- 10 Dec, 2017 38 commits
-
-
Dave Hansen authored
[ Upstream commit da20ab35 ] We do not have tracepoints for sys_modify_ldt() because we define it directly instead of using the normal SYSCALL_DEFINEx() macros. However, there is a reason sys_modify_ldt() does not use the macros: it has an 'int' return type instead of 'unsigned long'. This is a bug, but it's a bug cemented in the ABI. What does this mean? If we return -EINVAL from a function that returns 'int', we have 0x00000000ffffffea in %rax. But, if we return -EINVAL from a function returning 'unsigned long', we end up with 0xffffffffffffffea in %rax, which is wrong. To work around this and maintain the 'int' behavior while using the SYSCALL_DEFINEx() macros, so we add a cast to 'unsigned int' in both implementations of sys_modify_ldt(). Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by:
Andy Lutomirski <luto@kernel.org> Reviewed-by:
Brian Gerst <brgerst@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171018172107.1A79C532@viggo.jf.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masami Hiramatsu authored
[ Upstream commit a30b85df ] We want to wait for all potentially preempted kprobes trampoline execution to have completed. This guarantees that any freed trampoline memory is not in use by any task in the system anymore. synchronize_rcu_tasks() gives such a guarantee, so use it. Also, this guarantees to wait for all potentially preempted tasks on the instructions which will be replaced with a jump. Since this becomes a problem only when CONFIG_PREEMPT=y, enable CONFIG_TASKS_RCU=y for synchronize_rcu_tasks() in that case. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/150845661962.5443.17724352636247312231.stgit@devboxSigned-off-by:
-
Aaron Sierra authored
[ Upstream commit 0ab84da2 ] The upper four bits of the XR17V35x fractional divisor register (DLD) control general chip function (RS-485 direction pin polarity, multidrop mode, XON/XOFF parity check, and fast IR mode). Don't allow these bits to be clobbered when setting the baudrate. Signed-off-by:
Aaron Sierra <asierra@xes-inc.com> Signed-off-by:
-
Reinette Chatre authored
[ Upstream commit 87943db7 ] Sai reported a warning during some MBA tests: [ 236.755559] ====================================================== [ 236.762443] WARNING: possible circular locking dependency detected [ 236.769328] 4.14.0-rc4-yocto-standard #8 Not tainted [ 236.774857] ------------------------------------------------------ [ 236.781738] mount/10091 is trying to acquire lock: [ 236.787071] (cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff8117f892>] static_key_enable+0x12/0x30 [ 236.797058] but task is already holding lock: [ 236.803552] (&type->s_umount_key#37/1){+.+.}, at: [<ffffffff81208b2f>] sget_userns+0x32f/0x520 [ 236.813247] which lock already depends on the new lock. [ 236.822353] the existing dependency chain (in reverse order) is: [ 236.830686] -> #4 (&type->s_umount_key#37/1){+.+.}: [ 236.837756] __lock_acquire+0x1100/0x11a0 [ 236.842799] lock_acquire+0xdf/0x1d0 [ 236.847363] down_write_nested+0x46/0x80 [ 236.852310] sget_userns+0x32f/0x520 [ 236.856873] kernfs_mount_ns+0x7e/0x1f0 [ 236.861728] rdt_mount+0x30c/0x440 [ 236.866096] mount_fs+0x38/0x150 [ 236.870262] vfs_kern_mount+0x67/0x150 [ 236.875015] do_mount+0x1df/0xd50 [ 236.879286] SyS_mount+0x95/0xe0 [ 236.883464] entry_SYSCALL_64_fastpath+0x18/0xad [ 236.889183] -> #3 (rdtgroup_mutex){+.+.}: [ 236.895292] __lock_acquire+0x1100/0x11a0 [ 236.900337] lock_acquire+0xdf/0x1d0 [ 236.904899] __mutex_lock+0x80/0x8f0 [ 236.909459] mutex_lock_nested+0x1b/0x20 [ 236.914407] intel_rdt_online_cpu+0x3b/0x4a0 [ 236.919745] cpuhp_invoke_callback+0xce/0xb80 [ 236.925177] cpuhp_thread_fun+0x1c5/0x230 [ 236.930222] smpboot_thread_fn+0x11a/0x1e0 [ 236.935362] kthread+0x152/0x190 [ 236.939536] ret_from_fork+0x27/0x40 [ 236.944097] -> #2 (cpuhp_state-up){+.+.}: [ 236.950199] __lock_acquire+0x1100/0x11a0 [ 236.955241] lock_acquire+0xdf/0x1d0 [ 236.959800] cpuhp_issue_call+0x12e/0x1c0 [ 236.964845] __cpuhp_setup_state_cpuslocked+0x13b/0x2f0 [ 236.971242] __cpuhp_setup_state+0xa7/0x120 [ 236.976483] page_writeback_init+0x43/0x67 [ 236.981623] pagecache_init+0x38/0x3b [ 236.986281] start_kernel+0x3c6/0x41a [ 236.990931] x86_64_start_reservations+0x2a/0x2c [ 236.996650] x86_64_start_kernel+0x72/0x75 [ 237.001793] verify_cpu+0x0/0xfb [ 237.005966] -> #1 (cpuhp_state_mutex){+.+.}: [ 237.012364] __lock_acquire+0x1100/0x11a0 [ 237.017408] lock_acquire+0xdf/0x1d0 [ 237.021969] __mutex_lock+0x80/0x8f0 [ 237.026527] mutex_lock_nested+0x1b/0x20 [ 237.031475] __cpuhp_setup_state_cpuslocked+0x54/0x2f0 [ 237.037777] __cpuhp_setup_state+0xa7/0x120 [ 237.043013] page_alloc_init+0x28/0x30 [ 237.047769] start_kernel+0x148/0x41a [ 237.052425] x86_64_start_reservations+0x2a/0x2c [ 237.058145] x86_64_start_kernel+0x72/0x75 [ 237.063284] verify_cpu+0x0/0xfb [ 237.067456] -> #0 (cpu_hotplug_lock.rw_sem){++++}: [ 237.074436] check_prev_add+0x401/0x800 [ 237.079286] __lock_acquire+0x1100/0x11a0 [ 237.084330] lock_acquire+0xdf/0x1d0 [ 237.088890] cpus_read_lock+0x42/0x90 [ 237.093548] static_key_enable+0x12/0x30 [ 237.098496] rdt_mount+0x406/0x440 [ 237.102862] mount_fs+0x38/0x150 [ 237.107035] vfs_kern_mount+0x67/0x150 [ 237.111787] do_mount+0x1df/0xd50 [ 237.116058] SyS_mount+0x95/0xe0 [ 237.120233] entry_SYSCALL_64_fastpath+0x18/0xad [ 237.125952] other info that might help us debug this: [ 237.134867] Chain exists of: cpu_hotplug_lock.rw_sem --> rdtgroup_mutex --> &type->s_umount_key#37/1 [ 237.148425] Possible unsafe locking scenario: [ 237.155015] CPU0 CPU1 [ 237.160057] ---- ---- [ 237.165100] lock(&type->s_umount_key#37/1); [ 237.169952] lock(rdtgroup_mutex); [ 237.176641] lock(&type->s_umount_key#37/1); [ 237.184287] lock(cpu_hotplug_lock.rw_sem); [ 237.189041] *** DEADLOCK *** When the resctrl filesystem is mounted the locks must be acquired in the same order as was done when the cpus came online: cpu_hotplug_lock before rdtgroup_mutex. This also requires to switch the static_branch_enable() calls to the _cpulocked variant because now cpu hotplug lock is held already. [ tglx: Switched to cpus_read_[un]lock ] Reported-by:
Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Tested-by:
Vikas Shivappa <vikas.shivappa@linux.intel.com> Cc: fenghua.yu@intel.com Cc: tony.luck@intel.com Link: https://lkml.kernel.org/r/9c41b91bc2f47d9e95b62b213ecdb45623c47a9f.1508490116.git.reinette.chatre@intel.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Reinette Chatre authored
[ Upstream commit 95953034 ] The platform informs via CPUID.(EAX=0x10, ECX=res#):EBX[31:0] (valid res# are only 1 for L3 and 2 for L2) which unit of the allocation may be used by other entities in the platform. This information is valid whether CDP (Code and Data Prioritization) is enabled or not. Ensure that the bitmask of shareable resource is initialized when CDP is enabled. Fixes: 0dd2d749 ("x86/intel_rdt: Show bitmask of shareable resource with other executing units" Signed-off-by:
Fenghua Yu <fenghua.yu@intel.com> Acked-by:
Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/815747bddc820ca221a8924edaf4d1a7324547e4.1508490116.git.reinette.chatre@intel.comSigned-off-by:
-
Kishon Vijay Abraham I authored
[ Upstream commit 7a4db656 ] PCI core access configuration space registers in resume_noirq callbacks. In the case of dra7xx, PIPE3 PHY connected to PCIe controller has to be enabled before accessing configuration space registers. Since PIPE3 PHY is enabled by only configuring control module registers, no aborts has been observed so far (though during noirq stage, interface clock of PIPE3 PHY is not enabled). With new TRM updates, PIPE3 PHY has to be initialized (PIPE3 PHY registers has to be accessed) as well which requires the interface clock of PIPE3 PHY to be enabled. The interface clock of PIPE3 PHY is derived from OCP2SCP and hence PCIe PHY is modeled as a child of OCP2SCP. Since pm_runtime is not enabled during noirq stage, pm_runtime_get_sync done in phy_init doesn't enable OCP2SCP clocks resulting in abort when PIPE3 PHY registers are accessed. Create a function dependency between PCIe and PHY here to make sure PCIe is suspended before PCIe PHY/OCP2SCP and resumed after PCIe PHY/OCP2SCP. Suggested-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit ce035409 ] If devm_extcon_dev_allocate() fails, we should disable clk before return. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: 860d2686 ("usb: phy: tahvo: Use devm_extcon_dev_[allocate|register]() and replace deprecated API") Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit a9cd8194 ] Event timestamps are serialized using ctx->lock, make sure to hold it over reading all values. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Edward A. James authored
[ Upstream commit 6dcf2fb5 ] The pmbus core may call read/write word data functions with a page value of -1, intending to perform the operation without setting the page. However, the read/write word data functions accept only unsigned 8-bit page numbers, and therefore cannot check for negative page number to avoid setting the page. This results in setting the page number to 0xFF. This may result in errors or undefined behavior of some devices (specifically the ir35221, which allows the page to be set to 0xFF, but some subsequent operations to read registers may fail). Switch the pmbus_set_page page parameter to an integer and perform the check for negative page there. Make read/write functions consistent in accepting an integer page number parameter. Signed-off-by:
Edward A. James <eajames@us.ibm.com> Fixes: cbcdec62 ("hwmon: (pmbus): Access word data for STATUS_WORD") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Subhash Jadavani authored
[ Upstream commit c7ccee22 ] SDCC controller reset (SW_RST) during probe may trigger power irq if previous status of PWRCTL was either BUS_ON or IO_HIGH_V. So before we enable the power irq interrupt in GIC (by registering the interrupt handler), we need to ensure that any pending power irq interrupt status is acknowledged otherwise power irq interrupt handler would be fired prematurely. Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Vijay Viswanath <vviswana@codeaurora.org> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Fabrizio Castro authored
[ Upstream commit a3d95d1d ] mmc_regulator_get_supply returns -EPROBE_DEFER if either vmmc or vqmmc regulators had their probing deferred. vqmmc regulator is needed by UHS to work properly, therefore this patch checks the value returned by mmc_regulator_get_supply to make sure we have a reference to both vmmc and vqmmc (if found in the DT). Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by:
-
Johan Hovold authored
[ Upstream commit 4d5e0689 ] Take an extra reference to the controller before deregistering it to prevent use-after-free in the interrupt handler in case an interrupt fires before the line is disabled. Fixes: b1353d1c ("spi: Add Analog Devices AXI SPI Engine controller support") Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Hiromitsu Yamasaki authored
[ Upstream commit 36735783 ] DMA supports 32-bit words only, even if BITLEN1 of SITMDR2 register is 16bit. Fixes: b0d0ce8b ("spi: sh-msiof: Add DMA support") Signed-off-by:
Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 123c0aab ] There is a check on pmlmepriv before dereferencing it when vfree'ing pmlmepriv->free_bss_buf however the previous call to rtw_free_mlme_priv_ie_data deferences pmlmepriv causing a null pointer deference if it is null. Avoid this by also calling rtw_free_mlme_priv_ie_data if the pointer is non-null. Detected by CoverityScan, CID#1230262 ("Dereference before null check") Fixes: 7b464c9f ("staging: r8188eu: Add files for new driver - part 4") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Stanislaw Gruszka authored
[ Upstream commit c40a45a4 ] Patch fixes splat: r8822be 0000:04:00.0: DMA-API: device driver frees DMA memory with different size [device address=0x0000000078477000] [map size=4096 bytes] [unmap size=424 bytes] <snip> Call Trace: debug_dma_unmap_page+0xa5/0xb0 ? unmap_single+0x2f/0x40 _rtl8822be_send_bcn_or_cmd_packet+0x2c5/0x300 [r8822be] ? _rtl8822be_send_bcn_or_cmd_packet+0x2c5/0x300 [r8822be] rtl8822b_halmac_cb_write_data_rsvd_page+0x51/0xc0 [r8822be] _halmac_write_data_rsvd_page+0x22/0x30 [r8822be] halmac_download_rsvd_page_88xx+0xee/0x1f0 [r8822be] halmac_dlfw_to_mem_88xx+0x80/0x120 [r8822be] halmac_download_firmware_88xx.part.47+0x477/0x600 [r8822be] halmac_download_firmware_88xx+0x32/0x40 [r8822be] rtl_halmac_dlfw+0x70/0x120 [r8822be] rtl_halmac_init_hal+0x5f/0x1b0 [r8822be] rtl8822be_hw_init+0x8a2/0x1040 [r8822be] Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 3236a965 ] This driver's ->rs485_config callback checks if SER_RS485_RTS_ON_SEND and SER_RS485_RTS_AFTER_SEND have the same value. If they do, it means the user has passed in invalid data with the TIOCSRS485 ioctl() since RTS must have a different polarity when sending and when not sending. In this case, rs485 mode is not enabled (the RS485_URA bit is not set in the RS485 Enable Register) and this is supposed to be signaled back to the user by clearing the SER_RS485_ENABLED bit in struct serial_rs485 ... except a missing tilde character is preventing that from happening. Fixes: 28e3fb6c ("serial: Add support for Fintek F81216A LPC to 4 UART") Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: "Ji-Ze Hong (Peter Hong)" <hpeter@gmail.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Greg Ungerer authored
[ Upstream commit f55ab8f2 ] The m68k pg_data_table is a fix size array defined in arch/m68k/mm/init.c. Index numbers within it are defined based on memory size. But for Coldfire these don't take into account a non-zero physical RAM base address, and this causes us to access past the end of this array at system start time. Change the node shift calculation so that we keep the index inside its range. Reported-by:
Angelo Dureghello <angelo@sysam.it> Tested-by:
Greg Ungerer <gerg@linux-m68k.org> Signed-off-by:
-
Bryan O'Donoghue authored
[ Upstream commit 44b02da3 ] Commit 12927835 ("greybus: loopback: Add asynchronous bi-directional support") does what it says on the tin - namely, adds support for asynchronous bi-directional loopback operations. What it neglects to do though is increment the per-connection gb->iteration_count on an asynchronous operation error. This patch fixes that omission. Fixes: 12927835 ("greybus: loopback: Add asynchronous bi-directional support") Signed-off-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Reported-by:
Mitch Tasman <tasman@leaflabs.com> Reviewed-by:
-
Andy Lutomirski authored
[ Upstream commit d60ad744 ] Bits 19:16 of LAR's result are undefined, and some upcoming improvements to the test case seem to trigger this. Mask off those bits to avoid spurious failures. commit 5b781c7e ("x86/tls: Forcibly set the accessed bit in TLS segments") adds a valid case in which LAR's output doesn't quite agree with set_thread_area()'s input. This isn't triggered in the test as is, but it will be if we start calling set_thread_area() with the accessed bit clear. Work around this discrepency. I've added a Fixes tag so that -stable can pick this up if neccesary. Signed-off-by:
-
Andy Lutomirski authored
[ Upstream commit fec8f5ae ] We weren't testing the .limit and .limit_in_pages fields very well. Add more tests. This addition seems to trigger the "bits 16:19 are undefined" issue that was fixed in an earlier patch. I think that, at least on my CPU, the high nibble of the limit ends in LAR bits 16:19. Signed-off-by:
-
Christian Borntraeger authored
[ Upstream commit 48070c73 ] As of today QEMU does not provide the AIS facility to its guest. This prevents Linux guests from using PCI devices as the ais facility is checked during init. As this is just a performance optimization, we can move the ais check into the code where we need it (calling the SIC instruction). This is used at initialization and on interrupt. Both places do not require any serialization, so we can simply skip the instruction. Since we will now get all interrupts, we can also avoid the 2nd scan. As we can have multiple interrupts in parallel we might trigger spurious irqs more often for the non-AIS case but the core code can handle that. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by:
Halil Pasic <pasic@linux.vnet.ibm.com> Acked-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Ulf Hansson authored
[ Upstream commit 5241ab40 ] During system-wide PM, genpd relies on its PM callbacks to be invoked for all its attached devices, as to deal with powering off/on the PM domain. In other words, genpd is not compatible with the direct_complete path, if executed by the PM core for any of its attached devices. However, when genpd's ->prepare() callback invokes pm_generic_prepare(), it does not take into account that it may return 1. Instead it treats that as an error internally and expects the PM core to abort the prepare phase and roll back. This leads to genpd not properly powering on/off the PM domain, because its internal counters gets wrongly balanced. To fix the behaviour, allow drivers to return 1 from their ->prepare() callbacks, but let's return 0 from genpd's ->prepare() callback in such case, as that prevents the PM core from running the direct_complete path for the device. Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jason J. Herne authored
[ Upstream commit 408358b5 ] Because we do not make use of the cda (channel data address) for test, no-op ccws no address translation takes place. This means cda could contain a guest address which we do not want to attempt to free. Let's check the command type and skip cda free when it is not needed. For a TIC ccw, ccw->cda points to either a ccw in an existing chain or it points to a whole new allocated chain. In either case the data will be freed when the owning chain is freed. Signed-off-by:
Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by:
Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Boshi Wang authored
[ Upstream commit ebe7c0a7 ] The hash_setup function always sets the hash_setup_done flag, even when the hash algorithm is invalid. This prevents the default hash algorithm defined as CONFIG_IMA_DEFAULT_HASH from being used. This patch sets hash_setup_done flag only for valid hash algorithms. Fixes: e7a2ad7e "ima: enable support for larger default filedata hash algorithms" Signed-off-by:
Boshi Wang <wangboshi@huawei.com> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Matt Redfearn authored
commit c8ec2041 upstream. Add a custom serial.h header for MIPS, allowing platforms to override the asm-generic version if required. The generic platform uses this header to set BASE_BAUD to 0. The generic platform supports multiple boards, which may have different UART clocks. Also one of the boards supported is the Boston FPGA board, where the UART clock depends on the loaded FPGA bitfile. As such there is no way that the generic kernel can set a compile time default BASE_BAUD. Commit 31cb9a85 ("earlycon: initialise baud field of earlycon device structure") changed the behavior of of_setup_earlycon such that any baud rate set in the device tree is now set in the earlycon structure. The UART driver will then calculate a divisor based on BASE_BAUD and set it. With MIPS generic kernels this resulted in garbage output due to the incorrect uart clock rate being used to calculate a divisor. This commit, combined with "serial: 8250_early: Only set divisor if valid clk & baud" prevents the earlycon code setting a bad divisor and restores earlycon output. Fixes: 31cb9a85 ("earlycon: initialise baud field of earlycon device structure") Signed-off-by:
Matt Redfearn <matt.redfearn@mips.com> Signed-off-by:
-
Matt Redfearn authored
commit 0ff3ab70 upstream. If either uartclk or baud are 0, avoid calculating and setting a divisor based on them since the output will almost certainly be garbage. This also allows platforms such as the MIPS generic kernel, which has no way to know a valid BASE_BASE for the board it is actually booted on at compile time, to set BASE_BAUD to 0 and avoid early_8250 setting a bad divisor. This fixes a regression caused by commit 31cb9a85 ("earlycon: initialise baud field of earlycon device structure"), which changed the behavior of of_setup_earlycon such that it sets a baud rate in the earlycon structure where previously it was left as 0. All boards supported by the MIPS generic kernel started outputting garbage from the boot console due to an incorrect divisor being set. Fixes: 31cb9a85 ("earlycon: initialise baud field of earlycon device structure") Signed-off-by:
-
Lu Baolu authored
commit 762ff467 upstream. USB vendor id and product id for Linux USB Debug Target is added. Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
-
Sebastian Sjoholm authored
commit c654b21e upstream. Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development board (EVB). The USB id is added to option.c to allow DIAG,GPS,AT and modem communication with the BG96. Signed-off-by:
Sebastian Sjoholm <ssjoholm@mac.com> Signed-off-by:
-
Martijn Coenen authored
commit fb2c4452 upstream. If a call to put_user() fails, we failed to properly free a transaction and send a failed reply (if necessary). Signed-off-by:
Martijn Coenen <maco@android.com> Signed-off-by:
-
Matt Wilson authored
commit 3bfd1300 upstream. This device will be used in future Amazon EC2 instances as the primary serial port (i.e., data sent to this port will be available via the GetConsoleOuput [1] EC2 API). [1] http://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetConsoleOutput.htmlSigned-off-by:
Matt Wilson <msw@amazon.com> Signed-off-by:
-
Kai-Heng Feng authored
commit e43a12f1 upstream. KY-688 USB 3.1 Type-C Hub internally uses a Genesys Logic hub to connect to Realtek r8153. Similar to commit ("7496cfe5 usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter"), no-lpm can make r8153 ethernet work. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Hans de Goede authored
commit 7fee72d5 upstream. We've been adding this as a quirk on a per device basis hoping that newer disk enclosures would do better, but that has not happened, so simply apply this quirk to all Seagate devices. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Yuyang Du authored
commit 770b2ede upstream. The previous USB3 SuperSpeed enabling patches mistakenly enabled URB scatter-gather chaining, which is actually not supported by the VHCI HCD. This patch fixes that. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197867 Fixes: 03cd00d5 ("usbip: vhci-hcd: Set the vhci structure up to work") Reported-by:
Juan Zea <juan.zea@qindel.com> Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Shuah Khan authored
commit 1ac7c8a7 upstream. usbip attach fails to find a free port when the device on the first port is a USB_SPEED_SUPER device and non-super speed device is being attached. It keeps checking the first port and returns without a match getting stuck in a loop. Fix it check to find the first port with matching speed. Reported-by:
-
Heiko Carstens authored
commit 8d9047f8 upstream. Free data structures required for runtime instrumentation from arch_release_task_struct(). This allows to simplify the code a bit, and also makes the semantics a bit easier: arch_release_task_struct() is never called from the task that is being removed. In addition this allows to get rid of exit_thread() in a later patch. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Michel Dänzer authored
commit fa7c7939 upstream. This matches the corresponding UAPI fields. Treating the ring index as signed could result in accessing random unrelated memory if the MSB was set. Fixes: effd924d ("drm/amdgpu: untie user ring ids from kernel ring ids v6") Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Stefan Agner authored
commit 9fd99f4f upstream. The resume helpers wait for a vblank to occurre hence IRQ need to be enabled. This avoids a warning as follows during resume: WARNING: CPU: 0 PID: 314 at drivers/gpu/drm/drm_atomic_helper.c:1249 drm_atomic_helper_wait_for_vblanks.part.1+0x284/0x288 [CRTC:28:crtc-0] vblank wait timed out Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Stefan Agner authored
commit 9306e996 upstream. With commit 0a70c998 ("drm/fsl-dcu: enable pixel clock when enabling CRTC") the pixel clock is controlled by the CRTC code. Disabling the pixel clock in suspend leads to a warning due to the second clk_disable_unprepare call: WARNING: CPU: 0 PID: 359 at drivers/clk/clk.c:594 clk_core_disable+0x8c/0x90 Remove clk_disable_unprepare call for pixel clock to avoid unbalanced clock disable on suspend. Fixes: 0a70c998 ("drm/fsl-dcu: enable pixel clock when enabling CRTC") Signed-off-by:
-
- 05 Dec, 2017 2 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit f9a64e23 which is commit 0d794d0d upstream. Andy writes: I think the thing to do is to revert the patch from -stable. The bug it fixes is very minor, and the regression is that it made a pre-existing bug in some nearly-undebuggable core resume code much easier to hit. I don't feel comfortable with a backport of the latter fix until it has a good long soak in Linus' tree. Reported-by:
-
