- 25 May, 2017 22 commits
-
-
Wanpeng Li authored
commit a575813b upstream. Reported by syzkaller: BUG: unable to handle kernel paging request at ffffffffc07f6a2e IP: report_bug+0x94/0x120 PGD 348e12067 P4D 348e12067 PUD 348e14067 PMD 3cbd84067 PTE 80000003f7e87161 Oops: 0003 [#1] SMP CPU: 2 PID: 7091 Comm: kvm_load_guest_ Tainted: G OE 4.11.0+ #8 task: ffff92fdfb525400 task.stack: ffffbda6c3d04000 RIP: 0010:report_bug+0x94/0x120 RSP: 0018:ffffbda6c3d07b20 EFLAGS: 00010202 do_trap+0x156/0x170 do_error_trap+0xa3/0x170 ? kvm_load_guest_fpu.part.175+0x12a/0x170 [kvm] ? mark_held_locks+0x79/0xa0 ? retint_kernel+0x10/0x10 ? trace_hardirqs_off_thunk+0x1a/0x1c do_invalid_op+0x20/0x30 invalid_op+0x1e/0x30 RIP: 0010:kvm_load_guest_fpu.part.175+0x12a/0x170 [kvm] ? kvm_load_guest_fpu.part.175+0x1c/0x170 [kvm] kvm_arch_vcpu_ioctl_run+0xed6/0x1b70 [kvm] kvm_vcpu_ioctl+0x384/0x780 [kvm] ? kvm_vcpu_ioctl+0x384/0x780 [kvm] ? sched_clock+0x13/0x20 ? __do_page_fault+0x2a0/0x550 do_vfs_ioctl+0xa4/0x700 ? up_read+0x1f/0x40 ? __do_page_fault+0x2a0/0x550 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc2 SDM mentioned that "The MXCSR has several reserved bits, and attempting to write a 1 to any of these bits will cause a general-protection exception(#GP) to be generated". The syzkaller forks' testcase overrides xsave area w/ random values and steps on the reserved bits of MXCSR register. The damaged MXCSR register values of guest will be restored to SSEx MXCSR register before vmentry. This patch fixes it by catching userspace override MXCSR register reserved bits w/ random values and bails out immediately. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Glöckner authored
commit 1ac202e9 upstream. Modifying the attributes of a file makes ima_inode_post_setattr reset the IMA cache flags. So if the file, which has just been created, is opened a second time before the first file descriptor is closed, verification fails since the security.ima xattr has not been written yet. We therefore have to look at the IMA_NEW_FILE even if the file already existed. With this patch there should no longer be an error when cat tries to open testfile: $ rm -f testfile $ ( echo test >&3 ; touch testfile ; cat testfile ) 3>testfile A file being new is no reason to accept that it is missing a digital signature demanded by the policy. Signed-off-by:
Daniel Glöckner <dg@emlix.com> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Brian Norris authored
commit 3c8cb9ad upstream. Command buffers (skb's) are allocated by the main driver, and freed upon the last use. That last use is often in mwifiex_free_cmd_buffer(). In the meantime, if the command buffer gets used by the PCI driver, we map it as DMA-able, and store the mapping information in the 'cb' memory. However, if a command was in-flight when resetting the device (and therefore was still mapped), we don't get a chance to unmap this memory until after the core has cleaned up its command handling. Let's keep a refcount within the PCI driver, so we ensure the memory only gets freed after we've finished unmapping it. Noticed by KASAN when forcing a reset via: echo 1 > /sys/bus/pci/.../reset The same code path can presumably be exercised in remove() and shutdown(). [ 205.390377] mwifiex_pcie 0000:01:00.0: info: shutdown mwifiex... [ 205.400393] ================================================================== [ 205.407719] BUG: KASAN: use-after-free in mwifiex_unmap_pci_memory.isra.14+0x4c/0x100 [mwifiex_pcie] at addr ffffffc0ad471b28 [ 205.419040] Read of size 16 by task bash/1913 [ 205.423421] ============================================================================= [ 205.431625] BUG skbuff_head_cache (Tainted: G B ): kasan: bad access detected [ 205.439815] ----------------------------------------------------------------------------- [ 205.439815] [ 205.449534] INFO: Allocated in __build_skb+0x48/0x114 age=1311 cpu=4 pid=1913 [ 205.456709] alloc_debug_processing+0x124/0x178 [ 205.461282] ___slab_alloc.constprop.58+0x528/0x608 [ 205.466196] __slab_alloc.isra.54.constprop.57+0x44/0x54 [ 205.471542] kmem_cache_alloc+0xcc/0x278 [ 205.475497] __build_skb+0x48/0x114 [ 205.479019] __netdev_alloc_skb+0xe0/0x170 [ 205.483244] mwifiex_alloc_cmd_buffer+0x68/0xdc [mwifiex] [ 205.488759] mwifiex_init_fw+0x40/0x6cc [mwifiex] [ 205.493584] _mwifiex_fw_dpc+0x158/0x520 [mwifiex] [ 205.498491] mwifiex_reinit_sw+0x2c4/0x398 [mwifiex] [ 205.503510] mwifiex_pcie_reset_notify+0x114/0x15c [mwifiex_pcie] [ 205.509643] pci_reset_notify+0x5c/0x6c [ 205.513519] pci_reset_function+0x6c/0x7c [ 205.517567] reset_store+0x68/0x98 [ 205.521003] dev_attr_store+0x54/0x60 [ 205.524705] sysfs_kf_write+0x9c/0xb0 [ 205.528413] INFO: Freed in __kfree_skb+0xb0/0xbc age=131 cpu=4 pid=1913 [ 205.535064] free_debug_processing+0x264/0x370 [ 205.539550] __slab_free+0x84/0x40c [ 205.543075] kmem_cache_free+0x1c8/0x2a0 [ 205.547030] __kfree_skb+0xb0/0xbc [ 205.550465] consume_skb+0x164/0x178 [ 205.554079] __dev_kfree_skb_any+0x58/0x64 [ 205.558304] mwifiex_free_cmd_buffer+0xa0/0x158 [mwifiex] [ 205.563817] mwifiex_shutdown_drv+0x578/0x5c4 [mwifiex] [ 205.569164] mwifiex_shutdown_sw+0x178/0x310 [mwifiex] [ 205.574353] mwifiex_pcie_reset_notify+0xd4/0x15c [mwifiex_pcie] [ 205.580398] pci_reset_notify+0x5c/0x6c [ 205.584274] pci_dev_save_and_disable+0x24/0x6c [ 205.588837] pci_reset_function+0x30/0x7c [ 205.592885] reset_store+0x68/0x98 [ 205.596324] dev_attr_store+0x54/0x60 [ 205.600017] sysfs_kf_write+0x9c/0xb0 ... [ 205.800488] Call trace: [ 205.802980] [<ffffffc00020a69c>] dump_backtrace+0x0/0x190 [ 205.808415] [<ffffffc00020a96c>] show_stack+0x20/0x28 [ 205.813506] [<ffffffc0005d020c>] dump_stack+0xa4/0xcc [ 205.818598] [<ffffffc0003be44c>] print_trailer+0x158/0x168 [ 205.824120] [<ffffffc0003be5f0>] object_err+0x4c/0x5c [ 205.829210] [<ffffffc0003c45bc>] kasan_report+0x334/0x500 [ 205.834641] [<ffffffc0003c3994>] check_memory_region+0x20/0x14c [ 205.840593] [<ffffffc0003c3b14>] __asan_loadN+0x14/0x1c [ 205.845879] [<ffffffbffc46171c>] mwifiex_unmap_pci_memory.isra.14+0x4c/0x100 [mwifiex_pcie] [ 205.854282] [<ffffffbffc461864>] mwifiex_pcie_delete_cmdrsp_buf+0x94/0xa8 [mwifiex_pcie] [ 205.862421] [<ffffffbffc462028>] mwifiex_pcie_free_buffers+0x11c/0x158 [mwifiex_pcie] [ 205.870302] [<ffffffbffc4620d4>] mwifiex_pcie_down_dev+0x70/0x80 [mwifiex_pcie] [ 205.877736] [<ffffffbffc1397a8>] mwifiex_shutdown_sw+0x190/0x310 [mwifiex] [ 205.884658] [<ffffffbffc4606b4>] mwifiex_pcie_reset_notify+0xd4/0x15c [mwifiex_pcie] [ 205.892446] [<ffffffc000635f54>] pci_reset_notify+0x5c/0x6c [ 205.898048] [<ffffffc00063a044>] pci_dev_save_and_disable+0x24/0x6c [ 205.904350] [<ffffffc00063cf0c>] pci_reset_function+0x30/0x7c [ 205.910134] [<ffffffc000641118>] reset_store+0x68/0x98 [ 205.915312] [<ffffffc000771588>] dev_attr_store+0x54/0x60 [ 205.920750] [<ffffffc00046f53c>] sysfs_kf_write+0x9c/0xb0 [ 205.926182] [<ffffffc00046dfb0>] kernfs_fop_write+0x184/0x1f8 [ 205.931963] [<ffffffc0003d64f4>] __vfs_write+0x6c/0x17c [ 205.937221] [<ffffffc0003d7164>] vfs_write+0xf0/0x1c4 [ 205.942310] [<ffffffc0003d7da0>] SyS_write+0x78/0xd8 [ 205.947312] [<ffffffc000204634>] el0_svc_naked+0x24/0x28 ... [ 205.998268] ================================================================== This bug has been around in different forms for a while. It was sort of noticed in commit 955ab095 ("mwifiex: Do not kfree cmd buf while unregistering PCIe"), but it just fixed the double-free, without acknowledging the potential for use-after-free. Fixes: fc331460 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe") Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Larry Finger authored
commit 46cfa214 upstream. Current channel switch implementation sets 8812ae RFE reg value assuming that device always has type 2. Extend possible RFE types set and write corresponding reg values. Source for new code is http://dlcdnet.asus.com/pub/ASUS/wireless/PCE-AC51/DR_PCE_AC51_20232801152016.zipSigned-off-by:
Maxim Samoylov <max7255@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
-
Dennis Yang authored
commit 583da48e upstream. When growing raid5 device on machine with small memory, there is chance that mdadm will be killed and the following bug report can be observed. The same bug could also be reproduced in linux-4.10.6. [57600.075774] BUG: unable to handle kernel NULL pointer dereference at (null) [57600.083796] IP: [<ffffffff81a6aa87>] _raw_spin_lock+0x7/0x20 [57600.110378] PGD 421cf067 PUD 4442d067 PMD 0 [57600.114678] Oops: 0002 [#1] SMP [57600.180799] CPU: 1 PID: 25990 Comm: mdadm Tainted: P O 4.2.8 #1 [57600.187849] Hardware name: To be filled by O.E.M. To be filled by O.E.M./MAHOBAY, BIOS QV05AR66 03/06/2013 [57600.197490] task: ffff880044e47240 ti: ffff880043070000 task.ti: ffff880043070000 [57600.204963] RIP: 0010:[<ffffffff81a6aa87>] [<ffffffff81a6aa87>] _raw_spin_lock+0x7/0x20 [57600.213057] RSP: 0018:ffff880043073810 EFLAGS: 00010046 [57600.218359] RAX: 0000000000000000 RBX: 000000000000000c RCX: ffff88011e296dd0 [57600.225486] RDX: 0000000000000001 RSI: ffffe8ffffcb46c0 RDI: 0000000000000000 [57600.232613] RBP: ffff880043073878 R08: ffff88011e5f8170 R09: 0000000000000282 [57600.239739] R10: 0000000000000005 R11: 28f5c28f5c28f5c3 R12: ffff880043073838 [57600.246872] R13: ffffe8ffffcb46c0 R14: 0000000000000000 R15: ffff8800b9706a00 [57600.253999] FS: 00007f576106c700(0000) GS:ffff88011e280000(0000) knlGS:0000000000000000 [57600.262078] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [57600.267817] CR2: 0000000000000000 CR3: 00000000428fe000 CR4: 00000000001406e0 [57600.274942] Stack: [57600.276949] ffffffff8114ee35 ffff880043073868 0000000000000282 000000000000eb3f [57600.284383] ffffffff81119043 ffff880043073838 ffff880043073838 ffff88003e197b98 [57600.291820] ffffe8ffffcb46c0 ffff88003e197360 0000000000000286 ffff880043073968 [57600.299254] Call Trace: [57600.301698] [<ffffffff8114ee35>] ? cache_flusharray+0x35/0xe0 [57600.307523] [<ffffffff81119043>] ? __page_cache_release+0x23/0x110 [57600.313779] [<ffffffff8114eb53>] kmem_cache_free+0x63/0xc0 [57600.319344] [<ffffffff81579942>] drop_one_stripe+0x62/0x90 [57600.324915] [<ffffffff81579b5b>] raid5_cache_scan+0x8b/0xb0 [57600.330563] [<ffffffff8111b98a>] shrink_slab.part.36+0x19a/0x250 [57600.336650] [<ffffffff8111e38c>] shrink_zone+0x23c/0x250 [57600.342039] [<ffffffff8111e4f3>] do_try_to_free_pages+0x153/0x420 [57600.348210] [<ffffffff8111e851>] try_to_free_pages+0x91/0xa0 [57600.353959] [<ffffffff811145b1>] __alloc_pages_nodemask+0x4d1/0x8b0 [57600.360303] [<ffffffff8157a30b>] check_reshape+0x62b/0x770 [57600.365866] [<ffffffff8157a4a5>] raid5_check_reshape+0x55/0xa0 [57600.371778] [<ffffffff81583df7>] update_raid_disks+0xc7/0x110 [57600.377604] [<ffffffff81592b73>] md_ioctl+0xd83/0x1b10 [57600.382827] [<ffffffff81385380>] blkdev_ioctl+0x170/0x690 [57600.388307] [<ffffffff81195238>] block_ioctl+0x38/0x40 [57600.393525] [<ffffffff811731c5>] do_vfs_ioctl+0x2b5/0x480 [57600.399010] [<ffffffff8115e07b>] ? vfs_write+0x14b/0x1f0 [57600.404400] [<ffffffff811733cc>] SyS_ioctl+0x3c/0x70 [57600.409447] [<ffffffff81a6ad97>] entry_SYSCALL_64_fastpath+0x12/0x6a [57600.415875] Code: 00 00 00 00 55 48 89 e5 8b 07 85 c0 74 04 31 c0 5d c3 ba 01 00 00 00 f0 0f b1 17 85 c0 75 ef b0 01 5d c3 90 31 c0 ba 01 00 00 00 <f0> 0f b1 17 85 c0 75 01 c3 55 89 c6 48 89 e5 e8 85 d1 63 ff 5d [57600.435460] RIP [<ffffffff81a6aa87>] _raw_spin_lock+0x7/0x20 [57600.441208] RSP <ffff880043073810> [57600.444690] CR2: 0000000000000000 [57600.448000] ---[ end trace cbc6b5cc4bf9831d ]--- The problem is that resize_stripes() releases new stripe_heads before assigning new slab cache to conf->slab_cache. If the shrinker function raid5_cache_scan() gets called after resize_stripes() starting releasing new stripes but right before new slab cache being assigned, it is possible that these new stripe_heads will be freed with the old slab_cache which was already been destoryed and that triggers this bug. Signed-off-by:
Dennis Yang <dennisyang@qnap.com> Fixes: edbe83ab ("md/raid5: allow the stripe_cache to grow and shrink.") Reviewed-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Joe Thornber authored
commit 0377a07c upstream. When decrementing the reference count for a block, the free count wasn't being updated if the reference count went to zero. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 91bcdb92 upstream. These calls were the wrong way round in __write_initial_superblock. Signed-off-by:
-
Mikulas Patocka authored
commit 13840d38 upstream. Change the type of the parameter "retain_bytes" from unsigned to unsigned long, so that on 64-bit machines the user can set more than 4GiB of data to be retained. Also, change the type of the variable "count" in the function "__evict_old_buffers" to unsigned long. The assignment "count = c->n_buffers[LIST_CLEAN] + c->n_buffers[LIST_DIRTY];" could result in unsigned long to unsigned overflow and that could result in buffers not being freed when they should. While at it, avoid division in get_retain_buffers(). Division is slow, we can change it to shift because we have precalculated the log2 of block size. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Mike Snitzer authored
commit 10add84e upstream. Otherwise it is possible to trigger crashes due to the metadata being inaccessible yet these methods don't safely account for that possibility without these checks. Reported-by:
-
Mikulas Patocka authored
commit 390020ad upstream. dm-bufio checks a watermark when it allocates a new buffer in __bufio_new(). However, it doesn't check the watermark when the user changes /sys/module/dm_bufio/parameters/max_cache_size_bytes. This may result in a problem - if the watermark is high enough so that all possible buffers are allocated and if the user lowers the value of "max_cache_size_bytes", the watermark will never be checked against the new value because no new buffer would be allocated. To fix this, change __evict_old_buffers() so that it checks the watermark. __evict_old_buffers() is called every 30 seconds, so if the user reduces "max_cache_size_bytes", dm-bufio will react to this change within 30 seconds and decrease memory consumption. Depends-on: 1b0fb5a5 ("dm bufio: avoid a possible ABBA deadlock") Signed-off-by:
-
Mikulas Patocka authored
commit 1b0fb5a5 upstream. __get_memory_limit() tests if dm_bufio_cache_size changed and calls __cache_size_refresh() if it did. It takes dm_bufio_clients_lock while it already holds the client lock. However, lock ordering is violated because in cleanup_old_buffers() dm_bufio_clients_lock is taken before the client lock. This results in a possible deadlock and lockdep engine warning. Fix this deadlock by changing mutex_lock() to mutex_trylock(). If the lock can't be taken, it will be re-checked next time when a new buffer is allocated. Also add "unlikely" to the if condition, so that the optimizer assumes that the condition is false. Signed-off-by:
-
Mikulas Patocka authored
commit 7b81ef8b upstream. Since the commit 0cf45031 ("dm raid: add support for the MD RAID0 personality"), the dm-raid subsystem can activate a RAID-0 array. Therefore, add MD_RAID0 to the dependencies of DM_RAID, so that MD_RAID0 will be selected when DM_RAID is selected. Fixes: 0cf45031 ("dm raid: add support for the MD RAID0 personality") Signed-off-by:
-
Vinothkumar Raja authored
commit 7d1fedb6 upstream. dm_btree_find_lowest_key() is giving incorrect results. find_key() traverses the btree correctly for finding the highest key, but there is an error in the way it traverses the btree for retrieving the lowest key. dm_btree_find_lowest_key() fetches the first key of the rightmost block of the btree instead of fetching the first key from the leftmost block. Fix this by conditionally passing the correct parameter to value64() based on the @find_highest flag. Signed-off-by:
Erez Zadok <ezk@fsl.cs.sunysb.edu> Signed-off-by:
Vinothkumar Raja <vinraja@cs.stonybrook.edu> Signed-off-by:
Nidhi Panpalia <npanpalia@cs.stonybrook.edu> Signed-off-by:
-
Paolo Abeni authored
commit eea40b8f upstream. The infiniband address handle can be triggered to resolve an ipv6 address in response to MAD packets, regardless of the ipv6 module being disabled via the kernel command line argument. That will cause a call into the ipv6 routing code, which is not initialized, and a conseguent oops. This commit addresses the above issue replacing the direct lookup call with an indirect one via the ipv6 stub, which is properly initialized according to the ipv6 status (e.g. if ipv6 is disabled, the routing lookup fails gracefully) Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Jerry Snitselaar authored
commit 8569defd upstream. Make sure size of response buffer is at least 6 bytes, or we will underflow and pass large size_t to memcpy_fromio(). This was encountered while testing earlier version of locality patchset. Fixes: 30fc8d13 ("tpm: TPM 2.0 CRB Interface") Signed-off-by:
Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Marc Dietrich authored
commit 0c18927f upstream. Current U-Boot enables the display already. Marking the regulator as enabled on boot fixes sporadic panel initialization failures. Signed-off-by:
Marc Dietrich <marvin24@gmx.de> Tested-by:
Misha Komarovskiy <zombah@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Vamsi Krishna Samavedam authored
commit 2f964780 upstream. Format specifier %p can leak kernel addresses while not valuing the kptr_restrict system settings. When kptr_restrict is set to (1), kernel pointers printed using the %pK format specifier will be replaced with Zeros. Debugging Note : &pK prints only Zeros as address. If you need actual address information, write 0 to kptr_restrict. echo 0 > /proc/sys/kernel/kptr_restrict [Found by poking around in a random vendor kernel tree, it would be nice if someone would actually send these types of patches upstream - gkh] Signed-off-by:
Vamsi Krishna Samavedam <vskrishn@codeaurora.org> Signed-off-by:
-
Willy Tarreau authored
commit 3e21f4af upstream. The lp_setup() code doesn't apply any bounds checking when passing "lp=none", and only in this case, resulting in an overflow of the parport_nr[] array. All versions in Git history are affected. Reported-By:
Roee Hay <roee.hay@hcl.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Johan Hovold authored
commit 46c319b8 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Alan Stern authored
commit 628c2893 upstream. The ene_usb6250 sub-driver in usb-storage does USB I/O to buffers on the stack, which doesn't work with vmapped stacks. This patch fixes the problem by allocating a separate 512-byte buffer at probe time and using it for all of the offending I/O operations. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by:
-
Maksim Salau authored
commit 0bd193d6 upstream. get_version_reply is not freed if function returns with success. Fixes: 942a4873 ("usb: misc: legousbtower: Fix buffers on stack") Reported-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Maksim Salau <maksim.salau@gmail.com> Signed-off-by:
-
Maksim Salau authored
commit 942a4873 upstream. Allocate buffers on HEAP instead of STACK for local structures that are to be received using usb_control_msg(). Signed-off-by:
Alfredo Rafael Vicente Boix <alviboi@gmail.com> Signed-off-by:
-
- 20 May, 2017 18 commits
-
-
Greg Kroah-Hartman authored
-
Joeseph Chang authored
commit 6de65fcf upstream. msg_written_handler() may set ssif_info->multi_data to NULL when using ipmitool to write fru. Before setting ssif_info->multi_data to NULL, add new local pointer "data_to_send" and store correct i2c data pointer to it to fix NULL pointer kernel panic and incorrect ssif_info->multi_pos. Signed-off-by:
Joeseph Chang <joechang@codeaurora.org> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Maxim Altshul authored
commit e7ee74b5 upstream. This event is used by the Firmware to limit the RX BA win size for a specific link. The event handler updates the new size in the mac's sta->sta struct. BA sessions opened for that link will use the new restricted win_size. This limitation remains until a new update is received or until the link is closed. Signed-off-by:
Maxim Altshul <maxim.altshul@ti.com> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Maxim Altshul authored
commit 42c7372a upstream. When starting a new BA session, we must pass the win_size to the FW. To do this we take max_rx_aggregation_subframes (BA RX win size) which is stored in ieee80211_sta structure (e.g per link and not per HW) We will use the value stored per link when passing the win_size to firmware through the ACX_BA_SESSION_RX_SETUP command. Signed-off-by:
-
Maxim Altshul authored
commit 480dd46b upstream. The ability to change the max_rx_aggregation frames is useful in cases of IOP. There exist some devices (latest mobile phones and some AP's) that tend to not respect a BA sessions maximum size (in Kbps). These devices won't respect the AMPDU size that was negotiated during association (even though they do respect the maximal number of packets). This violation is characterized by a valid number of packets in a single AMPDU. Even so, the total size will exceed the size negotiated during association. Eventually, this will cause some undefined behavior, which in turn causes the hw to drop packets, causing the throughput to plummet. This patch will make the subframe limitation to be held by each station, instead of being held only by hw. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Sara Sharon authored
commit 50ea05ef upstream. Currently mac80211 does not inform the driver of the session block ack timeout when starting a rx aggregation session. Drivers that manage the reorder buffer need to know this parameter. Seeing that there are now too many arguments for the drv_ampdu_action() function, wrap them inside a structure. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
Sara Sharon authored
commit fad47186 upstream. Currently mac80211 does not inform the driver of the window size when starting an RX aggregation session. To enable managing the reorder buffer in the driver or hardware the window size is needed. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Johan Hovold authored
commit dcb9cfaa upstream. Make sure to check the tty-device pointer before looking up the sibling platform device to avoid dereferencing a NULL-pointer when the tty is one end of a Unix98 pty. Fixes: 74cdad37 ("Bluetooth: hci_intel: Add runtime PM support") Fixes: 1ab1f239 ("Bluetooth: hci_intel: Add support for platform driver") Cc: Loic Poulain <loic.poulain@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Johan Hovold authored
commit 95065a61 upstream. Make sure to check the tty-device pointer before looking up the sibling platform device to avoid dereferencing a NULL-pointer when the tty is one end of a Unix98 pty. Fixes: 0395ffc1 ("Bluetooth: hci_bcm: Add PM for BCM devices") Cc: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by:
-
Szymon Janc authored
commit ab89f0bd upstream. Running 32bit userspace on 64bit kernel results in MSG_CMSG_COMPAT being defined as 0x80000000. This results in sendmsg failure if used from 32bit userspace running on 64bit kernel. Fix this by accounting for MSG_CMSG_COMPAT in flags check in hci_sock_sendmsg. Signed-off-by:
Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by:
Marko Kiiskila <marko@runtime.io> Signed-off-by:
-
Wang YanQing authored
commit 77dae613 upstream. While using emacs, cat or others' commands in konsole with recent kernels, I have met many times that CTRL-C freeze konsole. After konsole freeze I can't type anything, then I have to open a new one, it is very annoying. See bug report: https://bugs.kde.org/show_bug.cgi?id=175283 The platform in that bug report is Solaris, but now the pty in linux has the same problem or the same behavior as Solaris :) It has high possibility to trigger the problem follow steps below: Note: In my test, BigFile is a text file whose size is bigger than 1G 1:open konsole 1:cat BigFile 2:CTRL-C After some digging, I find out the reason is that commit 1d1d14da ("pty: Fix buffer flush deadlock") changes the behavior of pty_flush_buffer. Thread A Thread B -------- -------- 1:n_tty_poll return POLLIN 2:CTRL-C trigger pty_flush_buffer tty_buffer_flush n_tty_flush_buffer 3:attempt to check count of chars: ioctl(fd, TIOCINQ, &available) available is equal to 0 4:read(fd, buffer, avaiable) return 0 5:konsole close fd Yes, I know we could use the same patch included in the BUG report as a workaround for linux platform too. But I think the data in ldisc is belong to application of another side, we shouldn't clear it when we want to flush write buffer of this side in pty_flush_buffer. So I think it is better to disable ldisc flush in pty_flush_buffer, because its new hehavior bring no benefit except that it mess up the behavior between POLLIN, and TIOCINQ or FIONREAD. Also I find no flush_buffer function in others' tty driver has the same behavior as current pty_flush_buffer. Fixes: 1d1d14da ("pty: Fix buffer flush deadlock") Signed-off-by:
Wang YanQing <udknight@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit 77e6fe7f upstream. Make sure to actually suspend the device before returning after a failed (or deferred) probe. Note that autosuspend must be disabled before runtime pm is disabled in order to balance the usage count due to a negative autosuspend delay as well as to make the final put suspend the device synchronously. Fixes: 388bc262 ("omap-serial: Fix the error handling in the omap_serial probe") Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Johan Hovold authored
commit 099bd73d upstream. An unbalanced and misplaced synchronous put was used to suspend the device on driver unbind, something which with a likewise misplaced pm_runtime_disable leads to external aborts when an open port is being removed. Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa024010 ... [<c046e760>] (serial_omap_set_mctrl) from [<c046a064>] (uart_update_mctrl+0x50/0x60) [<c046a064>] (uart_update_mctrl) from [<c046a400>] (uart_shutdown+0xbc/0x138) [<c046a400>] (uart_shutdown) from [<c046bd2c>] (uart_hangup+0x94/0x190) [<c046bd2c>] (uart_hangup) from [<c045b760>] (__tty_hangup+0x404/0x41c) [<c045b760>] (__tty_hangup) from [<c045b794>] (tty_vhangup+0x1c/0x20) [<c045b794>] (tty_vhangup) from [<c046ccc8>] (uart_remove_one_port+0xec/0x260) [<c046ccc8>] (uart_remove_one_port) from [<c046ef4c>] (serial_omap_remove+0x40/0x60) [<c046ef4c>] (serial_omap_remove) from [<c04845e8>] (platform_drv_remove+0x34/0x4c) Fix this up by resuming the device before deregistering the port and by suspending and disabling runtime pm only after the port has been removed. Also make sure to disable autosuspend before disabling runtime pm so that the usage count is balanced and device actually suspended before returning. Note that due to a negative autosuspend delay being set in probe, the unbalanced put would actually suspend the device on first driver unbind, while rebinding and again unbinding would result in a negative power.usage_count. Fixes: 7e9c8e7d ("serial: omap: make sure to suspend device before remove") Cc: Felipe Balbi <balbi@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
Marek Szyprowski authored
commit 768d64f4 upstream. Driver should provide its own struct device for all DMA-mapping calls instead of extracting device pointer from DMA engine channel. Although this is harmless from the driver operation perspective on ARM architecture, it is always good to use the DMA mapping API in a proper way. This patch fixes following DMA API debug warning: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1241 check_sync+0x520/0x9f4 samsung-uart 12c20000.serial: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000006df0f580] [size=64 bytes] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00137-g07ca963 #51 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24) [<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0) [<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180) [<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50) [<c01395a4>] (warn_slowpath_fmt) from [<c0729058>] (check_sync+0x520/0x9f4) [<c0729058>] (check_sync) from [<c072967c>] (debug_dma_sync_single_for_device+0x88/0xc8) [<c072967c>] (debug_dma_sync_single_for_device) from [<c0803c10>] (s3c24xx_serial_start_tx_dma+0x100/0x2f8) [<c0803c10>] (s3c24xx_serial_start_tx_dma) from [<c0804338>] (s3c24xx_serial_tx_chars+0x198/0x33c) Reported-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Fixes: 62c37eed ("serial: samsung: add dma reqest/release functions") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Marc Zyngier authored
commit c667186f upstream. Our 32bit CP14/15 handling inherited some of the ARMv7 code for handling the trapped system registers, completely missing the fact that the fields for Rt and Rt2 are now 5 bit wide, and not 4... Let's fix it, and provide an accessor for the most common Rt case. Reviewed-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit 07a77929 upstream. The author meant to free the variable that was just allocated, instead of the one that failed to be allocated, but made a simple typo. This patch rectifies that. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Björn Jacke authored
commit 85435d7a upstream. SFM is mapping doublequote to 0xF020 Without this patch creating files with doublequote fails to Windows/Mac Signed-off-by:
Bjoern Jacke <bjacke@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
David Disseldorp authored
commit d8a6e505 upstream. An open directory may have a NULL private_data pointer prior to readdir. Fixes: 0de1f4c6 ("Add way to query server fs info for smb3") Signed-off-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
-
