- 16 Jun, 2010 12 commits
-
-
Rabin Vincent authored
Use the newly added infrastructure to configure the SSP0 and I2C[0-3] pins on the MOP500 board. The u8500_init_devices() call needed to be moved up in order to register the GPIO device first. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Linus Walleij authored
This removes the hard-coded shift values for the MTU timer, since the different platforms using this has very different running frequencies doing this dynamically is a better idea. Also take this opportunity to make a more through shutdown of the MTU clockevent when requested. Acked-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Rabin Vincent authored
arch/arm/plat-nomadik/gpio.c: In function 'nmk_gpio_remove': arch/arm/plat-nomadik/gpio.c:630: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result Because this function is marked __exit and this code can't be built as a module, this function is never used. So just remove it, fixing the warning in the process. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Rabin Vincent authored
So that gpio_to_irq() works. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Rabin Vincent authored
So that set_irq_wake() works. Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Rabin Vincent authored
Move the platform driver registration to a core_initcall, instead of an arch_initcall. This will allow us to use gpio related calls in init_machine() (which is an arch_initcall) after adding the gpio platform devices. Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Rabin Vincent authored
Add a pin configuration API to all pin-related configuration to be specified with a single macro and groups of pins to be configured at one go. Based on the PXA MFP implementation. Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Rabin Vincent authored
Extract out a portion of nmk_gpio_set_mode() that can be called with the lock already held. This will be used from the pincfg API. Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Rabin Vincent authored
Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Rabin Vincent authored
Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Rabin Vincent authored
The ->direction_output() callback needs to set the value it was passed, in addition to setting the direction as output. On this peripheral, we can't set the value before setting the direction, so set it after. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Rabin Vincent authored
Implement set_type() to allow configuration of the trigger type. Cc: Abhijeet Dharmapurikar <adharmap@quicinc.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 12 Jun, 2010 1 commit
-
-
Linus Torvalds authored
-
- 11 Jun, 2010 27 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: wimax/i2400m: fix missing endian correction read in fw loader net8139: fix a race at the end of NAPI pktgen: Fix accuracy of inter-packet delay. pkt_sched: gen_estimator: add a new lock net: deliver skbs on inactive slaves to exact matches ipv6: fix ICMP6_MIB_OUTERRORS r8169: fix mdio_read and update mdio_write according to hw specs gianfar: Revive the driver for eTSEC devices (disable timestamping) caif: fix a couple range checks phylib: Add support for the LXT973 phy. net: Print num_rx_queues imbalance warning only when there are allocated queues
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6Linus Torvalds authored
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / x86: Save/restore MISC_ENABLE register
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: The file argument for fsync() is never null Btrfs: handle ERR_PTR from posix_acl_from_xattr() Btrfs: avoid BUG when dropping root and reference in same transaction Btrfs: prohibit a operation of changing acl's mask when noacl mount option used Btrfs: should add a permission check for setfacl Btrfs: btrfs_lookup_dir_item() can return ERR_PTR Btrfs: btrfs_read_fs_root_no_name() returns ERR_PTRs Btrfs: unwind after btrfs_start_transaction() errors Btrfs: btrfs_iget() returns ERR_PTR Btrfs: handle kzalloc() failure in open_ctree() Btrfs: handle error returns from btrfs_lookup_dir_item() Btrfs: Fix BUG_ON for fs converted from extN Btrfs: Fix null dereference in relocation.c Btrfs: fix remap_file_pages error Btrfs: uninitialized data is check_path_shared() Btrfs: fix fallocate regression Btrfs: fix loop device on top of btrfs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: clear bridge resource range if BIOS assigned bad one PCI: hotplug/cpqphp, fix NULL dereference Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/" PCI: change resource collision messages from KERN_ERR to KERN_INFO
-
Yinghai Lu authored
Yannick found that video does not work with 2.6.34. The cause of this bug was that the BIOS had assigned the wrong range to the PCI bridge above the video device. Before 2.6.34 the kernel would have shrunk the size of the bridge window, but since d65245c3 PCI: don't shrink bridge resources the kernel will avoid shrinking BIOS ranges. So zero out the old range if we fail to claim it at boot time; this will cause us to allocate a new range at startup, restoring the 2.6.34 behavior. Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009. Reported-by: Yannick <yannick.roehlly@free.fr> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Jiri Slaby authored
There are devices out there which are PCI Hot-plug controllers with compaq PCI IDs, but are not bridges, hence have pdev->subordinate NULL. But cpqphp expects the pointer to be non-NULL. Add a check to the probe function to avoid oopses like: BUG: unable to handle kernel NULL pointer dereference at 00000050 IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp] *pdpt = 0000000033779001 *pde = 0000000000000000 ... The device here was: 00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11) Subsystem: Compaq Computer Corporation Device [0e11:a2f8] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Greg KH <greg@kroah.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Jesse Barnes authored
This reverts commit 75568f80. Since they're just a convenience anyway, remove these symlinks since they're causing duplicate filename errors in the wild. Acked-by: Alex Chiang <achiang@canonical.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
We can often deal with PCI resource issues by moving devices around. In that case, there's no point in alarming the user with messages like these. There are many bug reports where the message itself is the only problem, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 . Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Dan Carpenter authored
The "file" argument for fsync is never null so we can remove this check. What drew my attention here is that 7ea80859: "drop unused dentry argument to ->fsync" introduced an unconditional dereference at the start of the function and that generated a smatch warning. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
posix_acl_from_xattr() returns both ERR_PTRs and null, but it's OK to pass null values to set_cached_acl() Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Sage Weil authored
If btrfs_ioctl_snap_destroy() deletes a snapshot but finishes with end_transaction(), the cleaner kthread may come in and drop the root in the same transaction. If that's the case, the root's refs still == 1 in the tree when btrfs_del_root() deletes the item, because commit_fs_roots() hasn't updated it yet (that happens during the commit). This wasn't a problem before only because btrfs_ioctl_snap_destroy() would commit the transaction before dropping the dentry reference, so the dead root wouldn't get queued up until after the fs root item was updated in the btree. Since it is not an error to drop the root reference and the root in the same transaction, just drop the BUG_ON() in btrfs_del_root(). Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Shi Weihua authored
when used Posix File System Test Suite(pjd-fstest) to test btrfs, some cases about setfacl failed when noacl mount option used. I simplified used commands in pjd-fstest, and the following steps can reproduce it. ------------------------ # cd btrfs-part/ # mkdir aaa # setfacl -m m::rw aaa <- successed, but not expected by pjd-fstest. ------------------------ I checked ext3, a warning message occured, like as: setfacl: aaa/: Operation not supported Certainly, it's expected by pjd-fstest. So, i compared acl.c of btrfs and ext3. Based on that, a patch created. Fortunately, it works. Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Shi Weihua authored
On btrfs, do the following ------------------ # su user1 # cd btrfs-part/ # touch aaa # getfacl aaa # file: aaa # owner: user1 # group: user1 user::rw- group::rw- other::r-- # su user2 # cd btrfs-part/ # setfacl -m u::rwx aaa # getfacl aaa # file: aaa # owner: user1 # group: user1 user::rwx <- successed to setfacl group::rw- other::r-- ------------------ but we should prohibit it that user2 changing user1's acl. In fact, on ext3 and other fs, a message occurs: setfacl: aaa: Operation not permitted This patch fixed it. Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
btrfs_lookup_dir_item() can return either ERR_PTRs or null. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
btrfs_read_fs_root_no_name() returns ERR_PTRs on error so I added a check for that. It's not clear to me if it can also return NULL pointers or not so I left the original NULL pointer check as is. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
This was added by a22285a6: "Btrfs: Integrate metadata reservation with start_transaction". If we goto out here then we skip all the unwinding and there are locks still held etc. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
btrfs_iget() returns an ERR_PTR() on failure and not null. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
Unwind and return -ENOMEM if the allocation fails here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Dan Carpenter authored
If btrfs_lookup_dir_item() fails, we should can just let the mount fail with an error. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Yan, Zheng authored
Tree blocks can live in data block groups in FS converted from extN. So it's easy to trigger the BUG_ON. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Yan, Zheng authored
Fix a potential null dereference in relocation.c Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Acked-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
-
Inaky Perez-Gonzalez authored
i2400m_fw_hdr_check() was accessing hardware field bcf_hdr->module_type (little endian 32) without converting to host byte sex. Reported-by: Данилин Михаил <mdanilin@nsg.net.ru> Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6Linus Torvalds authored
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: kbuild: Create output directory in Makefile.modbuiltin kbuild: Generate modules.builtin in make modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds authored
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: avoid validate_cis failure on CIS override pcmcia: dev_node removal bugfix pcmcia: yenta_socket.c Remove extra #ifdef CONFIG_YENTA_TI pcmcia: only keep saved I365_CSCINT flag if there is no PCI irq
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: try to send partial cap release on cap message on missing inode ceph: release cap on import if we don't have the inode ceph: fix misleading/incorrect debug message ceph: fix atomic64_t initialization on ia64 ceph: fix lease revocation when seq doesn't match ceph: fix f_namelen reported by statfs ceph: fix memory leak in statfs ceph: fix d_subdirs ordering problem
-
Miao Xie authored
when we use remap_file_pages() to remap a file, remap_file_pages always return error. It is because btrfs didn't set VM_CAN_NONLINEAR for vma. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-