- 30 Apr, 2016 40 commits
-
-
Sebastian Ott authored
commit 80c544de upstream. The function measurement block must not cross a page boundary. Ensure that by raising the alignment requirement to the smallest power of 2 larger than the size of the fmb. Fixes: d0b08853 ("s390/pci: performance statistics and debug infrastructure") Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Sebastian Ott authored
commit 6001018a upstream. The software counters are not a part of the function measurement block. Also we do not check for zdev->fmb != NULL when using these counters (function measurement can be toggled at runtime). Just move the software counters to struct zpci_dev. Signed-off-by:
-
Robert Doebbelin authored
commit 7cabc61e upstream. There's a race in fuse_direct_IO(), whereby is_sync_kiocb() is called on an iocb that could have been freed if async io has already completed. The fix in this case is simple and obvious: cache the result before starting io. It was discovered by KASan: kernel: ================================================================== kernel: BUG: KASan: use after free in fuse_direct_IO+0xb1a/0xcc0 at addr ffff88036c414390 Signed-off-by:
Robert Doebbelin <robert@quobyte.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: bcba24cc ("fuse: enable asynchronous processing direct IO") [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Vittorio Gambaletta (VittGam) authored
commit 4061db03 upstream. The clock measurement on the AC'97 audio card found in the IBM ThinkPad X41 will often fail, so add a quirk entry to fix it. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=441087Signed-off-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Aaron Plattner authored
commit 2d369c74 upstream. Vendor ID 0x10de0082 is used by a yet-to-be-named GPU chip. This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is appropriate here. Signed-off-by:
Aaron Plattner <aplattner@nvidia.com> Signed-off-by:
-
Aaron Plattner authored
commit 3ec622f4 upstream. Vendor ID 0x10de0083 is used by a yet-to-be-named GPU chip. This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is appropriate here. Signed-off-by:
-
Xin Long authored
commit 39d2adeb upstream. prior to this patch, at the beginning if we have two paths in one assoc, they may have the same params other than the last_time_heard, it will try the paths like this: 1st cycle try trans1 fail. then trans2 is selected.(cause it's last_time_heard is after trans1). 2nd cycle: try trans2 fail then trans2 is selected.(cause it's last_time_heard is after trans1). 3rd cycle: try trans2 fail then trans2 is selected.(cause it's last_time_heard is after trans1). .... trans1 will never have change to be selected, which is not what we expect. we should keeping round robin all the paths if they are just added at the beginning. So at first every tranport's last_time_heard should be initialized 0, so that we ensure they have the same value at the beginning, only by this, all the transports could get equal chance to be selected. Then for sctp_trans_elect_best, it should return the trans_next one when *trans == *trans_next, so that we can try next if it fails, but now it always return trans. so we can fix it by exchanging these two params when we calls sctp_trans_elect_tie(). Fixes: 4c47af4d ('net: sctp: rework multihoming retransmission path selection to rfc4960') Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Fabio Estevam authored
commit 33b96d2c upstream. Currently we have an incorrect behaviour when multiple devices are present under the weim node. For example: &weim { ... status = "okay"; sram@0,0 { ... status = "okay"; }; mram@0,0 { ... status = "disabled"; }; }; In this case only the 'sram' device should be probed and not 'mram'. However what happens currently is that the status variable is ignored, causing the 'sram' device to be disabled and 'mram' to be enabled. Change the weim_parse_dt() function to use for_each_available_child_of_node()so that the devices marked with 'status = disabled' are not probed. Suggested-by:
Wolfgang Netbal <wolfgang.netbal@sigmatek.at> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Arnd Bergmann authored
commit 13aa38e2 upstream. The Xen framebuffer driver selects the xen keyboard driver, so the latter will be built-in if XEN_FBDEV_FRONTEND=y. However, when CONFIG_INPUT is a loadable module, this configuration cannot work. On mainline kernels, the symbol will be enabled but not used, while in combination with a patch I have to detect such useless configurations, we get the expected link failure: drivers/input/built-in.o: In function `xenkbd_remove': xen-kbdfront.c:(.text+0x2f0): undefined reference to `input_unregister_device' xen-kbdfront.c:(.text+0x30e): undefined reference to `input_unregister_device' This removes the extra "select", as it just causes more trouble than it helps. In theory, some defconfig file might break if it has XEN_FBDEV_FRONTEND in it but not INPUT_XEN_KBDDEV_FRONTEND. The Kconfig fragment we ship in the kernel (kernel/configs/xen.config) however already enables both, and anyone using an old .config file would keep having both enabled. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
David Vrabel <david.vrabel@citrix.com> Fixes: 36c1132e ("xen kconfig: fix select INPUT_XEN_KBDDEV_FRONTEND") Acked-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Max Filippov authored
commit 7de7ac78 upstream. There are XCHAL_NUM_DBREAK registers, clear them all. This also fixes cryptic assembler error message with binutils 2.25 when XCHAL_NUM_DBREAK is 0: as: out of memory allocating 18446744073709551575 bytes after a total of 495616 bytes Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Max Filippov authored
commit 362014c8 upstream. Simulator stdin may be connected to a file, when its end is reached kernel hangs in infinite loop inside rs_poll, because simc_poll always signals that descriptor 0 is readable and simc_read always returns 0. Check simc_read return value and exit loop if it's not positive. Also don't rewind polling timer if it's zero. Signed-off-by:
-
Dmitry Tunin authored
commit 75c6aca4 upstream. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3472 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1552925Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
OGAWA Hirofumi authored
commit c0a2ad9b upstream. On umount path, jbd2_journal_destroy() writes latest transaction ID (->j_tail_sequence) to be used at next mount. The bug is that ->j_tail_sequence is not holding latest transaction ID in some cases. So, at next mount, there is chance to conflict with remaining (not overwritten yet) transactions. mount (id=10) write transaction (id=11) write transaction (id=12) umount (id=10) <= the bug doesn't write latest ID mount (id=10) write transaction (id=11) crash mount [recovery process] transaction (id=11) transaction (id=12) <= valid transaction ID, but old commit must not replay Like above, this bug become the cause of recovery failure, or FS corruption. So why ->j_tail_sequence doesn't point latest ID? Because if checkpoint transactions was reclaimed by memory pressure (i.e. bdev_try_to_free_page()), then ->j_tail_sequence is not updated. (And another case is, __jbd2_journal_clean_checkpoint_list() is called with empty transaction.) So in above cases, ->j_tail_sequence is not pointing latest transaction ID at umount path. Plus, REQ_FLUSH for checkpoint is not done too. So, to fix this problem with minimum changes, this patch updates ->j_tail_sequence, and issue REQ_FLUSH. (With more complex changes, some optimizations would be possible to avoid unnecessary REQ_FLUSH for example though.) BTW, journal->j_tail_sequence = ++journal->j_transaction_sequence; Increment of ->j_transaction_sequence seems to be unnecessary, but ext3 does this. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Douglas Gilbert authored
commit 5ecee0a3 upstream. One of the strange things that the original sg driver did was let the user provide both a data-out buffer (it followed the sg_header+cdb) _and_ specify a reply length greater than zero. What happened was that the user data-out buffer was copied into some kernel buffers and then the mid level was told a read type operation would take place with the data from the device overwriting the same kernel buffers. The user would then read those kernel buffers back into the user space. From what I can tell, the above action was broken by commit fad7f01e ("sg: set dxferp to NULL for READ with the older SG interface") in 2008 and syzkaller found that out recently. Make sure that a user space pointer is passed through when data follows the sg_header structure and command. Fix the abnormal case when a non-zero reply_len is also given. Fixes: fad7f01eSigned-off-by:
Douglas Gilbert <dgilbert@interlog.com> Reviewed-by:
Ewan Milne <emilne@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Mario Kleiner authored
commit 459ee1c3 upstream. As observed on Apple iMac10,1, DCE-3.2, RV-730, link rate of 2.7 Ghz is not selected, because the args.v1.ucConfig flag setting for 2.7 Ghz gets overwritten by a following assignment of the transmitter to use. Move link rate setup a few lines down to fix this. In practice this didn't have any positive or negative effect on display setup on the tested iMac10,1 so i don't know if backporting to stable makes sense or not. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit ff1b1294 upstream. Seems to have problems turning the dGPU on/off. bug: https://bugzilla.kernel.org/show_bug.cgi?id=51381Signed-off-by:
-
Alex Deucher authored
commit 4807c5a8 upstream. Some PX laptops seems to have problems turning the dGPU on/off. Add a quirk list to disable runpm by default on those systems. Also convert the current PX d3 delay handling to a quirk. bug: https://bugzilla.kernel.org/show_bug.cgi?id=51381 https://bugzilla.kernel.org/show_bug.cgi?id=74551Signed-off-by:
-
Maurizio Lombardi authored
commit 84bd6499 upstream. In beiscsi_setup_boot_info(), the boot_kset pointer should be set to NULL in case of failure otherwise an invalid pointer dereference may occur later. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Jitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by:
-
Bjorn Helgaas authored
commit b8941571 upstream. The Home Agent and PCU PCI devices in Broadwell-EP have a non-BAR register where a BAR should be. We don't know what the side effects of sizing the "BAR" would be, and we don't know what address space the "BAR" might appear to describe. Mark these devices as having non-compliant BARs so the PCI core doesn't touch them. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Tested-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Eric Wheeler authored
commit f8b11260 upstream. When bch_cache_set_alloc() fails to kzalloc the cache_set, the asyncronous closure handling tries to dereference a cache_set that hadn't yet been allocated inside of cache_set_flush() which is called by __cache_set_unregister() during cleanup. This appears to happen only during an OOM condition on bcache_register. Signed-off-by:
Eric Wheeler <bcache@linux.ewheeler.net> Signed-off-by:
-
Eric Wheeler authored
commit 9b299728 upstream. Fix null pointer dereference by changing register_cache() to return an int instead of being void. This allows it to return -ENOMEM or -ENODEV and enables upper layers to handle the OOM case without NULL pointer issues. See this thread: http://thread.gmane.org/gmane.linux.kernel.bcache.devel/3521 Fixes this error: gargamel:/sys/block/md5/bcache# echo /dev/sdh2 > /sys/fs/bcache/register bcache: register_cache() error opening sdh2: cannot allocate memory BUG: unable to handle kernel NULL pointer dereference at 00000000000009b8 IP: [<ffffffffc05a7e8d>] cache_set_flush+0x102/0x15c [bcache] PGD 120dff067 PUD 1119a3067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: veth ip6table_filter ip6_tables (...) CPU: 4 PID: 3371 Comm: kworker/4:3 Not tainted 4.4.2-amd64-i915-volpreempt-20160213bc1 #3 Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013 Workqueue: events cache_set_flush [bcache] task: ffff88020d5dc280 ti: ffff88020b6f8000 task.ti: ffff88020b6f8000 RIP: 0010:[<ffffffffc05a7e8d>] [<ffffffffc05a7e8d>] cache_set_flush+0x102/0x15c [bcache] Signed-off-by:
Marc MERLIN <marc@merlins.org> Signed-off-by:
-
Kent Overstreet authored
commit d83353b3 upstream. Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Signed-off-by:
-
Chris Friesen authored
commit f9c904b7 upstream. The callers of steal_account_process_tick() expect it to return whether a jiffy should be considered stolen or not. Currently the return value of steal_account_process_tick() is in units of cputime, which vary between either jiffies or nsecs depending on CONFIG_VIRT_CPU_ACCOUNTING_GEN. If cputime has nsecs granularity and there is a tiny amount of stolen time (a few nsecs, say) then we will consider the entire tick stolen and will not account the tick on user/system/idle, causing /proc/stats to show invalid data. The fix is to change steal_account_process_tick() to accumulate the stolen time and only account it once it's worth a jiffy. (Thanks to Frederic Weisbecker for suggestions to fix a bug in my first version of the patch.) Signed-off-by:
Chris Friesen <chris.friesen@windriver.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/56DBBDB8.40305@mail.usask.caSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andi Kleen authored
commit e17dc653 upstream. Jiri reported some time ago that some entries in the PEBS data source table in perf do not agree with the SDM. We investigated and the bits changed for Sandy Bridge, but the SDM was not updated. perf already implements the bits correctly for Sandy Bridge and later. This patch patches it up for Nehalem and Westmere. Signed-off-by:
-
Stephane Eranian authored
commit 8077eca0 upstream. This patch fixes an issue with the GLOBAL_OVERFLOW_STATUS bits on Haswell, Broadwell and Skylake processors when using PEBS. The SDM stipulates that when the PEBS iterrupt threshold is crossed, an interrupt is posted and the kernel is interrupted. The kernel will find GLOBAL_OVF_SATUS bit 62 set indicating there are PEBS records to drain. But the bits corresponding to the actual counters should NOT be set. The kernel follows the SDM and assumes that all PEBS events are processed in the drain_pebs() callback. The kernel then checks for remaining overflows on any other (non-PEBS) events and processes these in the for_each_bit_set(&status) loop. As it turns out, under certain conditions on HSW and later processors, on PEBS buffer interrupt, bit 62 is set but the counter bits may be set as well. In that case, the kernel drains PEBS and generates SAMPLES with the EXACT tag, then it processes the counter bits, and generates normal (non-EXACT) SAMPLES. I ran into this problem by trying to understand why on HSW sampling on a PEBS event was sometimes returning SAMPLES without the EXACT tag. This should not happen on user level code because HSW has the eventing_ip which always point to the instruction that caused the event. The workaround in this patch simply ensures that the bits for the counters used for PEBS events are cleared after the PEBS buffer has been drained. With this fix 100% of the PEBS samples on my user code report the EXACT tag. Before: $ perf record -e cpu/event=0xd0,umask=0x81/upp ./multichase $ perf report -D | fgrep SAMPLES PERF_RECORD_SAMPLE(IP, 0x2): 11775/11775: 0x406de5 period: 73469 addr: 0 exact=Y \--- EXACT tag is missing After: $ perf record -e cpu/event=0xd0,umask=0x81/upp ./multichase $ perf report -D | fgrep SAMPLES PERF_RECORD_SAMPLE(IP, 0x4002): 11775/11775: 0x406de5 period: 73469 addr: 0 exact=Y \--- EXACT tag is set The problem tends to appear more often when multiple PEBS events are used. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Stephane Eranian authored
commit 5690ae28 upstream. This patch adds a definition for GLOBAL_OVFL_STATUS bit 55 which is used with the Processor Trace (PT) feature. Signed-off-by:
-
Kan Liang authored
commit c3d266c8 upstream. This patch tries to fix a PEBS warning found in my stress test. The following perf command can easily trigger the pebs warning or spurious NMI error on Skylake/Broadwell/Haswell platforms: sudo perf record -e 'cpu/umask=0x04,event=0xc4/pp,cycles,branches,ref-cycles,cache-misses,cache-references' --call-graph fp -b -c1000 -a Also the NMI watchdog must be enabled. For this case, the events number is larger than counter number. So perf has to do multiplexing. In perf_mux_hrtimer_handler, it does perf_pmu_disable(), schedule out old events, rotate_ctx, schedule in new events and finally perf_pmu_enable(). If the old events include precise event, the MSR_IA32_PEBS_ENABLE should be cleared when perf_pmu_disable(). The MSR_IA32_PEBS_ENABLE should keep 0 until the perf_pmu_enable() is called and the new event is precise event. However, there is a corner case which could restore PEBS_ENABLE to stale value during the above period. In perf_pmu_disable(), GLOBAL_CTRL will be set to 0 to stop overflow and followed PMI. But there may be pending PMI from an earlier overflow, which cannot be stopped. So even GLOBAL_CTRL is cleared, the kernel still be possible to get PMI. At the end of the PMI handler, __intel_pmu_enable_all() will be called, which will restore the stale values if old events haven't scheduled out. Once the stale pebs value is set, it's impossible to be corrected if the new events are non-precise. Because the pebs_enabled will be set to 0. x86_pmu.enable_all() will ignore the MSR_IA32_PEBS_ENABLE setting. As a result, the following NMI with stale PEBS_ENABLE trigger pebs warning. The pending PMI after enabled=0 will become harmless if the NMI handler does not change the state. This patch checks cpuc->enabled in pmi and only restore the state when PMU is active. Here is the dump: Call Trace: <NMI> [<ffffffff813c3a2e>] dump_stack+0x63/0x85 [<ffffffff810a46f2>] warn_slowpath_common+0x82/0xc0 [<ffffffff810a483a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8100fe2e>] intel_pmu_drain_pebs_nhm+0x2be/0x320 [<ffffffff8100caa9>] intel_pmu_handle_irq+0x279/0x460 [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40 [<ffffffff811f290d>] ? vunmap_page_range+0x20d/0x330 [<ffffffff811f2f11>] ? unmap_kernel_range_noflush+0x11/0x20 [<ffffffff8148379f>] ? ghes_copy_tofrom_phys+0x10f/0x2a0 [<ffffffff814839c8>] ? ghes_read_estatus+0x98/0x170 [<ffffffff81005a7d>] perf_event_nmi_handler+0x2d/0x50 [<ffffffff810310b9>] nmi_handle+0x69/0x120 [<ffffffff810316f6>] default_do_nmi+0xe6/0x100 [<ffffffff810317f2>] do_nmi+0xe2/0x130 [<ffffffff817aea71>] end_repeat_nmi+0x1a/0x1e [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40 [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40 [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40 <<EOE>> <IRQ> [<ffffffff81006df8>] ? x86_perf_event_set_period+0xd8/0x180 [<ffffffff81006eec>] x86_pmu_start+0x4c/0x100 [<ffffffff8100722d>] x86_pmu_enable+0x28d/0x300 [<ffffffff811994d7>] perf_pmu_enable.part.81+0x7/0x10 [<ffffffff8119cb70>] perf_mux_hrtimer_handler+0x200/0x280 [<ffffffff8119c970>] ? __perf_install_in_context+0xc0/0xc0 [<ffffffff8110f92d>] __hrtimer_run_queues+0xfd/0x280 [<ffffffff811100d8>] hrtimer_interrupt+0xa8/0x190 [<ffffffff81199080>] ? __perf_read_group_add.part.61+0x1a0/0x1a0 [<ffffffff81051bd8>] local_apic_timer_interrupt+0x38/0x60 [<ffffffff817af01d>] smp_apic_timer_interrupt+0x3d/0x50 [<ffffffff817ad15c>] apic_timer_interrupt+0x8c/0xa0 <EOI> [<ffffffff81199080>] ? __perf_read_group_add.part.61+0x1a0/0x1a0 [<ffffffff81123de5>] ? smp_call_function_single+0xd5/0x130 [<ffffffff81123ddb>] ? smp_call_function_single+0xcb/0x130 [<ffffffff81199080>] ? __perf_read_group_add.part.61+0x1a0/0x1a0 [<ffffffff8119765a>] event_function_call+0x10a/0x120 [<ffffffff8119c660>] ? ctx_resched+0x90/0x90 [<ffffffff811971e0>] ? cpu_clock_event_read+0x30/0x30 [<ffffffff811976d0>] ? _perf_event_disable+0x60/0x60 [<ffffffff8119772b>] _perf_event_enable+0x5b/0x70 [<ffffffff81197388>] perf_event_for_each_child+0x38/0xa0 [<ffffffff811976d0>] ? _perf_event_disable+0x60/0x60 [<ffffffff811a0ffd>] perf_ioctl+0x12d/0x3c0 [<ffffffff8134d855>] ? selinux_file_ioctl+0x95/0x1e0 [<ffffffff8124a3a1>] do_vfs_ioctl+0xa1/0x5a0 [<ffffffff81036d29>] ? sched_clock+0x9/0x10 [<ffffffff8124a919>] SyS_ioctl+0x79/0x90 [<ffffffff817ac4b2>] entry_SYSCALL_64_fastpath+0x1a/0xa4 ---[ end trace aef202839fe9a71d ]--- Uhhuh. NMI received for unknown reason 2d on CPU 2. Do you have a strange power saving mode enabled? Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
-
Jiri Olsa authored
commit e72daf3f upstream. Using PAGE_SIZE buffers makes the WRMSR to PERF_GLOBAL_CTRL in intel_pmu_enable_all() mysteriously hang on Core2. As a workaround, we don't do this. The hard lockup is easily triggered by running 'perf test attr' repeatedly. Most of the time it gets stuck on sample session with small periods. # perf test attr -vv 14: struct perf_event_attr setup : --- start --- ... 'PERF_TEST_ATTR=/tmp/tmpuEKz3B /usr/bin/perf record -o /tmp/tmpuEKz3B/perf.data -c 123 kill >/dev/null 2>&1' ret 1 Reported-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
-
Alexander Shishkin authored
commit 927a5570 upstream. The error path in perf_event_open() is such that asking for a sampling event on a PMU that doesn't generate interrupts will end up in dropping the perf_sched_count even though it hasn't been incremented for this event yet. Given a sufficient amount of these calls, we'll end up disabling scheduler's jump label even though we'd still have active events in the system, thereby facilitating the arrival of the infernal regions upon us. I'm fixing this by moving account_event() inside perf_event_alloc(). Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Borislav Petkov authored
commit f594bae0 upstream. I'm surprised this remained undocumented since at least 2011. And it is actually a very useful switch, as Steve and I came to realize recently. Add the text from 2cba3ffb ("perf stat: Add -d -d and -d -d -d options to show more CPU events") which added the incrementing aspect to -d. Tested-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Anthony Wong authored
commit f36f2990 upstream. Add USB ID 0411:01fd for Buffalo WLI-UC-G450 wireless adapter, RT chipset 3593 Signed-off-by:
Anthony Wong <anthony.wong@ubuntu.com> Acked-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
-
Amitkumar Karwar authored
commit a6139b62 upstream. This patch corrects the error case in association path by returning -1. Earlier "media_connected" used to remain on in this error case causing failure for further association attempts. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Fixes: b887664d ('mwifiex: channel switch handling for station') Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
-
Marco Angaroni authored
commit 7617a24f upstream. The IPVS SIP persistence engine is not able to parse the SIP header "Call-ID" when such header is inserted in the first positions of the SIP message. When IPVS is configured with "--pe sip" option, like for example: ipvsadm -A -u 1.2.3.4:5060 -s rr --pe sip -p 120 -o some particular messages (see below for details) do not create entries in the connection template table, which can be listed with: ipvsadm -Lcn --persistent-conn Problematic SIP messages are SIP responses having "Call-ID" header positioned just after message first line: SIP/2.0 200 OK [Call-ID header here] [rest of the headers] When "Call-ID" header is positioned down (after a few other headers) it is correctly recognized. This is due to the data offset used in get_callid function call inside ip_vs_pe_sip.c file: since dptr already points to the start of the SIP message, the value of dataoff should be initially 0. Otherwise the header is searched starting from some bytes after the first character of the SIP message. Fixes: 758ff033 ("IPVS: sip persistence engine") Signed-off-by:
Marco Angaroni <marcoangaroni@gmail.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Thomas Gleixner authored
commit e9532e69 upstream. On CPU hotplug the steal time accounting can keep a stale rq->prev_steal_time value over CPU down and up. So after the CPU comes up again the delta calculation in steal_account_process_tick() wreckages itself due to the unsigned math: u64 steal = paravirt_steal_clock(smp_processor_id()); steal -= this_rq()->prev_steal_time; So if steal is smaller than rq->prev_steal_time we end up with an insane large value which then gets added to rq->prev_steal_time, resulting in a permanent wreckage of the accounting. As a consequence the per CPU stats in /proc/stat become stale. Nice trick to tell the world how idle the system is (100%) while the CPU is 100% busy running tasks. Though we prefer realistic numbers. None of the accounting values which use a previous value to account for fractions is reset at CPU hotplug time. update_rq_clock_task() has a sanity check for prev_irq_time and prev_steal_time_rq, but that sanity check solely deals with clock warps and limits the /proc/stat visible wreckage. The prev_time values are still wrong. Solution is simple: Reset rq->prev_*_time when the CPU is plugged in again. Signed-off-by:
Rik van Riel <riel@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: commit 095c0aa8 "sched: adjust scheduler cpu power for stolen time" Fixes: commit aa483808 "sched: Remove irq time from available CPU power" Fixes: commit e6e6685a "KVM guest: Steal time accounting" Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1603041539490.3686@nanosSigned-off-by:
-
Radim Krčmář authored
commit 7dd0fdff upstream. Discard policy uses ack_notifiers to prevent injection of PIT interrupts before EOI from the last one. This patch changes the policy to always try to deliver the interrupt, which makes a difference when its vector is in ISR. Old implementation would drop the interrupt, but proposed one injects to IRR, like real hardware would. The old policy breaks legacy NMI watchdogs, where PIT is used through virtual wire (LVT0): PIT never sends an interrupt before receiving EOI, thus a guest deadlock with disabled interrupts will stop NMIs. Note that NMI doesn't do EOI, so PIT also had to send a normal interrupt through IOAPIC. (KVM's PIT is deeply rotten and luckily not used much in modern systems.) Even though there is a chance of regressions, I think we can fix the LVT0 NMI bug without introducing a new tick policy. Reported-by:
Yuki Shibuya <shibuya.yk@ncos.nec.co.jp> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Oliver Neukum authored
commit 0d5ce778 upstream. A typo of j for i led to a logic bug. To rule out future confusion, the variable names are made meaningful. Signed-off-by:
Oliver Neukum <ONeukum@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Vinayak Menon authored
commit e53b50c0 upstream. early_init_dt_alloc_reserved_memory_arch passes end as 0 to __memblock_alloc_base, when limits are not specified. But __memblock_alloc_base takes end value of 0 as MEMBLOCK_ALLOC_ACCESSIBLE and limits the end to memblock.current_limit. This results in regions never being placed in HIGHMEM area, for e.g. CMA. Let __memblock_alloc_base allocate from anywhere in memory if limits are not specified. Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Loc Ho authored
commit 0f4c7a13 upstream. In the initial fix for non-zero divider shift value, the parenthesis was missing after the negate operation. This patch adds the required parenthesis. Otherwise, lower bits may be cleared unintentionally. Signed-off-by:
Loc Ho <lho@apm.com> Acked-by:
Toan Le <toanle@apm.com> Fixes: 1382ea63 ("clk: xgene: Fix divider with non-zero shift value") Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Asai Thambi SP authored
commit d8a18d2d upstream. Prevent standby immediate command from being issued in remove, suspend and shutdown paths, while drive is in FTL rebuild process. Signed-off-by:
Selvan Mani <smani@micron.com> Signed-off-by:
Vignesh Gunasekaran <vgunasekaran@micron.com> Signed-off-by:
Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Asai Thambi SP authored
commit e35b9473 upstream. Remove setting and clearing MTIP_PF_EH_ACTIVE_BIT flag in mtip_handle_tfe() as they are redundant. Also avoid waking up service thread from mtip_handle_tfe() because it is already woken up in case of taskfile error. Signed-off-by:
Rajesh Kumar Sambandam <rsambandam@micron.com> Signed-off-by:
-
