- 21 Jun, 2023 2 commits
-
-
Takashi Iwai authored
This is another preliminary patch for USB MIDI 2.0 gadget driver. Add a new flag, no_process_stream, to snd_ump for suppressing the UMP Stream message handling in UMP core. Link: https://lore.kernel.org/r/20230621110241.4751-3-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
This is a preliminary patch for MIDI 2.0 USB gadget driver. Export a new helper to allow changing the current MIDI protocol from the outside. Link: https://lore.kernel.org/r/20230621110241.4751-2-tiwai@suse.deSigned-off-by:
-
- 12 Jun, 2023 10 commits
-
-
Takashi Iwai authored
There have been a few enhancements for the new UMP 1.1 features. Update the documentation accordingly. Link: https://lore.kernel.org/r/20230612081054.17200-11-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
UMP v1.1 spec allows to inform whether the function blocks are static and not dynamically updated. Add a new flag bit to snd_ump_endpoint_info to reflect that attribute, too. The flag is set when a USB MIDI device is still in the old MIDI 2.0 without UMP 1.1 support. Then the driver falls back to GTBs, and they are supposed to be static-only. Link: https://lore.kernel.org/r/20230612081054.17200-10-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
UMP v1.1 supports the protocol switch via a UMP Stream message. When it's received, we need to take care of the midi_version field in the corresponding sequencer client, too. This patch introduces a new ops to notify the protocol change to snd_seq_ump_ops for handling it. Link: https://lore.kernel.org/r/20230612081054.17200-9-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
For allowing applications to track the FB active changes, this patch adds the notification from the system port at each time a FB change is handled and the active flag or re-grouping happens. Link: https://lore.kernel.org/r/20230612081054.17200-8-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
This patch implements the handling of the dynamic update of FB info. When the FB info update is received after the initial parsing, it means the dynamic FB info update. We compare the result, and if the actual update is detected, it's notified via a new ops, notify_fb_change, to the sequencer client, and the corresponding sequencer ports are updated accordingly. Link: https://lore.kernel.org/r/20230612081054.17200-7-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The UMP Utility and Stream messages are "groupless", i.e. an incoming groupless packet should be sent only to the UMP EP port, and the event with the groupless message is sent to UMP EP as is without the group translation per port. Also, the former reserved bit 0 for the client group filter is now used for groupless events. When the bit 0 is set, the groupless events are filtered out and skipped. Link: https://lore.kernel.org/r/20230612081054.17200-6-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Add a new option to enable/disable the UMP Endpoint probing. Some firmware seems screwed up when such a new command issued, and this option allows user to suppress it. Link: https://lore.kernel.org/r/20230612081054.17200-5-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Try to parse the UMP Endpoint and UMP Function Blocks for building the topology at first. Only when those are missing (e.g. on an older USB MIDI 2.0 spec or a unidirectional endpoint), the driver still creates blocks based on USB group terminal block information as fallback. Link: https://lore.kernel.org/r/20230612081054.17200-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
This patch adds the basic support for UMP Endpoint and UMP Function Block parsing, which are extended in the new UMP v1.1 spec. The patch provides a new helper function to perform the query of the UMP Endpoint information and builds up the UMP blocks based on UMP Function Block information. For the communication over the UMP Endpoint, it opens the rawmidi device once internally, inquiries the UMP Endpoint and Function Block info by sending new UMP Stream messages, and waits for the response for each query. The new UMP spec allows to update the FB info and change its associated groups or its activeness on the fly, too. For catching it, the UMP core keeps watching the incoming UMP messages, and snd_ump_receive() handles the incoming UMP Stream messages to refresh the FB info. Link: https://lore.kernel.org/r/20230612081054.17200-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Add a few more fields to snd_ump_endpoint_info and snd_ump_block_info that are added in the new v1.1 spec. Those are filled by the UMP Stream messages. The rawmidi protocol version is bumped to 2.0.4 to indicate those updates. Also, update the proc outputs to show the newly introduced fields. Link: https://lore.kernel.org/r/20230612081054.17200-2-tiwai@suse.deSigned-off-by:
-
- 05 Jun, 2023 2 commits
-
-
Takashi Iwai authored
Currently the read event packet size in snd_seq_read() is defined by client->midi_version value that is guaranteed to be zero if UMP isn't enabled. But the static analyzer doesn't know of the fact, and it still suspects as if it were leading to a potential overflow. Add the more explicit check of CONFIG_SND_SEQ_UMP to determine the aligned_size value for avoiding the confusion. Fixes: 46397622 ("ALSA: seq: Add UMP support") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202305261415.NY0vapZK-lkp@intel.com/ Link: https://lore.kernel.org/r/20230605144758.6677-2-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Use proper notion for 16bit values for fixing the sparse warnings. Fixes: f8ddb0fb ("ALSA: usb-audio: Define USB MIDI 2.0 specs") Reported-by:
-
- 25 May, 2023 2 commits
-
-
Takashi Iwai authored
The MIDI 1.0 parser retrieved the 0xFx command with a wrong bit shift, resulting in the bogus type. Fix the bit shift size. Fixes: 0b5288f5 ("ALSA: ump: Add legacy raw MIDI support") Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/0fbc0b27-54b8-4cda-800e-37e7a03fed39@kili.mountainSuggested-by:
-
Takashi Iwai authored
The check of a note-on event with zero velocity is done twice, and the latter one is superfluous. Let's drop it. Fixes: 0b5288f5 ("ALSA: ump: Add legacy raw MIDI support") Reported-by:
-
- 24 May, 2023 1 commit
-
-
Stephen Rothwell authored
The #endif is placed obviously at a wrong position, which caused a build error on the big endian machine. Fixes: 0b5288f5 ("ALSA: ump: Add legacy raw MIDI support") Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20230524135448.3ecad334@canb.auug.org.auSigned-off-by:
-
- 23 May, 2023 23 commits
-
-
Takashi Iwai authored
Add the brief document for describing the MIDI 2.0 implementation on Linux kernel. Both rawmidi and sequencer API extensions are described. Acked-by:
Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230523075358.9672-38-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Add a new filter bitmap for UMP groups for reducing the unnecessary read/write when the client is connected to UMP EP seq port. The new group_filter field contains the bitmap for the groups, i.e. when the bit is set, the corresponding group is filtered out and the messages to that group won't be delivered. The filter bitmap consists of each bit of 1-based UMP Group number. The bit 0 is reserved for the future use. Reviewed-by:
-
Takashi Iwai authored
This patch enhances the /proc/asound/seq/clients output to show a few more information about the assigned UMP Endpoint and Blocks. The "Groups" are shown in 1-based group number to align with the sequencer client name and port number. Reviewed-by:
-
Takashi Iwai authored
Add new ioctls for sequencer clients to query and set the UMP endpoint and block information. As a sequencer client corresponds to a UMP Endpoint, one UMP Endpoint information can be assigned at most to a single sequencer client while multiple UMP block infos can be assigned by passing the type with the offset of block id (i.e. type = block_id + 1). For the kernel client, only SNDRV_SEQ_IOCTL_GET_CLIENT_UMP_INFO is allowed. Reviewed-by:
-
Takashi Iwai authored
Create a sequencer port for broadcasting the all group inputs at the port number 0. This corresponds to a UMP Endpoint connection; application can read all UMP events from this port no matter which group the UMP packet belongs to. Unlike seq ports for other UMP groups, a UMP Endpoint port has no SND_SEQ_PORT_TYPE_MIDI_GENERIC bit, so that it won't be treated as a normal MIDI 1.0 device from legacy applications. The port is named as "MIDI 2.0" to align with representations on other operation systems. Reviewed-by:
-
Takashi Iwai authored
This patch introduces a new ALSA sequencer client for the kernel UMP object, snd-seq-ump-client. It's a UMP version of snd-seq-midi driver, while this driver creates a sequencer client per UMP endpoint which contains (fixed) 16 ports. The UMP rawmidi device is opened in APPEND mode for output, so that multiple sequencer clients can share the same UMP endpoint, as well as the legacy UMP rawmidi devices that are opened in APPEND mode, too. For input, on the other hand, the incoming data is processed on the fly in the dedicated hook, hence it doesn't open a rawmidi device. The UMP packet group is updated upon delivery depending on the target sequencer port (which corresponds to the actual UMP group). Each sequencer port sets a new port type bit, SNDRV_SEQ_PORT_TYPE_MIDI_UMP, in addition to the other standard types for MIDI. Reviewed-by:
-
Takashi Iwai authored
A sequencer client like seq_dummy rather doesn't want to convert UMP events but receives / sends as is. Add a new event filter flag to suppress the automatic UMP conversion and applies accordingly. Reviewed-by:
-
Takashi Iwai authored
This patch enables the automatic conversion of UMP events from/to the legacy ALSA sequencer MIDI events. Also, as UMP itself has two different modes (MIDI 1.0 and MIDI 2.0), yet another converters between them are needed, too. Namely, we have conversions between the legacy and UMP like: - seq legacy event -> seq UMP MIDI 1.0 event - seq legacy event -> seq UMP MIDI 2.0 event - seq UMP MIDI 1.0 event -> seq legacy event - seq UMP MIDI 2.0 event -> seq legacy event and the conversions between UMP MIDI 1.0 and 2.0 clients like: - seq UMP MIDI 1.0 event -> seq UMP MIDI 2.0 event - seq UMP MIDI 2.0 event -> seq UMP MIDI 1.0 event The translation is per best-effort; some MIDI 2.0 specific events are ignored when translated to MIDI 1.0. Reviewed-by:
-
Takashi Iwai authored
Add yet more new filed "ump_group" to snd_seq_port_info for specifying the associated UMP Group number for each sequencer port. This will be referred in the upcoming automatic UMP conversion in sequencer core. Reviewed-by:
-
Takashi Iwai authored
Add a new field "direction" to snd_seq_port_info for allowing a client to tell the expected direction of the port access. A port might still allow subscriptions for read/write (e.g. for MIDI-CI) even if the primary usage of the port is a single direction (either input or output only). This new "direction" field can help to indicate such cases. When the direction is unspecified at creating a port and the port has either read or write capability, the corresponding direction bits are set automatically as default. Reviewed-by:
-
Takashi Iwai authored
This is an extension to ALSA sequencer infrastructure to support the MIDI 2.0 UMP Endpoint port. It's a "catch-all" port that is supposed to be present for each UMP Endpoint. When this port is read via subscription, it sends any events from all ports (UMP Groups) found in the same client. A UMP Endpoint port can be created with the new capability bit SNDRV_SEQ_PORT_CAP_UMP_ENDPOINT. Although the port assignment isn't strictly defined, it should be the port number 0. Reviewed-by:
-
Takashi Iwai authored
This extends the ALSA sequencer port capability bit to indicate the "inactive" flag. When this flag is set, the port is essentially invisible, and doesn't appear in the port query ioctls, while the direct access and the connection to this port are still allowed. The active/inactive state can be flipped dynamically, so that it can be visible at any time later. This feature is introduced basically for UMP; some UMP Groups in a UMP Block may be unassigned, hence those are practically invisible. On ALSA sequencer, the corresponding sequencer ports will get this new "inactive" flag to indicate the invisible state. Reviewed-by:
-
Takashi Iwai authored
Starting from this commit, we add the basic support of UMP (Universal MIDI Packet) events on ALSA sequencer infrastructure. The biggest change here is that, for transferring UMP packets that are up to 128 bits, we extend the data payload of ALSA sequencer event record when the client is declared to support for the new UMP events. A new event flag bit, SNDRV_SEQ_EVENT_UMP, is defined and it shall be set for the UMP packet events that have the larger payload of 128 bits, defined as struct snd_seq_ump_event. For controlling the UMP feature enablement in kernel, a new Kconfig, CONFIG_SND_SEQ_UMP is introduced. The extended event for UMP is available only when this Kconfig item is set. Similarly, the size of the internal snd_seq_event_cell also increases (in 4 bytes) when the Kconfig item is set. (But the size increase is effective only for 32bit architectures; 64bit archs already have padding there.) Overall, when CONFIG_SND_SEQ_UMP isn't set, there is no change in the event and cell, keeping the old sizes. For applications that want to access the UMP packets, first of all, a sequencer client has to declare the user-protocol to match with the latest one via the new SNDRV_SEQ_IOCTL_USER_PVERSION; otherwise it's treated as if a legacy client without UMP support. Then the client can switch to the new UMP mode (MIDI 1.0 or MIDI 2.0) with a new field, midi_version, in snd_seq_client_info. When switched to UMP mode (midi_version = 1 or 2), the client can write the UMP events with SNDRV_SEQ_EVENT_UMP flag. For reads, the alignment size is changed from snd_seq_event (28 bytes) to snd_seq_ump_event (32 bytes). When a UMP sequencer event is delivered to a legacy sequencer client, it's ignored or handled as an error. Conceptually, ALSA sequencer client and port correspond to the UMP Endpoint and Group, respectively; each client may have multiple ports and each port has the fixed number (16) of channels, total up to 256 channels. As of this commit, ALSA sequencer core just sends and receives the UMP events as-is from/to clients. The automatic conversions between the legacy events and the new UMP events will be implemented in a later patch. Along with this commit, bump the sequencer protocol version to 1.0.3. Reviewed-by:
-
Takashi Iwai authored
For the future extension of ALSA sequencer ABI, introduce a new ioctl SNDRV_SEQ_IOCTL_USER_PVERSION. This is similar like the ioctls used in PCM and other interfaces, for an application to specify its supporting ABI version. The use of this ioctl will be mandatory for the upcoming UMP support. Reviewed-by:
-
Takashi Iwai authored
Some port numbers are special, such as 254 for subscribers and 255 for broadcast. Return error if application tries to create such a port. Reviewed-by:
-
Takashi Iwai authored
The client type and the port info validity check should be done before actually creating a port, instead of unnecessary create-and-scratch. Reviewed-by:
-
Takashi Iwai authored
We didn't check if a port with the given port number has been already present at creating a new port. Check it and return -EBUSY properly if the port number conflicts. Reviewed-by:
-
Takashi Iwai authored
The broadcast and multicast supports have been never enabled. Let's drop the dead code. Reviewed-by:
-
Takashi Iwai authored
Introduce the new helpers, snd_seq_kernel_client_get() and _put() for kernel client drivers to treat the snd_seq_client more directly. This allows us to reduce the exported symbols and APIs at each time we need to access some field in future. Reviewed-by:
-
Takashi Iwai authored
Create a new variant of snd_seq_expand_var_event() for expanding the data starting from the given byte offset. It'll be used by the new UMP sequencer code later. Reviewed-by:
-
Takashi Iwai authored
There can be a small memory hole that may not be cleared at expanding an event with the variable length type. Make sure to clear it. Reviewed-by:
-
Takashi Iwai authored
When parsing Group Terminal Blocks, we overwrote the preferred protocol and the protocol capabilities silently from the last parsed GTB. This patch adds the information print indicating the unexpected overrides instead of silent action. Reviewed-by:
-
Takashi Iwai authored
Attach the legacy rawmidi devices when enabled in Kconfig accordingly. Reviewed-by:
-
