- 04 Feb, 2022 14 commits
-
-
Avraham Stern authored
The size of the status_driver_data field was not adjusted when the is_valid_ack_signal field was added. Since the size of struct ieee80211_tx_info is limited, replace the is_valid_ack_signal field with a flags field, and adjust the struct size accordingly. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.0ff363d4fa56.I45792c0187034a6d0e1c99a7db741996ef7caba3@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Mordechay Goodstein authored
We validate that AP has mandatory rates set in HE capabilities. Also we make sure AP is consistent with itself on rates set in HE basic rates required joining the BSS and rates set in HE capabilities. Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
-
Johannes Berg authored
Various macros in mac80211 aren't used, remove them. In one case it's used under ifdef, so ifdef it for the W=2 warning. Signed-off-by:
-
Johannes Berg authored
This isn't a header file, I guess I must've copied from the header file and forgotten to remove the guards. Signed-off-by:
-
Johannes Berg authored
This isn't very dangerous, since the outer 'rate' variable isn't even a pointer, but it's still confusing, so use a different variable inside. Signed-off-by:
-
Mordechay Goodstein authored
Reference the spec why we decline HE support in case STA don't support all HE basic rates recurred by AP. Signed-off-by:
-
Mordechay Goodstein authored
IEEE80211_VHT_MCS_NOT_SUPPORTED and IEEE80211_HE_MCS_NOT_SUPPORTED have the same value so no real bug, but for code integrity use the HE macros for parsing HE capabilities. Signed-off-by:
-
Johannes Berg authored
When enabling -Wcast-qual e.g. via W=3, we get a lot of warnings from this file, whenever it's included. Since the fixes are simple, just do that. Signed-off-by:
-
Johannes Berg authored
When enabling -Wcast-qual e.g. via W=3, we get a lot of warnings from this file, whenever it's included. Since the fixes are simple, just do that. Signed-off-by:
-
Johannes Berg authored
When enabling -Wcast-qual e.g. via W=3, we get a lot of warnings from this file, whenever it's included. Since the fixes are simple, just do that. Signed-off-by:
-
Avraham Stern authored
When adding 6GHz channels to scan request based on reported co-located APs, don't add channels that have only APs with "non-transmitted" BSSes if they only match the wildcard SSID since they will be found by probing the "transmitted" BSS. Signed-off-by:
-
Johannes Berg authored
There's currently only one driver that reports CHECKSUM_COMPLETE, that is iwlwifi. The current hardware there calculates checksum after the SNAP header, but only RFC 1042 (and some other cases, but replicating the exact hardware logic for corner cases in the driver seemed awkward.) Newer generations of hardware will checksum _including_ the SNAP, which makes things easier. To handle that, simply always assume the checksum _includes_ the SNAP header, which this patch does, requiring to first add it for older iwlwifi hardware, and then remove it again later on conversion. Alternatively, we could have: 1) Always assumed the checksum starts _after_ the SNAP header; the problem with this is that we'd have to replace the exact "what is the SNAP" check in iwlwifi that cfg80211 has. 2) Made it configurable with some flag, but that seemed like too much complexity. Signed-off-by: -
Mordechay Goodstein authored
In UHB connection we don't have any HT/VHT elemens so in order to calculate the max RX-NSS we need also to look at HE capa element, this causes to limit us to max rx nss in UHB to 1. Also anyway we need to look at HE max rx NSS and not only at HT/VHT capa to determine the max rx nss over the connection. Signed-off-by:
-
Johannes Berg authored
If we're limiting bandwidth for some reason such as regulatory restrictions, then advertise that limitation just like we do for VHT today, so the AP is aware we cannot use the higher BW it might be using. Fixes: 41cbb0f5 ("mac80211: add support for HE") Signed-off-by:
-
- 01 Feb, 2022 11 commits
-
-
Hector Martin authored
This allows us to get console messages if the firmware crashed during early init, or if an operation failed and we're about to shut down. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Hector Martin <marcan@marcan.st> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-10-marcan@marcan.st
-
Hector Martin authored
Make all the iovar name arguments const char * instead of just char *. Reviewed-by:
-
Hector Martin authored
This was missing a NULL check, and we can collapse the strlen/alloc/copy into a devm_kstrdup(). Reviewed-by:
-
Hector Martin authored
The driver was enabling IRQs before the message processing was initialized. This could cause IRQs to come in too early and crash the driver. Instead, move the IRQ enable and hostready to a bus preinit function, at which point everything is properly initialized. Fixes: 9e37f045 ("brcmfmac: Adding PCIe bus layer support.") Reviewed-by:
-
Hector Martin authored
The alignment check was wrong (e.g. & 4 instead of & 3), and the logic was also inefficient if the length was not a multiple of 4, since it would needlessly fall back to copying the entire buffer bytewise. We already have a perfectly good memcpy_toio function, so just call that instead of rolling our own copy logic here. brcmf_pcie_init_ringbuffers was already using it anyway. Fixes: 9e37f045 ("brcmfmac: Adding PCIe bus layer support.") Reviewed-by:
-
Hector Martin authored
Move one of the declarations from sdio.c to pcie.c, since it makes no sense in the former (SDIO support is optional), and add missing ones. Fixes: 75729e11 ("brcmfmac: expose firmware config files through modinfo") Reviewed-by:
-
Hector Martin authored
If boardrev is missing from the NVRAM we add a default one, but this might need more space in the output buffer than was allocated. Ensure we have enough padding for this in the buffer. Fixes: 46f2b38a ("brcmfmac: insert default boardrev in nvram data if missing") Reviewed-by:
-
Hector Martin authored
This avoids leaking memory if brcmf_chip_get_raminfo fails. Note that the CLM blob is released in the device remove path. Fixes: 82f93cf4 ("brcmfmac: get chip's default RAM info during PCIe setup") Reviewed-by:
-
Colin Ian King authored
Variable ul_encalgo is initialized with a value that is never read, it is being re-assigned a new value in every case in the following switch statement. The initialization is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Yang Guang authored
The coccinelle report ./include/linux/ssb/ssb_driver_gige.h:98:8-9: WARNING: return of 0/1 in function 'ssb_gige_must_flush_posted_writes' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Yang Guang <yang.guang5@zte.com.cn> Signed-off-by:
David Yang <davidcomponentone@gmail.com> Signed-off-by:
-
Jiasheng Jiang authored
As the possible failure of the ioremap(), the 'local->sram' and other two could be NULL. Therefore it should be better to check it in order to avoid the later dev_dbg. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by:
-
- 31 Jan, 2022 6 commits
-
-
Colin Ian King authored
Don't populate the read-only array queue_id_to_wmm_aci on the stack but instead make it static. Also makes the object code a little smaller. Signed-off-by:
-
Changcheng Deng authored
Use min_t() in order to make code cleaner. Reported-by:
Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by:
-
Ping-Ke Shih authored
Ping-Ke Shih answered[1] a question for a user about an rtl8821ce device that reported RFE 6, which the driver did not support. Ping-Ke suggested a possible fix, but the user never reported back. A second user discovered the above thread and tested the proposed fix. Accordingly, I am pushing this change, even though I am not the author. [1] https://lore.kernel.org/linux-wireless/3f5e2f6eac344316b5dd518ebfea2f95@realtek.com/Signed-off-by:
masterzorag <masterzorag@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Po-Hao Huang authored
Previously we allocated less memory than actual required, overwrite to the buffer causes the mm module to complaint and raise access violation faults. Along with potential memory leaks when returned early. Fix these by passing the correct size and proper deinit flow. Fixes: 10d162b2 ("rtw88: 8822c: add ieee80211_ops::hw_scan") Signed-off-by:
Po-Hao Huang <phhuang@realtek.com> Signed-off-by:
-
Po-Hao Huang authored
Upon hw scan completion, idle mode is not re-entered. This might increase power consumption under no link mode. Fix this by adding the re-enter flow. We need another work for this since enter_ips waits for c2h_work to finish, which might lead to deadlock if caller is in the same work. Fixes: 10d162b2 ("rtw88: 8822c: add ieee80211_ops::hw_scan") Signed-off-by:
-
Muhammad Usama Anjum authored
ieee80211_probereq_get() can return NULL. Pointer skb should be checked for validty before use. If it is not valid, list of skbs needs to be freed. Fixes: 10d162b2 ("rtw88: 8822c: add ieee80211_ops::hw_scan") Signed-off-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by:
-
- 28 Jan, 2022 9 commits
-
-
Soontak Lee authored
CYW43570 is a 3-antenna, 2x2 MIMO,802.11a/b/g/n/ac, PCIe 3.0 for WLAN. It is BT/WIFI combo. Signed-off-by:
Soontak Lee <soontak.lee@cypress.com> Signed-off-by:
Chi-Hsien Lin <chi-hsien.lin@infineon.com> Signed-off-by:
Ian Lin <ian.lin-ee@infineon.com> Signed-off-by:
-
Hans de Goede authored
This is a second attempt at honering the country code send out by access points. This was first added in commit b0b524f0 ("brcmfmac: use ISO3166 country code and 0 rev as fallback"). Subsequently this was reverted in commit 151a7c12 ("Revert "brcmfmac: use ISO3166 country code and 0 rev as fallback""), because it was causing issues with AP mode on some brcmfmac models (specifically on BCM4359/9). Many devices ship with a nvram ccode value of X2/XT/XU/XV/ALL which are all special world-wide compatibility ccode-s. Most of these world-wide ccode-s allow passive scan mode only for 2.4GHz channels 12-14, only enabling them when an AP is seen on them. But at least on brcmfmac43455 devices this is not working correctly, these do not see accesspoints on channels 12-14 unless the ccode is changes to a country where these channels are allowed. Translating received country codes to an ISO3166 country code and 0 rev ccreq fixes devices using a brcmfmac43455 with a X2/XT/XU/XV/ALL ccode not seeing accesspoints on channels 12-14. To avoid this causing issues on other brcmfmac models again, the fallback is limited to only brcmfmac4345* chips this time. Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Soeren Moch <smoch@web.de> Cc: Fabio Aiuto <fabioaiuto83@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Tested-by: Soeren Moch <smoch@web.de> # on BCM4359/9 Signed-off-by:
-
Chin-Yen Lee authored
In the past we use dbi function of wifi mac to read/write pci config space, but the function will be remove in new chip. So use kernel api pci_read/write_config_byte instead. Signed-off-by:
Chin-Yen Lee <timlee@realtek.com> Signed-off-by:
-
Johnson Lin authored
DIG, which is short for dynamic initial gain, is used to adjust gain to get good RX performance. CCK PD feature, a mechanism that adjusts 802.11b CCK packet detection(PD) power threshold based on environment noisy level in order to avoid false alarm. Also, refine related variable naming. Signed-off-by:
Johnson Lin <johnson.lin@realtek.com> Signed-off-by:
-
Íñigo Huguet authored
Call to dle_dfi_qempty might fail, leaving qempty.qempty untouched, which is latter used to control the for loop. If that happens, it's not initialized anywhere. Initialize it so the loop doesn't iterate unless it's modified by the call to dle_dfi_qempty. Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Acked-by:
-
Zong-Zhe Yang authored
Make stuffs related to channel be collected in channel_params, and encapsulate the corresponding decision in get_channel_params(). Then, functions that takes channel_params can also notice subband type. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Zong-Zhe Yang authored
For next chipset which can support 6G band, we add the handling of ieee80211_supported_band for 6G band in advance. And a bitmap, support_bands, is added to rtw89_chip_info to declare which NL80211_BAND_* are supported. With the chipset's declaration, we register the corresponding instances of ieee80211_supported_band with wiphy. Signed-off-by:
-
Ping-Ke Shih authored
Each stations connected to AP needs to set an address CAM, so don't combine address and BSSID CAM. Signed-off-by:
-
Ping-Ke Shih authored
One mac_id is corresponding to one connected station, and port ID is a ID of virtual interfaces. With proper mac_id and port ID, firmware and hardware can handle a packet with correct context. Signed-off-by:
-
