- 29 Jan, 2024 14 commits
-
-
Min Li authored
This change is for the PHC devices that can measure the phase offset between PHC signal and the external signal, such as the 1PPS signal of GNSS. Reporting PTP_CLOCK_EXTOFF to user space will be piggy-backed to the existing ptp_extts_event so that application such as ts2phc can poll the external offset the same way as extts. Hence, ts2phc can use the offset to achieve the alignment between PHC and the external signal by the help of either SW or HW filters. Signed-off-by:
Min Li <min.li.xe@renesas.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Breno Leitao says: ==================== Fix MODULE_DESCRIPTION() for net (p3) There are hundreds of network modules that misses MODULE_DESCRIPTION(), causing a warning when compiling with W=1. Example: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com90io.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/arc-rimi.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com20020.o This part3 of the patchset focus on the missing ethernet drivers, which is now warning free. This also fixes net/pcs and ieee802154. ==================== Signed-off-by: -
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to arcnet module. Signed-off-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to ieee802154 modules. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Acked-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Lynx, XPCS and LynxI PCS drivers. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Beckhoff CX5020 EtherCAT Ethernet driver. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI CPSW switch module. Signed-off-by:
Roger Quadros <rogerq@kernel.org> Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the STMicro DWMAC for Altera SOCs. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Qualcom rmnet and emac drivers. Signed-off-by:
Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the SMSC 91x/911x/9420 Ethernet drivers. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Ocelot SoCs (VSC7514) helpers driver. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Microchip ENCX24J600 helpers driver. Signed-off-by:
-
Alessandro Marcolini authored
As of now, the field TCA_TAPRIO_ATTR_FLAGS is being validated by manually checking its value, using the function taprio_flags_valid(). With this patch, the field will be validated through the netlink policy NLA_POLICY_MASK, where the mask is defined by TAPRIO_SUPPORTED_FLAGS. The mutual exclusivity of the two flags TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD and TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST is still checked manually. Changes since RFC: - fixed reversed xmas tree - use NL_SET_ERR_MSG_MOD() for both invalid configuration Changes since v1: - Changed NL_SET_ERR_MSG_MOD to NL_SET_ERR_MSG_ATTR when wrong flags issued - Changed __u32 to u32 Changes since v2: - Added the missing parameter for NL_SET_ERR_MSG_ATTR (sorry again for the noise) Signed-off-by:
Alessandro Marcolini <alessandromarcolini99@gmail.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Suman Ghosh authored
This patch adds hardware profile supports for extracting packet headers. It makes sure that hardware is capabale of extracting ICMP, CPT, ERSPAN headers. Signed-off-by:
Suman Ghosh <sumang@marvell.com> Signed-off-by:
-
- 27 Jan, 2024 26 commits
-
-
David S. Miller authored
Jiawen Wu says: ==================== Implement irq_domain for TXGBE Implement irq_domain for the MAC interrupt and handle the sub-irqs. v3 -> v4: - fix build error v2 -> v3: - use macro defines instead of magic number v1 -> v2: - move interrupt codes to txgbe_irq.c - add txgbe-link-irq to msic irq domain - remove functions that are not needed ==================== Signed-off-by: -
Jiawen Wu authored
In the current interrupt controller, the MAC interrupt acts as the parent interrupt in the GPIO IRQ chip. But when the number of Rx/Tx ring changes, the PCI IRQ vector needs to be reallocated. Then this interrupt controller would be corrupted. So use irq_domain structure to avoid the above problem. Signed-off-by:
Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by:
-
Jiawen Wu authored
In order to change the interrupt response structure, there will be a lot of code added next. Move these interrupt codes to a new file, to make the codes cleaner. Signed-off-by:
-
William Tu authored
Add a note when using esw_port_metadata. The parameter has runtime mode but setting it does not take effect immediately. Setting it must happen in legacy mode, and the port metadata takes effects when the switchdev mode is enabled. Disable eswitch port metadata:: $ devlink dev param set pci/0000:06:00.0 name esw_port_metadata value \ false cmode runtime Change eswitch mode to switchdev mode where after choosing the metadata value:: $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev Note that other mlx5 devlink runtime parameters, esw_multiport and flow_steering_mode, do not have this limitation. Signed-off-by:William Tu <witu@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
FUJITA Tomonori authored
Since 6.8-rc1, using VTABLE_DEFAULT_ERROR for optional functions (never called) in #[vtable] is the recommended way. Note that no functional changes in this patch. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by:
Trevor Gross <tmgross@umich.edu> Signed-off-by:
-
FUJITA Tomonori authored
The relative paths like the following are bothersome and don't work with `O=` builds: //! C headers: [`include/linux/phy.h`](../../../../../../../include/linux/phy.h). This updates such links by using the `srctree`-relative link feature introduced in 6.8-rc1 like: //! C headers: [`include/linux/phy.h`](srctree/include/linux/phy.h). Signed-off-by:
-
Jakub Kicinski authored
Oleksij Rempel says: ==================== net: dsa: microchip: implement PHY loopback ==================== Link: https://lore.kernel.org/r/20240124123314.734815-1-o.rempel@pengutronix.deSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Oleksij Rempel authored
Correct the PHY loopback bit handling in the ksz8_w_phy_bmcr and ksz8_r_phy_bmcr functions for KSZ8794 and KSZ8873 variants in the ksz8795 driver. Previously, the code erroneously used Bit 7 of port register 0xD for both chip variants, which is actually for LED configuration. This update ensures the correct registers and bits are used for the PHY loopback feature: - For KSZ8794: Use 0xF / Bit 7. - For KSZ8873: Use 0xD / Bit 0. The lack of loopback support was seen on KSZ8873 system by using "ethtool -t lanX". After this patch, the ethtool selftest will work, but only if port is not part of a bridge. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://lore.kernel.org/r/20240124123314.734815-4-o.rempel@pengutronix.deSigned-off-by:
-
Oleksij Rempel authored
Remove the manual checks for register value changes in the ksz8_w_phy_bmcr function. Instead, rely on regmap_update_bits() for optimizing register updates. Signed-off-by:
-
Oleksij Rempel authored
Isolate the Basic Mode Control Register (BMCR) operations in the ksz8795 driver by moving the BMCR-related code segments from the ksz8_r_phy() and ksz8_w_phy() functions to newly created ksz8_r_phy_bmcr() and ksz8_w_phy_bmcr() functions. Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2024-01-26 We've added 107 non-merge commits during the last 4 day(s) which contain a total of 101 files changed, 6009 insertions(+), 1260 deletions(-). The main changes are: 1) Add BPF token support to delegate a subset of BPF subsystem functionality from privileged system-wide daemons such as systemd through special mount options for userns-bound BPF fs to a trusted & unprivileged application. With addressed changes from Christian and Linus' reviews, from Andrii Nakryiko. 2) Support registration of struct_ops types from modules which helps projects like fuse-bpf that seeks to implement a new struct_ops type, from Kui-Feng Lee. 3) Add support for retrieval of cookies for perf/kprobe multi links, from Jiri Olsa. 4) Bigger batch of prep-work for the BPF verifier to eventually support preserving boundaries and tracking scalars on narrowing fills, from Maxim Mikityanskiy. 5) Extend the tc BPF flavor to support arbitrary TCP SYN cookies to help with the scenario of SYN floods, from Kuniyuki Iwashima. 6) Add code generation to inline the bpf_kptr_xchg() helper which improves performance when stashing/popping the allocated BPF objects, from Hou Tao. 7) Extend BPF verifier to track aligned ST stores as imprecise spilled registers, from Yonghong Song. 8) Several fixes to BPF selftests around inline asm constraints and unsupported VLA code generation, from Jose E. Marchesi. 9) Various updates to the BPF IETF instruction set draft document such as the introduction of conformance groups for instructions, from Dave Thaler. 10) Fix BPF verifier to make infinite loop detection in is_state_visited() exact to catch some too lax spill/fill corner cases, from Eduard Zingerman. 11) Refactor the BPF verifier pointer ALU check to allow ALU explicitly instead of implicitly for various register types, from Hao Sun. 12) Fix the flaky tc_redirect_dtime BPF selftest due to slowness in neighbor advertisement at setup time, from Martin KaFai Lau. 13) Change BPF selftests to skip callback tests for the case when the JIT is disabled, from Tiezhu Yang. 14) Add a small extension to libbpf which allows to auto create a map-in-map's inner map, from Andrey Grafin. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (107 commits) selftests/bpf: Add missing line break in test_verifier bpf, docs: Clarify definitions of various instructions bpf: Fix error checks against bpf_get_btf_vmlinux(). bpf: One more maintainer for libbpf and BPF selftests selftests/bpf: Incorporate LSM policy to token-based tests selftests/bpf: Add tests for LIBBPF_BPF_TOKEN_PATH envvar libbpf: Support BPF token path setting through LIBBPF_BPF_TOKEN_PATH envvar selftests/bpf: Add tests for BPF object load with implicit token selftests/bpf: Add BPF object loading tests with explicit token passing libbpf: Wire up BPF token support at BPF object level libbpf: Wire up token_fd into feature probing logic libbpf: Move feature detection code into its own file libbpf: Further decouple feature checking logic from bpf_object libbpf: Split feature detectors definitions from cached results selftests/bpf: Utilize string values for delegate_xxx mount options bpf: Support symbolic BPF FS delegation mount options bpf: Fail BPF_TOKEN_CREATE if no delegation option was set on BPF FS bpf,selinux: Allocate bpf_security_struct per BPF token selftests/bpf: Add BPF token-enabled tests libbpf: Add BPF token support to bpf_prog_load() API ... ==================== Link: https://lore.kernel.org/r/20240126215710.19855-1-daniel@iogearbox.netSigned-off-by: -
Jakub Kicinski authored
Christian Marangi says: ==================== net: phy: generic polarity + LED support for qca808x This small series add LEDs support for qca808x. QCA808x apply on PHY reset a strange polarity settings and require some tweak to apply a more common configuration found on devices. On adding support for it, it was pointed out that a similar feature is also being implemented for a marvell PHY where LED polarity is set per LED (and not global) and also have a special mode where the LED is tristated. The first 3 patch are to generalize this as we expect more PHY in the future to have a similar configuration. The implementation is extensible to support additional special mode in the future with minimal changes and don't create regression on already implemented PHY drivers. ==================== Link: https://lore.kernel.org/r/20240125203702.4552-1-ansuelsmth@gmail.comSigned-off-by:
-
Christian Marangi authored
Add LED support for QCA8081 PHY. Documentation for this LEDs PHY is very scarce even with NDA access to Documentation for OEMs. Only the blink pattern are documented and are very confusing most of the time. No documentation is present about forcing the LED on/off or to always blink. Those settings were reversed by poking the regs and trying to find the correct bits to trigger these modes. Some bits mode are not clear and maybe the documentation option are not 100% correct. For the sake of LED support the reversed option are enough to add support for current LED APIs. Supported HW control modes are: - tx - rx - link_10 - link_100 - link_1000 - link_2500 - half_duplex - full_duplex Also add support for LED polarity set to set LED polarity to active high or low. QSDK sets this value to high by default but PHY reset value doesn't have this enabled by default. QSDK also sets 2 additional bits but their usage is not clear, info about this is added in the header. It was verified that for correct function of the LED if active high is needed, only BIT 6 is needed. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Reviewed-by:
-
Christian Marangi authored
Add Documentation for QCA808x PHYs for the additional LED configuration for this PHY. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240125203702.4552-5-ansuelsmth@gmail.comSigned-off-by:
-
Christian Marangi authored
Add support for PHY LEDs polarity modes. Some PHY require LED to be set to active low to be turned ON. Adds support for this by declaring active-low property in DT. PHY driver needs to declare .led_polarity_set() to configure LED polarity modes. Function will pass the index with the LED index and a bitmap with all the required modes to set. Current supported modes are: - active-low with the flag PHY_LED_ACTIVE_LOW. LED is set to active-low to turn it ON. - inactive-high-impedance with the flag PHY_LED_INACTIVE_HIGH_IMPEDANCE. LED is set to high impedance to turn it OFF. Signed-off-by:
-
Christian Marangi authored
Document LED inactive high impedance mode to set the LED to require high impedance configuration to be turned OFF. Signed-off-by:
Lee Jones <lee@kernel.org> Reviewed-by:
-
Christian Marangi authored
Move LED active-low property to common.yaml. This property is currently defined multiple times by bcm LEDs. This property will now be supported in a generic way for PHY LEDs with the use of a generic function. With active-low bool property not defined, active-high is always assumed. Signed-off-by:
-
Kees Cook authored
A potential string truncation was reported in bnx2x_fill_fw_str(), when a long bp->fw_ver and a long phy_fw_ver might coexist, but seems unlikely with real-world hardware. Use scnprintf() to indicate the intent that truncations are tolerated. While reading this code, I found a collection of various buffer size counting issues. None looked like they might lead to a buffer overflow with current code (the small buffers are 20 bytes and might only ever consume 10 bytes twice with a trailing %NUL). However, early truncation (due to a %NUL in the middle of the string) might be happening under likely rare conditions. Regardless fix the formatters and related functions: - Switch from a separate strscpy() to just adding an additional "%s" to the format string that immediately follows it in bnx2x_fill_fw_str(). - Use sizeof() universally instead of using unbound defines. - Fix bnx2x_7101_format_ver() and bnx2x_null_format_ver() to report the number of characters written, not including the trailing %NUL (as already done with the other firmware formatting functions). - Require space for at least 1 byte in bnx2x_get_ext_phy_fw_version() for the trailing %NUL. - Correct the needed buffer size in bnx2x_3_seq_format_ver(). Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401260858.jZN6vD1k-lkp@intel.com/ Cc: Ariel Elior <aelior@marvell.com> Cc: Sudarsana Kalluru <skalluru@marvell.com> Cc: Manish Chopra <manishc@marvell.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20240126041044.work.220-kees@kernel.orgSigned-off-by:
-
Li Zhijian authored
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. coccinelle complains that there are still a couple of functions that use snprintf(). Convert them to sysfs_emit(). > ./drivers/ptp/ptp_sysfs.c:27:8-16: WARNING: please use sysfs_emit No functional change intended Signed-off-by:
Li Zhijian <lizhijian@fujitsu.com> Acked-by:
-
Jakub Kicinski authored
Kuniyuki Iwashima says: ==================== af_unix: Random improvements for GC. If more than 16000 inflight AF_UNIX sockets exist on a host, each sendmsg() will be forced to wait for unix_gc() even if a process is not sending any FD. This series tries not to impose such a penalty on sane users who do not send AF_UNIX FDs or do not have inflight sockets more than SCM_MAX_FD * 8. The first patch can be backported to -stable. Cleanup patches for commit 69db702c ("io_uring/af_unix: disable sending io_uring over sockets") and large refactoring of GC will be followed later. v4: https://lore.kernel.org/netdev/20231219030102.27509-1-kuniyu@amazon.com/ v3: https://lore.kernel.org/netdev/20231218075020.60826-1-kuniyu@amazon.com/ v2: https://lore.kernel.org/netdev/20231123014747.66063-1-kuniyu@amazon.com/ v1: https://lore.kernel.org/netdev/20231122013629.28554-1-kuniyu@amazon.com/ ==================== Link: https://lore.kernel.org/r/20240123170856.41348-1-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
If more than 16000 inflight AF_UNIX sockets exist and the garbage collector is not running, unix_(dgram|stream)_sendmsg() call unix_gc(). Also, they wait for unix_gc() to complete. In unix_gc(), all inflight AF_UNIX sockets are traversed at least once, and more if they are the GC candidate. Thus, sendmsg() significantly slows down with too many inflight AF_UNIX sockets. However, if a process sends data with no AF_UNIX FD, the sendmsg() call does not need to wait for GC. After this change, only the process that meets the condition below will be blocked under such a situation. 1) cmsg contains AF_UNIX socket 2) more than 32 AF_UNIX sent by the same user are still inflight Note that even a sendmsg() call that does not meet the condition but has AF_UNIX FD will be blocked later in unix_scm_to_skb() by the spinlock, but we allow that as a bonus for sane users. The results below are the time spent in unix_dgram_sendmsg() sending 1 byte of data with no FD 4096 times on a host where 32K inflight AF_UNIX sockets exist. Without series: the sane sendmsg() needs to wait gc unreasonably. $ sudo /usr/share/bcc/tools/funclatency -p 11165 unix_dgram_sendmsg Tracing 1 functions for "unix_dgram_sendmsg"... Hit Ctrl-C to end. ^C nsecs : count distribution [...] 524288 -> 1048575 : 0 | | 1048576 -> 2097151 : 3881 |****************************************| 2097152 -> 4194303 : 214 |** | 4194304 -> 8388607 : 1 | | avg = 1825567 nsecs, total: 7477526027 nsecs, count: 4096 With series: the sane sendmsg() can finish much faster. $ sudo /usr/share/bcc/tools/funclatency -p 8702 unix_dgram_sendmsg Tracing 1 functions for "unix_dgram_sendmsg"... Hit Ctrl-C to end. ^C nsecs : count distribution [...] 128 -> 255 : 0 | | 256 -> 511 : 4092 |****************************************| 512 -> 1023 : 2 | | 1024 -> 2047 : 0 | | 2048 -> 4095 : 0 | | 4096 -> 8191 : 1 | | 8192 -> 16383 : 1 | | avg = 410 nsecs, total: 1680510 nsecs, count: 4096 Signed-off-by:Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240123170856.41348-6-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
If more than 16000 inflight AF_UNIX sockets exist and the garbage collector is not running, unix_(dgram|stream)_sendmsg() call unix_gc(). Also, they wait for unix_gc() to complete. In unix_gc(), all inflight AF_UNIX sockets are traversed at least once, and more if they are the GC candidate. Thus, sendmsg() significantly slows down with too many inflight AF_UNIX sockets. There is a small window to invoke multiple unix_gc() instances, which will then be blocked by the same spinlock except for one. Let's convert unix_gc() to use struct work so that it will not consume CPUs unnecessarily. Note WRITE_ONCE(gc_in_progress, true) is moved before running GC. If we leave the WRITE_ONCE() as is and use the following test to call flush_work(), a process might not call it. CPU 0 CPU 1 --- --- start work and call __unix_gc() if (work_pending(&unix_gc_work) || <-- false READ_ONCE(gc_in_progress)) <-- false flush_work(); <-- missed! WRITE_ONCE(gc_in_progress, true) Signed-off-by: -
Kuniyuki Iwashima authored
Currently, unix_get_socket() returns struct sock, but after calling it, we always cast it to unix_sk(). Let's return struct unix_sock from unix_get_socket(). Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Reviewed-by:
-
Kuniyuki Iwashima authored
When touching unix_sk(sk)->inflight, we are always under spin_lock(&unix_gc_lock). Let's convert unix_sk(sk)->inflight to the normal unsigned long. Signed-off-by:
-
Kuniyuki Iwashima authored
gc_in_progress is changed under spin_lock(&unix_gc_lock), but wait_for_unix_gc() reads it locklessly. Let's use READ_ONCE(). Fixes: 5f23b734 ("net: Fix soft lockups/OOM issues w/ unix garbage collector") Signed-off-by:
-
Arınç ÜNAL authored
Quoting from commit 4223f865 ("net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHY"): Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to properly control MT7530 and MT7531 switch PHYs. A noticeable change is that the behaviour of switchport interfaces going up-down-up-down is no longer there. Now, the switch can be used without the PHYs but, at the moment, every hardware design out there that I have seen uses them. For that, it would make the most sense to force the selection of MEDIATEK_GE_PHY for the MDIO interface which currently controls the MT7530 and MT7531 switches. Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20240122053451.8004-1-arinc.unal@arinc9.comSigned-off-by:
-
