kill tcpdump processes launched by subshell.
  NFC: port100: fix use-after-free in port100_send_complete
  net/mlx5e: SHAMPO, reduce TIR indication
  net/mlx5e: Lag, Only handle events from highest priority multipath entry
  net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
  net/mlx5: Fix a race on command flush flow
  net/mlx5: Fix size field in bufferx_reg struct
  ax25: Fix NULL pointer dereference in ax25_kill_by_device
  net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr
  net: ethernet: lpc_eth: Handle error for clk_enable
  ...

Since the commit mentioned below __xdp_reg_mem_model() can return a NULL
pointer. This pointer is dereferenced in trace_mem_connect() which leads
to segfault.

The trace points (mem_connect + mem_disconnect) were put in place to
pair connect/disconnect using the IDs. The ID is only assigned if
__xdp_reg_mem_model() does not return NULL. That connect trace point is
of no use if there is no ID.

Skip that connect trace point if xdp_alloc is NULL.

[ Toke Høiland-Jørgensen delivered the reasoning for skipping the trace
  point ]

Fixes: 4a48ef70 ("xdp: Allow registering memory model without rxq reference")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/YikmmXsffE+QajTB@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 5dbbbd01 ("ice: Avoid RTNL lock when re-creating
auxiliary device") changes a process of re-creation of aux device
so ice_plug_aux_dev() is called from ice_service_task() context.
This unfortunately opens a race window that can result in dead-lock
when interface has left LAG and immediately enters LAG again.

Reproducer:
```
#!/bin/sh

ip link add lag0 type bond mode 1 miimon 100
ip link set lag0

for n in {1..10}; do
        echo Cycle: $n
        ip link set ens7f0 master lag0
        sleep 1
        ip link set ens7f0 nomaster
done
```

This results in:
[20976.208697] Workqueue: ice ice_service_task [ice]
[20976.213422] Call Trace:
[20976.215871]  __schedule+0x2d1/0x830
[20976.219364]  schedule+0x35/0xa0
[20976.222510]  schedule_preempt_disabled+0xa/0x10
[20976.227043]  __mutex_lock.isra.7+0x310/0x420
[20976.235071]  enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core]
[20976.251215]  ib_enum_roce_netdev+0xa4/0xe0 [ib_core]
[20976.256192]  ib_cache_setup_one+0x33/0xa0 [ib_core]
[20976.261079]  ib_register_device+0x40d/0x580 [ib_core]
[20976.266139]  irdma_ib_register_device+0x129/0x250 [irdma]
[20976.281409]  irdma_probe+0x2c1/0x360 [irdma]
[20976.285691]  auxiliary_bus_probe+0x45/0x70
[20976.289790]  really_probe+0x1f2/0x480
[20976.298509]  driver_probe_device+0x49/0xc0
[20976.302609]  bus_for_each_drv+0x79/0xc0
[20976.306448]  __device_attach+0xdc/0x160
[20976.310286]  bus_probe_device+0x9d/0xb0
[20976.314128]  device_add+0x43c/0x890
[20976.321287]  __auxiliary_device_add+0x43/0x60
[20976.325644]  ice_plug_aux_dev+0xb2/0x100 [ice]
[20976.330109]  ice_service_task+0xd0c/0xed0 [ice]
[20976.342591]  process_one_work+0x1a7/0x360
[20976.350536]  worker_thread+0x30/0x390
[20976.358128]  kthread+0x10a/0x120
[20976.365547]  ret_from_fork+0x1f/0x40
...
[20976.438030] task:ip              state:D stack:    0 pid:213658 ppid:213627 flags:0x00004084
[20976.446469] Call Trace:
[20976.448921]  __schedule+0x2d1/0x830
[20976.452414]  schedule+0x35/0xa0
[20976.455559]  schedule_preempt_disabled+0xa/0x10
[20976.460090]  __mutex_lock.isra.7+0x310/0x420
[20976.464364]  device_del+0x36/0x3c0
[20976.467772]  ice_unplug_aux_dev+0x1a/0x40 [ice]
[20976.472313]  ice_lag_event_handler+0x2a2/0x520 [ice]
[20976.477288]  notifier_call_chain+0x47/0x70
[20976.481386]  __netdev_upper_dev_link+0x18b/0x280
[20976.489845]  bond_enslave+0xe05/0x1790 [bonding]
[20976.494475]  do_setlink+0x336/0xf50
[20976.502517]  __rtnl_newlink+0x529/0x8b0
[20976.543441]  rtnl_newlink+0x43/0x60
[20976.546934]  rtnetlink_rcv_msg+0x2b1/0x360
[20976.559238]  netlink_rcv_skb+0x4c/0x120
[20976.563079]  netlink_unicast+0x196/0x230
[20976.567005]  netlink_sendmsg+0x204/0x3d0
[20976.570930]  sock_sendmsg+0x4c/0x50
[20976.574423]  ____sys_sendmsg+0x1eb/0x250
[20976.586807]  ___sys_sendmsg+0x7c/0xc0
[20976.606353]  __sys_sendmsg+0x57/0xa0
[20976.609930]  do_syscall_64+0x5b/0x1a0
[20976.613598]  entry_SYSCALL_64_after_hwframe+0x65/0xca

1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev()
   is called from ice_service_task() context, aux device is created
   and associated device->lock is taken.
2. Command 'ip link ... set master...' calls ice's notifier under
   RTNL lock and that notifier calls ice_unplug_aux_dev(). That
   function tries to take aux device->lock but this is already taken
   by ice_plug_aux_dev() in step 1
3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already
   taken in step 2
4. Dead-lock

The patch fixes this issue by following changes:
- Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev()
  call in ice_service_task()
- The bit is checked in ice_clear_rdma_cap() and only if it is not set
  then ice_unplug_aux_dev() is called. If it is set (in other words
  plugging of aux device was requested and ice_plug_aux_dev() is
  potentially running) then the function only clears the bit
- Once ice_plug_aux_dev() call (in ice_service_task) is finished
  the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked
  whether it was already cleared by ice_clear_rdma_cap(). If so then
  aux device is unplugged.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Co-developed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Link: https://lore.kernel.org/r/20220310171641.3863659-1-ivecera@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sometimes the link comes up but no data flows. This patch fixes
this behavior. It's not clear what's the root cause of the issue.

According to the tests one other link-up issue remains.
In very rare cases the link isn't even reported as up.

Fixes: 84c8f773 ("net: phy: meson-gxl: remove the use of .ack_callback()")
Tested-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some of the bcmgenet platforms don't correctly support WOL, yet
ethtool returns:

"Supports Wake-on: gsf"

which is false.

Ideally if there isn't a wol_irq, or there is something else that
keeps the device from being able to wakeup it should display:

"Supports Wake-on: d"

This patch checks whether the device can wakup, before using the
hard-coded supported flags. This corrects the ethtool reporting, as
well as the WOL configuration because ethtool verifies that the mode
is supported before attempting it.

Fixes: c51de7f3 ("net: bcmgenet: add Wake-on-LAN support code")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free
the "bus". But bus->name is still used in the next line, which will lead
to a use after free.

We can fix it by putting the name in a local variable and make the
bus->name point to the rodata section "name",then use the name in the
error message without referring to bus to avoid the uaf.

Fixes: 95b5fc03 ("net: arc_emac: Make use of the helper function dev_err_probe()")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Link: https://lore.kernel.org/r/20220309121824.36529-1-niejianglei2021@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reported a kernel infoleak [1] of 4 bytes.

After analysis, it turned out r->idiag_expires is not initialized
if inet_sctp_diag_fill() calls inet_diag_msg_common_fill()

Make sure to clear idiag_timer/idiag_retrans/idiag_expires
and let inet_diag_msg_sctpasoc_fill() fill them again if needed.

[1]

BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
 instrument_copy_to_user include/linux/instrumented.h:121 [inline]
 copyout lib/iov_iter.c:154 [inline]
 _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
 copy_to_iter include/linux/uio.h:162 [inline]
 simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
 __skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425
 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
 skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline]
 netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 __sys_recvfrom+0x795/0xa10 net/socket.c:2097
 __do_sys_recvfrom net/socket.c:2115 [inline]
 __se_sys_recvfrom net/socket.c:2111 [inline]
 __x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:737 [inline]
 slab_alloc_node mm/slub.c:3247 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1158 [inline]
 netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248
 __netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373
 netlink_dump_start include/linux/netlink.h:254 [inline]
 inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341
 sock_diag_rcv_msg+0x24a/0x620
 netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494
 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 sock_write_iter+0x594/0x690 net/socket.c:1061
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_write+0x52c/0x1500 fs/read_write.c:851
 vfs_writev fs/read_write.c:924 [inline]
 do_writev+0x645/0xe00 fs/read_write.c:967
 __do_sys_writev fs/read_write.c:1040 [inline]
 __se_sys_writev fs/read_write.c:1037 [inline]
 __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Bytes 68-71 of 2508 are uninitialized
Memory access of size 2508 starts at ffff888114f9b000
Data copied to user address 00007f7fe09ff2e0

CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 8f840e47 ("sctp: add the sctp_diag.c file")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20220310001145.297371-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The header file incorrectly referenced "median-independant interface"
instead of media. Correct this typo.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Fixes: 4069a572 ("net: phy: Document core PHY structures")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220309062544.3073-1-colin.foster@in-advantage.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5 fixes 2022-03-09

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: SHAMPO, reduce TIR indication
  net/mlx5e: Lag, Only handle events from highest priority multipath entry
  net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
  net/mlx5: Fix a race on command flush flow
  net/mlx5: Fix size field in bufferx_reg struct
====================

Link: https://lore.kernel.org/r/20220309201517.589132-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull block fix from Jens Axboe:
 "Just a single fix for a regression that occured in this merge window"

* tag 'block-5.17-2022-03-10' of git://git.kernel.dk/linux-block:
  block: fix blk_mq_attempt_bio_merge and rq_qos_throttle protection

Pull staging driver fixes from Greg KH:
 "Here are three small fixes for staging drivers for 5.17-rc8 or -final,
  which ever comes next.

  They resolve some reported problems:

   - rtl8723bs wifi driver deadlock fix for reported problem that is a
     revert of a previous patch. Also a documentation fix is added so
     that the same problem hopefully can not come back again.

   - gdm724x driver use-after-free fix for a reported problem.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'staging-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8723bs: Improve the comment explaining the locking rules
  staging: rtl8723bs: Fix access-point mode deadlock
  staging: gdm724x: fix use after free in gdm_lte_rx()

MISR1 was cleared twice but the original author intention was probably
to clear MISR1 & MISR2 to completely disable interrupts. Fix it to
clear MISR2.

Fixes: 87461f7a ("net: phy: DP83822 initial driver submission")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.

Fixes: 7349a74e ("net: ethernet: gianfar_ethtool: get phc index through drvdata")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220310015313.14938-1-linmq006@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "Here is a third set of fixes for the soc tree, well within the
  expected set of changes.

  Maintainer list changes:
   - Krzysztof Kozlowski and Jisheng Zhang both have new email addresses
   - Broadcom iProc has a new git tree

  Regressions:
   - Robert Foss sends a revert for a Mediatek DPI bridge patch that
     caused an inadvertent break in the DT binding
   - mstar timers need to be included in Kconfig

  Devicetree fixes for:
   - Aspeed ast2600 spi pinmux
   - Tegra eDP panels on Nyan FHD
   - Tegra display IOMMU
   - Qualcomm sm8350 UFS clocks
   - minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm
     sm8450, and Broadcom BCM2711"

* tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
  MAINTAINERS: Update Jisheng's email address
  Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint"
  dt-bindings: drm/bridge: anx7625: Revert DPI support
  ARM: dts: aspeed: Fix AST2600 quad spi group
  MAINTAINERS: update Krzysztof Kozlowski's email
  MAINTAINERS: Update git tree for Broadcom iProc SoCs
  ARM: tegra: Move Nyan FHD panels to AUX bus
  arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias
  ARM: mstar: Select HAVE_ARM_ARCH_TIMER
  soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel
  arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint
  ARM: boot: dts: bcm2711: Fix HVS register range
  arm64: dts: qcom: c630: disable crypto due to serror
  arm64: dts: qcom: sm8450: fix apps_smmu interrupts
  arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb
  arm64: dts: qcom: sm8350: Correct UFS symbol clocks
  arm64: tegra: Disable ISO SMMU for Tegra194
  Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"

Instead of using GUP, make fault_in_safe_writeable() actually force a
'handle_mm_fault()' using the same fixup_user_fault() machinery that
futexes already use.

Using the GUP machinery meant that fault_in_safe_writeable() did not do
everything that a real fault would do, ranging from not auto-expanding
the stack segment, to not updating accessed or dirty flags in the page
tables (GUP sets those flags on the pages themselves).

The latter causes problems on architectures (like s390) that do accessed
bit handling in software, which meant that fault_in_safe_writeable()
didn't actually do all the fault handling it needed to, and trying to
access the user address afterwards would still cause faults.
Reported-and-tested-by: Andreas Gruenbacher <agruenba@redhat.com>
Fixes: cdd591fc ("iov_iter: Introduce fault_in_iov_iter_writeable")
Link: https://lore.kernel.org/all/CAHc6FU5nP+nziNGG0JAF1FUx-GV7kKFvM7aZuU_XD2_1v4vnvg@mail.gmail.com/Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mvebu-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes

mvebu fixes for 5.17 (part 2)

Allow using old PCIe card on Armada 37xx

* tag 'mvebu-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0

Link: https://lore.kernel.org/r/87bkydj4fn.fsf@BL-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Legacy and old PCI I/O based cards do not support 32-bit I/O addressing.

Since commit 64f160e1 ("PCI: aardvark: Configure PCIe resources from
'ranges' DT property") kernel can set different PCIe address on CPU and
different on the bus for the one A37xx address mapping without any firmware
support in case the bus address does not conflict with other A37xx mapping.

So remap I/O space to the bus address 0x0 to enable support for old legacy
I/O port based cards which have hardcoded I/O ports in low address space.

Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O
space can be set to address 0x0 too because MEM space and I/O space are
separate and so do not conflict.

Remapping IO space on Turris Mox to different address is not possible to
due bootloader bug.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 76f6386b ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Cc: stable@vger.kernel.org # 64f160e1 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property")
Cc: stable@vger.kernel.org # 514ef1e6 ("arm64: dts: marvell: armada-37xx: Extend PCIe MEM space")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Pull spi fix from Mark Brown:
 "One fix for type conversion issues when working out maximum
  scatter/gather segment sizes.

  It caused problems for some systems where the limits overflow
  due to the type conversion"

* tag 'spi-fix-v5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Fix invalid sgs value

The kernel test robot discovered that building without
HARDEN_BRANCH_PREDICTOR issues a warning due to a missing
argument to pr_info().

Add the missing argument.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9dd78194 ("ARM: report Spectre v2 status through sysfs")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull gpio fixes from Bartosz Golaszewski:

 - fix a probe failure for Tegra241 GPIO controller in gpio-tegra186

 - revert changes that caused a regression in the sysfs user-space
   interface

 - correct the debounce time conversion in GPIO ACPI

 - statify a struct in gpio-sim and fix a typo

 - update registers in correct order (hardware quirk) in gpio-ts4900

* tag 'gpio-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: sim: fix a typo
  gpio: ts4900: Do not set DAT and OE together
  gpio: sim: Declare gpio_sim_hog_config_item_ops static
  gpiolib: acpi: Convert ACPI value of debounce to microseconds
  gpio: Revert regression in sysfs-gpio (gpiolib.c)
  gpio: tegra186: Add IRQ per bank for Tegra241

Just noticed this when applying Andy's patch. s/childred/children/

Fixes: cb8c474e ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This works around an issue with the hardware where both OE and
DAT are exposed in the same register. If both are updated
simultaneously, the harware makes no guarantees that OE or DAT
will actually change in any given order and may result in a
glitch of a few ns on a GPIO pin when changing direction and value
in a single write.

Setting direction to input now only affects OE bit. Setting
direction to output updates DAT first, then OE.

Fixes: 9c668632 ("gpio: add Technologic I2C-FPGA gpio support")
Signed-off-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Pull clk fixes from Stephen Boyd:
 "One more small batch of clk driver fixes:

   - A fix for the Qualcomm GDSC power domain delays that avoids black
     screens at boot on some more recent SoCs that use a different delay
     than the hard-coded delays in the driver.

   - A build fix LAN966X clk driver that let it be built on
     architectures that didn't have IOMEM"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: lan966x: Fix linking error
  clk: qcom: dispcc: Update the transition delay for MDSS GDSC
  clk: qcom: gdsc: Add support to update GDSC transition delay

Pull xen fixes from Juergen Gross:
 "Several Linux PV device frontends are using the grant table interfaces
  for removing access rights of the backends in ways being subject to
  race conditions, resulting in potential data leaks, data corruption by
  malicious backends, and denial of service triggered by malicious
  backends:

   - blkfront, netfront, scsifront and the gntalloc driver are testing
     whether a grant reference is still in use. If this is not the case,
     they assume that a following removal of the granted access will
     always succeed, which is not true in case the backend has mapped
     the granted page between those two operations.

     As a result the backend can keep access to the memory page of the
     guest no matter how the page will be used after the frontend I/O
     has finished. The xenbus driver has a similar problem, as it
     doesn't check the success of removing the granted access of a
     shared ring buffer.

   - blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p,
     kbdfront, and pvcalls are using a functionality to delay freeing a
     grant reference until it is no longer in use, but the freeing of
     the related data page is not synchronized with dropping the granted
     access.

     As a result the backend can keep access to the memory page even
     after it has been freed and then re-used for a different purpose.

   - netfront will fail a BUG_ON() assertion if it fails to revoke
     access in the rx path.

     This will result in a Denial of Service (DoS) situation of the
     guest which can be triggered by the backend"

* tag 'xsa396-5.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/netfront: react properly to failing gnttab_end_foreign_access_ref()
  xen/gnttab: fix gnttab_end_foreign_access() without page specified
  xen/pvcalls: use alloc/free_pages_exact()
  xen/9p: use alloc/free_pages_exact()
  xen/usb: don't use gnttab_end_foreign_access() in xenhcd_gnttab_done()
  xen: remove gnttab_query_foreign_access()
  xen/gntalloc: don't use gnttab_query_foreign_access()
  xen/scsifront: don't use gnttab_query_foreign_access() for mapped status
  xen/netfront: don't use gnttab_query_foreign_access() for mapped status
  xen/blkfront: don't use gnttab_query_foreign_access() for mapped status
  xen/grant-table: add gnttab_try_end_foreign_access()
  xen/xenbus: don't let xenbus_grant_ring() remove grants in error case

Guillaume Nault says:

====================
selftests: pmtu.sh: Fix cleanup of processes launched in subshell.

Depending on the options used, pmtu.sh may launch tcpdump and nettest
processes in the background. However it fails to clean them up after
the tests complete.

Patch 1 allows the cleanup() function to read the list of PIDs launched
by the tests.
Patch 2 fixes the way the nettest PIDs are retrieved.
====================

Link: https://lore.kernel.org/r/cover.1646776561.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When using "run_cmd <command> &", then "$!" refers to the PID of the
subshell used to run <command>, not the command itself. Therefore
nettest_pids actually doesn't contain the list of the nettest commands
running in the background. So cleanup() can't kill them and the nettest
processes run until completion (fortunately they have a 5s timeout).

Fix this by defining a new command for running processes in the
background, for which "$!" really refers to the PID of the command run.

Also, double quote variables on the modified lines, to avoid shellcheck
warnings.

Fixes: ece1278a ("selftests: net: add ESP-in-UDP PMTU test")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The cleanup() function takes care of killing processes launched by the
test functions. It relies on variables like ${tcpdump_pids} to get the
relevant PIDs. But tests are run in their own subshell, so updated
*_pids values are invisible to other shells. Therefore cleanup() never
sees any process to kill:

$ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception
TEST: ipv4: PMTU exceptions                                         [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects                       [ OK ]

$ pgrep -af tcpdump
6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap

Fix this by running cleanup() in the context of the test subshell.
Now that each test cleans the environment after completion, there's no
need for calling cleanup() again when the next test starts. So let's
drop it from the setup() function. This is okay because cleanup() is
also called when pmtu.sh starts, so even the first test starts in a
clean environment.

Also, use tcpdump's immediate mode. Otherwise it might not have time to
process buffered packets, resulting in missing packets or even empty
pcap files for short tests.

Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can
still inspect the test environment upon failure when using -p.

Fixes: a92a0a7b ("selftests: pmtu: Simplify cleanup and namespace names")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Syzbot reported UAF in port100_send_complete(). The root case is in
missing usb_kill_urb() calls on error handling path of ->probe function.

port100_send_complete() accesses devm allocated memory which will be
freed on probe failure. We should kill this urbs before returning an
error from probe function to prevent reported use-after-free

Fail log:

BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26
...
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
 port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
 __usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670

...

Allocated by task 1255:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:45 [inline]
 set_alloc_info mm/kasan/common.c:436 [inline]
 ____kasan_kmalloc mm/kasan/common.c:515 [inline]
 ____kasan_kmalloc mm/kasan/common.c:474 [inline]
 __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524
 alloc_dr drivers/base/devres.c:116 [inline]
 devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823
 devm_kzalloc include/linux/device.h:209 [inline]
 port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502

Freed by task 1255:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track+0x21/0x30 mm/kasan/common.c:45
 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
 ____kasan_slab_free mm/kasan/common.c:366 [inline]
 ____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328
 kasan_slab_free include/linux/kasan.h:236 [inline]
 __cache_free mm/slab.c:3437 [inline]
 kfree+0xf8/0x2b0 mm/slab.c:3794
 release_nodes+0x112/0x1a0 drivers/base/devres.c:501
 devres_release_all+0x114/0x190 drivers/base/devres.c:530
 really_probe+0x626/0xcc0 drivers/base/dd.c:670

Reported-and-tested-by: syzbot+16bcb127fb73baeecb14@syzkaller.appspotmail.com
Fixes: 0347a6ab ("NFC: port100: Commands mechanism implementation")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308185007.6987-1-paskripkin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull arm64 build fix from Catalin Marinas:
 "Fix kernel build with clang LTO after the inclusion of the Spectre BHB
  arm64 mitigations"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Do not include __READ_ONCE() block in assembly files

ld.lld does not support the NOCROSSREFS directive at the moment, which
breaks the build after commit b9baf5c8 ("ARM: Spectre-BHB
workaround"):

  ld.lld: error: ./arch/arm/kernel/vmlinux.lds:34: AT expected, but got NOCROSSREFS

Support for this directive will eventually be implemented, at which
point a version check can be added. To avoid breaking the build in the
meantime, just define NOCROSSREFS to nothing when using ld.lld, with a
link to the issue for tracking.

Cc: stable@vger.kernel.org
Fixes: b9baf5c8 ("ARM: Spectre-BHB workaround")
Link: https://github.com/ClangBuiltLinux/linux/issues/1609Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When building arm64 defconfig + CONFIG_LTO_CLANG_{FULL,THIN}=y after
commit 558c303c ("arm64: Mitigate spectre style branch history side
channels"), the following error occurs:

  <instantiation>:4:2: error: invalid fixup for movz/movk instruction
   mov w0, #ARM_SMCCC_ARCH_WORKAROUND_3
   ^

Marc figured out that moving "#include <linux/init.h>" in
include/linux/arm-smccc.h into a !__ASSEMBLY__ block resolves it. The
full include chain with CONFIG_LTO=y from include/linux/arm-smccc.h:

include/linux/init.h
include/linux/compiler.h
arch/arm64/include/asm/rwonce.h
arch/arm64/include/asm/alternative-macros.h
arch/arm64/include/asm/assembler.h

The asm/alternative-macros.h include in asm/rwonce.h only happens when
CONFIG_LTO is set, which ultimately casues asm/assembler.h to be
included before the definition of ARM_SMCCC_ARCH_WORKAROUND_3. As a
result, the preprocessor does not expand ARM_SMCCC_ARCH_WORKAROUND_3 in
__mitigate_spectre_bhb_fw, which results in the error above.

Avoid this problem by just avoiding the CONFIG_LTO=y __READ_ONCE() block
in asm/rwonce.h with assembly files, as nothing in that block is useful
to assembly files, which allows ARM_SMCCC_ARCH_WORKAROUND_3 to be
properly expanded with CONFIG_LTO=y builds.

Fixes: e35123d8 ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y")
Cc: <stable@vger.kernel.org> # 5.11.x
Link: https://lore.kernel.org/r/20220309155716.3988480-1-maz@kernel.org/Reported-by: Marc Zyngier <maz@kernel.org>
Acked-by: James Morse <james.morse@arm.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220309191633.2307110-1-nathan@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull HID fixes from Jiri Kosina:

 - sysfs attributes leak fix for Google Vivaldi driver (Dmitry Torokhov)

 - fix for potential out-of-bounds read in Thrustmaster driver (Pavel
   Skripkin)

 - error handling reference leak in Elo driver (Jiri Kosina)

 - a few new device IDs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: nintendo: check the return value of alloc_workqueue()
  HID: vivaldi: fix sysfs attributes leak
  HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts
  HID: elo: Revert USB reference counting
  HID: Add support for open wheel and no attachment to T300
  HID: logitech-dj: add new lightspeed receiver id

Pull arm64 fixes from Catalin Marinas:

 - Fix compilation of eBPF object files that indirectly include
   mte-kasan.h.

 - Fix test for execute-only permissions with EPAN (Enhanced Privileged
   Access Never, ARMv8.7 feature).

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kasan: fix include error in MTE functions
  arm64: Ensure execute-only permissions are not allowed without EPAN

In the recent Spectre BHB patches, there was a typo that is only
exposed in certain configurations: mcr p15,0,XX,c7,r5,4 should have
been mcr p15,0,XX,c7,c5,4
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b9baf5c8 ("ARM: Spectre-BHB workaround")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SHAMPO is an RQ / WQ feature, an indication was added to the TIR in the
first place to enforce suitability between connected TIR and RQ, this
enforcement does not exist in current the Firmware implementation and was
redundant in the first place.

Fixes: 83439f3c ("net/mlx5e: Add HW-GRO offload")
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

There could be multiple multipath entries but changing the port affinity
for each one doesn't make much sense and there should be a default one.
So only track the entry with lowest priority value.
The commit doesn't affect existing users with a single entry.

Fixes: 544fe7c2 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>