- 31 Jul, 2020 3 commits
-
-
Cezary Rojewski authored
Modify snd_soc_add_component so it calls snd_soc_component_initialize no longer and thus providing true two-step registration. Drivers may choose to change component's fields before actually adding it to ASoC subsystem. Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20200731144146.6678-4-cezary.rojewski@intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Cezary Rojewski authored
Move 'name' field initialization responsibility back to snd_soc_component_initialize to prepare snd_soc_add_component function for being called separatelly as a second registration step. Signed-off-by:
-
Cezary Rojewski authored
To allow for two-step component registration, expose snd_soc_component_initialize function and move it back to soc-core.c. Signed-off-by:
-
- 30 Jul, 2020 23 commits
-
-
Mark Brown authored
The various list iterators are able to handle an empty list. The only effect of avoiding the loop is not initializing some index variables. Drop list_empty tests in cases where these variables are not used. The semantic patch that makes these changes is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ expression x,e; iterator name list_for_each_entry; statement S; identifier i; @@ -if (!(list_empty(x))) { list_for_each_entry(i,x,...) S - } ... when != i ? i = e @@ expression x,e; iterator name list_for_each_entry_safe; statement S; identifier i,j; @@ -if (!(list_empty(x))) { list_for_each_entry_safe(i,j,x,...) S - } ... when != i when != j ( i = e; | ? j = e; ) @@ expression x,e; iterator name list_for_each; statement S; identifier i; @@ -if (!(list_empty(x))) { list_for_each(i,x) S - } ... when != i ? i = e @@ expression x,e; iterator name list_for_each_safe; statement S; identifier i,j; @@ -if (!(list_empty(x))) { list_for_each_safe(i,j,x) S - } ... when != i when != j ( i = e; | ? j = e; ) // ------------------- @@ expression x,e; statement S; identifier i; @@ -if (!(list_empty(x))) list_for_each_entry(i,x,...) S ... when != i ? i = e @@ expression x,e; statement S; identifier i,j; @@ -if (!(list_empty(x))) list_for_each_entry_safe(i,j,x,...) S ... when != i when != j ( i = e; | ? j = e; ) @@ expression x,e; statement S; identifier i; @@ -if (!(list_empty(x))) list_for_each(i,x) S ... when != i ? i = e @@ expression x,e; statement S; identifier i,j; @@ -if (!(list_empty(x))) list_for_each_safe(i,j,x) S ... when != i when != j ( i = e; | ? j = e; ) </smpl> --- drivers/media/pci/saa7134/saa7134-core.c | 14 ++--- drivers/media/usb/cx231xx/cx231xx-core.c | 16 ++---- drivers/media/usb/tm6000/tm6000-core.c | 24 +++------- drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c | 13 ++--- drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c | 5 -- drivers/net/ethernet/sfc/ptp.c | 20 +++----- drivers/net/wireless/ath/dfs_pattern_detector.c | 15 ++---- sound/soc/intel/atom/sst/sst_loader.c | 10 +--- sound/soc/intel/skylake/skl-pcm.c | 8 +-- sound/soc/intel/skylake/skl-topology.c | 5 -- 10 files changed, 53 insertions(+), 77 deletions(-)
-
Alper Nebi Yasak authored
PulseAudio (and perhaps other userspace utilities) can not detect any jack for rk3399_gru_sound as the driver doesn't expose related Jack kcontrols. This patch adds two DAPM pins to the headset jack, where the snd_soc_card_jack_new() call automatically creates "Headphones Jack" and "Headset Mic Jack" kcontrols from them. With an appropriate ALSA UCM config specifying JackControl fields for the "Headphones" and "Headset" (mic) devices, PulseAudio can detect plug/unplug events for both of them after this patch. Signed-off-by:
Alper Nebi Yasak <alpernebiyasak@gmail.com> Link: https://lore.kernel.org/r/20200721182709.6895-1-alpernebiyasak@gmail.comSigned-off-by:
-
Fabio Estevam authored
According to the WM8962 datasheet, there is no register at address 0x200. WM8962_GPIO_BASE is just a base address for the GPIO registers and not a real register, so remove it from wm8962_readable_register(). Also, Register 515 (WM8962_GPIO_BASE + 3) does not exist, so skip its access. This fixes the following errors: wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16 wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16 Signed-off-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200717135959.19212-1-festevam@gmail.comSigned-off-by:
-
Julia Lawall authored
Use resource_size rather than a verbose computation on the end and start fields. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ struct resource ptr; @@ - (ptr.end - ptr.start + 1) + resource_size(&ptr) </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1595751933-4952-1-git-send-email-Julia.Lawall@inria.frSigned-off-by:
-
Julia Lawall authored
list_for_each_entry_safe is able to handle an empty list. The only effect of avoiding the loop is not initializing the index variable. Drop list_empty tests in cases where these variables are not used. Note that list_for_each_entry_safe is defined in terms of list_first_entry, which indicates that it should not be used on an empty list. But in list_for_each_entry_safe, the element obtained by list_first_entry is not really accessed, only the address of its list_head field is compared to the address of the list head, so the list_first_entry is safe. The semantic patch that makes this change is as follows (with another variant for the no brace case): (http://coccinelle.lip6.fr/) <smpl> @@ expression x,e; iterator name list_for_each_entry_safe; statement S; identifier i,j; @@ -if (!(list_empty(x))) { list_for_each_entry_safe(i,j,x,...) S - } ... when != i when != j ( i = e; | ? j = e; ) </smpl> Signed-off-by:
-
Mark Brown authored
Merge series "ASoC: Intel: KMB: TDM Enablement patches" from Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>: This patch series is to enable multiple features on the Keembay Platform Michael Sit Wei Hong (4): ASoC: Intel: KMB: Add 8kHz audio support ASoC: Intel: KMB: Rework disable channel function ASoC: Intel: KMB: Enable TDM audio capture dt-bindings: sound: intel,keembay-i2s: Add channel-max property .../bindings/sound/intel,keembay-i2s.yaml | 8 + sound/soc/intel/keembay/kmb_platform.c | 137 +++++++++++++----- sound/soc/intel/keembay/kmb_platform.h | 1 + 3 files changed, 112 insertions(+), 34 deletions(-) -- 2.17.1
-
Mark Brown authored
This patcheset is collection of fixes for the TDM input and output the axg audio architecture. Its fixes: - slave mode format setting - g12 and sm1 skew offset - tdm clock inversion - standard daifmt props names which don't require a specific prefix Jerome Brunet (4): ASoC: meson: axg-tdm-interface: fix link fmt setup ASoC: meson: axg-tdmin: fix g12a skew ASoC: meson: axg-tdm-formatters: fix sclk inversion ASoC: meson: cards: remove DT_PREFIX for standard daifmt properties sound/soc/meson/axg-tdm-formatter.c | 11 ++++++----- sound/soc/meson/axg-tdm-formatter.h | 1 - sound/soc/meson/axg-tdm-interface.c | 26 +++++++++++++++++--------- sound/soc/meson/axg-tdmin.c | 16 +++++++++++++++- sound/soc/meson/axg-tdmout.c | 3 --- sound/soc/meson/meson-card-utils.c | 2 +- 6 files changed, 39 insertions(+), 20 deletions(-) -- 2.25.4
-
Kuninori Morimoto authored
This patch switches from .txt base to .yaml base Document. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/87mu4cxlo2.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87o8pf3923.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/873659bpbk.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Ravulapati Vishnu vardhan rao authored
Adding rt1015 hw_params which set Bit-clock ratio, PLL and appropriate sys clk specific with RTK1015. Signed-off-by:
Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com> Link: https://lore.kernel.org/r/20200728160255.31020-6-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by:
-
Ravulapati Vishnu vardhan rao authored
DAI link support for RTK 1015 and providing the codec details depending on the snd_soc_card selected by ACPI ID. Signed-off-by:
-
Ravulapati Vishnu vardhan rao authored
Adding support for ALC1015 RTK codec in machine driver. Passing specific card structure based on its ACPI ID. Signed-off-by:
-
Ravulapati Vishnu vardhan rao authored
Passing specific snd_soc_card structure depending on the ACPI ID. In future we can add other IDs in the ACPI table and pass the structure. Signed-off-by:
-
Ravulapati Vishnu vardhan rao authored
As in future our machine driver supports multiple codecs So changing naming convention of snd_soc_card struct and its fields. Signed-off-by:
-
Simon Shields authored
This patch adds support for voice and BT calls, along with standard audio output via the speaker, earpiece, headphone jack, HDMI, and any accessories compatible with Midas boards. This patch also supports headphone/headset detection and headsets with inline buttons. [m.szyprowski: adaptation to v5.1+ kernels (DAI links initialization)] [s.nawrocki: removal of the clk API calls for CODEC MCLK, the jack data structure moved to struct midas_priv, coding style and typo fixes, conversion to new cpu/codec/dai-node binding] Signed-off-by:
Simon Shields <simon@lineageos.org> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200728131111.14334-2-s.nawrocki@samsung.comSigned-off-by:
-
Sylwester Nawrocki authored
This patch adds documentation of DT biding for the Midas sound complex. Partially based on the *txt version by Simon Shields <simon@lineageos.org>. Signed-off-by:
-
Dan Murphy authored
Reset the device before programming the registers or all programming will be lost as the device resets registers to default settings. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200730142419.28205-2-dmurphy@ti.comSigned-off-by:
-
Dan Murphy authored
The header was updated to align with the data sheet to start the GPO_CFG at GPO_CFG0. The code was not updated to the change and therefore the GPO_CFG0 register was not written to. Fixes: 6617cff6 ("ASoC: tlv320adcx140: Add GPO configuration and drive output config") Signed-off-by:
-
Michael Sit Wei Hong authored
All channels are enabled at boot up, this patch ensures that all channels are disabled at boot and whenever the function is called. Signed-off-by:
Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Reviewed-by:
Sia Jee Heng <jee.heng.sia@intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200730055319.1522-3-michael.wei.hong.sit@intel.comSigned-off-by:
-
Michael Sit Wei Hong authored
Enable 8kHz audio support for Intel Keem Bay platform. Signed-off-by:
-
Jerome Brunet authored
Standard dai format property don't need the "amlogic," prefix. There nothing amlogic specific about them. Just remove it. Fixes: 435857e0 ("ASoC: meson: align axg card driver with DT bindings documentation") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200729154456.1983396-5-jbrunet@baylibre.comSigned-off-by:
-
Jerome Brunet authored
After carefully checking, it appears that both tdmout and tdmin require the rising edge of the sclk they get to be synchronized with the frame sync event (which should be a rising edge of lrclk). TDMIN was improperly set before this patch. Remove the sclk_invert quirk which is no longer needed and fix the sclk phase. Fixes: 1a11d88f ("ASoC: meson: add tdm formatter base driver") Signed-off-by:
-
Jerome Brunet authored
After carefully checking the result provided by the TDMIN on the g12a and sm1 SoC families, the TDMIN skew offset appears to be 3 instead of 2 on the axg. Fixes: f01bc67f ("ASoC: meson: axg-tdm-formatter: rework quirks settings") Signed-off-by:
-
Jerome Brunet authored
The .set_fmt() callback of the axg tdm interface incorrectly test the content of SND_SOC_DAIFMT_MASTER_MASK as if it was a bitfield, which it is not. Implement the test correctly. Fixes: d60e4f1e ("ASoC: meson: add tdm interface driver") Signed-off-by:
-
- 29 Jul, 2020 3 commits
-
-
Dan Murphy authored
Add General Purpose Output (GPO) configuration and driver output configuration. The GPOs can be configured as a GPO, IRQ, SDOUT or a PDMCLK output. In addition the output drive can be configured with various configurations. Signed-off-by:
-
Dan Murphy authored
Add properties for configuring the General Purpose Outputs (GPO). The GPOs. There are 2 settings for each GPO, configuration and the output drive type. Signed-off-by:
-
Dan Murphy authored
Fix white space issues and remove else case where it was not needed. Convert "static const char *" to "static const char * const" Fixes: 689c7655 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family") Signed-off-by:
-
- 28 Jul, 2020 9 commits
-
-
Mark Brown authored
Revert 5b235b55 ("ASoC: dt-bindings: ak4613: switch to yaml base Documentation") for the time being since it depends on other conversions. Reported-by:
Rob Herring <robh+dt@kernel.org> Signed-off-by:
-
Seung-Woo Kim authored
Silence clk_get() error with dev_dbg() on -EPROBE_DEFER. Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Link: https://lore.kernel.org/r/1595564371-13692-1-git-send-email-sw0312.kim@samsung.comSigned-off-by:
-
Mark Brown authored
Merge series "SOF Fixes for S0iX suspend/resume sequence" from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>: This set of patches is required for facilitating system S0ix entry when the DSP is in D0I3. This first patch adds the missing CORB/RIRB DMA stop and restart to the suspend/resume sequence along with powering up/down the links. The second patch ensures that the FW traces are disabled when the system enters S0ix with the DSP in D0I3. Marcin Rajwa (2): ASoC: SOF: Intel: fix the suspend procedure to support s0ix entry ASoC: SOF: Intel: disable traces when switching to S0Ix D0I3 sound/soc/sof/intel/hda-dsp.c | 48 ++++++++++++++++++++++++++++++++--- 1 file changed, 44 insertions(+), 4 deletions(-) -- 2.25.1
-
Dan Murphy authored
Convert the TAS2562 text file to yaml format. Signed-off-by:
-
Dan Murphy authored
Update the shutdown GPIO property to be shutdown from shut-down. Fixes: c173dba4 ("ASoC: tas2562: Introduce the TAS2562 amplifier") Signed-off-by:
-
Katsuhiro Suzuki authored
This patch converts Everest Semiconductor ES8316 low power audio CODEC binding to DT schema. Signed-off-by:
Katsuhiro Suzuki <katsuhiro@katsuster.net> Reviewed-by:
-
Charles Keepax authored
Set the channel number on each AIF widget to allow unused channels not to be powered up across AIFs. Signed-off-by:
-
Marcin Rajwa authored
We should always disable DMA trace on S0Ix. When staying at S0-D0I3, we should enable DMA trace while both DMA Trace debug is enabled and hda_enable_trace_D0I3_S0 is set. This commit corrects the existed logic errors about that. Signed-off-by:
Marcin Rajwa <marcin.rajwa@linux.intel.com> Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200727183613.1419005-3-ranjani.sridharan@linux.intel.comSigned-off-by:
-
Marcin Rajwa authored
This patch fixes the suspend & resume procedure to allow entry into the low power states with some streams being active as a wake source - wake on voice is a perfect example. The current implementation does not stop the CORB/RIRB DMA and does not power down the HDA links. With firmware's help, the platform has been able to still enter s0ix state on older platforms, but the sequence is still incorrect, and the additional driver actions are needed to ensure correct s0ix behaviour. Signed-off-by:
-
- 27 Jul, 2020 2 commits
-
-
Mark Brown authored
Merge series "ASoC: intel: use asoc_substream_to_rtd()" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark I have posted "ASoC: add asoc_substream_to_rtd() macro" patch-set to ALSA SoC ML (= see Link), and then Pierre-Louis wanted that Intel patch was separated for boards. The patches which are not for Intel were already accepted. This is for Intel, and Intel boards. Link: https://lore.kernel.org/r/87y2nf0yw2.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/877duz0ysw.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (2): ASoC: intel/boards: use asoc_substream_to_rtd() ASoC: intel: use asoc_substream_to_rtd() sound/soc/intel/atom/sst-mfld-platform-pcm.c | 6 +++--- sound/soc/intel/baytrail/sst-baytrail-pcm.c | 16 ++++++++-------- sound/soc/intel/boards/bdw-rt5650.c | 2 +- sound/soc/intel/boards/bdw-rt5677.c | 4 ++-- sound/soc/intel/boards/broadwell.c | 2 +- sound/soc/intel/boards/bxt_rt298.c | 2 +- sound/soc/intel/boards/byt-rt5640.c | 2 +- sound/soc/intel/boards/bytcht_da7213.c | 4 ++-- sound/soc/intel/boards/bytcr_rt5640.c | 2 +- sound/soc/intel/boards/bytcr_rt5651.c | 2 +- sound/soc/intel/boards/cht_bsw_max98090_ti.c | 2 +- sound/soc/intel/boards/cht_bsw_nau8824.c | 2 +- sound/soc/intel/boards/cht_bsw_rt5645.c | 2 +- sound/soc/intel/boards/cht_bsw_rt5672.c | 2 +- sound/soc/intel/boards/cml_rt1011_rt5682.c | 4 ++-- sound/soc/intel/boards/ehl_rt5660.c | 2 +- sound/soc/intel/boards/glk_rt5682_max98357a.c | 2 +- sound/soc/intel/boards/haswell.c | 2 +- sound/soc/intel/boards/kbl_da7219_max98927.c | 8 ++++---- sound/soc/intel/boards/kbl_rt5660.c | 2 +- sound/soc/intel/boards/kbl_rt5663_max98927.c | 4 ++-- .../intel/boards/kbl_rt5663_rt5514_max98927.c | 4 ++-- sound/soc/intel/boards/skl_nau88l25_max98357a.c | 2 +- sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 2 +- sound/soc/intel/boards/skl_rt286.c | 2 +- sound/soc/intel/boards/sof_da7219_max98373.c | 2 +- sound/soc/intel/boards/sof_maxim_common.c | 4 ++-- sound/soc/intel/boards/sof_pcm512x.c | 4 ++-- sound/soc/intel/boards/sof_rt5682.c | 4 ++-- sound/soc/intel/boards/sof_sdw_rt1308.c | 2 +- sound/soc/intel/boards/sof_wm8804.c | 2 +- sound/soc/intel/haswell/sst-haswell-pcm.c | 12 ++++++------ sound/soc/intel/keembay/kmb_platform.c | 2 +- sound/soc/intel/skylake/skl-pcm.c | 8 ++++---- 34 files changed, 62 insertions(+), 62 deletions(-) -- 2.25.1
-
Stephan Gerhold authored
Right now the direction of a DAI has to be specified as a literal number in the device tree, e.g.: dai@0 { reg = <0>; direction = <2>; }; but this does not make it immediately clear that this is a playback/RX-only DAI. Actually, q6asm-dai.c has useful defines for this. Move them to the dt-bindings header to allow using them in the dts(i) files. The example above then becomes: dai@0 { reg = <0>; direction = <Q6ASM_DAI_RX>; }; which is immediately recognizable as playback/RX-only DAI. Signed-off-by:Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200727082502.2341-1-stephan@gerhold.netSigned-off-by:
-
