- 12 Oct, 2017 10 commits
-
-
Yoshihiro Shimoda authored
commit 0a2ce62b upstream. This patch fixes an issue that the usbhsf_fifo_clear() is possible to cause 10 msec delay if the pipe is RX direction and empty because the FRDY bit will never be set to 1 in such case. Fixes: e8d548d5 ("usb: renesas_usbhs: fifo became independent from pipe.") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yoshihiro Shimoda authored
commit 6124607a upstream. This patch fixes an issue that the driver sets the BCLR bit of {C,Dn}FIFOCTR register to 1 even when it's non-DCP pipe and the FRDY bit of {C,Dn}FIFOCTR register is set to 1. Fixes: e8d548d5 ("usb: renesas_usbhs: fifo became independent from pipe.") Signed-off-by:
-
Alan Stern authored
commit a4fd4a72 upstream. Ever since commit a621bac3 ("scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands"), people have been getting bogus error messages for USB disk drives using ATA pass-thru. For example: [ 1344.880193] sd 6:0:0:0: [sdb] Attached SCSI disk [ 1345.069152] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [ 1345.069159] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] [ 1345.069162] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information [ 1345.069168] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00 [ 1345.172252] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [ 1345.172258] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] [ 1345.172261] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information [ 1345.172266] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00 These messages can be quite annoying, because programs like udisks2 provoke them every 10 minutes or so. Other programs can also have this effect, such as those in smartmontools. I don't fully understand how that commit induced the SCSI core to log these error messages, but the underlying cause for them is code added to usb-storage by commit f1a0743b ("USB: storage: When a device returns no sense data, call it a Hardware Error"). At the time it was necessary to do this, in order to prevent an infinite retry loop with some not-so-great mass storage devices. However, the ATA pass-thru protocol uses SCSI sense data to return command status values, and some devices always report Check Condition status for ATA pass-thru commands to ensure that the host retrieves the sense data, even if the command succeeded. This violates the USB mass-storage protocol (Check Condition status is supposed to mean the command failed), but we can't help that. This patch attempts to mitigate the problem of these bogus error reports by changing usb-storage. The HARDWARE ERROR sense key will be inserted only for commands that aren't ATA pass-thru. Thanks to Ewan Milne for pointing out that this mechanism was present in usb-storage. 8 years after writing it, I had completely forgotten its existence. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Kris Lindgren <kris.lindgren@gmail.com> Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1351305 CC: Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Alan Stern authored
commit 113f6eb6 upstream. Kris Lindgren reports that without the NO_WP_DETECT flag, his Seagate external disk drive fails all write accesses. This regresssion dates back approximately to the start of the 4.x kernel releases. Signed-off-by:
-
Yoshihiro Shimoda authored
commit 447b8a01 upstream. This patch fixes an issue that this driver cannot go status stage in control read when the req.zero is set to 1 and the len in usb3_write_pipe() is set to 0. Otherwise, if we use g_ncm driver, usb enumeration takes long time (5 seconds or more). Fixes: 746bfe63 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Signed-off-by:
-
Yoshihiro Shimoda authored
commit 73f2f574 upstream. According to the datasheet of R-Car Gen3, the Pn_RAMMAP.Pn_MPKT should be set to one of 8, 16, 32, 64, 512 and 1024. Otherwise, when a gadget driver uses an interrupt endpoint, unexpected behavior happens. So, this patch fixes it. Fixes: 746bfe63 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Signed-off-by:
-
Yoshihiro Shimoda authored
commit 4dcf4bab upstream. When bRequestType & USB_DIR_IN is false and req.length is 0 in control transfer, since it means non-data, this driver should not set the mode as control write. So, this patch fixes it. Fixes: 746bfe63 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Signed-off-by:
-
Nicolas Ferre authored
commit 6baeda12 upstream. The driver triggers actions on both edges of the vbus signal. The former PIO controller was triggering IRQs on both falling and rising edges by default. Newer PIO controller don't, so it's better to set it explicitly to IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING. Without this patch we may trigger the connection with host but only on some bouncing signal conditions and thus lose connecting events. Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Alan Stern authored
commit 6e76c01e upstream. The gadgetfs driver as a long-outstanding FIXME, regarding a call of copy_to_user() made while holding a spinlock. This patch fixes the issue by dropping the spinlock and using the dev->udc_usage mechanism introduced by another recent patch to guard against status changes while the lock isn't held. Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
-
Alan Stern authored
commit 520b72fc upstream. The gadgetfs driver (drivers/usb/gadget/legacy/inode.c) was written before the UDC and composite frameworks were adopted; it is a legacy driver. As such, it expects that once bound to a UDC controller, it will not be unbound until it unregisters itself. However, the UDC framework does unbind function drivers while they are still registered. When this happens, it can cause the gadgetfs driver to misbehave or crash. For example, userspace can cause a crash by opening the device file and doing an ioctl call before setting up a configuration (found by Andrey Konovalov using the syzkaller fuzzer). This patch adds checks and synchronization to prevent these bad behaviors. It adds a udc_usage counter that the driver increments at times when it is using a gadget interface without holding the private spinlock. The unbind routine waits for this counter to go to 0 before returning, thereby ensuring that the UDC is no longer in use. The patch also adds a check in the dev_ioctl() routine to make sure the driver is bound to a UDC before dereferencing the gadget pointer, and it makes destroy_ep_files() synchronize with the endpoint I/O routines, to prevent the user from accessing an endpoint data structure after it has been removed. Signed-off-by:
-
- 08 Oct, 2017 30 commits
-
-
Greg Kroah-Hartman authored
-
Gerald Schaefer authored
commit 91c575b3 upstream. Commit 227be799 ("s390/mm: uninline pmdp_xxx functions from pgtable.h") inadvertently changed the behavior of pmdp_invalidate(), so that it now clears the pmd instead of just marking it as invalid. Fix this by restoring the original behavior. A possible impact of the misbehaving pmdp_invalidate() would be the MADV_DONTNEED races (see commits ced10803 and 58ceeb6b), although we should not have any negative impact on the related dirty/young flags, since those flags are not set by the hardware on s390. Fixes: 227be799 ("s390/mm: uninline pmdp_xxx functions from pgtable.h") Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
commit 69d3973a upstream. gcc-7.0.1 warns about old code in ttpci: In file included from drivers/media/pci/ttpci/av7110.c:63:0: In function 'irdebi.isra.2', inlined from 'start_debi_dma' at drivers/media/pci/ttpci/av7110.c:376:3, inlined from 'gpioirq' at drivers/media/pci/ttpci/av7110.c:659:3: drivers/media/pci/ttpci/av7110_hw.h:406:3: warning: 'memcpy': specified size between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=] memcpy(av7110->debi_virt, (char *) &res, count); In function 'irdebi.isra.2', inlined from 'start_debi_dma' at drivers/media/pci/ttpci/av7110.c:376:3, inlined from 'gpioirq' at drivers/media/pci/ttpci/av7110.c:668:3: drivers/media/pci/ttpci/av7110_hw.h:406:3: warning: 'memcpy': specified size between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=] memcpy(av7110->debi_virt, (char *) &res, count); Apparently, 'count' can be negative here, which will then get turned into a giant size argument for memcpy. Changing the sizes to 'unsigned int' instead seems safe as we already check for maximum sizes, and it also simplifies the code a bit. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Arnd Bergmann authored
commit 13f99ebd upstream. The latest gcc-7.0.1 snapshot points out that we if nr_ch is zero, we never initialize some variables: sound/pci/au88x0/au88x0_core.c: In function 'vortex_adb_allocroute': sound/pci/au88x0/au88x0_core.c:2304:68: error: 'mix[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized] sound/pci/au88x0/au88x0_core.c:2305:58: error: 'src[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized] I assume this can never happen in practice, but adding a check here doesn't hurt either and avoids the warning. The code has been unchanged since the start of git history. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Nicholas Mc Guire authored
commit 4281fcc0 upstream. Drop the const qualifier as it is being added by SOC_ENUM_DOUBLE_DECL() already which is called by SOC_ENUM_SINGLE_DECL() here. Fixes: commit 2b26dd4c ("ASoC: rt5660: add rt5660 codec driver") Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Nicholas Mc Guire authored
commit eae39b5f upstream. Drop the const qualifier as it is being added by SOC_ENUM_DOUBLE_DECL() already which is called by SOC_ENUM_SINGLE_DECL() as well as the double const by calls to SOC_VALUE_ENUM_SINGLE_DECL() via SOC_VALUE_ENUM_DOUBLE_DECL). Fixes: commit d3cb2de2 ("ASoC: rt5659: add rt5659 codec driver") Signed-off-by:
-
Arnd Bergmann authored
commit 03ba791d upstream. gcc-7 warns that there is a duplicate 'const' specifier in some variables that are declared using the SOC_ENUM_SINGLE_DECL macro: sound/soc/codecs/rt5514.c:398:14: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const SOC_ENUM_SINGLE_DECL( sound/soc/codecs/rt5514.c:405:14: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const SOC_ENUM_SINGLE_DECL( This removes one to fix the warning. Fixes: 4a6180ea ("ASoC: rt5514: add rt5514 codec driver") Signed-off-by:
-
Arnd Bergmann authored
commit 0527873b upstream. gcc-7 warns about some declarations that are more 'const' than necessary: arch/arm/mach-at91/pm.c:338:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const ramc_ids[] __initconst = { arch/arm/mach-bcm/bcm_kona_smc.c:36:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const bcm_kona_smc_ids[] __initconst = { arch/arm/mach-spear/time.c:207:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const timer_of_match[] __initconst = { arch/arm/mach-omap2/prm_common.c:714:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = { arch/arm/mach-omap2/vc.c:562:35: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = { The ones in arch/arm were apparently all introduced accidentally by one commit that correctly marked a lot of variables as __initconst. Fixes: 19c233b7 ("ARM: appropriate __init annotation for const data") Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Nicolas Pitre <nico@linaro.org> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by:
-
Arnd Bergmann authored
commit f6aafac1 upstream. aarch64-linux-gcc-7 complains about code it doesn't fully understand: drivers/infiniband/hw/qib/qib_iba7322.c: In function 'qib_7322_txchk_change': include/asm-generic/bitops/non-atomic.h:105:35: error: 'shadow' may be used uninitialized in this function [-Werror=maybe-uninitialized] The code is right, and despite trying hard, I could not come up with a version that I liked better than just adding a fake initialization here to shut up the warning. Fixes: f931551b ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters") Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Len Brown authored
[ Upstream commit 22048c54 ] turbostat displays a GFXMHz column, which comes from reading /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz But GFXMHz was not changing, even when a manual cat /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz showed a new value. It turns out that a rewind() on the open file is not sufficient, fflush() (or a close/open) is needed to read fresh values. Reported-by:
Yaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Jon Mason authored
[ Upstream commit 88d1fa70 ] Memory starts at 0x80000000, not 0. 0 "works" due to mirrior of the first 128M of RAM to that address. Anything greater than 128M will quickly find nothing there. Correcting the starting address has everything working again. Signed-off-by:
Jon Mason <jon.mason@broadcom.com> Fixes: 7eb05f6d ("ARM: dts: bcm5301x: Add BCM SVK DT files") Signed-off-by:
-
Gwendal Grignou authored
[ Upstream commit d85fc67d ] Without this patch, failed probe would not free resources like irq. ata port tdev object currently hold a reference to the ata port object. Therefore the ata port object release function will not get called until the ata_tport_release is called. But that would never happen, releasing the last reference of ata port dev is done by scsi_host_release, which is called by ata_host_release when the ata port object is released. The ata device objects actually do not need to explicitly hold a reference to their real counterpart, given the transport objects are the children of these objects and device_add() is call for each child. We know the parent will not be deleted until we call the child's device_del(). Reported-by:
Matthew Whitehead <tedheadster@gmail.com> Tested-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit 67430a39 ] Volatile controls should only be accessed when the firmware is active, currently however writes to these controls will succeed, but the data will be lost, if the firmware is powered down. Update this behaviour such that an error is returned the same as it is for reads. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 08b005f1 ] The sole remaining caller of kmem_zalloc_greedy is bulkstat, which uses it to grab 1-4 pages for staging of inobt records. The infinite loop in the greedy allocation function is causing hangs[1] in generic/269, so just get rid of the greedy allocator in favor of kmem_zalloc_large. This makes bulkstat somewhat more likely to ENOMEM if there's really no pages to spare, but eliminates a source of hangs. [1] http://lkml.kernel.org/r/20170301044634.rgidgdqqiiwsmfpj%40XZHOUW.usersys.redhat.comSigned-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 3b0277f1 ] Most likely a copy & paste error. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Acked-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Fixes: 30021e37 ("i2c: add support for Amlogic Meson I2C controller") Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 568af6de ] Phil Sutter reports that IPv6 AH header matching is broken. From userspace, nft generates bytecode that expects to find the AH header at NFT_PAYLOAD_TRANSPORT_HEADER both for IPv4 and IPv6. However, pktinfo->thoff is set to the inner header after the AH header in IPv6, while in IPv4 pktinfo->thoff points to the AH header indeed. This behaviour is inconsistent. This patch fixes this problem by updating ipv6_find_hdr() to get the IP6_FH_F_AUTH flag so this function stops at the AH header, so both IPv4 and IPv6 pktinfo->thoff point to the AH header. This is also inconsistent when trying to match encapsulated headers: 1) A packet that looks like IPv4 + AH + TCP dport 22 will *not* match. 2) A packet that looks like IPv6 + AH + TCP dport 22 will match. Reported-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Shaohua Li authored
[ Upstream commit 6d399783 ] Commit 57c67df4(md/raid10: submit IO from originating thread instead of md thread) submits bio directly for normal disks but not for replacement disks. There is no point we shouldn't do this for replacement disks. Cc: NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Zhu Yanjun authored
[ Upstream commit 3b12f73a ] In the function rds_ib_setup_qp, the error handle is missing. When some error occurs, it is possible that memory leak occurs. As such, error handle is added. Cc: Joe Jin <joe.jin@oracle.com> Reviewed-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Guanglei Li <guanglei.li@oracle.com> Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Laurent Dufour authored
[ Upstream commit bfc7228b ] The system may panic when initialisation is done when almost all the memory is assigned to the huge pages using the kernel command line parameter hugepage=xxxx. Panic may occur like this: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc000000000302b88 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2048 [ 0.082424] NUMA pSeries Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-15-generic #16-Ubuntu task: c00000021ed01600 task.stack: c00000010d108000 NIP: c000000000302b88 LR: c000000000270e04 CTR: c00000000016cfd0 REGS: c00000010d10b2c0 TRAP: 0300 Not tainted (4.9.0-15-generic) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE>[ 0.082770] CR: 28424422 XER: 00000000 CFAR: c0000000003d28b8 DAR: 0000000000000000 DSISR: 40000000 SOFTE: 1 GPR00: c000000000270e04 c00000010d10b540 c00000000141a300 c00000010fff6300 GPR04: 0000000000000000 00000000026012c0 c00000010d10b630 0000000487ab0000 GPR08: 000000010ee90000 c000000001454fd8 0000000000000000 0000000000000000 GPR12: 0000000000004400 c00000000fb80000 00000000026012c0 00000000026012c0 GPR16: 00000000026012c0 0000000000000000 0000000000000000 0000000000000002 GPR20: 000000000000000c 0000000000000000 0000000000000000 00000000024200c0 GPR24: c0000000016eef48 0000000000000000 c00000010fff7d00 00000000026012c0 GPR28: 0000000000000000 c00000010fff7d00 c00000010fff6300 c00000010d10b6d0 NIP mem_cgroup_soft_limit_reclaim+0xf8/0x4f0 LR do_try_to_free_pages+0x1b4/0x450 Call Trace: do_try_to_free_pages+0x1b4/0x450 try_to_free_pages+0xf8/0x270 __alloc_pages_nodemask+0x7a8/0xff0 new_slab+0x104/0x8e0 ___slab_alloc+0x620/0x700 __slab_alloc+0x34/0x60 kmem_cache_alloc_node_trace+0xdc/0x310 mem_cgroup_init+0x158/0x1c8 do_one_initcall+0x68/0x1d0 kernel_init_freeable+0x278/0x360 kernel_init+0x24/0x170 ret_from_kernel_thread+0x5c/0x74 Instruction dump: eb81ffe0 eba1ffe8 ebc1fff0 ebe1fff8 4e800020 3d230001 e9499a42 3d220004 3929acd8 794a1f24 7d295214 eac90100 <e9360000> 2fa90000 419eff74 3b200000 ---[ end trace 342f5208b00d01b6 ]--- This is a chicken and egg issue where the kernel try to get free memory when allocating per node data in mem_cgroup_init(), but in that path mem_cgroup_soft_limit_reclaim() is called which assumes that these data are allocated. As mem_cgroup_soft_limit_reclaim() is best effort, it should return when these data are not yet allocated. This patch also fixes potential null pointer access in mem_cgroup_remove_from_trees() and mem_cgroup_update_tree(). Link: http://lkml.kernel.org/r/1487856999-16581-2-git-send-email-ldufour@linux.vnet.ibm.comSigned-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Balbir Singh <bsingharora@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Oleksandr Tyshchenko authored
[ Upstream commit ed46e66c ] Do a check for already installed leaf entry at the current level before dereferencing it in order to avoid walking the page table down with wrong pointer to the next level. Signed-off-by:
Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> CC: Will Deacon <will.deacon@arm.com> CC: Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Dou Liyang authored
[ Upstream commit 2b85b3d2 ] The following commits: f7c28833 ("x86/acpi: Enable acpi to register all possible cpus at boot time") and 8f54969d ("x86/acpi: Introduce persistent storage for cpuid <-> apicid mapping") ... registered all the possible CPUs at boot time via ACPI tables to make the mapping of cpuid <-> apicid fixed. Both enabled and disabled CPUs could have a logical CPU ID after boot time. But, ACPI tables are unreliable. the number amd order of Local APIC entries which depends on the firmware is often inconsistent with the physical devices. Even if they are consistent, The disabled CPUs which take up some logical CPU IDs will also make the order discontinuous. Revert the part of disabled CPUs registration, keep the allocation logic of logical CPU IDs and also keep some code location changes. Signed-off-by:
Dou Liyang <douly.fnst@cn.fujitsu.com> Tested-by:
Xiaolong Ye <xiaolong.ye@intel.com> Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: guzheng1@huawei.com Cc: izumi.taku@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1488528147-2279-4-git-send-email-douly.fnst@cn.fujitsu.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit 6e7408ac ] Fix the debugfs interface for PID tuning to actually update pid_params.sample_rate_ns on PID parameters updates, as changing pid_params.sample_rate_ms via debugfs has no effect now. Fixes: a4675fbc (cpufreq: intel_pstate: Replace timers with utilization update callbacks) Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
-
Nathan Fontenot authored
[ Upstream commit 9501df3c ] The pointer array for the tx/rx sub crqs should be free'ed when releasing the tx/rx sub crqs. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
-
Jason Yan authored
[ Upstream commit 05fae7bb ] Fixes the following sparse warning: fs/nfs/callback.c:235:21: warning: symbol 'nfs4_cb_sv_ops' was not declared. Should it be static? Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Arvind Yadav authored
[ Upstream commit 74e3f6e6 ] Fix potential NULL pointer dereference and clean up coding style errors (code indent, trailing whitespaces). Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Liping Zhang authored
[ Upstream commit ae5c6821 ] The helper->expect_class_max must be set to the total number of expect_policy minus 1, since we will use the statement "if (class > helper->expect_class_max)" to validate the CTA_EXPECT_CLASS attr in ctnetlink_alloc_expect. So for compatibility, set the helper->expect_class_max to the NFCTH_POLICY_SET_NUM attr's value minus 1. Also: it's invalid when the NFCTH_POLICY_SET_NUM attr's value is zero. 1. this will result "expect_policy = kzalloc(0, GFP_KERNEL);"; 2. we cannot set the helper->expect_class_max to a proper value. So if nla_get_be32(tb[NFCTH_POLICY_SET_NUM]) is zero, report -EINVAL to the userspace. Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
-
Sagi Grimberg authored
[ Upstream commit c248c643 ] If a cpu unplug event has occured, we need to take the minimum of the provided nr_io_queues and the number of online cpus, otherwise we won't be able to connect them as blk-mq mapping won't dispatch to those queues. Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Matt Redfearn authored
[ Upstream commit fb2155e3 ] The vpe_mask member of struct core_boot_config is of type atomic_t, which is a 32bit type. In cps-vec.S this member was being retrieved by a PTR_L macro, which on 64bit systems is a 64bit load. On little endian systems this is OK, since the double word that is retrieved will have the required less significant word in the correct position. However, on big endian systems the less significant word of the load is retrieved from address+4, and the more significant from address+0. The destination register therefore ends up with the required word in the more significant word e.g. when starting the second VP of a big endian 64bit system, the load PTR_L ta2, COREBOOTCFG_VPEMASK(a0) ends up setting register ta2 to 0x0000000300000000 When this value is written to the CPC it is ignored, since it is invalid to write anything larger than 4 bits. This results in any VP other than VP0 in a core failing to start in 64bit big endian systems. Change the load to a 32bit load word instruction to fix the bug. Fixes: f12401d7 ("MIPS: smp-cps: Pull boot config retrieval out of mips_cps_boot_vpes") Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15787/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Thibault Saunier authored
[ Upstream commit d7f3e33d ] In the case of semi planar formats cb and cr are in the same plane in memory, meaning that will be set to 'cb' whatever the format is, and whatever the (packed) order of those components are. Suggested-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
Thibault Saunier <thibault.saunier@osg.samsung.com> Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Acked-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 7d2aa6b8 ] Documentation specifies that SYSMMU should be in blocked state while performing TLB/FLPD cache invalidation, so add needed calls to sysmmu_block/unblock. Fixes: 66a7ed84 ("iommu/exynos: Apply workaround of caching fault page table entries") CC: stable@vger.kernel.org # v4.10+ Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
