- 30 Sep, 2013 6 commits
-
-
Paul Durrant authored
When the frontend state changes netback now specifies its desired state to a new function, set_backend_state(), which transitions through any necessary intermediate states. This fixes an issue observed with some old Windows frontend drivers where they failed to transition through the Closing state and netback would not behave correctly. Signed-off-by:
Paul Durrant <paul.durrant@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paul Marks authored
Consider the scenario where an IPv6 router is advertising a fixed preferred_lft of 1800 seconds, while the valid_lft begins at 3600 seconds and counts down in realtime. A client should reset its preferred_lft to 1800 every time the RA is received, but a bug is causing Linux to ignore the update. The core problem is here: if (prefered_lft != ifp->prefered_lft) { Note that ifp->prefered_lft is an offset, so it doesn't decrease over time. Thus, the comparison is always (1800 != 1800), which fails to trigger an update. The most direct solution would be to compute a "stored_prefered_lft", and use that value in the comparison. But I think that trying to filter out unnecessary updates here is a premature optimization. In order for the filter to apply, both of these would need to hold: - The advertised valid_lft and preferred_lft are both declining in real time. - No clock skew exists between the router & client. So in this patch, I've set "update_lft = 1" unconditionally, which allows the surrounding code to be greatly simplified. Signed-off-by:Paul Marks <pmarks@google.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Pravin B Shelar authored
While sending packet skb_cow_head() can change skb header which invalidates inner_iph pointer to skb header. Following patch avoid using it. Found by code inspection. This bug was introduced by commit 0e6fbc5b (ip_tunnels: extend iptunnel_xmit()). Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Aleksander Morgado authored
Cinterion PLXX LTE devices have a 0x0060 product ID, not 0x12d1. The blacklisting in the serial/option driver does actually use the correct PID, as per commit 8ff10bdb ('USB: Blacklisted Cinterion's PLxx WWAN Interface'). CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> CC: Christian Schmiedl <christian.schmiedl@gemalto.com> CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com> Signed-off-by:
Aleksander Morgado <aleksander@lanedo.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Acked-by:
Christian Schmiedl <christian.schmiedl@gemalto.com> Signed-off-by:
-
Aida Mynzhasova authored
Currently IEEE 1588 timer reference clock source is determined through hard-coded value in gianfar_ptp driver. This patch allows to select ptp clock source by means of device tree file node. For instance: fsl,cksel = <0>; for using external (TSEC_TMR_CLK input) high precision timer reference clock. Other acceptable values: <1> : eTSEC system clock <2> : eTSEC1 transmit clock <3> : RTC clock input When this attribute isn't used, eTSEC system clock will serve as IEEE 1588 timer reference clock. Signed-off-by:
Aida Mynzhasova <aida.mynzhasova@skitlab.ru> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Pravin B Shelar authored
Use of RCU api makes vxlan code easier to understand. It also fixes bug due to missing ACCESS_ONCE() on sk_user_data dereference. In rare case without ACCESS_ONCE() compiler might omit vs on sk_user_data dereference. Compiler can use vs as alias for sk->sk_user_data, resulting in multiple sk_user_data dereference in rcu read context which could change. CC: Jesse Gross <jesse@nicira.com> Signed-off-by:
-
- 28 Sep, 2013 4 commits
-
-
Eric Dumazet authored
A host might need net_secret[] and never open a single socket. Problem added in commit aebda156 ("net: defer net_secret[] initialization") Based on prior patch from Hannes Frederic Sowa. Reported-by:
Hannes Frederic Sowa <hannes@strressinduktion.org> Signed-off-by:
-
Eric W. Biederman authored
There is currently serialization network namespaces exiting and network devices exiting as the final part of netdev_run_todo does not happen under the rtnl_lock. This is compounded by the fact that the only list of devices unregistering in netdev_run_todo is local to the netdev_run_todo. This lack of serialization in extreme cases results in network devices unregistering in netdev_run_todo after the loopback device of their network namespace has been freed (making dst_ifdown unsafe), and after the their network namespace has exited (making the NETDEV_UNREGISTER, and NETDEV_UNREGISTER_FINAL callbacks unsafe). Add the missing serialization by a per network namespace count of how many network devices are unregistering and having a wait queue that is woken up whenever the count is decreased. The count and wait queue allow default_device_exit_batch to wait until all of the unregistration activity for a network namespace has finished before proceeding to unregister the loopback device and then allowing the network namespace to exit. Only a single global wait queue is used because there is a single global lock, and there is a single waiter, per network namespace wait queues would be a waste of resources. The per network namespace count of unregistering devices gives a progress guarantee because the number of network devices unregistering in an exiting network namespace must ultimately drop to zero (assuming network device unregistration completes). The basic logic remains the same as in v1. This patch is now half comment and half rtnl_lock_unregistering an expanded version of wait_event performs no extra work in the common case where no network devices are unregistering when we get to default_device_exit_batch. Reported-by:
Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Catalin\(ux\) M. BOIE authored
When a router is doing DNAT for 6to4/6rd packets the latest anti-spoofing commit 218774dc ("ipv6: add anti-spoofing checks for 6to4 and 6rd") will drop them because the IPv6 address embedded does not match the IPv4 destination. This patch will allow them to pass by testing if we have an address that matches on 6to4/6rd interface. I have been hit by this problem using Fedora and IPV6TO4_IPV4ADDR. Also, log the dropped packets (with rate limit). Signed-off-by:
Catalin(ux) M. BOIE <catab@embedromix.ro> Acked-by:
-
Ming Lei authored
Commit 638c5115(USBNET: support DMA SG) introduces DMA SG if the usb host controller is capable of building packet from discontinuous buffers, but missed handling padding packet when building DMA SG. This patch attachs the pre-allocated padding packet at the end of the sg list, so padding packet can be sent to device if drivers require that. Reported-by:
David Laight <David.Laight@aculab.com> Acked-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
- 27 Sep, 2013 18 commits
-
-
Sucheta Chakraborty authored
o Commit 7e2cf4fe ("qlcnic: change driver hardware interface mechanism") has overwritten commit b43e5ee7 ("qlcnic: Register device in FAILED state") Signed-off-by:
Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by:
-
Ajit Khaparde authored
VLAN priority is not being displayed for a VF currently when user executes "ip link show" command. This patch fixes it. Signed-off-by:
Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by:
-
Ajit Khaparde authored
Thix fix allows the VLAN priority to be configured for a VF interface via the "ip link set DEVICE vf NUM" path. Signed-off-by:
-
Ajit Khaparde authored
Now the VF interfaces have privilege to add VLANs. Allow VLANs to be configured on these interfaces. Signed-off-by:
-
Ajit Khaparde authored
In BE3-R, when UMC is enabled, the number of VLANs that can be added to the interface is reduced to 15. Signed-off-by:
-
Ajit Khaparde authored
When the interface runs out of the allocated entries in VLAN table, we program the interface in VLAN promiscuous mode. Use OPCODE_COMMON_NTWK_RX_FILTER to set VLAN Promiscuous mode instead of OPCODE_COMMON_NTWK_VLAN_CONFIG. Signed-off-by:
-
Ajit Khaparde authored
Size of be_nic_res_desc structure is incorrect. Fix it. Signed-off-by:
-
Ajit Khaparde authored
Tx on SH-R can lockup if the packet size is less than 32 bytes. Pad such packets to a safer 36-byte size. Patch uses the Lancer-R workaround - which checks for packet <= 32-bytes Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== Regarding the Bluetooth bits, Gustavo says: "First Bluetooth fixes to 3.12, it includes: * 3 patches to add device id for 3 new hardwares. * 2 patches from Johan to fix the rfkill behaviour during setup stage * a small clean up in the rfcomm TTY code that fixes a potential racy condition (by Gianluca Anzolin) * 2 fixes to proper set encryption key size and security level in the peripheral role of Bluetooth LE devices. (by Andre Guedes) * a fix for dealing devices where pairing is not necessary, we were keeping the Bluetooth ACL connection alive for too much time. (by Syam Sidhardhan)" Also, I fixed-up an curly-brace indentation problem in the Bluetooth code while merging. On top of that... Alexey Khoroshilov brings a p54usb fix to avoid a resource leak when request_firmware_nowait fails. Amitkumar Karwar fixes a firmware hang caused by too much header data being appended for USB devices using the mwifiex driver. Arend van Spriel provides three fixes: a brcmfmac fix to relocate some driver code outside of an .init section; a scheduling while atomic fix for bcma; and, another scheduling while atomic fix for brcmsmac. Bing Zhao offers a pair of mwifiex fixes: a code change to avoid firmware timeouts on USB; and a fix for a NULL pointer dereference. Christian Lamparter adds a device ID to p54usb. Felix Fietkau implements a quartet of small ath9k fixes, including a locking fix, a list management fix, a fix to properly mark a stale buffer, and an aggregate buffering fix. Larry Finger champions a data alignment fix to make rtlwifi work better with ARM builds. Solomon Peachy reverts an earlier interrupt handling fix for cw1200 and replaces it with a new threaded oneshot irq handler implementation. Sujith Manoharan fixes an ath9k regression by reverting an earlier patch. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/netDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to igb and i40e. Todd provides a fix for 82580 devices in igb, where the ethtool loopback test was missing 82580 copper devices. Jesse provides five fixes/cleanups to i40e based on feedback from Joe Perches and the community. v2: fixed up patch 5 in the series based on feedback from Joe Perches and David Miller ==================== Signed-off-by: -
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem Also fixed-up a badly indented closing brace... Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Jesse Brandeburg authored
coccicheck shows: drivers/net/ethernet/intel/i40e/i40e_adminq.c:704:2-8: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_adminq.c:763:1-7: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_adminq.c:810:2-8: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_common.c:510:2-8: Replace memcpy with struct assignment Fix each of them with a *a = *b; Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jesse Brandeburg authored
As mentioned by Joe Perches, clean up return values in some functions making sure to have consistent return types, not mixing types. A couple of Joe's comments suggested returning void, but since the functions in question are ndo defined, the return values are fixed. So make a comment in the header that notes this is a function called by net_device_ops. v2: fix post increment bug in return CC: Joe Perches <joe@perches.com> Signed-off-by:
-
Jesse Brandeburg authored
When calling admin queue functions the driver should use aq_ret variable to help make clear that the return value is not a regular return variable. This allows for clean up of the return types that were previously converted to int. Signed-off-by:
-
Jesse Brandeburg authored
As mentioned by Joe Perches clean up a loop flow. Signed-off-by:
-
Jesse Brandeburg authored
As mentioned by Joe Perches, we should be using foo = alloc(...) if (!foo) return -ENOMEM; return 0; Signed-off-by:
-
Todd Fujinaka authored
Add back 82580 loopback tests to ethtool. Signed-off-by:
Todd Fujinaka <todd.fujinaka@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
-
- 26 Sep, 2013 12 commits
-
-
Roger Luethi authored
Outgoing packets sent by via-rhine have their VLAN PCP field off by one (when hardware acceleration is enabled). The TX descriptor expects only VID and PCP (without a CFI/DEI bit). Peter Boström noticed and reported the bug. Signed-off-by:
Roger Luethi <rl@hellgate.ch> Cc: Peter Boström <peter.bostrom@netrounds.com> Signed-off-by:
-
Arend van Spriel authored
This patch adds explicit call to bcma_core_pci_power_save() from a non-atomic context resolving 'scheduling while atomic' issue. [ 13.224317] BUG: scheduling while atomic: dhcpcd/1800/0x00000202 [ 13.224322] Modules linked in: brcmsmac nouveau coretemp kvm_intel kvm cordic brcmutil bcma dell_wmi atl1c ttm mxm_wmi wmi [ 13.224354] CPU: 0 PID: 1800 Comm: dhcpcd Tainted: G W 3.11.0-wl #1 [ 13.224359] Hardware name: Alienware M11x R2/M11x R2, BIOS A04 11/23/2010 [ 13.224363] ffff880177c12c40 ffff880170fd1968 ffffffff8169af5b 0000000000000007 [ 13.224374] ffff880170fd1ad0 ffff880170fd1978 ffffffff81697ee2 ffff880170fd19f8 [ 13.224383] ffffffff816a19f5 00000000000f4240 000000000000d080 ffff880170fd1fd8 [ 13.224391] Call Trace: [ 13.224399] [<ffffffff8169af5b>] dump_stack+0x4f/0x84 [ 13.224403] [<ffffffff81697ee2>] __schedule_bug+0x43/0x51 [ 13.224409] [<ffffffff816a19f5>] __schedule+0x6e5/0x810 [ 13.224412] [<ffffffff816a1c34>] schedule+0x24/0x70 [ 13.224416] [<ffffffff816a04fc>] schedule_hrtimeout_range_clock+0x10c/0x150 [ 13.224420] [<ffffffff810684e0>] ? update_rmtp+0x60/0x60 [ 13.224424] [<ffffffff8106915f>] ? hrtimer_start_range_ns+0xf/0x20 [ 13.224429] [<ffffffff816a054e>] schedule_hrtimeout_range+0xe/0x10 [ 13.224432] [<ffffffff8104f6fb>] usleep_range+0x3b/0x40 [ 13.224437] [<ffffffffa003733a>] bcma_pcie_mdio_read.isra.5+0x8a/0x100 [bcma] [ 13.224442] [<ffffffffa00374a5>] bcma_pcie_mdio_writeread.isra.6.constprop.13+0x25/0x30 [bcma] [ 13.224448] [<ffffffffa00374f9>] bcma_core_pci_power_save+0x49/0x80 [bcma] [ 13.224452] [<ffffffffa003765d>] bcma_core_pci_up+0x2d/0x60 [bcma] [ 13.224460] [<ffffffffa03dc17c>] brcms_c_up+0xfc/0x430 [brcmsmac] [ 13.224467] [<ffffffffa03d1a7d>] brcms_up+0x1d/0x20 [brcmsmac] [ 13.224473] [<ffffffffa03d2498>] brcms_ops_start+0x298/0x340 [brcmsmac] [ 13.224478] [<ffffffff81600a12>] ? cfg80211_netdev_notifier_call+0xd2/0x5f0 [ 13.224483] [<ffffffff815fa53d>] ? packet_notifier+0xad/0x1d0 [ 13.224487] [<ffffffff81656e75>] ieee80211_do_open+0x325/0xf80 [ 13.224491] [<ffffffff8106ac09>] ? __raw_notifier_call_chain+0x9/0x10 [ 13.224495] [<ffffffff81657b41>] ieee80211_open+0x71/0x80 [ 13.224498] [<ffffffff81526267>] __dev_open+0x87/0xe0 [ 13.224502] [<ffffffff8152650c>] __dev_change_flags+0x9c/0x180 [ 13.224505] [<ffffffff815266a3>] dev_change_flags+0x23/0x70 [ 13.224509] [<ffffffff8158cd68>] devinet_ioctl+0x5b8/0x6a0 [ 13.224512] [<ffffffff8158d5c5>] inet_ioctl+0x75/0x90 [ 13.224516] [<ffffffff8150b38b>] sock_do_ioctl+0x2b/0x70 [ 13.224519] [<ffffffff8150b681>] sock_ioctl+0x71/0x2a0 [ 13.224523] [<ffffffff8114ed47>] do_vfs_ioctl+0x87/0x520 [ 13.224528] [<ffffffff8113f159>] ? ____fput+0x9/0x10 [ 13.224533] [<ffffffff8106228c>] ? task_work_run+0x9c/0xd0 [ 13.224537] [<ffffffff8114f271>] SyS_ioctl+0x91/0xb0 [ 13.224541] [<ffffffff816aa252>] system_call_fastpath+0x16/0x1b Cc: <stable@vger.kernel.org> # 3.11.x Cc: Tod Jackson <tod.jackson@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
This patch removes the bcma_core_pci_power_save() call from the bcma_core_pci_{up,down}() functions as it tries to schedule thus requiring to call them from non-atomic context. The function bcma_core_pci_power_save() is now exported so the calling module can explicitly use it in non-atomic context. This fixes the 'scheduling while atomic' issue reported by Tod Jackson and Joe Perches. [ 13.210710] BUG: scheduling while atomic: dhcpcd/1800/0x00000202 [ 13.210718] Modules linked in: brcmsmac nouveau coretemp kvm_intel kvm cordic brcmutil bcma dell_wmi atl1c ttm mxm_wmi wmi [ 13.210756] CPU: 2 PID: 1800 Comm: dhcpcd Not tainted 3.11.0-wl #1 [ 13.210762] Hardware name: Alienware M11x R2/M11x R2, BIOS A04 11/23/2010 [ 13.210767] ffff880177c92c40 ffff880170fd1948 ffffffff8169af5b 0000000000000007 [ 13.210777] ffff880170fd1ab0 ffff880170fd1958 ffffffff81697ee2 ffff880170fd19d8 [ 13.210785] ffffffff816a19f5 00000000000f4240 000000000000d080 ffff880170fd1fd8 [ 13.210794] Call Trace: [ 13.210813] [<ffffffff8169af5b>] dump_stack+0x4f/0x84 [ 13.210826] [<ffffffff81697ee2>] __schedule_bug+0x43/0x51 [ 13.210837] [<ffffffff816a19f5>] __schedule+0x6e5/0x810 [ 13.210845] [<ffffffff816a1c34>] schedule+0x24/0x70 [ 13.210855] [<ffffffff816a04fc>] schedule_hrtimeout_range_clock+0x10c/0x150 [ 13.210867] [<ffffffff810684e0>] ? update_rmtp+0x60/0x60 [ 13.210877] [<ffffffff8106915f>] ? hrtimer_start_range_ns+0xf/0x20 [ 13.210887] [<ffffffff816a054e>] schedule_hrtimeout_range+0xe/0x10 [ 13.210897] [<ffffffff8104f6fb>] usleep_range+0x3b/0x40 [ 13.210910] [<ffffffffa00371af>] bcma_pcie_mdio_set_phy.isra.3+0x4f/0x80 [bcma] [ 13.210921] [<ffffffffa003729f>] bcma_pcie_mdio_write.isra.4+0xbf/0xd0 [bcma] [ 13.210932] [<ffffffffa0037498>] bcma_pcie_mdio_writeread.isra.6.constprop.13+0x18/0x30 [bcma] [ 13.210942] [<ffffffffa00374ee>] bcma_core_pci_power_save+0x3e/0x80 [bcma] [ 13.210953] [<ffffffffa003765d>] bcma_core_pci_up+0x2d/0x60 [bcma] [ 13.210975] [<ffffffffa03dc17c>] brcms_c_up+0xfc/0x430 [brcmsmac] [ 13.210989] [<ffffffffa03d1a7d>] brcms_up+0x1d/0x20 [brcmsmac] [ 13.211003] [<ffffffffa03d2498>] brcms_ops_start+0x298/0x340 [brcmsmac] [ 13.211020] [<ffffffff81600a12>] ? cfg80211_netdev_notifier_call+0xd2/0x5f0 [ 13.211030] [<ffffffff815fa53d>] ? packet_notifier+0xad/0x1d0 [ 13.211064] [<ffffffff81656e75>] ieee80211_do_open+0x325/0xf80 [ 13.211076] [<ffffffff8106ac09>] ? __raw_notifier_call_chain+0x9/0x10 [ 13.211086] [<ffffffff81657b41>] ieee80211_open+0x71/0x80 [ 13.211101] [<ffffffff81526267>] __dev_open+0x87/0xe0 [ 13.211109] [<ffffffff8152650c>] __dev_change_flags+0x9c/0x180 [ 13.211117] [<ffffffff815266a3>] dev_change_flags+0x23/0x70 [ 13.211127] [<ffffffff8158cd68>] devinet_ioctl+0x5b8/0x6a0 [ 13.211136] [<ffffffff8158d5c5>] inet_ioctl+0x75/0x90 [ 13.211147] [<ffffffff8150b38b>] sock_do_ioctl+0x2b/0x70 [ 13.211155] [<ffffffff8150b681>] sock_ioctl+0x71/0x2a0 [ 13.211169] [<ffffffff8114ed47>] do_vfs_ioctl+0x87/0x520 [ 13.211180] [<ffffffff8113f159>] ? ____fput+0x9/0x10 [ 13.211198] [<ffffffff8106228c>] ? task_work_run+0x9c/0xd0 [ 13.211202] [<ffffffff8114f271>] SyS_ioctl+0x91/0xb0 [ 13.211208] [<ffffffff816aa252>] system_call_fastpath+0x16/0x1b [ 13.211217] NOHZ: local_softirq_pending 202 The issue was introduced in v3.11 kernel by following commit: commit aa51e598 Author: Hauke Mehrtens <hauke@hauke-m.de> Date: Sat Aug 24 00:32:31 2013 +0200 brcmsmac: use bcma PCIe up and down functions replace the calls to bcma_core_pci_extend_L1timer() by calls to the newly introduced bcma_core_pci_ip() and bcma_core_pci_down() Signed-off-by:Hauke Mehrtens <hauke@hauke-m.de> Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The driver uses platform_driver_probe() to obtain platform data if any. However, that function is placed in the .init section so it must be called upon driver module initialization. The problem was reported by Fenguang Wu resulting in a kernel oops because the .init section was already freed. [ 48.966342] Switched to clocksource tsc [ 48.970002] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 48.970851] BUG: unable to handle kernel paging request at ffffffff82196446 [ 48.970957] IP: [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] PGD 1e76067 PUD 1e77063 PMD f388063 PTE 8000000002196163 [ 48.970957] Oops: 0011 [#1] [ 48.970957] CPU: 0 PID: 17 Comm: kworker/0:1 Not tainted 3.11.0-rc7-00444-gc52dd7f #23 [ 48.970957] Workqueue: events brcmf_driver_init [ 48.970957] task: ffff8800001d2000 ti: ffff8800001d4000 task.ti: ffff8800001d4000 [ 48.970957] RIP: 0010:[<ffffffff82196446>] [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] RSP: 0000:ffff8800001d5d40 EFLAGS: 00000286 [ 48.970957] RAX: 0000000000000001 RBX: ffffffff820c5620 RCX: 0000000000000000 [ 48.970957] RDX: 0000000000000001 RSI: ffffffff816f7380 RDI: ffffffff820c56c0 [ 48.970957] RBP: ffff8800001d5d50 R08: ffff8800001d2508 R09: 0000000000000002 [ 48.970957] R10: 0000000000000000 R11: 0001f7ce298c5620 R12: ffff8800001c76b0 [ 48.970957] R13: ffffffff81e91d40 R14: 0000000000000000 R15: ffff88000e0ce300 [ 48.970957] FS: 0000000000000000(0000) GS:ffffffff81e84000(0000) knlGS:0000000000000000 [ 48.970957] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 48.970957] CR2: ffffffff82196446 CR3: 0000000001e75000 CR4: 00000000000006b0 [ 48.970957] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.970957] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 [ 48.970957] Stack: [ 48.970957] ffffffff816f7df8 ffffffff820c5620 ffff8800001d5d60 ffffffff816eeec9 [ 48.970957] ffff8800001d5de0 ffffffff81073dc5 ffffffff81073d68 ffff8800001d5db8 [ 48.970957] 0000000000000086 ffffffff820c5620 ffffffff824f7fd0 0000000000000000 [ 48.970957] Call Trace: [ 48.970957] [<ffffffff816f7df8>] ? brcmf_sdio_init+0x18/0x70 [ 48.970957] [<ffffffff816eeec9>] brcmf_driver_init+0x9/0x10 [ 48.970957] [<ffffffff81073dc5>] process_one_work+0x1d5/0x480 [ 48.970957] [<ffffffff81073d68>] ? process_one_work+0x178/0x480 [ 48.970957] [<ffffffff81074188>] worker_thread+0x118/0x3a0 [ 48.970957] [<ffffffff81074070>] ? process_one_work+0x480/0x480 [ 48.970957] [<ffffffff8107aa17>] kthread+0xe7/0xf0 [ 48.970957] [<ffffffff810829f7>] ? finish_task_switch.constprop.57+0x37/0xd0 [ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80 [ 48.970957] [<ffffffff81a6923a>] ret_from_fork+0x7a/0xb0 [ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80 [ 48.970957] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc <cc> cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc [ 48.970957] RIP [<ffffffff82196446>] classes_init+0x26/0x26 [ 48.970957] RSP <ffff8800001d5d40> [ 48.970957] CR2: ffffffff82196446 [ 48.970957] ---[ end trace 62980817cd525f14 ]--- Cc: <stable@vger.kernel.org> # 3.10.x, 3.11.x Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Tested-by:
-
Bing Zhao authored
Bug 60815 - Interface hangs in mwifiex_usb https://bugzilla.kernel.org/show_bug.cgi?id=60815 [ 2.883807] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 2.883813] IP: [<ffffffff815a65e0>] pfifo_fast_enqueue+0x90/0x90 [ 2.883834] CPU: 1 PID: 3220 Comm: kworker/u8:90 Not tainted 3.11.1-monotone-l0 #6 [ 2.883834] Hardware name: Microsoft Corporation Surface with Windows 8 Pro/Surface with Windows 8 Pro, BIOS 1.03.0450 03/29/2013 On Surface Pro, suspend to ram gives a NULL pointer dereference in pfifo_fast_enqueue(). The stack trace reveals that the offending call is clearing carrier in mwifiex_usb suspend handler. Since commit 1499d9fa "mwifiex: don't drop carrier flag over suspend" has removed the carrier flag handling over suspend/resume in SDIO and PCIe drivers, I'm removing it in USB driver too. This also fixes the bug for Surface Pro. Cc: <stable@vger.kernel.org> # 3.5+ Tested-by:
Dmitry Khromov <icechrome@gmail.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
Bug 60815 - Interface hangs in mwifiex_usb https://bugzilla.kernel.org/show_bug.cgi?id=60815 We have 4 bytes of interface header for packets delivered to SDIO and PCIe, but not for USB interface. In Tx AMSDU case, currently 4 bytes of garbage data is unnecessarily appended for USB packets. This sometimes leads to a firmware hang, because it may not interpret the data packet correctly. Problem is fixed by removing this redundant headroom for USB. Cc: <stable@vger.kernel.org> # 3.5+ Tested-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Christian Lamparter authored
Added USB ID for Corega WLUSB2GTST USB adapter. Cc: <stable@vger.kernel.org> Reported-by:
Joerg Kalisch <the_force@gmx.de> Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Solomon Peachy authored
This supercedes the older patch ("cw1200: Don't perform SPI transfers in interrupt context") that badly attempted to fix this problem. This is a far simpler solution, which has the added benefit of actually working. Signed-off-by:Solomon Peachy <pizza@shaftnet.org> Signed-off-by:
-
Solomon Peachy authored
This reverts commit aec8e88c. This solution turned out to cause interrupt delivery problems, and rather than trying to fix this approach, it has been scrapped in favor of an alternative (and far simpler) implementation. Signed-off-by:
-
Bing Zhao authored
For pcie8897, the hs_cfg cancel command (0xe5) times out when host comes out of suspend. This is caused by an incompleted host sleep handshake between driver and firmware. Like SDIO interface, PCIe also needs to go through firmware power save events to complete the handshake for host sleep configuration. Only USB interface doesn't require power save events for hs_cfg. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by:
-
Larry Finger authored
The private array at the end of the rtl_priv struct is not aligned. On ARM architecture, this causes an alignment trap and is fixed by aligning that array with __align(sizeof(void *)). That should properly align that space according to the requirements of all architectures. Reported-by:
Jason Andrews <jasona@cadence.com> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by:
-
Felix Fietkau authored
Prevents race conditions when un-aggregated frames are pending in the driver. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
